* [PULL 01/13] tests: don't run socat tests on MacOS as well
2023-02-23 15:57 [PULL 00/13] testing updates (gitlab, cirrus, docker, avocado, windows) Alex Bennée
@ 2023-02-23 15:57 ` Alex Bennée
2023-02-23 15:57 ` [PULL 02/13] tests: add socat dependency for tests Alex Bennée
` (13 subsequent siblings)
14 siblings, 0 replies; 21+ messages in thread
From: Alex Bennée @ 2023-02-23 15:57 UTC (permalink / raw)
To: qemu-devel
Cc: peter.maydell, Alex Bennée, Philippe Mathieu-Daudé,
Daniel P. Berrangé
In preparation for the next patch when we enable socat for our CI
images we need to disable this part of the test for MacOS. The bug has
been raised here:
https://gitlab.com/qemu-project/qemu/-/issues/1495
Once that is fixed we should re-enable the test.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230221094558.2864616-3-alex.bennee@linaro.org>
diff --git a/tests/unit/test-io-channel-command.c b/tests/unit/test-io-channel-command.c
index 425e2f5594..04b75ab3b4 100644
--- a/tests/unit/test-io-channel-command.c
+++ b/tests/unit/test-io-channel-command.c
@@ -31,7 +31,7 @@
static char *socat = NULL;
-#ifndef _WIN32
+#if !defined(_WIN32) && !defined(CONFIG_DARWIN)
static void test_io_channel_command_fifo(bool async)
{
g_autofree gchar *tmpdir = g_dir_make_tmp("qemu-test-io-channel.XXXXXX", NULL);
@@ -128,7 +128,7 @@ int main(int argc, char **argv)
socat = g_find_program_in_path("socat");
-#ifndef _WIN32
+#if !defined(_WIN32) && !defined(CONFIG_DARWIN)
g_test_add_func("/io/channel/command/fifo/sync",
test_io_channel_command_fifo_sync);
g_test_add_func("/io/channel/command/fifo/async",
--
2.39.1
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PULL 02/13] tests: add socat dependency for tests
2023-02-23 15:57 [PULL 00/13] testing updates (gitlab, cirrus, docker, avocado, windows) Alex Bennée
2023-02-23 15:57 ` [PULL 01/13] tests: don't run socat tests on MacOS as well Alex Bennée
@ 2023-02-23 15:57 ` Alex Bennée
2023-02-23 15:57 ` [PULL 03/13] tests: be a bit more strict cleaning up fifos Alex Bennée
` (12 subsequent siblings)
14 siblings, 0 replies; 21+ messages in thread
From: Alex Bennée @ 2023-02-23 15:57 UTC (permalink / raw)
To: qemu-devel
Cc: peter.maydell, Alex Bennée, Philippe Mathieu-Daudé,
Marc-André Lureau, Ed Maste, Li-Wen Hsu, Thomas Huth,
Wainer dos Santos Moschetta, Beraldo Leal
We only use it for test-io-channel-command at the moment.
Unfortunately bringing socat into CI exposed an existing bug in the
test-io-channel-command unit test so we disabled it for MacOS in the
previous patch.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230221094558.2864616-4-alex.bennee@linaro.org>
diff --git a/.gitlab-ci.d/cirrus/freebsd-12.vars b/.gitlab-ci.d/cirrus/freebsd-12.vars
index 8934e5d57f..44d8a2a511 100644
--- a/.gitlab-ci.d/cirrus/freebsd-12.vars
+++ b/.gitlab-ci.d/cirrus/freebsd-12.vars
@@ -11,6 +11,6 @@ MAKE='/usr/local/bin/gmake'
NINJA='/usr/local/bin/ninja'
PACKAGING_COMMAND='pkg'
PIP3='/usr/local/bin/pip-3.8'
-PKGS='alsa-lib bash bison bzip2 ca_root_nss capstone4 ccache cdrkit-genisoimage cmocka ctags curl cyrus-sasl dbus diffutils dtc flex fusefs-libs3 gettext git glib gmake gnutls gsed gtk3 json-c libepoxy libffi libgcrypt libjpeg-turbo libnfs libslirp libspice-server libssh libtasn1 llvm lzo2 meson ncurses nettle ninja opencv pixman pkgconf png py39-numpy py39-pillow py39-pip py39-sphinx py39-sphinx_rtd_theme py39-yaml python3 rpm2cpio sdl2 sdl2_image snappy sndio spice-protocol tesseract usbredir virglrenderer vte3 zstd'
+PKGS='alsa-lib bash bison bzip2 ca_root_nss capstone4 ccache cdrkit-genisoimage cmocka ctags curl cyrus-sasl dbus diffutils dtc flex fusefs-libs3 gettext git glib gmake gnutls gsed gtk3 json-c libepoxy libffi libgcrypt libjpeg-turbo libnfs libslirp libspice-server libssh libtasn1 llvm lzo2 meson ncurses nettle ninja opencv pixman pkgconf png py39-numpy py39-pillow py39-pip py39-sphinx py39-sphinx_rtd_theme py39-yaml python3 rpm2cpio sdl2 sdl2_image snappy sndio socat spice-protocol tesseract usbredir virglrenderer vte3 zstd'
PYPI_PKGS=''
PYTHON='/usr/local/bin/python3'
diff --git a/.gitlab-ci.d/cirrus/freebsd-13.vars b/.gitlab-ci.d/cirrus/freebsd-13.vars
index 65ce456c48..7622c849b2 100644
--- a/.gitlab-ci.d/cirrus/freebsd-13.vars
+++ b/.gitlab-ci.d/cirrus/freebsd-13.vars
@@ -11,6 +11,6 @@ MAKE='/usr/local/bin/gmake'
NINJA='/usr/local/bin/ninja'
PACKAGING_COMMAND='pkg'
PIP3='/usr/local/bin/pip-3.8'
-PKGS='alsa-lib bash bison bzip2 ca_root_nss capstone4 ccache cdrkit-genisoimage cmocka ctags curl cyrus-sasl dbus diffutils dtc flex fusefs-libs3 gettext git glib gmake gnutls gsed gtk3 json-c libepoxy libffi libgcrypt libjpeg-turbo libnfs libslirp libspice-server libssh libtasn1 llvm lzo2 meson ncurses nettle ninja opencv pixman pkgconf png py39-numpy py39-pillow py39-pip py39-sphinx py39-sphinx_rtd_theme py39-yaml python3 rpm2cpio sdl2 sdl2_image snappy sndio spice-protocol tesseract usbredir virglrenderer vte3 zstd'
+PKGS='alsa-lib bash bison bzip2 ca_root_nss capstone4 ccache cdrkit-genisoimage cmocka ctags curl cyrus-sasl dbus diffutils dtc flex fusefs-libs3 gettext git glib gmake gnutls gsed gtk3 json-c libepoxy libffi libgcrypt libjpeg-turbo libnfs libslirp libspice-server libssh libtasn1 llvm lzo2 meson ncurses nettle ninja opencv pixman pkgconf png py39-numpy py39-pillow py39-pip py39-sphinx py39-sphinx_rtd_theme py39-yaml python3 rpm2cpio sdl2 sdl2_image snappy sndio socat spice-protocol tesseract usbredir virglrenderer vte3 zstd'
PYPI_PKGS=''
PYTHON='/usr/local/bin/python3'
diff --git a/.gitlab-ci.d/cirrus/macos-12.vars b/.gitlab-ci.d/cirrus/macos-12.vars
index 65b78fa08f..da6aa6469b 100644
--- a/.gitlab-ci.d/cirrus/macos-12.vars
+++ b/.gitlab-ci.d/cirrus/macos-12.vars
@@ -11,6 +11,6 @@ MAKE='/opt/homebrew/bin/gmake'
NINJA='/opt/homebrew/bin/ninja'
PACKAGING_COMMAND='brew'
PIP3='/opt/homebrew/bin/pip3'
-PKGS='bash bc bison bzip2 capstone ccache cmocka ctags curl dbus diffutils dtc flex gcovr gettext git glib gnu-sed gnutls gtk+3 jemalloc jpeg-turbo json-c libepoxy libffi libgcrypt libiscsi libnfs libpng libslirp libssh libtasn1 libusb llvm lzo make meson ncurses nettle ninja pixman pkg-config python3 rpm2cpio sdl2 sdl2_image snappy sparse spice-protocol tesseract usbredir vde vte3 zlib zstd'
+PKGS='bash bc bison bzip2 capstone ccache cmocka ctags curl dbus diffutils dtc flex gcovr gettext git glib gnu-sed gnutls gtk+3 jemalloc jpeg-turbo json-c libepoxy libffi libgcrypt libiscsi libnfs libpng libslirp libssh libtasn1 libusb llvm lzo make meson ncurses nettle ninja pixman pkg-config python3 rpm2cpio sdl2 sdl2_image snappy socat sparse spice-protocol tesseract usbredir vde vte3 zlib zstd'
PYPI_PKGS='PyYAML numpy pillow sphinx sphinx-rtd-theme'
PYTHON='/opt/homebrew/bin/python3'
diff --git a/tests/docker/dockerfiles/alpine.docker b/tests/docker/dockerfiles/alpine.docker
index 4a569d82f6..56cf14e553 100644
--- a/tests/docker/dockerfiles/alpine.docker
+++ b/tests/docker/dockerfiles/alpine.docker
@@ -94,6 +94,7 @@ RUN apk update && \
sed \
snappy-dev \
sndio-dev \
+ socat \
sparse \
spice-dev \
spice-protocol \
diff --git a/tests/docker/dockerfiles/centos8.docker b/tests/docker/dockerfiles/centos8.docker
index fbc953c6dc..1291ae1b04 100644
--- a/tests/docker/dockerfiles/centos8.docker
+++ b/tests/docker/dockerfiles/centos8.docker
@@ -105,6 +105,7 @@ RUN dnf distro-sync -y && \
rpm \
sed \
snappy-devel \
+ socat \
spice-protocol \
spice-server-devel \
systemd-devel \
diff --git a/tests/docker/dockerfiles/debian-amd64-cross.docker b/tests/docker/dockerfiles/debian-amd64-cross.docker
index 5175095a85..856db95100 100644
--- a/tests/docker/dockerfiles/debian-amd64-cross.docker
+++ b/tests/docker/dockerfiles/debian-amd64-cross.docker
@@ -52,6 +52,7 @@ RUN export DEBIAN_FRONTEND=noninteractive && \
python3-yaml \
rpm2cpio \
sed \
+ socat \
sparse \
tar \
tesseract-ocr \
diff --git a/tests/docker/dockerfiles/debian-amd64.docker b/tests/docker/dockerfiles/debian-amd64.docker
index b61f664ea2..e3dba71ad5 100644
--- a/tests/docker/dockerfiles/debian-amd64.docker
+++ b/tests/docker/dockerfiles/debian-amd64.docker
@@ -120,6 +120,7 @@ RUN export DEBIAN_FRONTEND=noninteractive && \
python3-yaml \
rpm2cpio \
sed \
+ socat \
sparse \
systemtap-sdt-dev \
tar \
diff --git a/tests/docker/dockerfiles/debian-arm64-cross.docker b/tests/docker/dockerfiles/debian-arm64-cross.docker
index b69958c69f..b00e9e9bcf 100644
--- a/tests/docker/dockerfiles/debian-arm64-cross.docker
+++ b/tests/docker/dockerfiles/debian-arm64-cross.docker
@@ -52,6 +52,7 @@ RUN export DEBIAN_FRONTEND=noninteractive && \
python3-yaml \
rpm2cpio \
sed \
+ socat \
sparse \
tar \
tesseract-ocr \
diff --git a/tests/docker/dockerfiles/debian-armel-cross.docker b/tests/docker/dockerfiles/debian-armel-cross.docker
index 96b524fab6..fb1129f256 100644
--- a/tests/docker/dockerfiles/debian-armel-cross.docker
+++ b/tests/docker/dockerfiles/debian-armel-cross.docker
@@ -52,6 +52,7 @@ RUN export DEBIAN_FRONTEND=noninteractive && \
python3-yaml \
rpm2cpio \
sed \
+ socat \
sparse \
tar \
tesseract-ocr \
diff --git a/tests/docker/dockerfiles/debian-armhf-cross.docker b/tests/docker/dockerfiles/debian-armhf-cross.docker
index 08a75cebdb..7a2b864a38 100644
--- a/tests/docker/dockerfiles/debian-armhf-cross.docker
+++ b/tests/docker/dockerfiles/debian-armhf-cross.docker
@@ -52,6 +52,7 @@ RUN export DEBIAN_FRONTEND=noninteractive && \
python3-yaml \
rpm2cpio \
sed \
+ socat \
sparse \
tar \
tesseract-ocr \
diff --git a/tests/docker/dockerfiles/debian-mips64el-cross.docker b/tests/docker/dockerfiles/debian-mips64el-cross.docker
index 5930e6fa5d..5a3340e964 100644
--- a/tests/docker/dockerfiles/debian-mips64el-cross.docker
+++ b/tests/docker/dockerfiles/debian-mips64el-cross.docker
@@ -52,6 +52,7 @@ RUN export DEBIAN_FRONTEND=noninteractive && \
python3-yaml \
rpm2cpio \
sed \
+ socat \
sparse \
tar \
tesseract-ocr \
diff --git a/tests/docker/dockerfiles/debian-mipsel-cross.docker b/tests/docker/dockerfiles/debian-mipsel-cross.docker
index c65d9830e7..422fdebe8f 100644
--- a/tests/docker/dockerfiles/debian-mipsel-cross.docker
+++ b/tests/docker/dockerfiles/debian-mipsel-cross.docker
@@ -52,6 +52,7 @@ RUN export DEBIAN_FRONTEND=noninteractive && \
python3-yaml \
rpm2cpio \
sed \
+ socat \
sparse \
tar \
tesseract-ocr \
diff --git a/tests/docker/dockerfiles/debian-ppc64el-cross.docker b/tests/docker/dockerfiles/debian-ppc64el-cross.docker
index 2ae56c978e..78d7ae6211 100644
--- a/tests/docker/dockerfiles/debian-ppc64el-cross.docker
+++ b/tests/docker/dockerfiles/debian-ppc64el-cross.docker
@@ -52,6 +52,7 @@ RUN export DEBIAN_FRONTEND=noninteractive && \
python3-yaml \
rpm2cpio \
sed \
+ socat \
sparse \
tar \
tesseract-ocr \
diff --git a/tests/docker/dockerfiles/debian-s390x-cross.docker b/tests/docker/dockerfiles/debian-s390x-cross.docker
index 0db86a0fcd..d06ea3605a 100644
--- a/tests/docker/dockerfiles/debian-s390x-cross.docker
+++ b/tests/docker/dockerfiles/debian-s390x-cross.docker
@@ -52,6 +52,7 @@ RUN export DEBIAN_FRONTEND=noninteractive && \
python3-yaml \
rpm2cpio \
sed \
+ socat \
sparse \
tar \
tesseract-ocr \
diff --git a/tests/docker/dockerfiles/fedora-win32-cross.docker b/tests/docker/dockerfiles/fedora-win32-cross.docker
index b659c0b8a8..21ed1c6081 100644
--- a/tests/docker/dockerfiles/fedora-win32-cross.docker
+++ b/tests/docker/dockerfiles/fedora-win32-cross.docker
@@ -52,6 +52,7 @@ exec "$@"' > /usr/bin/nosync && \
python3-sphinx_rtd_theme \
rpm \
sed \
+ socat \
sparse \
spice-protocol \
tar \
diff --git a/tests/docker/dockerfiles/fedora-win64-cross.docker b/tests/docker/dockerfiles/fedora-win64-cross.docker
index 0a404c15bf..95d30e7936 100644
--- a/tests/docker/dockerfiles/fedora-win64-cross.docker
+++ b/tests/docker/dockerfiles/fedora-win64-cross.docker
@@ -52,6 +52,7 @@ exec "$@"' > /usr/bin/nosync && \
python3-sphinx_rtd_theme \
rpm \
sed \
+ socat \
sparse \
spice-protocol \
tar \
diff --git a/tests/docker/dockerfiles/fedora.docker b/tests/docker/dockerfiles/fedora.docker
index 5d60a96141..8e06d080b8 100644
--- a/tests/docker/dockerfiles/fedora.docker
+++ b/tests/docker/dockerfiles/fedora.docker
@@ -113,6 +113,7 @@ exec "$@"' > /usr/bin/nosync && \
rpm \
sed \
snappy-devel \
+ socat \
sparse \
spice-protocol \
spice-server-devel \
diff --git a/tests/docker/dockerfiles/opensuse-leap.docker b/tests/docker/dockerfiles/opensuse-leap.docker
index 4b2c02d6ab..568c1c979f 100644
--- a/tests/docker/dockerfiles/opensuse-leap.docker
+++ b/tests/docker/dockerfiles/opensuse-leap.docker
@@ -104,6 +104,7 @@ RUN zypper update -y && \
sed \
snappy-devel \
sndio-devel \
+ socat \
sparse \
spice-protocol-devel \
systemd-devel \
diff --git a/tests/docker/dockerfiles/ubuntu2004.docker b/tests/docker/dockerfiles/ubuntu2004.docker
index 13ab0b6887..f34d88d33d 100644
--- a/tests/docker/dockerfiles/ubuntu2004.docker
+++ b/tests/docker/dockerfiles/ubuntu2004.docker
@@ -119,6 +119,7 @@ RUN export DEBIAN_FRONTEND=noninteractive && \
python3-yaml \
rpm2cpio \
sed \
+ socat \
sparse \
systemtap-sdt-dev \
tar \
diff --git a/tests/lcitool/projects/qemu.yml b/tests/lcitool/projects/qemu.yml
index 6467bcf08a..2854748f49 100644
--- a/tests/lcitool/projects/qemu.yml
+++ b/tests/lcitool/projects/qemu.yml
@@ -101,6 +101,7 @@ packages:
- sed
- snappy
- sndio
+ - socat
- sparse
- spice-protocol
- spice-server
--
2.39.1
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PULL 03/13] tests: be a bit more strict cleaning up fifos
2023-02-23 15:57 [PULL 00/13] testing updates (gitlab, cirrus, docker, avocado, windows) Alex Bennée
2023-02-23 15:57 ` [PULL 01/13] tests: don't run socat tests on MacOS as well Alex Bennée
2023-02-23 15:57 ` [PULL 02/13] tests: add socat dependency for tests Alex Bennée
@ 2023-02-23 15:57 ` Alex Bennée
2023-02-23 15:57 ` [PULL 04/13] tests: make fp-test less chatty when running from test suite Alex Bennée
` (11 subsequent siblings)
14 siblings, 0 replies; 21+ messages in thread
From: Alex Bennée @ 2023-02-23 15:57 UTC (permalink / raw)
To: qemu-devel
Cc: peter.maydell, Alex Bennée, Philippe Mathieu-Daudé,
Thomas Huth, Richard Henderson, Daniel P. Berrangé
When we re-factored we dropped the unlink() step which turns out to be
required for rmdir to do its thing. If we had been checking the return
value we would have noticed so lets do that with this fix.
Fixes: 68406d1085 (tests/unit: cleanups for test-io-channel-command)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230221094558.2864616-5-alex.bennee@linaro.org>
diff --git a/tests/unit/test-io-channel-command.c b/tests/unit/test-io-channel-command.c
index 04b75ab3b4..c6e66a8c33 100644
--- a/tests/unit/test-io-channel-command.c
+++ b/tests/unit/test-io-channel-command.c
@@ -42,6 +42,7 @@ static void test_io_channel_command_fifo(bool async)
g_auto(GStrv) dstargv = g_strsplit(dstargs, " ", -1);
QIOChannel *src, *dst;
QIOChannelTest *test;
+ int err;
if (mkfifo(fifo, 0600)) {
g_error("mkfifo: %s", strerror(errno));
@@ -61,7 +62,10 @@ static void test_io_channel_command_fifo(bool async)
object_unref(OBJECT(src));
object_unref(OBJECT(dst));
- g_rmdir(tmpdir);
+ err = g_unlink(fifo);
+ g_assert(err == 0);
+ err = g_rmdir(tmpdir);
+ g_assert(err == 0);
}
static void test_io_channel_command_fifo_async(void)
--
2.39.1
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PULL 04/13] tests: make fp-test less chatty when running from test suite
2023-02-23 15:57 [PULL 00/13] testing updates (gitlab, cirrus, docker, avocado, windows) Alex Bennée
` (2 preceding siblings ...)
2023-02-23 15:57 ` [PULL 03/13] tests: be a bit more strict cleaning up fifos Alex Bennée
@ 2023-02-23 15:57 ` Alex Bennée
2023-02-23 15:57 ` [PULL 05/13] gitlab-ci: Use artifacts instead of dumping logs in the Cirrus-CI jobs Alex Bennée
` (10 subsequent siblings)
14 siblings, 0 replies; 21+ messages in thread
From: Alex Bennée @ 2023-02-23 15:57 UTC (permalink / raw)
To: qemu-devel; +Cc: peter.maydell, Alex Bennée, Thomas Huth, Aurelien Jarno
As we like to run tests under CI with V=1 flags the softfloat tests
can add up to a fair amount of extra log lines. With an update to the
testfloat library we can now call fp-test with the -q flag and reduce
the output to a terse one line per function tested.
make check-softfloat V=1 | wc -l
759
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230221094558.2864616-6-alex.bennee@linaro.org>
diff --git a/tests/fp/fp-test.c b/tests/fp/fp-test.c
index 35829ad5f7..36b5712cda 100644
--- a/tests/fp/fp-test.c
+++ b/tests/fp/fp-test.c
@@ -106,7 +106,8 @@ static const char commands_string[] =
" -l = thoroughness level (1 (default), 2)\n"
" -r = rounding mode (even (default), zero, down, up, tieaway, odd)\n"
" Set to 'all' to test all rounding modes, if applicable\n"
- " -s = stop when a test fails";
+ " -s = stop when a test fails\n"
+ " -q = minimise noise when testing, just show each function being tested";
static void usage_complete(int argc, char *argv[])
{
@@ -190,9 +191,11 @@ static void do_testfloat(int op, int rmode, bool exact)
ab_f128M_z_bool true_ab_f128M_z_bool;
ab_f128M_z_bool subj_ab_f128M_z_bool;
- fputs(">> Testing ", stderr);
- verCases_writeFunctionName(stderr);
- fputs("\n", stderr);
+ if (verCases_verbosity) {
+ fputs(">> Testing ", stderr);
+ verCases_writeFunctionName(stderr);
+ fputs("\n", stderr);
+ }
if (!is_allowed(op, rmode)) {
not_implemented();
@@ -837,7 +840,7 @@ static void parse_args(int argc, char *argv[])
int c;
for (;;) {
- c = getopt(argc, argv, "he:f:l:r:s");
+ c = getopt(argc, argv, "he:f:l:r:sq");
if (c < 0) {
break;
}
@@ -874,9 +877,15 @@ static void parse_args(int argc, char *argv[])
}
}
break;
+ /*
+ * The following flags are declared in testfloat/source/verCases_common.c
+ */
case 's':
verCases_errorStop = true;
break;
+ case 'q':
+ verCases_verbosity = 0;
+ break;
case '?':
/* invalid option or missing argument; getopt prints error info */
exit(EXIT_FAILURE);
diff --git a/tests/fp/berkeley-testfloat-3 b/tests/fp/berkeley-testfloat-3
index 5a59dcec19..40619cbb3b 160000
--- a/tests/fp/berkeley-testfloat-3
+++ b/tests/fp/berkeley-testfloat-3
@@ -1 +1 @@
-Subproject commit 5a59dcec19327396a011a17fd924aed4fec416b3
+Subproject commit 40619cbb3bf32872df8c53cc457039229428a263
diff --git a/tests/fp/meson.build b/tests/fp/meson.build
index 312a4d301f..f9ca6a93b4 100644
--- a/tests/fp/meson.build
+++ b/tests/fp/meson.build
@@ -609,7 +609,7 @@ softfloat_tests = {
# The full test suite can take a bit of time, default to a quick run
# "-l 2 -r all" can take more than a day for some operations and is best
# run manually
-fptest_args = ['-s', '-l', '1']
+fptest_args = ['-q', '-s', '-l', '1']
fptest_rounding_args = ['-r', 'all']
# Conversion Routines:
--
2.39.1
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PULL 05/13] gitlab-ci: Use artifacts instead of dumping logs in the Cirrus-CI jobs
2023-02-23 15:57 [PULL 00/13] testing updates (gitlab, cirrus, docker, avocado, windows) Alex Bennée
` (3 preceding siblings ...)
2023-02-23 15:57 ` [PULL 04/13] tests: make fp-test less chatty when running from test suite Alex Bennée
@ 2023-02-23 15:57 ` Alex Bennée
2023-02-23 15:57 ` [PULL 06/13] gitlab: extend custom runners with base_job_template Alex Bennée
` (9 subsequent siblings)
14 siblings, 0 replies; 21+ messages in thread
From: Alex Bennée @ 2023-02-23 15:57 UTC (permalink / raw)
To: qemu-devel
Cc: peter.maydell, Thomas Huth, Daniel P . Berrangé,
Alex Bennée, Philippe Mathieu-Daudé,
Wainer dos Santos Moschetta, Beraldo Leal
From: Thomas Huth <thuth@redhat.com>
The meson log files can get very big, especially if running the tests in
verbose mode. So dumping those logs to the console was a bad idea, since
gitlab truncates the output if it is getting too big. Let's publish the
logs as artifacts instead. This has the disadvantage that you have to
look up the logs on cirrus-ci.com now instead, but that's still better
than not having the important part of the log at all since it got
truncated.
Fixes: 998f334722 ("gitlab: show testlog.txt contents ...")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230215142503.90660-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230221094558.2864616-7-alex.bennee@linaro.org>
diff --git a/.gitlab-ci.d/cirrus/build.yml b/.gitlab-ci.d/cirrus/build.yml
index 7ef6af8d33..a9444902ec 100644
--- a/.gitlab-ci.d/cirrus/build.yml
+++ b/.gitlab-ci.d/cirrus/build.yml
@@ -32,6 +32,9 @@ build_task:
- $MAKE -j$(sysctl -n hw.ncpu)
- for TARGET in $TEST_TARGETS ;
do
- $MAKE -j$(sysctl -n hw.ncpu) $TARGET V=1
- || { cat meson-logs/testlog.txt; exit 1; } ;
+ $MAKE -j$(sysctl -n hw.ncpu) $TARGET V=1 ;
done
+ always:
+ build_result_artifacts:
+ path: build/meson-logs/*log.txt
+ type: text/plain
--
2.39.1
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PULL 06/13] gitlab: extend custom runners with base_job_template
2023-02-23 15:57 [PULL 00/13] testing updates (gitlab, cirrus, docker, avocado, windows) Alex Bennée
` (4 preceding siblings ...)
2023-02-23 15:57 ` [PULL 05/13] gitlab-ci: Use artifacts instead of dumping logs in the Cirrus-CI jobs Alex Bennée
@ 2023-02-23 15:57 ` Alex Bennée
2023-02-23 15:57 ` [PULL 07/13] tests: don't run benchmarks for the tsan build Alex Bennée
` (8 subsequent siblings)
14 siblings, 0 replies; 21+ messages in thread
From: Alex Bennée @ 2023-02-23 15:57 UTC (permalink / raw)
To: qemu-devel
Cc: peter.maydell, Alex Bennée, Thomas Huth,
Philippe Mathieu-Daudé, Wainer dos Santos Moschetta,
Beraldo Leal
The base job template is responsible for controlling how we kick off
testing on our various branches. Rename and extend the
custom_runner_template so we can take advantage of all that control.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230221094558.2864616-8-alex.bennee@linaro.org>
diff --git a/.gitlab-ci.d/custom-runners.yml b/.gitlab-ci.d/custom-runners.yml
index 9fdc476c48..34a1e6f327 100644
--- a/.gitlab-ci.d/custom-runners.yml
+++ b/.gitlab-ci.d/custom-runners.yml
@@ -15,7 +15,8 @@ variables:
# All custom runners can extend this template to upload the testlog
# data as an artifact and also feed the junit report
-.custom_artifacts_template:
+.custom_runner_template:
+ extends: .base_job_template
artifacts:
name: "$CI_JOB_NAME-$CI_COMMIT_REF_SLUG"
expire_in: 7 days
diff --git a/.gitlab-ci.d/custom-runners/ubuntu-20.04-s390x.yml b/.gitlab-ci.d/custom-runners/ubuntu-20.04-s390x.yml
index f512eaeaa3..cdae6c5212 100644
--- a/.gitlab-ci.d/custom-runners/ubuntu-20.04-s390x.yml
+++ b/.gitlab-ci.d/custom-runners/ubuntu-20.04-s390x.yml
@@ -3,7 +3,7 @@
# "Install basic packages to build QEMU on Ubuntu 20.04/20.04"
ubuntu-20.04-s390x-all-linux-static:
- extends: .custom_artifacts_template
+ extends: .custom_runner_template
needs: []
stage: build
tags:
@@ -24,7 +24,7 @@ ubuntu-20.04-s390x-all-linux-static:
- make --output-sync -j`nproc` check
ubuntu-20.04-s390x-all:
- extends: .custom_artifacts_template
+ extends: .custom_runner_template
needs: []
stage: build
tags:
@@ -43,7 +43,7 @@ ubuntu-20.04-s390x-all:
- make --output-sync -j`nproc` check
ubuntu-20.04-s390x-alldbg:
- extends: .custom_artifacts_template
+ extends: .custom_runner_template
needs: []
stage: build
tags:
@@ -66,7 +66,7 @@ ubuntu-20.04-s390x-alldbg:
- make --output-sync -j`nproc` check
ubuntu-20.04-s390x-clang:
- extends: .custom_artifacts_template
+ extends: .custom_runner_template
needs: []
stage: build
tags:
@@ -108,7 +108,7 @@ ubuntu-20.04-s390x-tci:
- make --output-sync -j`nproc`
ubuntu-20.04-s390x-notcg:
- extends: .custom_artifacts_template
+ extends: .custom_runner_template
needs: []
stage: build
tags:
diff --git a/.gitlab-ci.d/custom-runners/ubuntu-22.04-aarch32.yml b/.gitlab-ci.d/custom-runners/ubuntu-22.04-aarch32.yml
index 42137aaf2a..50e5646a44 100644
--- a/.gitlab-ci.d/custom-runners/ubuntu-22.04-aarch32.yml
+++ b/.gitlab-ci.d/custom-runners/ubuntu-22.04-aarch32.yml
@@ -3,7 +3,7 @@
# "Install basic packages to build QEMU on Ubuntu 20.04"
ubuntu-22.04-aarch32-all:
- extends: .custom_artifacts_template
+ extends: .custom_runner_template
needs: []
stage: build
tags:
diff --git a/.gitlab-ci.d/custom-runners/ubuntu-22.04-aarch64.yml b/.gitlab-ci.d/custom-runners/ubuntu-22.04-aarch64.yml
index 8ba85be440..13e14a0f87 100644
--- a/.gitlab-ci.d/custom-runners/ubuntu-22.04-aarch64.yml
+++ b/.gitlab-ci.d/custom-runners/ubuntu-22.04-aarch64.yml
@@ -3,7 +3,7 @@
# "Install basic packages to build QEMU on Ubuntu 20.04"
ubuntu-22.04-aarch64-all-linux-static:
- extends: .custom_artifacts_template
+ extends: .custom_runner_template
needs: []
stage: build
tags:
@@ -24,7 +24,7 @@ ubuntu-22.04-aarch64-all-linux-static:
- make --output-sync -j`nproc --ignore=40` check
ubuntu-22.04-aarch64-all:
- extends: .custom_artifacts_template
+ extends: .custom_runner_template
needs: []
stage: build
tags:
@@ -46,7 +46,7 @@ ubuntu-22.04-aarch64-all:
- make --output-sync -j`nproc --ignore=40` check
ubuntu-22.04-aarch64-alldbg:
- extends: .custom_artifacts_template
+ extends: .custom_runner_template
needs: []
stage: build
tags:
@@ -65,7 +65,7 @@ ubuntu-22.04-aarch64-alldbg:
- make --output-sync -j`nproc --ignore=40` check
ubuntu-22.04-aarch64-clang:
- extends: .custom_artifacts_template
+ extends: .custom_runner_template
needs: []
stage: build
tags:
@@ -107,7 +107,7 @@ ubuntu-22.04-aarch64-tci:
- make --output-sync -j`nproc --ignore=40`
ubuntu-22.04-aarch64-notcg:
- extends: .custom_artifacts_template
+ extends: .custom_runner_template
needs: []
stage: build
tags:
--
2.39.1
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PULL 07/13] tests: don't run benchmarks for the tsan build
2023-02-23 15:57 [PULL 00/13] testing updates (gitlab, cirrus, docker, avocado, windows) Alex Bennée
` (5 preceding siblings ...)
2023-02-23 15:57 ` [PULL 06/13] gitlab: extend custom runners with base_job_template Alex Bennée
@ 2023-02-23 15:57 ` Alex Bennée
2023-02-23 15:57 ` [PULL 08/13] testing: update ubuntu2004 to ubuntu2204 Alex Bennée
` (7 subsequent siblings)
14 siblings, 0 replies; 21+ messages in thread
From: Alex Bennée @ 2023-02-23 15:57 UTC (permalink / raw)
To: qemu-devel
Cc: peter.maydell, Alex Bennée, Thomas Huth,
Philippe Mathieu-Daudé, Wainer dos Santos Moschetta,
Beraldo Leal
All we are really doing here is checking that TSAN builds compile and are
therefor a tool available to developers. The benchmarks are not
representative of QEMU's actual threading behaviour and they burn
precious CI time. Indeed switching to check-unit reveals many
unaddressed issues which have been logged at:
https://gitlab.com/qemu-project/qemu/-/issues/1496
So for now disable the make check and make this a build only
test.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230221094558.2864616-9-alex.bennee@linaro.org>
diff --git a/.gitlab-ci.d/buildtest.yml b/.gitlab-ci.d/buildtest.yml
index 8f332fc36f..e9a67e0191 100644
--- a/.gitlab-ci.d/buildtest.yml
+++ b/.gitlab-ci.d/buildtest.yml
@@ -465,7 +465,6 @@ tsan-build:
CONFIGURE_ARGS: --enable-tsan --cc=clang-10 --cxx=clang++-10
--enable-trace-backends=ust --enable-fdt=system --disable-slirp
TARGETS: x86_64-softmmu ppc64-softmmu riscv64-softmmu x86_64-linux-user
- MAKE_CHECK_ARGS: bench V=1
# gcov is a GCC features
gcov:
--
2.39.1
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PULL 08/13] testing: update ubuntu2004 to ubuntu2204
2023-02-23 15:57 [PULL 00/13] testing updates (gitlab, cirrus, docker, avocado, windows) Alex Bennée
` (6 preceding siblings ...)
2023-02-23 15:57 ` [PULL 07/13] tests: don't run benchmarks for the tsan build Alex Bennée
@ 2023-02-23 15:57 ` Alex Bennée
2023-02-23 15:57 ` [PULL 09/13] tests: skip the nios2 replay_kernel test Alex Bennée
` (6 subsequent siblings)
14 siblings, 0 replies; 21+ messages in thread
From: Alex Bennée @ 2023-02-23 15:57 UTC (permalink / raw)
To: qemu-devel
Cc: peter.maydell, Alex Bennée, John Snow, Thomas Huth,
Philippe Mathieu-Daudé, Wainer dos Santos Moschetta,
Beraldo Leal
The 22.04 LTS release has been out for almost a year now so its time
to update all the remaining images to the current LTS. We can also
drop some hacks we need for older clang TSAN support.
We will keep the ubuntu2004 container around for those who wish to
test builds on the currently still supported baseline.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230221094558.2864616-10-alex.bennee@linaro.org>
diff --git a/docs/devel/testing.rst b/docs/devel/testing.rst
index e10c47b5a7..309a575abe 100644
--- a/docs/devel/testing.rst
+++ b/docs/devel/testing.rst
@@ -574,13 +574,13 @@ https://github.com/google/sanitizers/wiki/ThreadSanitizerCppManual
Thread Sanitizer in Docker
~~~~~~~~~~~~~~~~~~~~~~~~~~
-TSan is currently supported in the ubuntu2004 docker.
+TSan is currently supported in the ubuntu2204 docker.
The test-tsan test will build using TSan and then run make check.
.. code::
- make docker-test-tsan@ubuntu2004
+ make docker-test-tsan@ubuntu2204
TSan warnings under docker are placed in files located at build/tsan/.
diff --git a/.gitlab-ci.d/buildtest.yml b/.gitlab-ci.d/buildtest.yml
index e9a67e0191..1686558d80 100644
--- a/.gitlab-ci.d/buildtest.yml
+++ b/.gitlab-ci.d/buildtest.yml
@@ -38,9 +38,9 @@ avocado-system-alpine:
build-system-ubuntu:
extends: .native_build_job_template
needs:
- job: amd64-ubuntu2004-container
+ job: amd64-ubuntu2204-container
variables:
- IMAGE: ubuntu2004
+ IMAGE: ubuntu2204
CONFIGURE_ARGS: --enable-docs --enable-fdt=system --enable-capstone
TARGETS: aarch64-softmmu alpha-softmmu cris-softmmu hppa-softmmu
microblazeel-softmmu mips64el-softmmu
@@ -56,7 +56,7 @@ check-system-ubuntu:
- job: build-system-ubuntu
artifacts: true
variables:
- IMAGE: ubuntu2004
+ IMAGE: ubuntu2204
MAKE_CHECK_ARGS: check
avocado-system-ubuntu:
@@ -65,7 +65,7 @@ avocado-system-ubuntu:
- job: build-system-ubuntu
artifacts: true
variables:
- IMAGE: ubuntu2004
+ IMAGE: ubuntu2204
MAKE_CHECK_ARGS: check-avocado
build-system-debian:
@@ -459,10 +459,10 @@ avocado-cfi-x86_64:
tsan-build:
extends: .native_build_job_template
needs:
- job: amd64-ubuntu2004-container
+ job: amd64-ubuntu2204-container
variables:
- IMAGE: ubuntu2004
- CONFIGURE_ARGS: --enable-tsan --cc=clang-10 --cxx=clang++-10
+ IMAGE: ubuntu2204
+ CONFIGURE_ARGS: --enable-tsan --cc=clang --cxx=clang++
--enable-trace-backends=ust --enable-fdt=system --disable-slirp
TARGETS: x86_64-softmmu ppc64-softmmu riscv64-softmmu x86_64-linux-user
@@ -470,10 +470,10 @@ tsan-build:
gcov:
extends: .native_build_job_template
needs:
- job: amd64-ubuntu2004-container
+ job: amd64-ubuntu2204-container
timeout: 80m
variables:
- IMAGE: ubuntu2004
+ IMAGE: ubuntu2204
CONFIGURE_ARGS: --enable-gcov
TARGETS: aarch64-softmmu ppc64-softmmu s390x-softmmu x86_64-softmmu
MAKE_CHECK_ARGS: check
@@ -538,9 +538,9 @@ build-tci:
build-coroutine-sigaltstack:
extends: .native_build_job_template
needs:
- job: amd64-ubuntu2004-container
+ job: amd64-ubuntu2204-container
variables:
- IMAGE: ubuntu2004
+ IMAGE: ubuntu2204
CONFIGURE_ARGS: --with-coroutine=sigaltstack --disable-tcg
--enable-trace-backends=ftrace
MAKE_CHECK_ARGS: check-unit
diff --git a/.gitlab-ci.d/containers.yml b/.gitlab-ci.d/containers.yml
index 96d2a3b58b..8637a13d86 100644
--- a/.gitlab-ci.d/containers.yml
+++ b/.gitlab-ci.d/containers.yml
@@ -13,10 +13,10 @@ amd64-debian-container:
variables:
NAME: debian-amd64
-amd64-ubuntu2004-container:
+amd64-ubuntu2204-container:
extends: .container_job_template
variables:
- NAME: ubuntu2004
+ NAME: ubuntu2204
amd64-opensuse-leap-container:
extends: .container_job_template
diff --git a/tests/docker/dockerfiles/ubuntu2004.docker b/tests/docker/dockerfiles/ubuntu2004.docker
index f34d88d33d..75233064de 100644
--- a/tests/docker/dockerfiles/ubuntu2004.docker
+++ b/tests/docker/dockerfiles/ubuntu2004.docker
@@ -146,6 +146,3 @@ ENV LANG "en_US.UTF-8"
ENV MAKE "/usr/bin/make"
ENV NINJA "/usr/bin/ninja"
ENV PYTHON "/usr/bin/python3"
-# Apply patch https://reviews.llvm.org/D75820
-# This is required for TSan in clang-10 to compile with QEMU.
-RUN sed -i 's/^const/static const/g' /usr/lib/llvm-10/lib/clang/10.0.0/include/sanitizer/tsan_interface.h
diff --git a/tests/docker/dockerfiles/ubuntu2204.docker b/tests/docker/dockerfiles/ubuntu2204.docker
new file mode 100644
index 0000000000..30b9e56793
--- /dev/null
+++ b/tests/docker/dockerfiles/ubuntu2204.docker
@@ -0,0 +1,147 @@
+# THIS FILE WAS AUTO-GENERATED
+#
+# $ lcitool dockerfile --layers all ubuntu-2204 qemu
+#
+# https://gitlab.com/libvirt/libvirt-ci
+
+FROM docker.io/library/ubuntu:22.04
+
+RUN export DEBIAN_FRONTEND=noninteractive && \
+ apt-get update && \
+ apt-get install -y eatmydata && \
+ eatmydata apt-get dist-upgrade -y && \
+ eatmydata apt-get install --no-install-recommends -y \
+ bash \
+ bc \
+ bison \
+ bsdextrautils \
+ bzip2 \
+ ca-certificates \
+ ccache \
+ clang \
+ dbus \
+ debianutils \
+ diffutils \
+ exuberant-ctags \
+ findutils \
+ flex \
+ g++ \
+ gcc \
+ gcovr \
+ genisoimage \
+ gettext \
+ git \
+ hostname \
+ libaio-dev \
+ libasan5 \
+ libasound2-dev \
+ libattr1-dev \
+ libbpf-dev \
+ libbrlapi-dev \
+ libbz2-dev \
+ libc6-dev \
+ libcacard-dev \
+ libcap-ng-dev \
+ libcapstone-dev \
+ libcmocka-dev \
+ libcurl4-gnutls-dev \
+ libdaxctl-dev \
+ libdrm-dev \
+ libepoxy-dev \
+ libfdt-dev \
+ libffi-dev \
+ libfuse3-dev \
+ libgbm-dev \
+ libgcrypt20-dev \
+ libglib2.0-dev \
+ libglusterfs-dev \
+ libgnutls28-dev \
+ libgtk-3-dev \
+ libibumad-dev \
+ libibverbs-dev \
+ libiscsi-dev \
+ libjemalloc-dev \
+ libjpeg-turbo8-dev \
+ libjson-c-dev \
+ liblttng-ust-dev \
+ liblzo2-dev \
+ libncursesw5-dev \
+ libnfs-dev \
+ libnuma-dev \
+ libpam0g-dev \
+ libpcre2-dev \
+ libpixman-1-dev \
+ libpmem-dev \
+ libpng-dev \
+ libpulse-dev \
+ librbd-dev \
+ librdmacm-dev \
+ libsasl2-dev \
+ libsdl2-dev \
+ libsdl2-image-dev \
+ libseccomp-dev \
+ libselinux1-dev \
+ libslirp-dev \
+ libsnappy-dev \
+ libsndio-dev \
+ libspice-protocol-dev \
+ libspice-server-dev \
+ libssh-dev \
+ libsystemd-dev \
+ libtasn1-6-dev \
+ libubsan1 \
+ libudev-dev \
+ liburing-dev \
+ libusb-1.0-0-dev \
+ libusbredirhost-dev \
+ libvdeplug-dev \
+ libvirglrenderer-dev \
+ libvte-2.91-dev \
+ libxen-dev \
+ libzstd-dev \
+ llvm \
+ locales \
+ make \
+ meson \
+ multipath-tools \
+ ncat \
+ nettle-dev \
+ ninja-build \
+ openssh-client \
+ pkgconf \
+ python3 \
+ python3-numpy \
+ python3-opencv \
+ python3-pillow \
+ python3-pip \
+ python3-sphinx \
+ python3-sphinx-rtd-theme \
+ python3-venv \
+ python3-yaml \
+ rpm2cpio \
+ sed \
+ socat \
+ sparse \
+ systemtap-sdt-dev \
+ tar \
+ tesseract-ocr \
+ tesseract-ocr-eng \
+ xfslibs-dev \
+ zlib1g-dev && \
+ eatmydata apt-get autoremove -y && \
+ eatmydata apt-get autoclean -y && \
+ sed -Ei 's,^# (en_US\.UTF-8 .*)$,\1,' /etc/locale.gen && \
+ dpkg-reconfigure locales && \
+ dpkg-query --showformat '${Package}_${Version}_${Architecture}\n' --show > /packages.txt && \
+ mkdir -p /usr/libexec/ccache-wrappers && \
+ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/c++ && \
+ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/cc && \
+ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/clang && \
+ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/g++ && \
+ ln -s /usr/bin/ccache /usr/libexec/ccache-wrappers/gcc
+
+ENV CCACHE_WRAPPERSDIR "/usr/libexec/ccache-wrappers"
+ENV LANG "en_US.UTF-8"
+ENV MAKE "/usr/bin/make"
+ENV NINJA "/usr/bin/ninja"
+ENV PYTHON "/usr/bin/python3"
diff --git a/tests/docker/test-tsan b/tests/docker/test-tsan
index 53d90d2f79..f6d6590e39 100755
--- a/tests/docker/test-tsan
+++ b/tests/docker/test-tsan
@@ -21,7 +21,7 @@ setup_tsan()
tsan_log_dir="/tmp/qemu-test/build/tsan"
mkdir -p $tsan_log_dir > /dev/null || true
EXTRA_CONFIGURE_OPTS="${EXTRA_CONFIGURE_OPTS} --enable-tsan \
- --cc=clang-10 --cxx=clang++-10 \
+ --cc=clang --cxx=clang++ \
--disable-werror --extra-cflags=-O0"
# detect deadlocks is false currently simply because
# TSan crashes immediately with deadlock detector enabled.
diff --git a/tests/lcitool/refresh b/tests/lcitool/refresh
index a5ea0efc3b..cc9e34ac87 100755
--- a/tests/lcitool/refresh
+++ b/tests/lcitool/refresh
@@ -69,13 +69,6 @@ def generate_cirrus(target, trailer=None):
generate(filename, cmd, trailer)
-ubuntu2004_tsanhack = [
- "# Apply patch https://reviews.llvm.org/D75820\n",
- "# This is required for TSan in clang-10 to compile with QEMU.\n",
- "RUN sed -i 's/^const/static const/g' /usr/lib/llvm-10/lib/clang/10.0.0/include/sanitizer/tsan_interface.h\n"
-]
-
-
# Netmap still needs to be manually built as it is yet to be packaged
# into a distro. We also add cscope and gtags which are used in the CI
# test
@@ -113,8 +106,8 @@ try:
trailer="".join(debian11_extras))
generate_dockerfile("fedora", "fedora-37")
generate_dockerfile("opensuse-leap", "opensuse-leap-153")
- generate_dockerfile("ubuntu2004", "ubuntu-2004",
- trailer="".join(ubuntu2004_tsanhack))
+ generate_dockerfile("ubuntu2004", "ubuntu-2004")
+ generate_dockerfile("ubuntu2204", "ubuntu-2204")
#
# Cross compiling builds
--
2.39.1
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PULL 09/13] tests: skip the nios2 replay_kernel test
2023-02-23 15:57 [PULL 00/13] testing updates (gitlab, cirrus, docker, avocado, windows) Alex Bennée
` (7 preceding siblings ...)
2023-02-23 15:57 ` [PULL 08/13] testing: update ubuntu2004 to ubuntu2204 Alex Bennée
@ 2023-02-23 15:57 ` Alex Bennée
2023-02-23 15:57 ` [PULL 10/13] tests: add tuxrun baseline test to avocado Alex Bennée
` (5 subsequent siblings)
14 siblings, 0 replies; 21+ messages in thread
From: Alex Bennée @ 2023-02-23 15:57 UTC (permalink / raw)
To: qemu-devel
Cc: peter.maydell, Alex Bennée, Philippe Mathieu-Daudé,
Pavel Dovgalyuk, Paolo Bonzini, Cleber Rosa,
Wainer dos Santos Moschetta, Beraldo Leal
It is buggy and keeps failing.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230221094558.2864616-11-alex.bennee@linaro.org>
diff --git a/tests/avocado/replay_kernel.py b/tests/avocado/replay_kernel.py
index 00a26e4a0c..f13456e1ec 100644
--- a/tests/avocado/replay_kernel.py
+++ b/tests/avocado/replay_kernel.py
@@ -349,6 +349,7 @@ def test_or1k_sim(self):
file_path = self.fetch_asset(tar_url, asset_hash=tar_hash)
self.do_test_advcal_2018(file_path, 'vmlinux')
+ @skip("nios2 emulation is buggy under record/replay")
def test_nios2_10m50(self):
"""
:avocado: tags=arch:nios2
--
2.39.1
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PULL 10/13] tests: add tuxrun baseline test to avocado
2023-02-23 15:57 [PULL 00/13] testing updates (gitlab, cirrus, docker, avocado, windows) Alex Bennée
` (8 preceding siblings ...)
2023-02-23 15:57 ` [PULL 09/13] tests: skip the nios2 replay_kernel test Alex Bennée
@ 2023-02-23 15:57 ` Alex Bennée
2023-02-23 15:57 ` [PULL 11/13] tests/docker: Use binaries for debian-tricore-cross Alex Bennée
` (4 subsequent siblings)
14 siblings, 0 replies; 21+ messages in thread
From: Alex Bennée @ 2023-02-23 15:57 UTC (permalink / raw)
To: qemu-devel
Cc: peter.maydell, Alex Bennée, Anders Roxell, Thomas Huth,
Philippe Mathieu-Daudé, Wainer dos Santos Moschetta,
Beraldo Leal, Cleber Rosa
The TuxRun project (www.tuxrun.org) uses QEMU to run tests on a wide
variety of kernel configurations on wide range of our emulated
platforms. They publish a known good set of images at:
https://storage.tuxboot.com/
to help with bisecting regressions in either the kernel, firmware or
QEMU itself. The tests are pretty lightweight as they contain just a
kernel with a minimal rootfs which boots a lot faster than most of the
distros. In time they might be persuaded to version their known good
baselines and we can then enable proper checksums.
For a couple of tests we currently skip:
- mips64, a regression against previous stable release
- sh4, very unstable with intermittent oops
Total run time: 340s (default) -> 890s (debug)
Overall coverage rate (tested targets + disabled tests):
lines......: 16.1% (126894 of 789848 lines)
functions..: 20.6% (15954 of 77489 functions)
branches...: 9.3% (40727 of 439365 branches)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230221094558.2864616-12-alex.bennee@linaro.org>
diff --git a/MAINTAINERS b/MAINTAINERS
index 9adb628627..71bdbbd04c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3757,6 +3757,7 @@ F: scripts/ci/
F: tests/docker/
F: tests/vm/
F: tests/lcitool/
+F: tests/avocado/tuxrun_baselines.py
F: scripts/archive-source.sh
F: docs/devel/testing.rst
W: https://gitlab.com/qemu-project/qemu/pipelines
diff --git a/tests/avocado/tuxrun_baselines.py b/tests/avocado/tuxrun_baselines.py
new file mode 100644
index 0000000000..30aaefc1d3
--- /dev/null
+++ b/tests/avocado/tuxrun_baselines.py
@@ -0,0 +1,423 @@
+# Functional test that boots known good tuxboot images the same way
+# that tuxrun (www.tuxrun.org) does. This tool is used by things like
+# the LKFT project to run regression tests on kernels.
+#
+# Copyright (c) 2023 Linaro Ltd.
+#
+# Author:
+# Alex Bennée <alex.bennee@linaro.org>
+#
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+import os
+import time
+
+from avocado import skip, skipIf
+from avocado_qemu import QemuSystemTest
+from avocado_qemu import exec_command, exec_command_and_wait_for_pattern
+from avocado_qemu import wait_for_console_pattern
+from avocado.utils import process
+from avocado.utils.path import find_command
+
+class TuxRunBaselineTest(QemuSystemTest):
+ """
+ :avocado: tags=accel:tcg
+ """
+
+ KERNEL_COMMON_COMMAND_LINE = 'printk.time=0'
+ # Tests are ~10-40s, allow for --debug/--enable-gcov overhead
+ timeout = 100
+
+ def get_tag(self, tagname, default=None):
+ """
+ Get the metadata tag or return the default.
+ """
+ utag = self._get_unique_tag_val(tagname)
+ print(f"{tagname}/{default} -> {utag}")
+ if utag:
+ return utag
+
+ return default
+
+ def setUp(self):
+ super().setUp()
+
+ # We need zstd for all the tuxrun tests
+ # See https://github.com/avocado-framework/avocado/issues/5609
+ zstd = find_command('zstd', False)
+ if zstd is False:
+ self.cancel('Could not find "zstd", which is required to '
+ 'decompress rootfs')
+ self.zstd = zstd
+
+ # Process the TuxRun specific tags, most machines work with
+ # reasonable defaults but we sometimes need to tweak the
+ # config. To avoid open coding everything we store all these
+ # details in the metadata for each test.
+
+ # The tuxboot tag matches the root directory
+ self.tuxboot = self.get_tag('tuxboot')
+
+ # Most Linux's use ttyS0 for their serial port
+ self.console = self.get_tag('console', "ttyS0")
+
+ # Does the machine shutdown QEMU nicely on "halt"
+ self.shutdown = self.get_tag('shutdown')
+
+ # The name of the kernel Image file
+ self.image = self.get_tag('image', "Image")
+
+ # The block device drive type
+ self.drive = self.get_tag('drive', "virtio-blk-device")
+
+ self.root = self.get_tag('root', "vda")
+
+ # Occasionally we need extra devices to hook things up
+ self.extradev = self.get_tag('extradev')
+
+ def wait_for_console_pattern(self, success_message, vm=None):
+ wait_for_console_pattern(self, success_message,
+ failure_message='Kernel panic - not syncing',
+ vm=vm)
+
+ def fetch_tuxrun_assets(self, dt=None):
+ """
+ Fetch the TuxBoot assets. They are stored in a standard way so we
+ use the per-test tags to fetch details.
+ """
+ base_url = f"https://storage.tuxboot.com/{self.tuxboot}/"
+ kernel_image = self.fetch_asset(base_url + self.image)
+ disk_image_zst = self.fetch_asset(base_url + "rootfs.ext4.zst")
+
+ cmd = f"{self.zstd} -d {disk_image_zst} -o {self.workdir}/rootfs.ext4"
+ process.run(cmd)
+
+ if dt:
+ dtb = self.fetch_asset(base_url + dt)
+ else:
+ dtb = None
+
+ return (kernel_image, self.workdir + "/rootfs.ext4", dtb)
+
+ def prepare_run(self, kernel, disk, dtb=None, console_index=0):
+ """
+ Setup to run and add the common parameters to the system
+ """
+ self.vm.set_console(console_index=console_index)
+
+ # all block devices are raw ext4's
+ blockdev = "driver=raw,file.driver=file," \
+ + f"file.filename={disk},node-name=hd0"
+
+ kcmd_line = self.KERNEL_COMMON_COMMAND_LINE
+ kcmd_line += f" root=/dev/{self.root}"
+ kcmd_line += f" console={self.console}"
+
+ self.vm.add_args('-kernel', kernel,
+ '-append', kcmd_line,
+ '-blockdev', blockdev)
+
+ # Sometimes we need extra devices attached
+ if self.extradev:
+ self.vm.add_args('-device', self.extradev)
+
+ # Some machines already define a drive device
+ if self.drive != "none":
+ self.vm.add_args('-device',
+ f"{self.drive},drive=hd0")
+
+ # Some machines need an explicit DTB
+ if dtb:
+ self.vm.add_args('-dtb', dtb)
+
+ def run_tuxtest_tests(self, haltmsg):
+ """
+ Wait for the system to boot up, wait for the login prompt and
+ then do a few things on the console. Trigger a shutdown and
+ wait to exit cleanly.
+ """
+ self.wait_for_console_pattern("Welcome to TuxTest")
+ time.sleep(0.2)
+ exec_command(self, 'root')
+ time.sleep(0.2)
+ exec_command(self, 'cat /proc/interrupts')
+ time.sleep(0.1)
+ exec_command(self, 'cat /proc/self/maps')
+ time.sleep(0.1)
+ exec_command(self, 'uname -a')
+ time.sleep(0.1)
+ exec_command_and_wait_for_pattern(self, 'halt', haltmsg)
+
+ # Wait for VM to shut down gracefully if it can
+ if self.shutdown == "nowait":
+ self.vm.shutdown()
+ else:
+ self.vm.wait()
+
+ def common_tuxrun(self, dt=None, haltmsg="reboot: System halted",
+ console_index=0):
+ """
+ Common path for LKFT tests. Unless we need to do something
+ special with the command line we can process most things using
+ the tag metadata.
+ """
+ (kernel, disk, dtb) = self.fetch_tuxrun_assets(dt)
+
+ self.prepare_run(kernel, disk, dtb, console_index)
+ self.vm.launch()
+ self.run_tuxtest_tests(haltmsg)
+
+ #
+ # The tests themselves. The configuration is derived from how
+ # tuxrun invokes qemu (with minor tweaks like using -blockdev
+ # consistently). The tuxrun equivalent is something like:
+ #
+ # tuxrun --device qemu-{ARCH} \
+ # --kernel https://storage.tuxboot.com/{TUXBOOT}/{IMAGE}
+ #
+
+ def test_arm64(self):
+ """
+ :avocado: tags=arch:aarch64
+ :avocado: tags=cpu:cortex-a57
+ :avocado: tags=machine:virt
+ :avocado: tags=tuxboot:arm64
+ :avocado: tags=console:ttyAMA0
+ :avocado: tags=shutdown:nowait
+ """
+ self.common_tuxrun()
+
+ def test_arm64be(self):
+ """
+ :avocado: tags=arch:aarch64
+ :avocado: tags=cpu:cortex-a57
+ :avocado: tags=endian:big
+ :avocado: tags=machine:virt
+ :avocado: tags=tuxboot:arm64be
+ :avocado: tags=console:ttyAMA0
+ :avocado: tags=shutdown:nowait
+ """
+ self.common_tuxrun()
+
+ def test_armv5(self):
+ """
+ :avocado: tags=arch:arm
+ :avocado: tags=cpu:arm926
+ :avocado: tags=machine:versatilepb
+ :avocado: tags=tuxboot:armv5
+ :avocado: tags=image:zImage
+ :avocado: tags=drive:virtio-blk-pci
+ :avocado: tags=console:ttyAMA0
+ :avocado: tags=shutdown:nowait
+ """
+ self.common_tuxrun(dt="versatile-pb.dtb")
+
+ def test_armv7(self):
+ """
+ :avocado: tags=arch:arm
+ :avocado: tags=cpu:cortex-a15
+ :avocado: tags=machine:virt
+ :avocado: tags=tuxboot:armv7
+ :avocado: tags=image:zImage
+ :avocado: tags=console:ttyAMA0
+ :avocado: tags=shutdown:nowait
+ """
+ self.common_tuxrun()
+
+ def test_armv7be(self):
+ """
+ :avocado: tags=arch:arm
+ :avocado: tags=cpu:cortex-a15
+ :avocado: tags=endian:big
+ :avocado: tags=machine:virt
+ :avocado: tags=tuxboot:armv7be
+ :avocado: tags=image:zImage
+ :avocado: tags=console:ttyAMA0
+ :avocado: tags=shutdown:nowait
+ """
+ self.common_tuxrun()
+
+ def test_i386(self):
+ """
+ :avocado: tags=arch:i386
+ :avocado: tags=cpu:coreduo
+ :avocado: tags=machine:q35
+ :avocado: tags=tuxboot:i386
+ :avocado: tags=image:bzImage
+ :avocado: tags=drive:virtio-blk-pci
+ :avocado: tags=shutdown:nowait
+ """
+ self.common_tuxrun()
+
+ def test_mips32(self):
+ """
+ :avocado: tags=arch:mips
+ :avocado: tags=machine:malta
+ :avocado: tags=cpu:mips32r6-generic
+ :avocado: tags=endian:big
+ :avocado: tags=tuxboot:mips32
+ :avocado: tags=image:vmlinux
+ :avocado: tags=drive:driver=ide-hd,bus=ide.0,unit=0
+ :avocado: tags=root:sda
+ :avocado: tags=shutdown:nowait
+ """
+ self.common_tuxrun()
+
+ def test_mips32el(self):
+ """
+ :avocado: tags=arch:mipsel
+ :avocado: tags=machine:malta
+ :avocado: tags=cpu:mips32r6-generic
+ :avocado: tags=tuxboot:mips32el
+ :avocado: tags=image:vmlinux
+ :avocado: tags=drive:driver=ide-hd,bus=ide.0,unit=0
+ :avocado: tags=root:sda
+ :avocado: tags=shutdown:nowait
+ """
+ self.common_tuxrun()
+
+ @skip("QEMU currently broken") # regression against stable QEMU
+ def test_mips64(self):
+ """
+ :avocado: tags=arch:mips64
+ :avocado: tags=machine:malta
+ :avocado: tags=tuxboot:mips64
+ :avocado: tags=endian:big
+ :avocado: tags=image:vmlinux
+ :avocado: tags=drive:driver=ide-hd,bus=ide.0,unit=0
+ :avocado: tags=root:sda
+ :avocado: tags=shutdown:nowait
+ """
+ self.common_tuxrun()
+
+ def test_mips64el(self):
+ """
+ :avocado: tags=arch:mips64el
+ :avocado: tags=machine:malta
+ :avocado: tags=tuxboot:mips64el
+ :avocado: tags=image:vmlinux
+ :avocado: tags=drive:driver=ide-hd,bus=ide.0,unit=0
+ :avocado: tags=root:sda
+ :avocado: tags=shutdown:nowait
+ """
+ self.common_tuxrun()
+
+ def test_ppc32(self):
+ """
+ :avocado: tags=arch:ppc
+ :avocado: tags=machine:ppce500
+ :avocado: tags=cpu:e500mc
+ :avocado: tags=tuxboot:ppc32
+ :avocado: tags=image:uImage
+ :avocado: tags=drive:virtio-blk-pci
+ :avocado: tags=shutdown:nowait
+ """
+ self.common_tuxrun()
+
+ def test_ppc64(self):
+ """
+ :avocado: tags=arch:ppc64
+ :avocado: tags=machine:pseries
+ :avocado: tags=cpu:POWER8
+ :avocado: tags=endian:big
+ :avocado: tags=console:hvc0
+ :avocado: tags=tuxboot:ppc64
+ :avocado: tags=image:vmlinux
+ :avocado: tags=extradev:driver=spapr-vscsi
+ :avocado: tags=drive:scsi-hd
+ :avocado: tags=root:sda
+ """
+ self.common_tuxrun()
+
+ def test_ppc64le(self):
+ """
+ :avocado: tags=arch:ppc64
+ :avocado: tags=machine:pseries
+ :avocado: tags=cpu:POWER8
+ :avocado: tags=console:hvc0
+ :avocado: tags=tuxboot:ppc64le
+ :avocado: tags=image:vmlinux
+ :avocado: tags=extradev:driver=spapr-vscsi
+ :avocado: tags=drive:scsi-hd
+ :avocado: tags=root:sda
+ """
+ self.common_tuxrun()
+
+ def test_riscv32(self):
+ """
+ :avocado: tags=arch:riscv32
+ :avocado: tags=machine:virt
+ :avocado: tags=tuxboot:riscv32
+ """
+ self.common_tuxrun()
+
+ def test_riscv64(self):
+ """
+ :avocado: tags=arch:riscv64
+ :avocado: tags=machine:virt
+ :avocado: tags=tuxboot:riscv64
+ """
+ self.common_tuxrun()
+
+ def test_s390(self):
+ """
+ :avocado: tags=arch:s390x
+ :avocado: tags=endian:big
+ :avocado: tags=tuxboot:s390
+ :avocado: tags=image:bzImage
+ :avocado: tags=drive:virtio-blk-ccw
+ :avocado: tags=shutdown:nowait
+ """
+ self.common_tuxrun(haltmsg="Requesting system halt")
+
+ # Note: some segfaults caused by unaligned userspace access
+ @skipIf(os.getenv('GITLAB_CI'), 'Skipping unstable test on GitLab')
+ def test_sh4(self):
+ """
+ :avocado: tags=arch:sh4
+ :avocado: tags=machine:r2d
+ :avocado: tags=cpu:sh7785
+ :avocado: tags=tuxboot:sh4
+ :avocado: tags=image:zImage
+ :avocado: tags=root:sda
+ :avocado: tags=drive:driver=ide-hd,bus=ide.0,unit=0
+ :avocado: tags=console:ttySC1
+ """
+ # The test is currently too unstable to do much in userspace
+ # so we skip common_tuxrun and do a minimal boot and shutdown.
+ (kernel, disk, dtb) = self.fetch_tuxrun_assets()
+
+ # the console comes on the second serial port
+ self.prepare_run(kernel, disk, console_index=1)
+ self.vm.launch()
+
+ self.wait_for_console_pattern("Welcome to TuxTest")
+ time.sleep(0.1)
+ exec_command(self, 'root')
+ time.sleep(0.1)
+ exec_command_and_wait_for_pattern(self, 'halt',
+ "reboot: System halted")
+
+ def test_sparc64(self):
+ """
+ :avocado: tags=arch:sparc64
+ :avocado: tags=tuxboot:sparc64
+ :avocado: tags=image:vmlinux
+ :avocado: tags=root:sda
+ :avocado: tags=drive:driver=ide-hd,bus=ide.0,unit=0
+ :avocado: tags=shutdown:nowait
+ """
+ self.common_tuxrun()
+
+ def test_x86_64(self):
+ """
+ :avocado: tags=arch:x86_64
+ :avocado: tags=machine:q35
+ :avocado: tags=cpu:Nehalem
+ :avocado: tags=tuxboot:x86_64
+ :avocado: tags=image:bzImage
+ :avocado: tags=root:sda
+ :avocado: tags=drive:driver=ide-hd,bus=ide.0,unit=0
+ :avocado: tags=shutdown:nowait
+ """
+ self.common_tuxrun()
--
2.39.1
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PULL 11/13] tests/docker: Use binaries for debian-tricore-cross
2023-02-23 15:57 [PULL 00/13] testing updates (gitlab, cirrus, docker, avocado, windows) Alex Bennée
` (9 preceding siblings ...)
2023-02-23 15:57 ` [PULL 10/13] tests: add tuxrun baseline test to avocado Alex Bennée
@ 2023-02-23 15:57 ` Alex Bennée
2023-02-23 15:57 ` [PULL 12/13] tests: ensure we export job results for some cross builds Alex Bennée
` (3 subsequent siblings)
14 siblings, 0 replies; 21+ messages in thread
From: Alex Bennée @ 2023-02-23 15:57 UTC (permalink / raw)
To: qemu-devel
Cc: peter.maydell, Bastian Koppelmann, Alex Bennée,
Philippe Mathieu-Daudé, Thomas Huth,
Wainer dos Santos Moschetta, Beraldo Leal
From: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
since binutils is pretty old, it fails our CI repeatedly during the
compilation of tricore-binutils. We created a precompiled version using
the debian docker image and download it instead of building it ourself.
We also updated the package to include a newer version of binutils, gcc,
and newlib. The default TriCore ISA version used by tricore-as changed
from the old version, so we have to specify it now. If we don't
'test_fadd' fails with 'unknown opcode'.
The new assembler also picks a new encoding in ld.h which fails the
'test_ld_h' test. We fix that by using the newest TriCore CPU for QEMU.
The old assembler accepted an extra ')' in 'test_imask'. The new one
does not, so lets remove it.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230209145812.46730-1-kbastian@mail.uni-paderborn.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230221094558.2864616-13-alex.bennee@linaro.org>
diff --git a/tests/tcg/tricore/macros.h b/tests/tcg/tricore/macros.h
index ec4f5bff52..3df2e0de82 100644
--- a/tests/tcg/tricore/macros.h
+++ b/tests/tcg/tricore/macros.h
@@ -174,7 +174,7 @@ test_ ## num: \
TEST_CASE_E(num, res_lo, res_hi, \
LI(DREG_RS1, rs1); \
rstv; \
- insn EREG_CALC_RESULT, imm1, DREG_RS1, imm2); \
+ insn EREG_CALC_RESULT, imm1, DREG_RS1, imm2; \
)
diff --git a/tests/docker/dockerfiles/debian-tricore-cross.docker b/tests/docker/dockerfiles/debian-tricore-cross.docker
index 5ae58efa09..82e4576485 100644
--- a/tests/docker/dockerfiles/debian-tricore-cross.docker
+++ b/tests/docker/dockerfiles/debian-tricore-cross.docker
@@ -20,6 +20,7 @@ RUN apt update && \
bzip2 \
ca-certificates \
ccache \
+ curl \
flex \
g++ \
gcc \
@@ -34,13 +35,8 @@ RUN apt update && \
python3-setuptools \
python3-wheel
-RUN git clone --single-branch \
- https://github.com/bkoppelmann/tricore-binutils.git \
- /usr/src/binutils && \
- cd /usr/src/binutils && chmod +x missing && \
- CFLAGS=-w ./configure --prefix=/usr/local --disable-nls --target=tricore && \
- make && make install && \
- rm -rf /usr/src/binutils
+RUN curl -#SL https://github.com/bkoppelmann/package_940/releases/download/tricore-toolchain-9.40/tricore-toolchain-9.4.0.tar.gz \
+ | tar -xzC /usr/local/
# This image can only build a very minimal QEMU as well as the tests
ENV DEF_TARGET_LIST tricore-softmmu
diff --git a/tests/tcg/tricore/Makefile.softmmu-target b/tests/tcg/tricore/Makefile.softmmu-target
index d2446af8b4..b3cd56fffc 100644
--- a/tests/tcg/tricore/Makefile.softmmu-target
+++ b/tests/tcg/tricore/Makefile.softmmu-target
@@ -1,7 +1,7 @@
TESTS_PATH = $(SRC_PATH)/tests/tcg/tricore
-LDFLAGS = -T$(TESTS_PATH)/link.ld
-ASFLAGS =
+LDFLAGS = -T$(TESTS_PATH)/link.ld --mcpu=tc162
+ASFLAGS = -mtc162
TESTS += test_abs.tst
TESTS += test_bmerge.tst
@@ -19,7 +19,7 @@ TESTS += test_madd.tst
TESTS += test_msub.tst
TESTS += test_muls.tst
-QEMU_OPTS += -M tricore_testboard -nographic -kernel
+QEMU_OPTS += -M tricore_testboard -cpu tc27x -nographic -kernel
%.pS: $(TESTS_PATH)/%.S
$(HOST_CC) -E -o $@ $<
--
2.39.1
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PULL 12/13] tests: ensure we export job results for some cross builds
2023-02-23 15:57 [PULL 00/13] testing updates (gitlab, cirrus, docker, avocado, windows) Alex Bennée
` (10 preceding siblings ...)
2023-02-23 15:57 ` [PULL 11/13] tests/docker: Use binaries for debian-tricore-cross Alex Bennée
@ 2023-02-23 15:57 ` Alex Bennée
2023-02-23 15:57 ` [PULL 13/13] cirrus.yml: Improve the windows_msys2_task Alex Bennée
` (2 subsequent siblings)
14 siblings, 0 replies; 21+ messages in thread
From: Alex Bennée @ 2023-02-23 15:57 UTC (permalink / raw)
To: qemu-devel
Cc: peter.maydell, Alex Bennée, Thomas Huth,
Philippe Mathieu-Daudé, Wainer dos Santos Moschetta,
Beraldo Leal
We do run tests on some cross builds. Provide a template to ensure we
export the testlog to the build artefacts and report the test results
via the junit.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230221094558.2864616-14-alex.bennee@linaro.org>
diff --git a/.gitlab-ci.d/crossbuild-template.yml b/.gitlab-ci.d/crossbuild-template.yml
index 6d709628f1..24a41a7b21 100644
--- a/.gitlab-ci.d/crossbuild-template.yml
+++ b/.gitlab-ci.d/crossbuild-template.yml
@@ -48,3 +48,14 @@
nios2-linux-user or1k-linux-user ppc-linux-user sparc-linux-user
xtensa-linux-user $CROSS_SKIP_TARGETS"
- make -j$(expr $(nproc) + 1) all check-build $MAKE_CHECK_ARGS
+
+# We can still run some tests on some of our cross build jobs. They can add this
+# template to their extends to save the build logs and test results
+.cross_test_artifacts:
+ artifacts:
+ name: "$CI_JOB_NAME-$CI_COMMIT_REF_SLUG"
+ expire_in: 7 days
+ paths:
+ - build/meson-logs/testlog.txt
+ reports:
+ junit: build/meson-logs/testlog.junit.xml
diff --git a/.gitlab-ci.d/crossbuilds.yml b/.gitlab-ci.d/crossbuilds.yml
index 74d6259b90..bbc013725c 100644
--- a/.gitlab-ci.d/crossbuilds.yml
+++ b/.gitlab-ci.d/crossbuilds.yml
@@ -44,7 +44,9 @@ cross-arm64-user:
IMAGE: debian-arm64-cross
cross-i386-system:
- extends: .cross_system_build_job
+ extends:
+ - .cross_system_build_job
+ - .cross_test_artifacts
needs:
job: i386-fedora-cross-container
variables:
@@ -52,7 +54,9 @@ cross-i386-system:
MAKE_CHECK_ARGS: check-qtest
cross-i386-user:
- extends: .cross_user_build_job
+ extends:
+ - .cross_user_build_job
+ - .cross_test_artifacts
needs:
job: i386-fedora-cross-container
variables:
@@ -60,7 +64,9 @@ cross-i386-user:
MAKE_CHECK_ARGS: check
cross-i386-tci:
- extends: .cross_accel_build_job
+ extends:
+ - .cross_accel_build_job
+ - .cross_test_artifacts
timeout: 60m
needs:
job: i386-fedora-cross-container
--
2.39.1
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PULL 13/13] cirrus.yml: Improve the windows_msys2_task
2023-02-23 15:57 [PULL 00/13] testing updates (gitlab, cirrus, docker, avocado, windows) Alex Bennée
` (11 preceding siblings ...)
2023-02-23 15:57 ` [PULL 12/13] tests: ensure we export job results for some cross builds Alex Bennée
@ 2023-02-23 15:57 ` Alex Bennée
2023-02-24 18:55 ` [PULL 00/13] testing updates (gitlab, cirrus, docker, avocado, windows) Peter Maydell
2023-02-27 11:58 ` Peter Maydell
14 siblings, 0 replies; 21+ messages in thread
From: Alex Bennée @ 2023-02-23 15:57 UTC (permalink / raw)
To: qemu-devel
Cc: peter.maydell, Thomas Huth, Alex Bennée,
Philippe Mathieu-Daudé, Yonggang Luo
From: Thomas Huth <thuth@redhat.com>
There's no need to run a full-blown bash just to create a directory.
And we can skip the "cd build" each time by doing it once at the
beginning.
Additionally, let's exclude some targets (that we already compile-test
with MinGW in the gitlab jobs) from the build, since the build time of
this task is very long already (between 80 and 90 minutes).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230208103046.618154-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230221094558.2864616-15-alex.bennee@linaro.org>
diff --git a/.cirrus.yml b/.cirrus.yml
index 4895987da4..5fb00da73d 100644
--- a/.cirrus.yml
+++ b/.cirrus.yml
@@ -100,9 +100,11 @@ windows_msys2_task:
tar xf C:\tools\archive\msys64.tar
Write-Output "Extract msys2 time taken: $((Get-Date).Subtract($start_time))"
script:
- - C:\tools\msys64\usr\bin\bash.exe -lc "mkdir build"
- - C:\tools\msys64\usr\bin\bash.exe -lc "cd build && ../configure --python=python3"
- - C:\tools\msys64\usr\bin\bash.exe -lc "cd build && make -j8"
+ - mkdir build
+ - cd build
+ - C:\tools\msys64\usr\bin\bash.exe -lc "../configure --python=python3
+ --target-list-exclude=i386-softmmu,ppc64-softmmu,aarch64-softmmu,mips64-softmmu,mipsel-softmmu,sh4-softmmu"
+ - C:\tools\msys64\usr\bin\bash.exe -lc "make -j8"
- exit $LastExitCode
test_script:
- C:\tools\msys64\usr\bin\bash.exe -lc "cd build && make V=1 check"
--
2.39.1
^ permalink raw reply related [flat|nested] 21+ messages in thread* Re: [PULL 00/13] testing updates (gitlab, cirrus, docker, avocado, windows)
2023-02-23 15:57 [PULL 00/13] testing updates (gitlab, cirrus, docker, avocado, windows) Alex Bennée
` (12 preceding siblings ...)
2023-02-23 15:57 ` [PULL 13/13] cirrus.yml: Improve the windows_msys2_task Alex Bennée
@ 2023-02-24 18:55 ` Peter Maydell
2023-02-24 19:52 ` Alex Bennée
2023-02-27 11:58 ` Peter Maydell
14 siblings, 1 reply; 21+ messages in thread
From: Peter Maydell @ 2023-02-24 18:55 UTC (permalink / raw)
To: Alex Bennée; +Cc: qemu-devel
On Thu, 23 Feb 2023 at 15:57, Alex Bennée <alex.bennee@linaro.org> wrote:
>
> The following changes since commit 79b677d658d3d35e1e776826ac4abb28cdce69b8:
>
> Merge tag 'net-pull-request' of https://github.com/jasowang/qemu into staging (2023-02-21 11:28:31 +0000)
>
> are available in the Git repository at:
>
> https://gitlab.com/stsquad/qemu.git tags/pull-testing-next-230223-1
>
> for you to fetch changes up to e9969376f01180d7bcbee25ae8333983da7eda2c:
>
> cirrus.yml: Improve the windows_msys2_task (2023-02-23 15:48:23 +0000)
>
> ----------------------------------------------------------------
> testing updates:
>
> - ensure socat available for tests
> - skip socat tests for MacOS
> - properly clean up fifos after use
> - make fp-test less chatty
> - store test artefacts on Cirrus
> - control custom runners with QEMU_CI knobs
> - disable benchmark runs under tsan build
> - update ubuntu 2004 to 2204
> - skip nios2 kernel replay test
> - add tuxrun baselines to avocado
> - binary build of tricore tools
> - export test results on cross builds
> - improve windows builds
>
> ----------------------------------------------------------------
So I've been applying pullreqs relying on a combination of the
private-runner CI jobs plus using the free minutes allowance
on my personal gitlab account, and ad-hoc local builds. I'm
a bit reluctant to do that for this one though, because it's
touching all the gitlab config and we won't be able test that
that is OK until we can do a full run with the standard config.
What do you think ?
thanks
-- PMM
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: [PULL 00/13] testing updates (gitlab, cirrus, docker, avocado, windows)
2023-02-24 18:55 ` [PULL 00/13] testing updates (gitlab, cirrus, docker, avocado, windows) Peter Maydell
@ 2023-02-24 19:52 ` Alex Bennée
2023-02-24 21:23 ` Philippe Mathieu-Daudé
0 siblings, 1 reply; 21+ messages in thread
From: Alex Bennée @ 2023-02-24 19:52 UTC (permalink / raw)
To: Peter Maydell; +Cc: qemu-devel
Peter Maydell <peter.maydell@linaro.org> writes:
> On Thu, 23 Feb 2023 at 15:57, Alex Bennée <alex.bennee@linaro.org> wrote:
>>
>> The following changes since commit 79b677d658d3d35e1e776826ac4abb28cdce69b8:
>>
>> Merge tag 'net-pull-request' of https://github.com/jasowang/qemu
>> into staging (2023-02-21 11:28:31 +0000)
>>
>> are available in the Git repository at:
>>
>> https://gitlab.com/stsquad/qemu.git tags/pull-testing-next-230223-1
>>
>> for you to fetch changes up to e9969376f01180d7bcbee25ae8333983da7eda2c:
>>
>> cirrus.yml: Improve the windows_msys2_task (2023-02-23 15:48:23 +0000)
>>
>> ----------------------------------------------------------------
>> testing updates:
>>
>> - ensure socat available for tests
>> - skip socat tests for MacOS
>> - properly clean up fifos after use
>> - make fp-test less chatty
>> - store test artefacts on Cirrus
>> - control custom runners with QEMU_CI knobs
>> - disable benchmark runs under tsan build
>> - update ubuntu 2004 to 2204
>> - skip nios2 kernel replay test
>> - add tuxrun baselines to avocado
>> - binary build of tricore tools
>> - export test results on cross builds
>> - improve windows builds
>>
>> ----------------------------------------------------------------
>
> So I've been applying pullreqs relying on a combination of the
> private-runner CI jobs plus using the free minutes allowance
> on my personal gitlab account, and ad-hoc local builds. I'm
> a bit reluctant to do that for this one though, because it's
> touching all the gitlab config and we won't be able test that
> that is OK until we can do a full run with the standard config.
> What do you think ?
This was my run of the tag:
https://gitlab.com/stsquad/qemu/-/pipelines/787068318/
The FreeBSD failure is the dodgy migration test and the openbsi/edk2
builds fails as 18.04 just went EOL I think. I don't currently have the
s390x runner on my config.
>
> thanks
> -- PMM
--
Alex Bennée
Virtualisation Tech Lead @ Linaro
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PULL 00/13] testing updates (gitlab, cirrus, docker, avocado, windows)
2023-02-24 19:52 ` Alex Bennée
@ 2023-02-24 21:23 ` Philippe Mathieu-Daudé
2023-02-26 20:13 ` Peter Maydell
0 siblings, 1 reply; 21+ messages in thread
From: Philippe Mathieu-Daudé @ 2023-02-24 21:23 UTC (permalink / raw)
To: Alex Bennée, Peter Maydell; +Cc: qemu-devel
On 24/2/23 20:52, Alex Bennée wrote:
>
> Peter Maydell <peter.maydell@linaro.org> writes:
>
>> On Thu, 23 Feb 2023 at 15:57, Alex Bennée <alex.bennee@linaro.org> wrote:
>>>
>>> The following changes since commit 79b677d658d3d35e1e776826ac4abb28cdce69b8:
>>>
>>> Merge tag 'net-pull-request' of https://github.com/jasowang/qemu
>>> into staging (2023-02-21 11:28:31 +0000)
>>>
>>> are available in the Git repository at:
>>>
>>> https://gitlab.com/stsquad/qemu.git tags/pull-testing-next-230223-1
>>>
>>> for you to fetch changes up to e9969376f01180d7bcbee25ae8333983da7eda2c:
>>>
>>> cirrus.yml: Improve the windows_msys2_task (2023-02-23 15:48:23 +0000)
>>>
>>> ----------------------------------------------------------------
>>> testing updates:
>>>
>>> - ensure socat available for tests
>>> - skip socat tests for MacOS
>>> - properly clean up fifos after use
>>> - make fp-test less chatty
>>> - store test artefacts on Cirrus
>>> - control custom runners with QEMU_CI knobs
>>> - disable benchmark runs under tsan build
>>> - update ubuntu 2004 to 2204
>>> - skip nios2 kernel replay test
>>> - add tuxrun baselines to avocado
>>> - binary build of tricore tools
>>> - export test results on cross builds
>>> - improve windows builds
>>>
>>> ----------------------------------------------------------------
>>
>> So I've been applying pullreqs relying on a combination of the
>> private-runner CI jobs plus using the free minutes allowance
>> on my personal gitlab account, and ad-hoc local builds. I'm
>> a bit reluctant to do that for this one though, because it's
>> touching all the gitlab config and we won't be able test that
>> that is OK until we can do a full run with the standard config.
>> What do you think ?
What is the alternative, waiting 5 days up to March 1st?
> This was my run of the tag:
>
> https://gitlab.com/stsquad/qemu/-/pipelines/787068318/
>
> The FreeBSD failure is the dodgy migration test and the openbsi/edk2
> builds fails as 18.04 just went EOL I think. I don't currently have the
> s390x runner on my config.
>
>>
>> thanks
>> -- PMM
>
>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PULL 00/13] testing updates (gitlab, cirrus, docker, avocado, windows)
2023-02-24 21:23 ` Philippe Mathieu-Daudé
@ 2023-02-26 20:13 ` Peter Maydell
2023-03-01 10:02 ` Alex Bennée
0 siblings, 1 reply; 21+ messages in thread
From: Peter Maydell @ 2023-02-26 20:13 UTC (permalink / raw)
To: Philippe Mathieu-Daudé; +Cc: Alex Bennée, qemu-devel
On Fri, 24 Feb 2023 at 21:23, Philippe Mathieu-Daudé <philmd@linaro.org> wrote:
>
> On 24/2/23 20:52, Alex Bennée wrote:
> >
> > Peter Maydell <peter.maydell@linaro.org> writes:
> >
> >> On Thu, 23 Feb 2023 at 15:57, Alex Bennée <alex.bennee@linaro.org> wrote:
> >>>
> >>> The following changes since commit 79b677d658d3d35e1e776826ac4abb28cdce69b8:
> >>>
> >>> Merge tag 'net-pull-request' of https://github.com/jasowang/qemu
> >>> into staging (2023-02-21 11:28:31 +0000)
> >>>
> >>> are available in the Git repository at:
> >>>
> >>> https://gitlab.com/stsquad/qemu.git tags/pull-testing-next-230223-1
> >>>
> >>> for you to fetch changes up to e9969376f01180d7bcbee25ae8333983da7eda2c:
> >>>
> >>> cirrus.yml: Improve the windows_msys2_task (2023-02-23 15:48:23 +0000)
> >>>
> >>> ----------------------------------------------------------------
> >>> testing updates:
> >>>
> >>> - ensure socat available for tests
> >>> - skip socat tests for MacOS
> >>> - properly clean up fifos after use
> >>> - make fp-test less chatty
> >>> - store test artefacts on Cirrus
> >>> - control custom runners with QEMU_CI knobs
> >>> - disable benchmark runs under tsan build
> >>> - update ubuntu 2004 to 2204
> >>> - skip nios2 kernel replay test
> >>> - add tuxrun baselines to avocado
> >>> - binary build of tricore tools
> >>> - export test results on cross builds
> >>> - improve windows builds
> >>>
> >>> ----------------------------------------------------------------
> >>
> >> So I've been applying pullreqs relying on a combination of the
> >> private-runner CI jobs plus using the free minutes allowance
> >> on my personal gitlab account, and ad-hoc local builds. I'm
> >> a bit reluctant to do that for this one though, because it's
> >> touching all the gitlab config and we won't be able test that
> >> that is OK until we can do a full run with the standard config.
> >> What do you think ?
>
> What is the alternative, waiting 5 days up to March 1st?
That would be the other option, yes.
-- PMM
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PULL 00/13] testing updates (gitlab, cirrus, docker, avocado, windows)
2023-02-26 20:13 ` Peter Maydell
@ 2023-03-01 10:02 ` Alex Bennée
0 siblings, 0 replies; 21+ messages in thread
From: Alex Bennée @ 2023-03-01 10:02 UTC (permalink / raw)
To: Peter Maydell; +Cc: Philippe Mathieu-Daudé, qemu-devel
Peter Maydell <peter.maydell@linaro.org> writes:
> On Fri, 24 Feb 2023 at 21:23, Philippe Mathieu-Daudé <philmd@linaro.org> wrote:
>>
>> On 24/2/23 20:52, Alex Bennée wrote:
>> >
>> > Peter Maydell <peter.maydell@linaro.org> writes:
>> >
>> >> On Thu, 23 Feb 2023 at 15:57, Alex Bennée <alex.bennee@linaro.org> wrote:
>> >>>
>> >>> The following changes since commit 79b677d658d3d35e1e776826ac4abb28cdce69b8:
>> >>>
>> >>> Merge tag 'net-pull-request' of https://github.com/jasowang/qemu
>> >>> into staging (2023-02-21 11:28:31 +0000)
>> >>>
>> >>> are available in the Git repository at:
>> >>>
>> >>> https://gitlab.com/stsquad/qemu.git tags/pull-testing-next-230223-1
>> >>>
>> >>> for you to fetch changes up to e9969376f01180d7bcbee25ae8333983da7eda2c:
>> >>>
>> >>> cirrus.yml: Improve the windows_msys2_task (2023-02-23 15:48:23 +0000)
>> >>>
>> >>> ----------------------------------------------------------------
>> >>> testing updates:
>> >>>
>> >>> - ensure socat available for tests
>> >>> - skip socat tests for MacOS
>> >>> - properly clean up fifos after use
>> >>> - make fp-test less chatty
>> >>> - store test artefacts on Cirrus
>> >>> - control custom runners with QEMU_CI knobs
>> >>> - disable benchmark runs under tsan build
>> >>> - update ubuntu 2004 to 2204
>> >>> - skip nios2 kernel replay test
>> >>> - add tuxrun baselines to avocado
>> >>> - binary build of tricore tools
>> >>> - export test results on cross builds
>> >>> - improve windows builds
>> >>>
>> >>> ----------------------------------------------------------------
>> >>
>> >> So I've been applying pullreqs relying on a combination of the
>> >> private-runner CI jobs plus using the free minutes allowance
>> >> on my personal gitlab account, and ad-hoc local builds. I'm
>> >> a bit reluctant to do that for this one though, because it's
>> >> touching all the gitlab config and we won't be able test that
>> >> that is OK until we can do a full run with the standard config.
>> >> What do you think ?
>>
>> What is the alternative, waiting 5 days up to March 1st?
>
> That would be the other option, yes.
As the PR needs a re-base anyway please drop this and I'll respin with
the additional patches from yesterday's testing/next post.
--
Alex Bennée
Virtualisation Tech Lead @ Linaro
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PULL 00/13] testing updates (gitlab, cirrus, docker, avocado, windows)
2023-02-23 15:57 [PULL 00/13] testing updates (gitlab, cirrus, docker, avocado, windows) Alex Bennée
` (13 preceding siblings ...)
2023-02-24 18:55 ` [PULL 00/13] testing updates (gitlab, cirrus, docker, avocado, windows) Peter Maydell
@ 2023-02-27 11:58 ` Peter Maydell
2023-02-27 14:59 ` Alex Bennée
14 siblings, 1 reply; 21+ messages in thread
From: Peter Maydell @ 2023-02-27 11:58 UTC (permalink / raw)
To: Alex Bennée; +Cc: qemu-devel
On Thu, 23 Feb 2023 at 15:57, Alex Bennée <alex.bennee@linaro.org> wrote:
>
> The following changes since commit 79b677d658d3d35e1e776826ac4abb28cdce69b8:
>
> Merge tag 'net-pull-request' of https://github.com/jasowang/qemu into staging (2023-02-21 11:28:31 +0000)
>
> are available in the Git repository at:
>
> https://gitlab.com/stsquad/qemu.git tags/pull-testing-next-230223-1
>
> for you to fetch changes up to e9969376f01180d7bcbee25ae8333983da7eda2c:
>
> cirrus.yml: Improve the windows_msys2_task (2023-02-23 15:48:23 +0000)
>
> ----------------------------------------------------------------
> testing updates:
>
> - ensure socat available for tests
> - skip socat tests for MacOS
> - properly clean up fifos after use
> - make fp-test less chatty
> - store test artefacts on Cirrus
> - control custom runners with QEMU_CI knobs
> - disable benchmark runs under tsan build
> - update ubuntu 2004 to 2204
> - skip nios2 kernel replay test
> - add tuxrun baselines to avocado
> - binary build of tricore tools
> - export test results on cross builds
> - improve windows builds
This hangs when I try to merge it, and eventually times out:
Switched to branch 'master'
Your branch is up-to-date with 'origin/master'.
Already up-to-date.
Switched to branch 'staging'
fetching from remote https://gitlab.com/stsquad/qemu.git
tags/pull-testing-next-230223-1
remote: Enumerating objects: 108, done.
remote: Counting objects: 100% (108/108), done.
remote: Compressing objects: 100% (50/50), done.
remote: Total 108 (delta 59), reused 93 (delta 57), pack-reused 0
Receiving objects: 100% (108/108), 100.58 KiB | 7.74 MiB/s, done.
Resolving deltas: 100% (59/59), completed with 23 local objects.
From https://gitlab.com/stsquad/qemu
* tag pull-testing-next-230223-1 -> FETCH_HEAD
Fetching submodule tests/fp/berkeley-testfloat-3
fatal: unable to connect to github.com:
github.com[0: 140.82.121.3]: errno=Connection timed out
I don't understand why anything is trying to fetch from github
in the first place: the URL for the testfloat-3 submodule
is a gitlab one..
-- PMM
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: [PULL 00/13] testing updates (gitlab, cirrus, docker, avocado, windows)
2023-02-27 11:58 ` Peter Maydell
@ 2023-02-27 14:59 ` Alex Bennée
0 siblings, 0 replies; 21+ messages in thread
From: Alex Bennée @ 2023-02-27 14:59 UTC (permalink / raw)
To: Peter Maydell; +Cc: qemu-devel
Peter Maydell <peter.maydell@linaro.org> writes:
> On Thu, 23 Feb 2023 at 15:57, Alex Bennée <alex.bennee@linaro.org> wrote:
>>
>> The following changes since commit 79b677d658d3d35e1e776826ac4abb28cdce69b8:
>>
>> Merge tag 'net-pull-request' of https://github.com/jasowang/qemu
>> into staging (2023-02-21 11:28:31 +0000)
>>
>> are available in the Git repository at:
>>
>> https://gitlab.com/stsquad/qemu.git tags/pull-testing-next-230223-1
>>
>> for you to fetch changes up to e9969376f01180d7bcbee25ae8333983da7eda2c:
>>
>> cirrus.yml: Improve the windows_msys2_task (2023-02-23 15:48:23 +0000)
>>
>> ----------------------------------------------------------------
>> testing updates:
>>
>> - ensure socat available for tests
>> - skip socat tests for MacOS
>> - properly clean up fifos after use
>> - make fp-test less chatty
>> - store test artefacts on Cirrus
>> - control custom runners with QEMU_CI knobs
>> - disable benchmark runs under tsan build
>> - update ubuntu 2004 to 2204
>> - skip nios2 kernel replay test
>> - add tuxrun baselines to avocado
>> - binary build of tricore tools
>> - export test results on cross builds
>> - improve windows builds
>
> This hangs when I try to merge it, and eventually times out:
>
> Switched to branch 'master'
> Your branch is up-to-date with 'origin/master'.
> Already up-to-date.
> Switched to branch 'staging'
> fetching from remote https://gitlab.com/stsquad/qemu.git
> tags/pull-testing-next-230223-1
> remote: Enumerating objects: 108, done.
> remote: Counting objects: 100% (108/108), done.
> remote: Compressing objects: 100% (50/50), done.
> remote: Total 108 (delta 59), reused 93 (delta 57), pack-reused 0
> Receiving objects: 100% (108/108), 100.58 KiB | 7.74 MiB/s, done.
> Resolving deltas: 100% (59/59), completed with 23 local objects.
> From https://gitlab.com/stsquad/qemu
> * tag pull-testing-next-230223-1 -> FETCH_HEAD
> Fetching submodule tests/fp/berkeley-testfloat-3
>
> fatal: unable to connect to github.com:
> github.com[0: 140.82.121.3]: errno=Connection timed out
>
>
> I don't understand why anything is trying to fetch from github
> in the first place: the URL for the testfloat-3 submodule
> is a gitlab one..
I think the underlying config needs updating:
.git/modules/tests/fp/berkeley-testfloat-3/config
I'm surprised the git config for submodules doesn't carry the metadata.
--
Alex Bennée
Virtualisation Tech Lead @ Linaro
^ permalink raw reply [flat|nested] 21+ messages in thread