From: "Philippe Mathieu-Daudé" <philmd@linaro.org>
To: qemu-devel@nongnu.org
Cc: "Michael S. Tsirkin" <mst@redhat.com>,
"Peter Maydell" <peter.maydell@linaro.org>,
"John Snow" <jsnow@redhat.com>,
"Paolo Bonzini" <pbonzini@redhat.com>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Richard Henderson" <richard.henderson@linaro.org>
Subject: [PULL 011/123] target/hppa: Extract system helpers to sys_helper.c
Date: Mon, 27 Feb 2023 13:36:55 +0100 [thread overview]
Message-ID: <20230227123847.27110-12-philmd@linaro.org> (raw)
In-Reply-To: <20230227123847.27110-1-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221217173219.8715-3-philmd@linaro.org>
---
target/hppa/meson.build | 1 +
target/hppa/op_helper.c | 77 -------------------------------
target/hppa/sys_helper.c | 99 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 100 insertions(+), 77 deletions(-)
create mode 100644 target/hppa/sys_helper.c
diff --git a/target/hppa/meson.build b/target/hppa/meson.build
index fb90aed5de..81b4b4e617 100644
--- a/target/hppa/meson.build
+++ b/target/hppa/meson.build
@@ -16,6 +16,7 @@ hppa_softmmu_ss = ss.source_set()
hppa_softmmu_ss.add(files(
'machine.c',
'mem_helper.c',
+ 'sys_helper.c',
))
target_arch += {'hppa': hppa_ss}
diff --git a/target/hppa/op_helper.c b/target/hppa/op_helper.c
index f5905c9fc2..32c27c66b2 100644
--- a/target/hppa/op_helper.c
+++ b/target/hppa/op_helper.c
@@ -24,7 +24,6 @@
#include "exec/helper-proto.h"
#include "exec/cpu_ldst.h"
#include "qemu/timer.h"
-#include "sysemu/runstate.h"
#include "trace.h"
G_NORETURN void HELPER(excp)(CPUHPPAState *env, int excp)
@@ -209,79 +208,3 @@ target_ureg HELPER(read_interval_timer)(void)
return qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) >> 2;
#endif
}
-
-#ifndef CONFIG_USER_ONLY
-void HELPER(write_interval_timer)(CPUHPPAState *env, target_ureg val)
-{
- HPPACPU *cpu = env_archcpu(env);
- uint64_t current = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
- uint64_t timeout;
-
- /* Even in 64-bit mode, the comparator is always 32-bit. But the
- value we expose to the guest is 1/4 of the speed of the clock,
- so moosh in 34 bits. */
- timeout = deposit64(current, 0, 34, (uint64_t)val << 2);
-
- /* If the mooshing puts the clock in the past, advance to next round. */
- if (timeout < current + 1000) {
- timeout += 1ULL << 34;
- }
-
- cpu->env.cr[CR_IT] = timeout;
- timer_mod(cpu->alarm_timer, timeout);
-}
-
-void HELPER(halt)(CPUHPPAState *env)
-{
- qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN);
- helper_excp(env, EXCP_HLT);
-}
-
-void HELPER(reset)(CPUHPPAState *env)
-{
- qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
- helper_excp(env, EXCP_HLT);
-}
-
-target_ureg HELPER(swap_system_mask)(CPUHPPAState *env, target_ureg nsm)
-{
- target_ulong psw = env->psw;
- /*
- * Setting the PSW Q bit to 1, if it was not already 1, is an
- * undefined operation.
- *
- * However, HP-UX 10.20 does this with the SSM instruction.
- * Tested this on HP9000/712 and HP9000/785/C3750 and both
- * machines set the Q bit from 0 to 1 without an exception,
- * so let this go without comment.
- */
- env->psw = (psw & ~PSW_SM) | (nsm & PSW_SM);
- return psw & PSW_SM;
-}
-
-void HELPER(rfi)(CPUHPPAState *env)
-{
- env->iasq_f = (uint64_t)env->cr[CR_IIASQ] << 32;
- env->iasq_b = (uint64_t)env->cr_back[0] << 32;
- env->iaoq_f = env->cr[CR_IIAOQ];
- env->iaoq_b = env->cr_back[1];
- cpu_hppa_put_psw(env, env->cr[CR_IPSW]);
-}
-
-void HELPER(getshadowregs)(CPUHPPAState *env)
-{
- env->gr[1] = env->shadow[0];
- env->gr[8] = env->shadow[1];
- env->gr[9] = env->shadow[2];
- env->gr[16] = env->shadow[3];
- env->gr[17] = env->shadow[4];
- env->gr[24] = env->shadow[5];
- env->gr[25] = env->shadow[6];
-}
-
-void HELPER(rfi_r)(CPUHPPAState *env)
-{
- helper_getshadowregs(env);
- helper_rfi(env);
-}
-#endif
diff --git a/target/hppa/sys_helper.c b/target/hppa/sys_helper.c
new file mode 100644
index 0000000000..b0dded9e07
--- /dev/null
+++ b/target/hppa/sys_helper.c
@@ -0,0 +1,99 @@
+/*
+ * Helpers for HPPA system instructions.
+ *
+ * Copyright (c) 2016 Richard Henderson <rth@twiddle.net>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "cpu.h"
+#include "exec/exec-all.h"
+#include "exec/helper-proto.h"
+#include "qemu/timer.h"
+#include "sysemu/runstate.h"
+
+void HELPER(write_interval_timer)(CPUHPPAState *env, target_ureg val)
+{
+ HPPACPU *cpu = env_archcpu(env);
+ uint64_t current = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+ uint64_t timeout;
+
+ /* Even in 64-bit mode, the comparator is always 32-bit. But the
+ value we expose to the guest is 1/4 of the speed of the clock,
+ so moosh in 34 bits. */
+ timeout = deposit64(current, 0, 34, (uint64_t)val << 2);
+
+ /* If the mooshing puts the clock in the past, advance to next round. */
+ if (timeout < current + 1000) {
+ timeout += 1ULL << 34;
+ }
+
+ cpu->env.cr[CR_IT] = timeout;
+ timer_mod(cpu->alarm_timer, timeout);
+}
+
+void HELPER(halt)(CPUHPPAState *env)
+{
+ qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN);
+ helper_excp(env, EXCP_HLT);
+}
+
+void HELPER(reset)(CPUHPPAState *env)
+{
+ qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
+ helper_excp(env, EXCP_HLT);
+}
+
+target_ureg HELPER(swap_system_mask)(CPUHPPAState *env, target_ureg nsm)
+{
+ target_ulong psw = env->psw;
+ /*
+ * Setting the PSW Q bit to 1, if it was not already 1, is an
+ * undefined operation.
+ *
+ * However, HP-UX 10.20 does this with the SSM instruction.
+ * Tested this on HP9000/712 and HP9000/785/C3750 and both
+ * machines set the Q bit from 0 to 1 without an exception,
+ * so let this go without comment.
+ */
+ env->psw = (psw & ~PSW_SM) | (nsm & PSW_SM);
+ return psw & PSW_SM;
+}
+
+void HELPER(rfi)(CPUHPPAState *env)
+{
+ env->iasq_f = (uint64_t)env->cr[CR_IIASQ] << 32;
+ env->iasq_b = (uint64_t)env->cr_back[0] << 32;
+ env->iaoq_f = env->cr[CR_IIAOQ];
+ env->iaoq_b = env->cr_back[1];
+ cpu_hppa_put_psw(env, env->cr[CR_IPSW]);
+}
+
+void HELPER(getshadowregs)(CPUHPPAState *env)
+{
+ env->gr[1] = env->shadow[0];
+ env->gr[8] = env->shadow[1];
+ env->gr[9] = env->shadow[2];
+ env->gr[16] = env->shadow[3];
+ env->gr[17] = env->shadow[4];
+ env->gr[24] = env->shadow[5];
+ env->gr[25] = env->shadow[6];
+}
+
+void HELPER(rfi_r)(CPUHPPAState *env)
+{
+ helper_getshadowregs(env);
+ helper_rfi(env);
+}
--
2.38.1
prev parent reply other threads:[~2023-02-27 12:41 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-27 12:36 [PULL 000/123] Buildsys / QOM / QDev / UI patches for 2023-02-27 Philippe Mathieu-Daudé
2023-02-27 12:36 ` [PULL 001/123] cpu: Remove capstone meson dependency Philippe Mathieu-Daudé
2023-02-27 12:36 ` [PULL 002/123] cpu: Move breakpoint helpers to common code Philippe Mathieu-Daudé
2023-02-27 12:36 ` [PULL 003/123] cputlb: Restrict SavedIOTLB to system emulation Philippe Mathieu-Daudé
2023-02-27 12:36 ` [PULL 004/123] gdbstub: Use vaddr type for generic insert/remove_breakpoint() API Philippe Mathieu-Daudé
2023-02-27 12:36 ` [PULL 005/123] target/cpu: Restrict cpu_get_phys_page_debug() handlers to sysemu Philippe Mathieu-Daudé
2023-02-27 12:36 ` [PULL 006/123] target/cpu: Restrict do_transaction_failed() " Philippe Mathieu-Daudé
2023-02-27 12:36 ` [PULL 007/123] target/i386: Remove NEED_CPU_H guard from target-specific headers Philippe Mathieu-Daudé
2023-02-27 12:36 ` [PULL 008/123] target/i386/cpu: Remove dead helper_lock() declaration Philippe Mathieu-Daudé
2023-02-27 12:36 ` [PULL 009/123] target/i386: Remove x86_cpu_dump_local_apic_state() dead stub Philippe Mathieu-Daudé
2023-02-27 12:36 ` [PULL 010/123] target/hppa: Extract FPU helpers to fpu_helper.c Philippe Mathieu-Daudé
2023-02-27 12:36 ` Philippe Mathieu-Daudé [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230227123847.27110-12-philmd@linaro.org \
--to=philmd@linaro.org \
--cc=jsnow@redhat.com \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).