qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PULL 07/25] target/arm: Wrap arm_rebuild_hflags calls with tcg_enabled
Date: Mon, 27 Feb 2023 14:00:44 +0000	[thread overview]
Message-ID: <20230227140102.3712344-8-peter.maydell@linaro.org> (raw)
In-Reply-To: <20230227140102.3712344-1-peter.maydell@linaro.org>

From: Fabiano Rosas <farosas@suse.de>

This is in preparation to moving the hflags code into its own file
under the tcg/ directory.

Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/boot.c             |  6 +++++-
 hw/intc/armv7m_nvic.c     | 20 +++++++++++++-------
 target/arm/arm-powerctl.c |  7 +++++--
 target/arm/cpu.c          |  3 ++-
 target/arm/helper.c       | 18 +++++++++++++-----
 target/arm/machine.c      |  5 ++++-
 6 files changed, 42 insertions(+), 17 deletions(-)

diff --git a/hw/arm/boot.c b/hw/arm/boot.c
index 3d7d11f782f..1e021c4a340 100644
--- a/hw/arm/boot.c
+++ b/hw/arm/boot.c
@@ -15,6 +15,7 @@
 #include "hw/arm/boot.h"
 #include "hw/arm/linux-boot-if.h"
 #include "sysemu/kvm.h"
+#include "sysemu/tcg.h"
 #include "sysemu/sysemu.h"
 #include "sysemu/numa.h"
 #include "hw/boards.h"
@@ -827,7 +828,10 @@ static void do_cpu_reset(void *opaque)
                 info->secondary_cpu_reset_hook(cpu, info);
             }
         }
-        arm_rebuild_hflags(env);
+
+        if (tcg_enabled()) {
+            arm_rebuild_hflags(env);
+        }
     }
 }
 
diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c
index e54553283f4..8e289051a40 100644
--- a/hw/intc/armv7m_nvic.c
+++ b/hw/intc/armv7m_nvic.c
@@ -18,6 +18,7 @@
 #include "hw/intc/armv7m_nvic.h"
 #include "hw/irq.h"
 #include "hw/qdev-properties.h"
+#include "sysemu/tcg.h"
 #include "sysemu/runstate.h"
 #include "target/arm/cpu.h"
 #include "exec/exec-all.h"
@@ -2454,8 +2455,10 @@ static MemTxResult nvic_sysreg_write(void *opaque, hwaddr addr,
     /* This is UNPREDICTABLE; treat as RAZ/WI */
 
  exit_ok:
-    /* Ensure any changes made are reflected in the cached hflags.  */
-    arm_rebuild_hflags(&s->cpu->env);
+    if (tcg_enabled()) {
+        /* Ensure any changes made are reflected in the cached hflags. */
+        arm_rebuild_hflags(&s->cpu->env);
+    }
     return MEMTX_OK;
 }
 
@@ -2636,11 +2639,14 @@ static void armv7m_nvic_reset(DeviceState *dev)
         }
     }
 
-    /*
-     * We updated state that affects the CPU's MMUidx and thus its hflags;
-     * and we can't guarantee that we run before the CPU reset function.
-     */
-    arm_rebuild_hflags(&s->cpu->env);
+    if (tcg_enabled()) {
+        /*
+         * We updated state that affects the CPU's MMUidx and thus its
+         * hflags; and we can't guarantee that we run before the CPU
+         * reset function.
+         */
+        arm_rebuild_hflags(&s->cpu->env);
+    }
 }
 
 static void nvic_systick_trigger(void *opaque, int n, int level)
diff --git a/target/arm/arm-powerctl.c b/target/arm/arm-powerctl.c
index b75f813b403..326a03153df 100644
--- a/target/arm/arm-powerctl.c
+++ b/target/arm/arm-powerctl.c
@@ -15,6 +15,7 @@
 #include "arm-powerctl.h"
 #include "qemu/log.h"
 #include "qemu/main-loop.h"
+#include "sysemu/tcg.h"
 
 #ifndef DEBUG_ARM_POWERCTL
 #define DEBUG_ARM_POWERCTL 0
@@ -127,8 +128,10 @@ static void arm_set_cpu_on_async_work(CPUState *target_cpu_state,
         target_cpu->env.regs[0] = info->context_id;
     }
 
-    /* CP15 update requires rebuilding hflags */
-    arm_rebuild_hflags(&target_cpu->env);
+    if (tcg_enabled()) {
+        /* CP15 update requires rebuilding hflags */
+        arm_rebuild_hflags(&target_cpu->env);
+    }
 
     /* Start the new CPU at the requested address */
     cpu_set_pc(target_cpu_state, info->entry);
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index da416f7b1cb..0b333a749f6 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -542,8 +542,9 @@ static void arm_cpu_reset_hold(Object *obj)
     if (tcg_enabled()) {
         hw_breakpoint_update_all(cpu);
         hw_watchpoint_update_all(cpu);
+
+        arm_rebuild_hflags(env);
     }
-    arm_rebuild_hflags(env);
 }
 
 #if defined(CONFIG_TCG) && !defined(CONFIG_USER_ONLY)
diff --git a/target/arm/helper.c b/target/arm/helper.c
index 07d41003654..af72e6d16c0 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -5173,7 +5173,7 @@ static void sctlr_write(CPUARMState *env, const ARMCPRegInfo *ri,
     /* This may enable/disable the MMU, so do a TLB flush.  */
     tlb_flush(CPU(cpu));
 
-    if (ri->type & ARM_CP_SUPPRESS_TB_END) {
+    if (tcg_enabled() && ri->type & ARM_CP_SUPPRESS_TB_END) {
         /*
          * Normally we would always end the TB on an SCTLR write; see the
          * comment in ARMCPRegInfo sctlr initialization below for why Xscale
@@ -6841,7 +6841,9 @@ void aarch64_set_svcr(CPUARMState *env, uint64_t new, uint64_t mask)
         memset(env->zarray, 0, sizeof(env->zarray));
     }
 
-    arm_rebuild_hflags(env);
+    if (tcg_enabled()) {
+        arm_rebuild_hflags(env);
+    }
 }
 
 static void svcr_write(CPUARMState *env, const ARMCPRegInfo *ri,
@@ -9886,7 +9888,7 @@ void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask,
     }
     mask &= ~CACHED_CPSR_BITS;
     env->uncached_cpsr = (env->uncached_cpsr & ~mask) | (val & mask);
-    if (rebuild_hflags) {
+    if (tcg_enabled() && rebuild_hflags) {
         arm_rebuild_hflags(env);
     }
 }
@@ -10445,7 +10447,10 @@ static void take_aarch32_exception(CPUARMState *env, int new_mode,
         env->regs[14] = env->regs[15] + offset;
     }
     env->regs[15] = newpc;
-    arm_rebuild_hflags(env);
+
+    if (tcg_enabled()) {
+        arm_rebuild_hflags(env);
+    }
 }
 
 static void arm_cpu_do_interrupt_aarch32_hyp(CPUState *cs)
@@ -11001,7 +11006,10 @@ static void arm_cpu_do_interrupt_aarch64(CPUState *cs)
     pstate_write(env, PSTATE_DAIF | new_mode);
     env->aarch64 = true;
     aarch64_restore_sp(env, new_el);
-    helper_rebuild_hflags_a64(env, new_el);
+
+    if (tcg_enabled()) {
+        helper_rebuild_hflags_a64(env, new_el);
+    }
 
     env->pc = addr;
 
diff --git a/target/arm/machine.c b/target/arm/machine.c
index fd6323f6d8a..fc4a4a40644 100644
--- a/target/arm/machine.c
+++ b/target/arm/machine.c
@@ -871,7 +871,10 @@ static int cpu_post_load(void *opaque, int version_id)
     if (!kvm_enabled()) {
         pmu_op_finish(&cpu->env);
     }
-    arm_rebuild_hflags(&cpu->env);
+
+    if (tcg_enabled()) {
+        arm_rebuild_hflags(&cpu->env);
+    }
 
     return 0;
 }
-- 
2.34.1



  parent reply	other threads:[~2023-02-27 14:03 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-27 14:00 [PULL 00/25] target-arm queue Peter Maydell
2023-02-27 14:00 ` [PULL 01/25] include/hw/arm/allwinner-a10.h: Remove superfluous includes from the header Peter Maydell
2023-02-27 14:00 ` [PULL 02/25] target/arm: Wrap breakpoint/watchpoint updates with tcg_enabled Peter Maydell
2023-02-27 14:00 ` [PULL 03/25] target/arm: Wrap TCG-only code in debug_helper.c Peter Maydell
2023-02-27 14:00 ` [PULL 04/25] target/arm: move translate modules to tcg/ Peter Maydell
2023-02-27 14:00 ` [PULL 05/25] target/arm: move helpers " Peter Maydell
2023-02-27 14:00 ` [PULL 06/25] target/arm: Move psci.c into the tcg directory Peter Maydell
2023-02-27 14:00 ` Peter Maydell [this message]
2023-02-27 14:00 ` [PULL 08/25] target/arm: Move hflags code " Peter Maydell
2023-02-27 14:00 ` [PULL 09/25] target/arm: Move regime_using_lpae_format into internal.h Peter Maydell
2023-02-27 14:00 ` [PULL 10/25] target/arm: Don't access TCG code when debugging with KVM Peter Maydell
2023-02-27 14:00 ` [PULL 11/25] cpu-defs.h: Expose CPUTLBEntryFull to non-TCG code Peter Maydell
2023-02-27 14:00 ` [PULL 12/25] tests/avocado: add machine:none tag to version.py Peter Maydell
2023-02-27 14:00 ` [PULL 13/25] hw/gpio/max7310: Simplify max7310_realize() Peter Maydell
2023-02-27 14:00 ` [PULL 14/25] hw/char/pl011: Un-inline pl011_create() Peter Maydell
2023-02-27 14:00 ` [PULL 15/25] hw/char/pl011: Open-code pl011_luminary_create() Peter Maydell
2023-02-27 14:00 ` [PULL 16/25] hw/char/xilinx_uartlite: Expose XILINX_UARTLITE QOM type Peter Maydell
2023-02-27 14:00 ` [PULL 17/25] hw/char/xilinx_uartlite: Open-code xilinx_uartlite_create() Peter Maydell
2023-02-27 14:00 ` [PULL 18/25] hw/char/cmsdk-apb-uart: Open-code cmsdk_apb_uart_create() Peter Maydell
2023-02-27 14:00 ` [PULL 19/25] hw/timer/cmsdk-apb-timer: Remove unused 'qdev-properties.h' header Peter Maydell
2023-02-27 14:00 ` [PULL 20/25] hw/intc/armv7m_nvic: Use QOM cast CPU() macro Peter Maydell
2023-02-27 14:00 ` [PULL 21/25] hw/arm/musicpal: Remove unused dummy MemoryRegion Peter Maydell
2023-02-27 14:00 ` [PULL 22/25] iothread: Remove unused IOThreadClass / IOTHREAD_CLASS Peter Maydell
2023-02-27 14:01 ` [PULL 23/25] hw/irq: Declare QOM macros using OBJECT_DECLARE_SIMPLE_TYPE() Peter Maydell
2023-02-27 14:01 ` [PULL 24/25] hw/or-irq: " Peter Maydell
2023-02-27 14:01 ` [PULL 25/25] hw: Replace qemu_or_irq typedef by OrIRQState Peter Maydell
2023-02-27 16:18 ` [PULL 00/25] target-arm queue Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230227140102.3712344-8-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).