From: Eric Auger <eric.auger@redhat.com>
To: eric.auger.pro@gmail.com, eric.auger@redhat.com,
richard.henderson@linaro.org, peter.maydell@linaro.org,
pbonzini@redhat.com, qemu-devel@nongnu.org
Cc: philmd@linaro.org
Subject: [PATCH v3] target/arm: Add raw_writes ops for register whose write induce TLB maintenance
Date: Tue, 28 Feb 2023 10:36:19 +0100 [thread overview]
Message-ID: <20230228093619.342575-1-eric.auger@redhat.com> (raw)
Some registers whose 'cooked' writefns induce TLB maintenance do
not have raw_writefn ops defined. If only the writefn ops is set
(ie. no raw_writefn is provided), it is assumed the cooked also
work as the raw one. For those registers it is not obvious the
tlb_flush works on KVM mode so better/safer setting the raw write.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
---
v2 -> v3:
- remove modifs related to ARM_CP_NO_RAW regs [Peter]
- do not add raw_writefn for hcr_writelow and hcr_writehigh
v1 -> v2:
- do not add raw_writefn if type is set to ARM_CP_NO_RAW [Peter]
---
target/arm/helper.c | 23 +++++++++++++----------
1 file changed, 13 insertions(+), 10 deletions(-)
diff --git a/target/arm/helper.c b/target/arm/helper.c
index 14af7ba095..42ada408cc 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -4184,14 +4184,14 @@ static const ARMCPRegInfo vmsa_cp_reginfo[] = {
.opc0 = 3, .opc1 = 0, .crn = 2, .crm = 0, .opc2 = 0,
.access = PL1_RW, .accessfn = access_tvm_trvm,
.fgt = FGT_TTBR0_EL1,
- .writefn = vmsa_ttbr_write, .resetvalue = 0,
+ .writefn = vmsa_ttbr_write, .resetvalue = 0, .raw_writefn = raw_write,
.bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr0_s),
offsetof(CPUARMState, cp15.ttbr0_ns) } },
{ .name = "TTBR1_EL1", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 0, .crn = 2, .crm = 0, .opc2 = 1,
.access = PL1_RW, .accessfn = access_tvm_trvm,
.fgt = FGT_TTBR1_EL1,
- .writefn = vmsa_ttbr_write, .resetvalue = 0,
+ .writefn = vmsa_ttbr_write, .resetvalue = 0, .raw_writefn = raw_write,
.bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr1_s),
offsetof(CPUARMState, cp15.ttbr1_ns) } },
{ .name = "TCR_EL1", .state = ARM_CP_STATE_AA64,
@@ -4451,13 +4451,13 @@ static const ARMCPRegInfo lpae_cp_reginfo[] = {
.type = ARM_CP_64BIT | ARM_CP_ALIAS,
.bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr0_s),
offsetof(CPUARMState, cp15.ttbr0_ns) },
- .writefn = vmsa_ttbr_write, },
+ .writefn = vmsa_ttbr_write, .raw_writefn = raw_write },
{ .name = "TTBR1", .cp = 15, .crm = 2, .opc1 = 1,
.access = PL1_RW, .accessfn = access_tvm_trvm,
.type = ARM_CP_64BIT | ARM_CP_ALIAS,
.bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr1_s),
offsetof(CPUARMState, cp15.ttbr1_ns) },
- .writefn = vmsa_ttbr_write, },
+ .writefn = vmsa_ttbr_write, .raw_writefn = raw_write },
};
static uint64_t aa64_fpcr_read(CPUARMState *env, const ARMCPRegInfo *ri)
@@ -5900,7 +5900,7 @@ static const ARMCPRegInfo el2_cp_reginfo[] = {
.type = ARM_CP_IO,
.opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 0,
.access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.hcr_el2),
- .writefn = hcr_write },
+ .writefn = hcr_write, .raw_writefn = raw_write },
{ .name = "HCR", .state = ARM_CP_STATE_AA32,
.type = ARM_CP_ALIAS | ARM_CP_IO,
.cp = 15, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 0,
@@ -5972,6 +5972,7 @@ static const ARMCPRegInfo el2_cp_reginfo[] = {
{ .name = "TCR_EL2", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 4, .crn = 2, .crm = 0, .opc2 = 2,
.access = PL2_RW, .writefn = vmsa_tcr_el12_write,
+ .raw_writefn = raw_write,
.fieldoffset = offsetof(CPUARMState, cp15.tcr_el[2]) },
{ .name = "VTCR", .state = ARM_CP_STATE_AA32,
.cp = 15, .opc1 = 4, .crn = 2, .crm = 1, .opc2 = 2,
@@ -5988,10 +5989,10 @@ static const ARMCPRegInfo el2_cp_reginfo[] = {
.type = ARM_CP_64BIT | ARM_CP_ALIAS,
.access = PL2_RW, .accessfn = access_el3_aa32ns,
.fieldoffset = offsetof(CPUARMState, cp15.vttbr_el2),
- .writefn = vttbr_write },
+ .writefn = vttbr_write, .raw_writefn = raw_write },
{ .name = "VTTBR_EL2", .state = ARM_CP_STATE_AA64,
.opc0 = 3, .opc1 = 4, .crn = 2, .crm = 1, .opc2 = 0,
- .access = PL2_RW, .writefn = vttbr_write,
+ .access = PL2_RW, .writefn = vttbr_write, .raw_writefn = raw_write,
.fieldoffset = offsetof(CPUARMState, cp15.vttbr_el2) },
{ .name = "SCTLR_EL2", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 4, .crn = 1, .crm = 0, .opc2 = 0,
@@ -6003,7 +6004,8 @@ static const ARMCPRegInfo el2_cp_reginfo[] = {
.fieldoffset = offsetof(CPUARMState, cp15.tpidr_el[2]) },
{ .name = "TTBR0_EL2", .state = ARM_CP_STATE_AA64,
.opc0 = 3, .opc1 = 4, .crn = 2, .crm = 0, .opc2 = 0,
- .access = PL2_RW, .resetvalue = 0, .writefn = vmsa_tcr_ttbr_el2_write,
+ .access = PL2_RW, .resetvalue = 0,
+ .writefn = vmsa_tcr_ttbr_el2_write, .raw_writefn = raw_write,
.fieldoffset = offsetof(CPUARMState, cp15.ttbr0_el[2]) },
{ .name = "HTTBR", .cp = 15, .opc1 = 4, .crm = 2,
.access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_ALIAS,
@@ -6190,12 +6192,12 @@ static const ARMCPRegInfo el3_cp_reginfo[] = {
{ .name = "SCR_EL3", .state = ARM_CP_STATE_AA64,
.opc0 = 3, .opc1 = 6, .crn = 1, .crm = 1, .opc2 = 0,
.access = PL3_RW, .fieldoffset = offsetof(CPUARMState, cp15.scr_el3),
- .resetfn = scr_reset, .writefn = scr_write },
+ .resetfn = scr_reset, .writefn = scr_write, .raw_writefn = raw_write },
{ .name = "SCR", .type = ARM_CP_ALIAS | ARM_CP_NEWEL,
.cp = 15, .opc1 = 0, .crn = 1, .crm = 1, .opc2 = 0,
.access = PL1_RW, .accessfn = access_trap_aa32s_el1,
.fieldoffset = offsetoflow32(CPUARMState, cp15.scr_el3),
- .writefn = scr_write },
+ .writefn = scr_write, .raw_writefn = raw_write },
{ .name = "SDER32_EL3", .state = ARM_CP_STATE_AA64,
.opc0 = 3, .opc1 = 6, .crn = 1, .crm = 1, .opc2 = 1,
.access = PL3_RW, .resetvalue = 0,
@@ -7839,6 +7841,7 @@ static const ARMCPRegInfo vhe_reginfo[] = {
{ .name = "TTBR1_EL2", .state = ARM_CP_STATE_AA64,
.opc0 = 3, .opc1 = 4, .crn = 2, .crm = 0, .opc2 = 1,
.access = PL2_RW, .writefn = vmsa_tcr_ttbr_el2_write,
+ .raw_writefn = raw_write,
.fieldoffset = offsetof(CPUARMState, cp15.ttbr1_el[2]) },
#ifndef CONFIG_USER_ONLY
{ .name = "CNTHV_CVAL_EL2", .state = ARM_CP_STATE_AA64,
--
2.38.1
next reply other threads:[~2023-02-28 9:37 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-28 9:36 Eric Auger [this message]
2023-06-23 16:43 ` [PATCH v3] target/arm: Add raw_writes ops for register whose write induce TLB maintenance Eric Auger
2023-06-27 12:23 ` Peter Maydell
2023-06-27 12:24 ` Eric Auger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230228093619.342575-1-eric.auger@redhat.com \
--to=eric.auger@redhat.com \
--cc=eric.auger.pro@gmail.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=philmd@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).