From: Jason Wang <jasowang@redhat.com>
To: qemu-devel@nongnu.org, peter.maydell@linaro.org
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>,
Jason Wang <jasowang@redhat.com>
Subject: [PULL 09/51] e1000e: Use more constant definitions
Date: Tue, 7 Mar 2023 15:07:34 +0800 [thread overview]
Message-ID: <20230307070816.34833-10-jasowang@redhat.com> (raw)
In-Reply-To: <20230307070816.34833-1-jasowang@redhat.com>
From: Akihiko Odaki <akihiko.odaki@daynix.com>
The definitions of SW Semaphore Register were copied from:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/drivers/net/ethernet/intel/e1000e/defines.h?h=v6.0.9#n374
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
hw/net/e1000_regs.h | 7 +++++++
hw/net/e1000e_core.c | 49 +++++++++++++++++++++++++++----------------------
2 files changed, 34 insertions(+), 22 deletions(-)
diff --git a/hw/net/e1000_regs.h b/hw/net/e1000_regs.h
index 3f6b5d0..6a36573 100644
--- a/hw/net/e1000_regs.h
+++ b/hw/net/e1000_regs.h
@@ -525,6 +525,13 @@
#define M88E1000_PHY_VCO_REG_BIT8 0x100 /* Bits 8 & 11 are adjusted for */
#define M88E1000_PHY_VCO_REG_BIT11 0x800 /* improved BER performance */
+/* SW Semaphore Register */
+#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
+#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */
+#define E1000_SWSM_DRV_LOAD 0x00000008 /* Driver Loaded Bit */
+
+#define E1000_SWSM2_LOCK 0x00000002 /* Secondary driver semaphore bit */
+
/* Interrupt Cause Read */
#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */
#define E1000_ICR_TXQE 0x00000002 /* Transmit Queue empty */
diff --git a/hw/net/e1000e_core.c b/hw/net/e1000e_core.c
index e6fc85e..6a4da72 100644
--- a/hw/net/e1000e_core.c
+++ b/hw/net/e1000e_core.c
@@ -1022,10 +1022,11 @@ e1000e_receive_filter(E1000ECore *core, const uint8_t *buf, int size)
if (e1000x_is_vlan_packet(buf, core->mac[VET]) &&
e1000x_vlan_rx_filter_enabled(core->mac)) {
- uint16_t vid = lduw_be_p(buf + 14);
- uint32_t vfta = ldl_le_p((uint32_t *)(core->mac + VFTA) +
- ((vid >> 5) & 0x7f));
- if ((vfta & (1 << (vid & 0x1f))) == 0) {
+ uint16_t vid = lduw_be_p(&PKT_GET_VLAN_HDR(buf)->h_tci);
+ uint32_t vfta =
+ ldl_le_p((uint32_t *)(core->mac + VFTA) +
+ ((vid >> E1000_VFTA_ENTRY_SHIFT) & E1000_VFTA_ENTRY_MASK));
+ if ((vfta & (1 << (vid & E1000_VFTA_ENTRY_BIT_SHIFT_MASK))) == 0) {
trace_e1000e_rx_flt_vlan_mismatch(vid);
return false;
} else {
@@ -1679,16 +1680,13 @@ e1000e_rx_fix_l4_csum(E1000ECore *core, struct NetRxPkt *pkt)
}
}
-/* Min. octets in an ethernet frame sans FCS */
-#define MIN_BUF_SIZE 60
-
ssize_t
e1000e_receive_iov(E1000ECore *core, const struct iovec *iov, int iovcnt)
{
- static const int maximum_ethernet_hdr_len = (14 + 4);
+ static const int maximum_ethernet_hdr_len = (ETH_HLEN + 4);
uint32_t n = 0;
- uint8_t min_buf[MIN_BUF_SIZE];
+ uint8_t min_buf[ETH_ZLEN];
struct iovec min_iov;
uint8_t *filter_buf;
size_t size, orig_size;
@@ -2627,7 +2625,7 @@ static uint32_t
e1000e_mac_swsm_read(E1000ECore *core, int index)
{
uint32_t val = core->mac[SWSM];
- core->mac[SWSM] = val | 1;
+ core->mac[SWSM] = val | E1000_SWSM_SMBI;
return val;
}
@@ -3092,8 +3090,8 @@ static const readops e1000e_macreg_readops[] = {
[IP4AT ... IP4AT + 6] = e1000e_mac_readreg,
[RA ... RA + 31] = e1000e_mac_readreg,
[WUPM ... WUPM + 31] = e1000e_mac_readreg,
- [MTA ... MTA + 127] = e1000e_mac_readreg,
- [VFTA ... VFTA + 127] = e1000e_mac_readreg,
+ [MTA ... MTA + E1000_MC_TBL_SIZE - 1] = e1000e_mac_readreg,
+ [VFTA ... VFTA + E1000_VLAN_FILTER_TBL_SIZE - 1] = e1000e_mac_readreg,
[FFMT ... FFMT + 254] = e1000e_mac_readreg,
[FFVT ... FFVT + 254] = e1000e_mac_readreg,
[MDEF ... MDEF + 7] = e1000e_mac_readreg,
@@ -3245,8 +3243,8 @@ static const writeops e1000e_macreg_writeops[] = {
[IP4AT ... IP4AT + 6] = e1000e_mac_writereg,
[RA + 2 ... RA + 31] = e1000e_mac_writereg,
[WUPM ... WUPM + 31] = e1000e_mac_writereg,
- [MTA ... MTA + 127] = e1000e_mac_writereg,
- [VFTA ... VFTA + 127] = e1000e_mac_writereg,
+ [MTA ... MTA + E1000_MC_TBL_SIZE - 1] = e1000e_mac_writereg,
+ [VFTA ... VFTA + E1000_VLAN_FILTER_TBL_SIZE - 1] = e1000e_mac_writereg,
[FFMT ... FFMT + 254] = e1000e_set_4bit,
[FFVT ... FFVT + 254] = e1000e_mac_writereg,
[PBM ... PBM + 10239] = e1000e_mac_writereg,
@@ -3276,7 +3274,7 @@ static const uint16_t mac_reg_access[E1000E_MAC_SIZE] = {
[TDH_A] = 0x0cf8, [TDT_A] = 0x0cf8, [TIDV_A] = 0x0cf8,
[TDFH_A] = 0xed00, [TDFT_A] = 0xed00,
[RA_A ... RA_A + 31] = 0x14f0,
- [VFTA_A ... VFTA_A + 127] = 0x1400,
+ [VFTA_A ... VFTA_A + E1000_VLAN_FILTER_TBL_SIZE - 1] = 0x1400,
[RDBAL0_A ... RDLEN0_A] = 0x09bc,
[TDBAL_A ... TDLEN_A] = 0x0cf8,
/* Access options */
@@ -3433,13 +3431,20 @@ e1000e_phy_reg_init[E1000E_PHY_PAGES][E1000E_PHY_PAGE_SIZE] = {
[MII_PHYID1] = 0x141,
[MII_PHYID2] = E1000_PHY_ID2_82574x,
- [MII_ANAR] = 0xde1,
- [MII_ANLPAR] = 0x7e0,
- [MII_ANER] = BIT(2),
- [MII_ANNP] = BIT(0) | BIT(13),
- [MII_CTRL1000] = BIT(8) | BIT(9) | BIT(10) | BIT(11),
- [MII_STAT1000] = 0x3c00,
- [MII_EXTSTAT] = BIT(12) | BIT(13),
+ [MII_ANAR] = MII_ANAR_CSMACD | MII_ANAR_10 |
+ MII_ANAR_10FD | MII_ANAR_TX |
+ MII_ANAR_TXFD | MII_ANAR_PAUSE |
+ MII_ANAR_PAUSE_ASYM,
+ [MII_ANLPAR] = MII_ANLPAR_10 | MII_ANLPAR_10FD |
+ MII_ANLPAR_TX | MII_ANLPAR_TXFD |
+ MII_ANLPAR_T4 | MII_ANLPAR_PAUSE,
+ [MII_ANER] = MII_ANER_NP,
+ [MII_ANNP] = 1 | MII_ANNP_MP,
+ [MII_CTRL1000] = MII_CTRL1000_HALF | MII_CTRL1000_FULL |
+ MII_CTRL1000_PORT | MII_CTRL1000_MASTER,
+ [MII_STAT1000] = MII_STAT1000_HALF | MII_STAT1000_FULL |
+ MII_STAT1000_ROK | MII_STAT1000_LOK,
+ [MII_EXTSTAT] = MII_EXTSTAT_1000T_HD | MII_EXTSTAT_1000T_FD,
[PHY_COPPER_CTRL1] = BIT(5) | BIT(6) | BIT(8) | BIT(9) |
BIT(12) | BIT(13),
--
2.7.4
next prev parent reply other threads:[~2023-03-07 7:10 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-07 7:07 [PULL 00/51] Net patches Jason Wang
2023-03-07 7:07 ` [PULL 01/51] e1000e: Fix the code style Jason Wang
2023-03-07 7:07 ` [PULL 02/51] hw/net: Add more MII definitions Jason Wang
2023-03-07 7:07 ` [PULL 03/51] fsl_etsec: Use hw/net/mii.h Jason Wang
2023-03-07 7:07 ` [PULL 04/51] e1000: " Jason Wang
2023-03-07 7:07 ` [PULL 05/51] e1000: Mask registers when writing Jason Wang
2023-03-07 7:07 ` [PULL 06/51] e1000e: Introduce E1000E_LOW_BITS_SET_FUNC Jason Wang
2023-03-07 7:07 ` [PULL 07/51] e1000e: Mask registers when writing Jason Wang
2023-03-07 7:07 ` [PULL 08/51] e1000: Use more constant definitions Jason Wang
2023-03-07 7:07 ` Jason Wang [this message]
2023-03-07 7:07 ` [PULL 10/51] e1000: Use memcpy to intialize registers Jason Wang
2023-03-07 7:07 ` [PULL 11/51] e1000e: " Jason Wang
2023-03-07 7:07 ` [PULL 12/51] e1000e: Remove pending interrupt flags Jason Wang
2023-03-07 7:07 ` [PULL 13/51] e1000e: Improve software reset Jason Wang
2023-03-07 7:07 ` [PULL 14/51] e1000: Configure ResettableClass Jason Wang
2023-03-07 7:07 ` [PULL 15/51] e1000e: " Jason Wang
2023-03-07 7:07 ` [PULL 16/51] e1000e: Introduce e1000_rx_desc_union Jason Wang
2023-03-07 7:07 ` [PULL 17/51] e1000e: Set MII_ANER_NWAY Jason Wang
2023-03-07 7:07 ` [PULL 18/51] e1000e: Remove extra pointer indirection Jason Wang
2023-03-07 7:07 ` [PULL 19/51] net: Check L4 header size Jason Wang
2023-03-07 7:07 ` [PULL 20/51] e1000x: Alter the signature of e1000x_is_vlan_packet Jason Wang
2023-03-07 7:07 ` [PULL 21/51] net: Strip virtio-net header when dumping Jason Wang
2023-03-07 7:07 ` [PULL 22/51] hw/net/net_tx_pkt: Automatically determine if virtio-net header is used Jason Wang
2023-03-07 7:07 ` [PULL 23/51] hw/net/net_rx_pkt: Remove net_rx_pkt_has_virt_hdr Jason Wang
2023-03-07 7:07 ` [PULL 24/51] e1000e: Perform software segmentation for loopback Jason Wang
2023-03-07 7:07 ` [PULL 25/51] hw/net/net_tx_pkt: Implement TCP segmentation Jason Wang
2023-03-07 7:07 ` [PULL 26/51] hw/net/net_tx_pkt: Check the payload length Jason Wang
2023-03-07 7:07 ` [PULL 27/51] e1000e: Do not assert when MSI-X is disabled later Jason Wang
2023-03-07 7:07 ` [PULL 28/51] MAINTAINERS: Add Akihiko Odaki as a e1000e reviewer Jason Wang
2023-03-07 7:07 ` [PULL 29/51] MAINTAINERS: Add e1000e test files Jason Wang
2023-03-07 7:07 ` [PULL 30/51] e1000e: Combine rx traces Jason Wang
2023-03-07 7:07 ` [PULL 31/51] e1000: Count CRC in Tx statistics Jason Wang
2023-03-07 7:07 ` [PULL 32/51] e1000e: " Jason Wang
2023-03-07 7:07 ` [PULL 33/51] net/eth: Report if headers are actually present Jason Wang
2023-03-07 7:07 ` [PULL 34/51] e1000e: Implement system clock Jason Wang
2023-03-07 7:08 ` [PULL 35/51] net/eth: Introduce EthL4HdrProto Jason Wang
2023-03-07 7:08 ` [PULL 36/51] pcie: Introduce pcie_sriov_num_vfs Jason Wang
2023-03-07 7:08 ` [PULL 37/51] e1000: Split header files Jason Wang
2023-03-07 7:08 ` [PULL 38/51] Intrdocue igb device emulation Jason Wang
2023-03-07 7:08 ` [PULL 39/51] tests/qtest/e1000e-test: Fabricate ethernet header Jason Wang
2023-03-07 7:08 ` [PULL 40/51] tests/qtest/libqos/e1000e: Export macreg functions Jason Wang
2023-03-07 7:08 ` [PULL 41/51] igb: Introduce qtest for igb device Jason Wang
2023-03-07 7:08 ` [PULL 42/51] tests/avocado: Add igb test Jason Wang
2023-03-07 7:08 ` [PULL 43/51] docs/system/devices/igb: Add igb documentation Jason Wang
2023-03-07 7:08 ` [PULL 44/51] ebpf: fix compatibility with libbpf 1.0+ Jason Wang
2023-03-07 7:08 ` [PULL 45/51] hw/net/eepro100: Abort if pci_add_capability() ever fail Jason Wang
2023-03-07 7:08 ` [PULL 46/51] hw/net/eepro100: Introduce TYPE_EEPRO100 QOM abstract parent Jason Wang
2023-03-07 7:08 ` [PULL 47/51] hw/net/eepro100: Convert reset handler to DeviceReset Jason Wang
2023-03-07 7:08 ` [PULL 48/51] hw/net/eepro100: Pass E100PCIDeviceInfo as class init data Jason Wang
2023-03-07 7:08 ` [PULL 49/51] hw/net/eepro100: Remove instance EEPRO100State::has_extended_tcb_support Jason Wang
2023-03-07 7:08 ` [PULL 50/51] hw/net/eepro100: Remove instance's EEPRO100State::device Jason Wang
2023-03-07 7:08 ` [PULL 51/51] hw/net/eepro100: Replace DO_UPCAST(EEPRO100State) by EEPRO100() Jason Wang
2023-03-07 17:01 ` [PULL 00/51] Net patches Peter Maydell
2023-03-07 20:43 ` Philippe Mathieu-Daudé
2023-03-08 6:56 ` Jason Wang
2023-03-08 7:40 ` Philippe Mathieu-Daudé
2023-03-08 12:17 ` Michael S. Tsirkin
2023-03-08 12:21 ` Philippe Mathieu-Daudé
2023-03-08 12:25 ` Michael S. Tsirkin
2023-03-09 1:13 ` Jason Wang
2023-03-08 6:57 ` Jason Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230307070816.34833-10-jasowang@redhat.com \
--to=jasowang@redhat.com \
--cc=akihiko.odaki@daynix.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).