qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Jason Wang <jasowang@redhat.com>
To: qemu-devel@nongnu.org, peter.maydell@linaro.org
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>,
	Jason Wang <jasowang@redhat.com>
Subject: [PULL 12/51] e1000e: Remove pending interrupt flags
Date: Tue,  7 Mar 2023 15:07:37 +0800	[thread overview]
Message-ID: <20230307070816.34833-13-jasowang@redhat.com> (raw)
In-Reply-To: <20230307070816.34833-1-jasowang@redhat.com>

From: Akihiko Odaki <akihiko.odaki@daynix.com>

They are duplicate of running throttling timer flags and incomplete as
the flags are not cleared when the interrupts are fired or the device is
reset.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
 hw/net/e1000e.c      |  5 ++---
 hw/net/e1000e_core.c | 19 +++----------------
 hw/net/e1000e_core.h |  2 --
 hw/net/trace-events  |  2 --
 4 files changed, 5 insertions(+), 23 deletions(-)

diff --git a/hw/net/e1000e.c b/hw/net/e1000e.c
index d591d01..0bc222d 100644
--- a/hw/net/e1000e.c
+++ b/hw/net/e1000e.c
@@ -631,12 +631,11 @@ static const VMStateDescription e1000e_vmstate = {
         VMSTATE_E1000E_INTR_DELAY_TIMER(core.tidv, E1000EState),
 
         VMSTATE_E1000E_INTR_DELAY_TIMER(core.itr, E1000EState),
-        VMSTATE_BOOL(core.itr_intr_pending, E1000EState),
+        VMSTATE_UNUSED(1),
 
         VMSTATE_E1000E_INTR_DELAY_TIMER_ARRAY(core.eitr, E1000EState,
                                               E1000E_MSIX_VEC_NUM),
-        VMSTATE_BOOL_ARRAY(core.eitr_intr_pending, E1000EState,
-                           E1000E_MSIX_VEC_NUM),
+        VMSTATE_UNUSED(E1000E_MSIX_VEC_NUM),
 
         VMSTATE_UINT32(core.itr_guest_value, E1000EState),
         VMSTATE_UINT32_ARRAY(core.eitr_guest_value, E1000EState,
diff --git a/hw/net/e1000e_core.c b/hw/net/e1000e_core.c
index 87f964c..37aec6a 100644
--- a/hw/net/e1000e_core.c
+++ b/hw/net/e1000e_core.c
@@ -154,11 +154,6 @@ e1000e_intrmgr_on_throttling_timer(void *opaque)
 
     timer->running = false;
 
-    if (!timer->core->itr_intr_pending) {
-        trace_e1000e_irq_throttling_no_pending_interrupts();
-        return;
-    }
-
     if (msi_enabled(timer->core->owner)) {
         trace_e1000e_irq_msi_notify_postponed();
         /* Clear msi_causes_pending to fire MSI eventually */
@@ -180,11 +175,6 @@ e1000e_intrmgr_on_msix_throttling_timer(void *opaque)
 
     timer->running = false;
 
-    if (!timer->core->eitr_intr_pending[idx]) {
-        trace_e1000e_irq_throttling_no_pending_vec(idx);
-        return;
-    }
-
     trace_e1000e_irq_msix_notify_postponed_vec(idx);
     msix_notify(timer->core->owner, idx);
 }
@@ -2015,13 +2005,11 @@ e1000e_clear_ims_bits(E1000ECore *core, uint32_t bits)
 }
 
 static inline bool
-e1000e_postpone_interrupt(bool *interrupt_pending,
-                           E1000IntrDelayTimer *timer)
+e1000e_postpone_interrupt(E1000IntrDelayTimer *timer)
 {
     if (timer->running) {
         trace_e1000e_irq_postponed_by_xitr(timer->delay_reg << 2);
 
-        *interrupt_pending = true;
         return true;
     }
 
@@ -2035,14 +2023,13 @@ e1000e_postpone_interrupt(bool *interrupt_pending,
 static inline bool
 e1000e_itr_should_postpone(E1000ECore *core)
 {
-    return e1000e_postpone_interrupt(&core->itr_intr_pending, &core->itr);
+    return e1000e_postpone_interrupt(&core->itr);
 }
 
 static inline bool
 e1000e_eitr_should_postpone(E1000ECore *core, int idx)
 {
-    return e1000e_postpone_interrupt(&core->eitr_intr_pending[idx],
-                                     &core->eitr[idx]);
+    return e1000e_postpone_interrupt(&core->eitr[idx]);
 }
 
 static void
diff --git a/hw/net/e1000e_core.h b/hw/net/e1000e_core.h
index b8f38c4..d0a14b4 100644
--- a/hw/net/e1000e_core.h
+++ b/hw/net/e1000e_core.h
@@ -95,10 +95,8 @@ struct E1000Core {
     E1000IntrDelayTimer tidv;
 
     E1000IntrDelayTimer itr;
-    bool itr_intr_pending;
 
     E1000IntrDelayTimer eitr[E1000E_MSIX_VEC_NUM];
-    bool eitr_intr_pending[E1000E_MSIX_VEC_NUM];
 
     VMChangeStateEntry *vmstate;
 
diff --git a/hw/net/trace-events b/hw/net/trace-events
index 4c0ec3f..8fa4299 100644
--- a/hw/net/trace-events
+++ b/hw/net/trace-events
@@ -201,10 +201,8 @@ e1000e_rx_metadata_ipv6_filtering_disabled(void) "IPv6 RX filtering disabled by
 e1000e_vlan_vet(uint16_t vet) "Setting VLAN ethernet type 0x%X"
 
 e1000e_irq_msi_notify(uint32_t cause) "MSI notify 0x%x"
-e1000e_irq_throttling_no_pending_interrupts(void) "No pending interrupts to notify"
 e1000e_irq_msi_notify_postponed(void) "Sending MSI postponed by ITR"
 e1000e_irq_legacy_notify_postponed(void) "Raising legacy IRQ postponed by ITR"
-e1000e_irq_throttling_no_pending_vec(int idx) "No pending interrupts for vector %d"
 e1000e_irq_msix_notify_postponed_vec(int idx) "Sending MSI-X postponed by EITR[%d]"
 e1000e_irq_legacy_notify(bool level) "IRQ line state: %d"
 e1000e_irq_msix_notify_vec(uint32_t vector) "MSI-X notify vector 0x%x"
-- 
2.7.4



  parent reply	other threads:[~2023-03-07  7:14 UTC|newest]

Thread overview: 61+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-07  7:07 [PULL 00/51] Net patches Jason Wang
2023-03-07  7:07 ` [PULL 01/51] e1000e: Fix the code style Jason Wang
2023-03-07  7:07 ` [PULL 02/51] hw/net: Add more MII definitions Jason Wang
2023-03-07  7:07 ` [PULL 03/51] fsl_etsec: Use hw/net/mii.h Jason Wang
2023-03-07  7:07 ` [PULL 04/51] e1000: " Jason Wang
2023-03-07  7:07 ` [PULL 05/51] e1000: Mask registers when writing Jason Wang
2023-03-07  7:07 ` [PULL 06/51] e1000e: Introduce E1000E_LOW_BITS_SET_FUNC Jason Wang
2023-03-07  7:07 ` [PULL 07/51] e1000e: Mask registers when writing Jason Wang
2023-03-07  7:07 ` [PULL 08/51] e1000: Use more constant definitions Jason Wang
2023-03-07  7:07 ` [PULL 09/51] e1000e: " Jason Wang
2023-03-07  7:07 ` [PULL 10/51] e1000: Use memcpy to intialize registers Jason Wang
2023-03-07  7:07 ` [PULL 11/51] e1000e: " Jason Wang
2023-03-07  7:07 ` Jason Wang [this message]
2023-03-07  7:07 ` [PULL 13/51] e1000e: Improve software reset Jason Wang
2023-03-07  7:07 ` [PULL 14/51] e1000: Configure ResettableClass Jason Wang
2023-03-07  7:07 ` [PULL 15/51] e1000e: " Jason Wang
2023-03-07  7:07 ` [PULL 16/51] e1000e: Introduce e1000_rx_desc_union Jason Wang
2023-03-07  7:07 ` [PULL 17/51] e1000e: Set MII_ANER_NWAY Jason Wang
2023-03-07  7:07 ` [PULL 18/51] e1000e: Remove extra pointer indirection Jason Wang
2023-03-07  7:07 ` [PULL 19/51] net: Check L4 header size Jason Wang
2023-03-07  7:07 ` [PULL 20/51] e1000x: Alter the signature of e1000x_is_vlan_packet Jason Wang
2023-03-07  7:07 ` [PULL 21/51] net: Strip virtio-net header when dumping Jason Wang
2023-03-07  7:07 ` [PULL 22/51] hw/net/net_tx_pkt: Automatically determine if virtio-net header is used Jason Wang
2023-03-07  7:07 ` [PULL 23/51] hw/net/net_rx_pkt: Remove net_rx_pkt_has_virt_hdr Jason Wang
2023-03-07  7:07 ` [PULL 24/51] e1000e: Perform software segmentation for loopback Jason Wang
2023-03-07  7:07 ` [PULL 25/51] hw/net/net_tx_pkt: Implement TCP segmentation Jason Wang
2023-03-07  7:07 ` [PULL 26/51] hw/net/net_tx_pkt: Check the payload length Jason Wang
2023-03-07  7:07 ` [PULL 27/51] e1000e: Do not assert when MSI-X is disabled later Jason Wang
2023-03-07  7:07 ` [PULL 28/51] MAINTAINERS: Add Akihiko Odaki as a e1000e reviewer Jason Wang
2023-03-07  7:07 ` [PULL 29/51] MAINTAINERS: Add e1000e test files Jason Wang
2023-03-07  7:07 ` [PULL 30/51] e1000e: Combine rx traces Jason Wang
2023-03-07  7:07 ` [PULL 31/51] e1000: Count CRC in Tx statistics Jason Wang
2023-03-07  7:07 ` [PULL 32/51] e1000e: " Jason Wang
2023-03-07  7:07 ` [PULL 33/51] net/eth: Report if headers are actually present Jason Wang
2023-03-07  7:07 ` [PULL 34/51] e1000e: Implement system clock Jason Wang
2023-03-07  7:08 ` [PULL 35/51] net/eth: Introduce EthL4HdrProto Jason Wang
2023-03-07  7:08 ` [PULL 36/51] pcie: Introduce pcie_sriov_num_vfs Jason Wang
2023-03-07  7:08 ` [PULL 37/51] e1000: Split header files Jason Wang
2023-03-07  7:08 ` [PULL 38/51] Intrdocue igb device emulation Jason Wang
2023-03-07  7:08 ` [PULL 39/51] tests/qtest/e1000e-test: Fabricate ethernet header Jason Wang
2023-03-07  7:08 ` [PULL 40/51] tests/qtest/libqos/e1000e: Export macreg functions Jason Wang
2023-03-07  7:08 ` [PULL 41/51] igb: Introduce qtest for igb device Jason Wang
2023-03-07  7:08 ` [PULL 42/51] tests/avocado: Add igb test Jason Wang
2023-03-07  7:08 ` [PULL 43/51] docs/system/devices/igb: Add igb documentation Jason Wang
2023-03-07  7:08 ` [PULL 44/51] ebpf: fix compatibility with libbpf 1.0+ Jason Wang
2023-03-07  7:08 ` [PULL 45/51] hw/net/eepro100: Abort if pci_add_capability() ever fail Jason Wang
2023-03-07  7:08 ` [PULL 46/51] hw/net/eepro100: Introduce TYPE_EEPRO100 QOM abstract parent Jason Wang
2023-03-07  7:08 ` [PULL 47/51] hw/net/eepro100: Convert reset handler to DeviceReset Jason Wang
2023-03-07  7:08 ` [PULL 48/51] hw/net/eepro100: Pass E100PCIDeviceInfo as class init data Jason Wang
2023-03-07  7:08 ` [PULL 49/51] hw/net/eepro100: Remove instance EEPRO100State::has_extended_tcb_support Jason Wang
2023-03-07  7:08 ` [PULL 50/51] hw/net/eepro100: Remove instance's EEPRO100State::device Jason Wang
2023-03-07  7:08 ` [PULL 51/51] hw/net/eepro100: Replace DO_UPCAST(EEPRO100State) by EEPRO100() Jason Wang
2023-03-07 17:01 ` [PULL 00/51] Net patches Peter Maydell
2023-03-07 20:43   ` Philippe Mathieu-Daudé
2023-03-08  6:56     ` Jason Wang
2023-03-08  7:40       ` Philippe Mathieu-Daudé
2023-03-08 12:17         ` Michael S. Tsirkin
2023-03-08 12:21           ` Philippe Mathieu-Daudé
2023-03-08 12:25             ` Michael S. Tsirkin
2023-03-09  1:13               ` Jason Wang
2023-03-08  6:57   ` Jason Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230307070816.34833-13-jasowang@redhat.com \
    --to=jasowang@redhat.com \
    --cc=akihiko.odaki@daynix.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).