From: Jason Wang <jasowang@redhat.com>
To: qemu-devel@nongnu.org, peter.maydell@linaro.org
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>,
Jason Wang <jasowang@redhat.com>
Subject: [PULL 22/51] hw/net/net_tx_pkt: Automatically determine if virtio-net header is used
Date: Tue, 7 Mar 2023 15:07:47 +0800 [thread overview]
Message-ID: <20230307070816.34833-23-jasowang@redhat.com> (raw)
In-Reply-To: <20230307070816.34833-1-jasowang@redhat.com>
From: Akihiko Odaki <akihiko.odaki@daynix.com>
The new function qemu_get_using_vnet_hdr() allows to automatically
determine if virtio-net header is used.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
hw/net/e1000e_core.c | 3 +--
hw/net/net_tx_pkt.c | 19 ++++++++++---------
hw/net/net_tx_pkt.h | 3 +--
hw/net/vmxnet3.c | 6 ++----
4 files changed, 14 insertions(+), 17 deletions(-)
diff --git a/hw/net/e1000e_core.c b/hw/net/e1000e_core.c
index 38d374f..954a007 100644
--- a/hw/net/e1000e_core.c
+++ b/hw/net/e1000e_core.c
@@ -3376,8 +3376,7 @@ e1000e_core_pci_realize(E1000ECore *core,
qemu_add_vm_change_state_handler(e1000e_vm_state_change, core);
for (i = 0; i < E1000E_NUM_QUEUES; i++) {
- net_tx_pkt_init(&core->tx[i].tx_pkt, core->owner,
- E1000E_MAX_TX_FRAGS, core->has_vnet);
+ net_tx_pkt_init(&core->tx[i].tx_pkt, core->owner, E1000E_MAX_TX_FRAGS);
}
net_rx_pkt_init(&core->rx_pkt, core->has_vnet);
diff --git a/hw/net/net_tx_pkt.c b/hw/net/net_tx_pkt.c
index 8a23899..cf46c84 100644
--- a/hw/net/net_tx_pkt.c
+++ b/hw/net/net_tx_pkt.c
@@ -35,7 +35,6 @@ struct NetTxPkt {
PCIDevice *pci_dev;
struct virtio_net_hdr virt_hdr;
- bool has_virt_hdr;
struct iovec *raw;
uint32_t raw_frags;
@@ -59,7 +58,7 @@ struct NetTxPkt {
};
void net_tx_pkt_init(struct NetTxPkt **pkt, PCIDevice *pci_dev,
- uint32_t max_frags, bool has_virt_hdr)
+ uint32_t max_frags)
{
struct NetTxPkt *p = g_malloc0(sizeof *p);
@@ -71,10 +70,8 @@ void net_tx_pkt_init(struct NetTxPkt **pkt, PCIDevice *pci_dev,
p->max_payload_frags = max_frags;
p->max_raw_frags = max_frags;
- p->has_virt_hdr = has_virt_hdr;
p->vec[NET_TX_PKT_VHDR_FRAG].iov_base = &p->virt_hdr;
- p->vec[NET_TX_PKT_VHDR_FRAG].iov_len =
- p->has_virt_hdr ? sizeof p->virt_hdr : 0;
+ p->vec[NET_TX_PKT_VHDR_FRAG].iov_len = sizeof p->virt_hdr;
p->vec[NET_TX_PKT_L2HDR_FRAG].iov_base = &p->l2_hdr;
p->vec[NET_TX_PKT_L3HDR_FRAG].iov_base = &p->l3_hdr;
@@ -617,9 +614,11 @@ static bool net_tx_pkt_do_sw_fragmentation(struct NetTxPkt *pkt,
bool net_tx_pkt_send(struct NetTxPkt *pkt, NetClientState *nc)
{
+ bool using_vnet_hdr = qemu_get_using_vnet_hdr(nc->peer);
+
assert(pkt);
- if (!pkt->has_virt_hdr &&
+ if (!using_vnet_hdr &&
pkt->virt_hdr.flags & VIRTIO_NET_HDR_F_NEEDS_CSUM) {
net_tx_pkt_do_sw_csum(pkt);
}
@@ -636,11 +635,13 @@ bool net_tx_pkt_send(struct NetTxPkt *pkt, NetClientState *nc)
}
}
- if (pkt->has_virt_hdr ||
+ if (using_vnet_hdr ||
pkt->virt_hdr.gso_type == VIRTIO_NET_HDR_GSO_NONE) {
+ int index = using_vnet_hdr ?
+ NET_TX_PKT_VHDR_FRAG : NET_TX_PKT_L2HDR_FRAG;
net_tx_pkt_fix_ip6_payload_len(pkt);
- net_tx_pkt_sendv(pkt, nc, pkt->vec,
- pkt->payload_frags + NET_TX_PKT_PL_START_FRAG);
+ net_tx_pkt_sendv(pkt, nc, pkt->vec + index,
+ pkt->payload_frags + NET_TX_PKT_PL_START_FRAG - index);
return true;
}
diff --git a/hw/net/net_tx_pkt.h b/hw/net/net_tx_pkt.h
index 2e38a5f..8d3faa4 100644
--- a/hw/net/net_tx_pkt.h
+++ b/hw/net/net_tx_pkt.h
@@ -32,10 +32,9 @@ struct NetTxPkt;
* @pkt: packet pointer
* @pci_dev: PCI device processing this packet
* @max_frags: max tx ip fragments
- * @has_virt_hdr: device uses virtio header.
*/
void net_tx_pkt_init(struct NetTxPkt **pkt, PCIDevice *pci_dev,
- uint32_t max_frags, bool has_virt_hdr);
+ uint32_t max_frags);
/**
* Clean all tx packet resources.
diff --git a/hw/net/vmxnet3.c b/hw/net/vmxnet3.c
index d7d492a..eab8fa4 100644
--- a/hw/net/vmxnet3.c
+++ b/hw/net/vmxnet3.c
@@ -1521,8 +1521,7 @@ static void vmxnet3_activate_device(VMXNET3State *s)
/* Preallocate TX packet wrapper */
VMW_CFPRN("Max TX fragments is %u", s->max_tx_frags);
- net_tx_pkt_init(&s->tx_pkt, PCI_DEVICE(s),
- s->max_tx_frags, s->peer_has_vhdr);
+ net_tx_pkt_init(&s->tx_pkt, PCI_DEVICE(s), s->max_tx_frags);
net_rx_pkt_init(&s->rx_pkt, s->peer_has_vhdr);
/* Read rings memory locations for RX queues */
@@ -2402,8 +2401,7 @@ static int vmxnet3_post_load(void *opaque, int version_id)
{
VMXNET3State *s = opaque;
- net_tx_pkt_init(&s->tx_pkt, PCI_DEVICE(s),
- s->max_tx_frags, s->peer_has_vhdr);
+ net_tx_pkt_init(&s->tx_pkt, PCI_DEVICE(s), s->max_tx_frags);
net_rx_pkt_init(&s->rx_pkt, s->peer_has_vhdr);
if (s->msix_used) {
--
2.7.4
next prev parent reply other threads:[~2023-03-07 7:12 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-07 7:07 [PULL 00/51] Net patches Jason Wang
2023-03-07 7:07 ` [PULL 01/51] e1000e: Fix the code style Jason Wang
2023-03-07 7:07 ` [PULL 02/51] hw/net: Add more MII definitions Jason Wang
2023-03-07 7:07 ` [PULL 03/51] fsl_etsec: Use hw/net/mii.h Jason Wang
2023-03-07 7:07 ` [PULL 04/51] e1000: " Jason Wang
2023-03-07 7:07 ` [PULL 05/51] e1000: Mask registers when writing Jason Wang
2023-03-07 7:07 ` [PULL 06/51] e1000e: Introduce E1000E_LOW_BITS_SET_FUNC Jason Wang
2023-03-07 7:07 ` [PULL 07/51] e1000e: Mask registers when writing Jason Wang
2023-03-07 7:07 ` [PULL 08/51] e1000: Use more constant definitions Jason Wang
2023-03-07 7:07 ` [PULL 09/51] e1000e: " Jason Wang
2023-03-07 7:07 ` [PULL 10/51] e1000: Use memcpy to intialize registers Jason Wang
2023-03-07 7:07 ` [PULL 11/51] e1000e: " Jason Wang
2023-03-07 7:07 ` [PULL 12/51] e1000e: Remove pending interrupt flags Jason Wang
2023-03-07 7:07 ` [PULL 13/51] e1000e: Improve software reset Jason Wang
2023-03-07 7:07 ` [PULL 14/51] e1000: Configure ResettableClass Jason Wang
2023-03-07 7:07 ` [PULL 15/51] e1000e: " Jason Wang
2023-03-07 7:07 ` [PULL 16/51] e1000e: Introduce e1000_rx_desc_union Jason Wang
2023-03-07 7:07 ` [PULL 17/51] e1000e: Set MII_ANER_NWAY Jason Wang
2023-03-07 7:07 ` [PULL 18/51] e1000e: Remove extra pointer indirection Jason Wang
2023-03-07 7:07 ` [PULL 19/51] net: Check L4 header size Jason Wang
2023-03-07 7:07 ` [PULL 20/51] e1000x: Alter the signature of e1000x_is_vlan_packet Jason Wang
2023-03-07 7:07 ` [PULL 21/51] net: Strip virtio-net header when dumping Jason Wang
2023-03-07 7:07 ` Jason Wang [this message]
2023-03-07 7:07 ` [PULL 23/51] hw/net/net_rx_pkt: Remove net_rx_pkt_has_virt_hdr Jason Wang
2023-03-07 7:07 ` [PULL 24/51] e1000e: Perform software segmentation for loopback Jason Wang
2023-03-07 7:07 ` [PULL 25/51] hw/net/net_tx_pkt: Implement TCP segmentation Jason Wang
2023-03-07 7:07 ` [PULL 26/51] hw/net/net_tx_pkt: Check the payload length Jason Wang
2023-03-07 7:07 ` [PULL 27/51] e1000e: Do not assert when MSI-X is disabled later Jason Wang
2023-03-07 7:07 ` [PULL 28/51] MAINTAINERS: Add Akihiko Odaki as a e1000e reviewer Jason Wang
2023-03-07 7:07 ` [PULL 29/51] MAINTAINERS: Add e1000e test files Jason Wang
2023-03-07 7:07 ` [PULL 30/51] e1000e: Combine rx traces Jason Wang
2023-03-07 7:07 ` [PULL 31/51] e1000: Count CRC in Tx statistics Jason Wang
2023-03-07 7:07 ` [PULL 32/51] e1000e: " Jason Wang
2023-03-07 7:07 ` [PULL 33/51] net/eth: Report if headers are actually present Jason Wang
2023-03-07 7:07 ` [PULL 34/51] e1000e: Implement system clock Jason Wang
2023-03-07 7:08 ` [PULL 35/51] net/eth: Introduce EthL4HdrProto Jason Wang
2023-03-07 7:08 ` [PULL 36/51] pcie: Introduce pcie_sriov_num_vfs Jason Wang
2023-03-07 7:08 ` [PULL 37/51] e1000: Split header files Jason Wang
2023-03-07 7:08 ` [PULL 38/51] Intrdocue igb device emulation Jason Wang
2023-03-07 7:08 ` [PULL 39/51] tests/qtest/e1000e-test: Fabricate ethernet header Jason Wang
2023-03-07 7:08 ` [PULL 40/51] tests/qtest/libqos/e1000e: Export macreg functions Jason Wang
2023-03-07 7:08 ` [PULL 41/51] igb: Introduce qtest for igb device Jason Wang
2023-03-07 7:08 ` [PULL 42/51] tests/avocado: Add igb test Jason Wang
2023-03-07 7:08 ` [PULL 43/51] docs/system/devices/igb: Add igb documentation Jason Wang
2023-03-07 7:08 ` [PULL 44/51] ebpf: fix compatibility with libbpf 1.0+ Jason Wang
2023-03-07 7:08 ` [PULL 45/51] hw/net/eepro100: Abort if pci_add_capability() ever fail Jason Wang
2023-03-07 7:08 ` [PULL 46/51] hw/net/eepro100: Introduce TYPE_EEPRO100 QOM abstract parent Jason Wang
2023-03-07 7:08 ` [PULL 47/51] hw/net/eepro100: Convert reset handler to DeviceReset Jason Wang
2023-03-07 7:08 ` [PULL 48/51] hw/net/eepro100: Pass E100PCIDeviceInfo as class init data Jason Wang
2023-03-07 7:08 ` [PULL 49/51] hw/net/eepro100: Remove instance EEPRO100State::has_extended_tcb_support Jason Wang
2023-03-07 7:08 ` [PULL 50/51] hw/net/eepro100: Remove instance's EEPRO100State::device Jason Wang
2023-03-07 7:08 ` [PULL 51/51] hw/net/eepro100: Replace DO_UPCAST(EEPRO100State) by EEPRO100() Jason Wang
2023-03-07 17:01 ` [PULL 00/51] Net patches Peter Maydell
2023-03-07 20:43 ` Philippe Mathieu-Daudé
2023-03-08 6:56 ` Jason Wang
2023-03-08 7:40 ` Philippe Mathieu-Daudé
2023-03-08 12:17 ` Michael S. Tsirkin
2023-03-08 12:21 ` Philippe Mathieu-Daudé
2023-03-08 12:25 ` Michael S. Tsirkin
2023-03-09 1:13 ` Jason Wang
2023-03-08 6:57 ` Jason Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230307070816.34833-23-jasowang@redhat.com \
--to=jasowang@redhat.com \
--cc=akihiko.odaki@daynix.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).