From: Jason Wang <jasowang@redhat.com>
To: qemu-devel@nongnu.org, peter.maydell@linaro.org
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>,
Thomas Huth <thuth@redhat.com>, Jason Wang <jasowang@redhat.com>
Subject: [PULL 39/51] tests/qtest/e1000e-test: Fabricate ethernet header
Date: Tue, 7 Mar 2023 15:08:04 +0800 [thread overview]
Message-ID: <20230307070816.34833-40-jasowang@redhat.com> (raw)
In-Reply-To: <20230307070816.34833-1-jasowang@redhat.com>
From: Akihiko Odaki <akihiko.odaki@daynix.com>
e1000e understands ethernet header so fabricate something convincing.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
tests/qtest/e1000e-test.c | 25 +++++++++++++++----------
tests/qtest/libqos/e1000e.h | 2 ++
2 files changed, 17 insertions(+), 10 deletions(-)
diff --git a/tests/qtest/e1000e-test.c b/tests/qtest/e1000e-test.c
index b63a4d3..de9738f 100644
--- a/tests/qtest/e1000e-test.c
+++ b/tests/qtest/e1000e-test.c
@@ -27,6 +27,7 @@
#include "qemu/osdep.h"
#include "libqtest-single.h"
#include "libqos/pci-pc.h"
+#include "net/eth.h"
#include "qemu/sockets.h"
#include "qemu/iov.h"
#include "qemu/module.h"
@@ -35,9 +36,13 @@
#include "libqos/e1000e.h"
#include "hw/net/e1000_regs.h"
+static const struct eth_header packet = {
+ .h_dest = E1000E_ADDRESS,
+ .h_source = E1000E_ADDRESS,
+};
+
static void e1000e_send_verify(QE1000E *d, int *test_sockets, QGuestAllocator *alloc)
{
- static const char test[] = "TEST";
struct e1000_tx_desc descr;
char buffer[64];
int ret;
@@ -45,7 +50,7 @@ static void e1000e_send_verify(QE1000E *d, int *test_sockets, QGuestAllocator *a
/* Prepare test data buffer */
uint64_t data = guest_alloc(alloc, sizeof(buffer));
- memwrite(data, test, sizeof(test));
+ memwrite(data, &packet, sizeof(packet));
/* Prepare TX descriptor */
memset(&descr, 0, sizeof(descr));
@@ -71,7 +76,7 @@ static void e1000e_send_verify(QE1000E *d, int *test_sockets, QGuestAllocator *a
g_assert_cmpint(ret, == , sizeof(recv_len));
ret = recv(test_sockets[0], buffer, sizeof(buffer), 0);
g_assert_cmpint(ret, ==, sizeof(buffer));
- g_assert_cmpstr(buffer, == , test);
+ g_assert_false(memcmp(buffer, &packet, sizeof(packet)));
/* Free test data buffer */
guest_free(alloc, data);
@@ -81,15 +86,15 @@ static void e1000e_receive_verify(QE1000E *d, int *test_sockets, QGuestAllocator
{
union e1000_rx_desc_extended descr;
- char test[] = "TEST";
- int len = htonl(sizeof(test));
+ struct eth_header test_iov = packet;
+ int len = htonl(sizeof(packet));
struct iovec iov[] = {
{
.iov_base = &len,
.iov_len = sizeof(len),
},{
- .iov_base = test,
- .iov_len = sizeof(test),
+ .iov_base = &test_iov,
+ .iov_len = sizeof(packet),
},
};
@@ -97,8 +102,8 @@ static void e1000e_receive_verify(QE1000E *d, int *test_sockets, QGuestAllocator
int ret;
/* Send a dummy packet to device's socket*/
- ret = iov_send(test_sockets[0], iov, 2, 0, sizeof(len) + sizeof(test));
- g_assert_cmpint(ret, == , sizeof(test) + sizeof(len));
+ ret = iov_send(test_sockets[0], iov, 2, 0, sizeof(len) + sizeof(packet));
+ g_assert_cmpint(ret, == , sizeof(packet) + sizeof(len));
/* Prepare test data buffer */
uint64_t data = guest_alloc(alloc, sizeof(buffer));
@@ -119,7 +124,7 @@ static void e1000e_receive_verify(QE1000E *d, int *test_sockets, QGuestAllocator
/* Check data sent to the backend */
memread(data, buffer, sizeof(buffer));
- g_assert_cmpstr(buffer, == , test);
+ g_assert_false(memcmp(buffer, &packet, sizeof(packet)));
/* Free test data buffer */
guest_free(alloc, data);
diff --git a/tests/qtest/libqos/e1000e.h b/tests/qtest/libqos/e1000e.h
index 091ce13..5e2b201 100644
--- a/tests/qtest/libqos/e1000e.h
+++ b/tests/qtest/libqos/e1000e.h
@@ -25,6 +25,8 @@
#define E1000E_RX0_MSG_ID (0)
#define E1000E_TX0_MSG_ID (1)
+#define E1000E_ADDRESS { 0x52, 0x54, 0x00, 0x12, 0x34, 0x56 }
+
typedef struct QE1000E QE1000E;
typedef struct QE1000E_PCI QE1000E_PCI;
--
2.7.4
next prev parent reply other threads:[~2023-03-07 7:12 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-07 7:07 [PULL 00/51] Net patches Jason Wang
2023-03-07 7:07 ` [PULL 01/51] e1000e: Fix the code style Jason Wang
2023-03-07 7:07 ` [PULL 02/51] hw/net: Add more MII definitions Jason Wang
2023-03-07 7:07 ` [PULL 03/51] fsl_etsec: Use hw/net/mii.h Jason Wang
2023-03-07 7:07 ` [PULL 04/51] e1000: " Jason Wang
2023-03-07 7:07 ` [PULL 05/51] e1000: Mask registers when writing Jason Wang
2023-03-07 7:07 ` [PULL 06/51] e1000e: Introduce E1000E_LOW_BITS_SET_FUNC Jason Wang
2023-03-07 7:07 ` [PULL 07/51] e1000e: Mask registers when writing Jason Wang
2023-03-07 7:07 ` [PULL 08/51] e1000: Use more constant definitions Jason Wang
2023-03-07 7:07 ` [PULL 09/51] e1000e: " Jason Wang
2023-03-07 7:07 ` [PULL 10/51] e1000: Use memcpy to intialize registers Jason Wang
2023-03-07 7:07 ` [PULL 11/51] e1000e: " Jason Wang
2023-03-07 7:07 ` [PULL 12/51] e1000e: Remove pending interrupt flags Jason Wang
2023-03-07 7:07 ` [PULL 13/51] e1000e: Improve software reset Jason Wang
2023-03-07 7:07 ` [PULL 14/51] e1000: Configure ResettableClass Jason Wang
2023-03-07 7:07 ` [PULL 15/51] e1000e: " Jason Wang
2023-03-07 7:07 ` [PULL 16/51] e1000e: Introduce e1000_rx_desc_union Jason Wang
2023-03-07 7:07 ` [PULL 17/51] e1000e: Set MII_ANER_NWAY Jason Wang
2023-03-07 7:07 ` [PULL 18/51] e1000e: Remove extra pointer indirection Jason Wang
2023-03-07 7:07 ` [PULL 19/51] net: Check L4 header size Jason Wang
2023-03-07 7:07 ` [PULL 20/51] e1000x: Alter the signature of e1000x_is_vlan_packet Jason Wang
2023-03-07 7:07 ` [PULL 21/51] net: Strip virtio-net header when dumping Jason Wang
2023-03-07 7:07 ` [PULL 22/51] hw/net/net_tx_pkt: Automatically determine if virtio-net header is used Jason Wang
2023-03-07 7:07 ` [PULL 23/51] hw/net/net_rx_pkt: Remove net_rx_pkt_has_virt_hdr Jason Wang
2023-03-07 7:07 ` [PULL 24/51] e1000e: Perform software segmentation for loopback Jason Wang
2023-03-07 7:07 ` [PULL 25/51] hw/net/net_tx_pkt: Implement TCP segmentation Jason Wang
2023-03-07 7:07 ` [PULL 26/51] hw/net/net_tx_pkt: Check the payload length Jason Wang
2023-03-07 7:07 ` [PULL 27/51] e1000e: Do not assert when MSI-X is disabled later Jason Wang
2023-03-07 7:07 ` [PULL 28/51] MAINTAINERS: Add Akihiko Odaki as a e1000e reviewer Jason Wang
2023-03-07 7:07 ` [PULL 29/51] MAINTAINERS: Add e1000e test files Jason Wang
2023-03-07 7:07 ` [PULL 30/51] e1000e: Combine rx traces Jason Wang
2023-03-07 7:07 ` [PULL 31/51] e1000: Count CRC in Tx statistics Jason Wang
2023-03-07 7:07 ` [PULL 32/51] e1000e: " Jason Wang
2023-03-07 7:07 ` [PULL 33/51] net/eth: Report if headers are actually present Jason Wang
2023-03-07 7:07 ` [PULL 34/51] e1000e: Implement system clock Jason Wang
2023-03-07 7:08 ` [PULL 35/51] net/eth: Introduce EthL4HdrProto Jason Wang
2023-03-07 7:08 ` [PULL 36/51] pcie: Introduce pcie_sriov_num_vfs Jason Wang
2023-03-07 7:08 ` [PULL 37/51] e1000: Split header files Jason Wang
2023-03-07 7:08 ` [PULL 38/51] Intrdocue igb device emulation Jason Wang
2023-03-07 7:08 ` Jason Wang [this message]
2023-03-07 7:08 ` [PULL 40/51] tests/qtest/libqos/e1000e: Export macreg functions Jason Wang
2023-03-07 7:08 ` [PULL 41/51] igb: Introduce qtest for igb device Jason Wang
2023-03-07 7:08 ` [PULL 42/51] tests/avocado: Add igb test Jason Wang
2023-03-07 7:08 ` [PULL 43/51] docs/system/devices/igb: Add igb documentation Jason Wang
2023-03-07 7:08 ` [PULL 44/51] ebpf: fix compatibility with libbpf 1.0+ Jason Wang
2023-03-07 7:08 ` [PULL 45/51] hw/net/eepro100: Abort if pci_add_capability() ever fail Jason Wang
2023-03-07 7:08 ` [PULL 46/51] hw/net/eepro100: Introduce TYPE_EEPRO100 QOM abstract parent Jason Wang
2023-03-07 7:08 ` [PULL 47/51] hw/net/eepro100: Convert reset handler to DeviceReset Jason Wang
2023-03-07 7:08 ` [PULL 48/51] hw/net/eepro100: Pass E100PCIDeviceInfo as class init data Jason Wang
2023-03-07 7:08 ` [PULL 49/51] hw/net/eepro100: Remove instance EEPRO100State::has_extended_tcb_support Jason Wang
2023-03-07 7:08 ` [PULL 50/51] hw/net/eepro100: Remove instance's EEPRO100State::device Jason Wang
2023-03-07 7:08 ` [PULL 51/51] hw/net/eepro100: Replace DO_UPCAST(EEPRO100State) by EEPRO100() Jason Wang
2023-03-07 17:01 ` [PULL 00/51] Net patches Peter Maydell
2023-03-07 20:43 ` Philippe Mathieu-Daudé
2023-03-08 6:56 ` Jason Wang
2023-03-08 7:40 ` Philippe Mathieu-Daudé
2023-03-08 12:17 ` Michael S. Tsirkin
2023-03-08 12:21 ` Philippe Mathieu-Daudé
2023-03-08 12:25 ` Michael S. Tsirkin
2023-03-09 1:13 ` Jason Wang
2023-03-08 6:57 ` Jason Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230307070816.34833-40-jasowang@redhat.com \
--to=jasowang@redhat.com \
--cc=akihiko.odaki@daynix.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).