From: "Philippe Mathieu-Daudé" <philmd@linaro.org>
To: qemu-devel@nongnu.org
Cc: qemu-ppc@nongnu.org, "BALATON Zoltan" <balaton@eik.bme.hu>,
"Rene Engel" <ReneEngel80@emailn.de>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>
Subject: [PULL 11/20] hw/display/sm501: Add debug property to control pixman usage
Date: Wed, 8 Mar 2023 00:47:02 +0100 [thread overview]
Message-ID: <20230307234711.55375-12-philmd@linaro.org> (raw)
In-Reply-To: <20230307234711.55375-1-philmd@linaro.org>
From: BALATON Zoltan <balaton@eik.bme.hu>
Add a property to allow disabling pixman and always use the fallbacks
for different operations which is useful for testing different drawing
methods or debugging pixman related issues.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Message-Id: <61768ffaefa71b65a657d1365823bd43c7ee9354.1678188711.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
hw/display/sm501.c | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)
diff --git a/hw/display/sm501.c b/hw/display/sm501.c
index 17835159fc..dbabbc4339 100644
--- a/hw/display/sm501.c
+++ b/hw/display/sm501.c
@@ -465,6 +465,7 @@ typedef struct SM501State {
uint32_t last_width;
uint32_t last_height;
bool do_full_update; /* perform a full update next time */
+ uint8_t use_pixman;
I2CBus *i2c_bus;
/* mmio registers */
@@ -827,7 +828,7 @@ static void sm501_2d_operation(SM501State *s)
de = db + (width + (height - 1) * dst_pitch) * bypp;
overlap = (db < se && sb < de);
}
- if (overlap) {
+ if (overlap && (s->use_pixman & BIT(2))) {
/* pixman can't do reverse blit: copy via temporary */
int tmp_stride = DIV_ROUND_UP(width * bypp, sizeof(uint32_t));
uint32_t *tmp = tmp_buf;
@@ -852,13 +853,15 @@ static void sm501_2d_operation(SM501State *s)
if (tmp != tmp_buf) {
g_free(tmp);
}
- } else {
+ } else if (!overlap && (s->use_pixman & BIT(1))) {
fallback = !pixman_blt((uint32_t *)&s->local_mem[src_base],
(uint32_t *)&s->local_mem[dst_base],
src_pitch * bypp / sizeof(uint32_t),
dst_pitch * bypp / sizeof(uint32_t),
8 * bypp, 8 * bypp, src_x, src_y,
dst_x, dst_y, width, height);
+ } else {
+ fallback = true;
}
if (fallback) {
uint8_t *sp = s->local_mem + src_base;
@@ -891,7 +894,7 @@ static void sm501_2d_operation(SM501State *s)
color = cpu_to_le16(color);
}
- if ((width == 1 && height == 1) ||
+ if (!(s->use_pixman & BIT(0)) || (width == 1 && height == 1) ||
!pixman_fill((uint32_t *)&s->local_mem[dst_base],
dst_pitch * bypp / sizeof(uint32_t), 8 * bypp,
dst_x, dst_y, width, height, color)) {
@@ -2035,6 +2038,7 @@ static void sm501_realize_sysbus(DeviceState *dev, Error **errp)
static Property sm501_sysbus_properties[] = {
DEFINE_PROP_UINT32("vram-size", SM501SysBusState, vram_size, 0),
+ DEFINE_PROP_UINT8("x-pixman", SM501SysBusState, state.use_pixman, 7),
DEFINE_PROP_END_OF_LIST(),
};
@@ -2122,6 +2126,7 @@ static void sm501_realize_pci(PCIDevice *dev, Error **errp)
static Property sm501_pci_properties[] = {
DEFINE_PROP_UINT32("vram-size", SM501PCIState, vram_size, 64 * MiB),
+ DEFINE_PROP_UINT8("x-pixman", SM501PCIState, state.use_pixman, 7),
DEFINE_PROP_END_OF_LIST(),
};
@@ -2162,11 +2167,18 @@ static void sm501_pci_class_init(ObjectClass *klass, void *data)
dc->vmsd = &vmstate_sm501_pci;
}
+static void sm501_pci_init(Object *o)
+{
+ object_property_set_description(o, "x-pixman", "Use pixman for: "
+ "1: fill, 2: blit, 4: overlap blit");
+}
+
static const TypeInfo sm501_pci_info = {
.name = TYPE_PCI_SM501,
.parent = TYPE_PCI_DEVICE,
.instance_size = sizeof(SM501PCIState),
.class_init = sm501_pci_class_init,
+ .instance_init = sm501_pci_init,
.interfaces = (InterfaceInfo[]) {
{ INTERFACE_CONVENTIONAL_PCI_DEVICE },
{ },
--
2.38.1
next prev parent reply other threads:[~2023-03-07 23:49 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-07 23:46 [PULL 00/20] MIPS patches for 2023-03-07 Philippe Mathieu-Daudé
2023-03-07 23:46 ` [PULL 01/20] docs/system: Remove "mips" board from target-mips.rst Philippe Mathieu-Daudé
2023-03-07 23:46 ` [PULL 02/20] target/mips: Replace [g_]assert(0) -> g_assert_not_reached() Philippe Mathieu-Daudé
2023-03-07 23:46 ` [PULL 03/20] target/mips: Fix JALS32/J32 instruction handling for microMIPS Philippe Mathieu-Daudé
2023-03-07 23:46 ` [PULL 04/20] target/mips: Fix SWM32 " Philippe Mathieu-Daudé
2023-03-07 23:46 ` [PULL 05/20] target/mips: Implement CP0.Config7.WII bit support Philippe Mathieu-Daudé
2023-03-07 23:46 ` [PULL 06/20] target/mips: Set correct CP0.Config[4, 5] values for M14K(c) Philippe Mathieu-Daudé
2023-03-07 23:46 ` [PULL 07/20] hw/mips: Declare all length properties as unsigned Philippe Mathieu-Daudé
2023-03-07 23:46 ` [PULL 08/20] hw/mips/itu: Pass SAAR using QOM link property Philippe Mathieu-Daudé
2023-03-07 23:47 ` [PULL 09/20] Revert "hw/isa/i82378: Remove intermediate IRQ forwarder" Philippe Mathieu-Daudé
2023-03-07 23:47 ` [PULL 10/20] Revert "hw/isa/vt82c686: " Philippe Mathieu-Daudé
2023-03-07 23:47 ` Philippe Mathieu-Daudé [this message]
2023-03-07 23:47 ` [PULL 12/20] hw/intc/i8259: Implement legacy LTIM Edge/Level Bank Select Philippe Mathieu-Daudé
2023-03-07 23:47 ` [PULL 13/20] hw/isa/vt82c686: Implement PCI IRQ routing Philippe Mathieu-Daudé
2023-03-07 23:47 ` [PULL 14/20] hw/ppc/pegasos2: Fix PCI interrupt routing Philippe Mathieu-Daudé
2023-03-08 13:54 ` Philippe Mathieu-Daudé
2023-03-08 14:46 ` BALATON Zoltan
2023-03-08 18:51 ` BALATON Zoltan
2023-03-07 23:47 ` [PULL 15/20] hw/usb/vt82c686-uhci-pci: Use PCI IRQ routing Philippe Mathieu-Daudé
2023-03-07 23:47 ` [PULL 16/20] hw/audio/via-ac97: Basic implementation of audio playback Philippe Mathieu-Daudé
2023-03-07 23:47 ` [PULL 17/20] hw/usb/ohci: Implement resume on connection status change Philippe Mathieu-Daudé
2023-03-07 23:47 ` [PULL 18/20] ui/cocoa: Override windowDidResignKey Philippe Mathieu-Daudé
2023-03-07 23:47 ` [PULL 19/20] memory: Dump HPA and access type of ramblocks Philippe Mathieu-Daudé
2023-03-07 23:47 ` [PULL 20/20] log: Remove unneeded new line Philippe Mathieu-Daudé
2023-03-09 13:13 ` [PULL 00/20] MIPS patches for 2023-03-07 Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230307234711.55375-12-philmd@linaro.org \
--to=philmd@linaro.org \
--cc=ReneEngel80@emailn.de \
--cc=balaton@eik.bme.hu \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).