qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Philippe Mathieu-Daudé" <philmd@linaro.org>
To: qemu-devel@nongnu.org
Cc: qemu-ppc@nongnu.org, "David Woodhouse" <dwmw2@infradead.org>,
	"BALATON Zoltan" <balaton@eik.bme.hu>,
	"Daniel Henrique Barboza" <danielhb413@gmail.com>,
	"Philippe Mathieu-Daudé" <philmd@linaro.org>,
	"Michael S. Tsirkin" <mst@redhat.com>,
	"Paolo Bonzini" <pbonzini@redhat.com>
Subject: [PULL 12/20] hw/intc/i8259: Implement legacy LTIM Edge/Level Bank Select
Date: Wed,  8 Mar 2023 00:47:03 +0100	[thread overview]
Message-ID: <20230307234711.55375-13-philmd@linaro.org> (raw)
In-Reply-To: <20230307234711.55375-1-philmd@linaro.org>

From: David Woodhouse <dwmw2@infradead.org>

Back in the mists of time, before EISA came along and required per-pin
level control in the ELCR register, the i8259 had a single chip-wide
level-mode control in bit 3 of ICW1.

Even in the PIIX3 datasheet from 1996 this is documented as 'This bit is
disabled', but apparently MorphOS is using it in the version of the
i8259 which is in the Pegasos2 board as part of the VT8231 chipset.

It's easy enough to implement, and I think it's harmless enough to do so
unconditionally.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
[balaton: updated commit message as asked by author]
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <3f09b2dd109d19851d786047ad5c2ff459c90cd7.1678188711.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
 hw/intc/i8259.c                 | 10 ++++------
 hw/intc/i8259_common.c          | 24 +++++++++++++++++++++++-
 include/hw/isa/i8259_internal.h |  1 +
 3 files changed, 28 insertions(+), 7 deletions(-)

diff --git a/hw/intc/i8259.c b/hw/intc/i8259.c
index 17910f3bcb..bbae2d87f4 100644
--- a/hw/intc/i8259.c
+++ b/hw/intc/i8259.c
@@ -133,7 +133,7 @@ static void pic_set_irq(void *opaque, int irq, int level)
     }
 #endif
 
-    if (s->elcr & mask) {
+    if (s->ltim || (s->elcr & mask)) {
         /* level triggered */
         if (level) {
             s->irr |= mask;
@@ -167,7 +167,7 @@ static void pic_intack(PICCommonState *s, int irq)
         s->isr |= (1 << irq);
     }
     /* We don't clear a level sensitive interrupt here */
-    if (!(s->elcr & (1 << irq))) {
+    if (!s->ltim && !(s->elcr & (1 << irq))) {
         s->irr &= ~(1 << irq);
     }
     pic_update_irq(s);
@@ -224,6 +224,7 @@ static void pic_reset(DeviceState *dev)
     PICCommonState *s = PIC_COMMON(dev);
 
     s->elcr = 0;
+    s->ltim = 0;
     pic_init_reset(s);
 }
 
@@ -243,10 +244,7 @@ static void pic_ioport_write(void *opaque, hwaddr addr64,
             s->init_state = 1;
             s->init4 = val & 1;
             s->single_mode = val & 2;
-            if (val & 0x08) {
-                qemu_log_mask(LOG_UNIMP,
-                              "i8259: level sensitive irq not supported\n");
-            }
+            s->ltim = val & 8;
         } else if (val & 0x08) {
             if (val & 0x04) {
                 s->poll = 1;
diff --git a/hw/intc/i8259_common.c b/hw/intc/i8259_common.c
index af2e4a2241..c931dc2d07 100644
--- a/hw/intc/i8259_common.c
+++ b/hw/intc/i8259_common.c
@@ -51,7 +51,7 @@ void pic_reset_common(PICCommonState *s)
     s->special_fully_nested_mode = 0;
     s->init4 = 0;
     s->single_mode = 0;
-    /* Note: ELCR is not reset */
+    /* Note: ELCR and LTIM are not reset */
 }
 
 static int pic_dispatch_pre_save(void *opaque)
@@ -144,6 +144,24 @@ static void pic_print_info(InterruptStatsProvider *obj, Monitor *mon)
                    s->special_fully_nested_mode);
 }
 
+static bool ltim_state_needed(void *opaque)
+{
+    PICCommonState *s = PIC_COMMON(opaque);
+
+    return !!s->ltim;
+}
+
+static const VMStateDescription vmstate_pic_ltim = {
+    .name = "i8259/ltim",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .needed = ltim_state_needed,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT8(ltim, PICCommonState),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
 static const VMStateDescription vmstate_pic_common = {
     .name = "i8259",
     .version_id = 1,
@@ -168,6 +186,10 @@ static const VMStateDescription vmstate_pic_common = {
         VMSTATE_UINT8(single_mode, PICCommonState),
         VMSTATE_UINT8(elcr, PICCommonState),
         VMSTATE_END_OF_LIST()
+    },
+    .subsections = (const VMStateDescription*[]) {
+        &vmstate_pic_ltim,
+        NULL
     }
 };
 
diff --git a/include/hw/isa/i8259_internal.h b/include/hw/isa/i8259_internal.h
index 155b098452..f9dcc4163e 100644
--- a/include/hw/isa/i8259_internal.h
+++ b/include/hw/isa/i8259_internal.h
@@ -61,6 +61,7 @@ struct PICCommonState {
     uint8_t single_mode; /* true if slave pic is not initialized */
     uint8_t elcr; /* PIIX edge/trigger selection*/
     uint8_t elcr_mask;
+    uint8_t ltim; /* Edge/Level Bank Select (pre-PIIX, chip-wide) */
     qemu_irq int_out[1];
     uint32_t master; /* reflects /SP input pin */
     uint32_t iobase;
-- 
2.38.1



  parent reply	other threads:[~2023-03-07 23:48 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-07 23:46 [PULL 00/20] MIPS patches for 2023-03-07 Philippe Mathieu-Daudé
2023-03-07 23:46 ` [PULL 01/20] docs/system: Remove "mips" board from target-mips.rst Philippe Mathieu-Daudé
2023-03-07 23:46 ` [PULL 02/20] target/mips: Replace [g_]assert(0) -> g_assert_not_reached() Philippe Mathieu-Daudé
2023-03-07 23:46 ` [PULL 03/20] target/mips: Fix JALS32/J32 instruction handling for microMIPS Philippe Mathieu-Daudé
2023-03-07 23:46 ` [PULL 04/20] target/mips: Fix SWM32 " Philippe Mathieu-Daudé
2023-03-07 23:46 ` [PULL 05/20] target/mips: Implement CP0.Config7.WII bit support Philippe Mathieu-Daudé
2023-03-07 23:46 ` [PULL 06/20] target/mips: Set correct CP0.Config[4, 5] values for M14K(c) Philippe Mathieu-Daudé
2023-03-07 23:46 ` [PULL 07/20] hw/mips: Declare all length properties as unsigned Philippe Mathieu-Daudé
2023-03-07 23:46 ` [PULL 08/20] hw/mips/itu: Pass SAAR using QOM link property Philippe Mathieu-Daudé
2023-03-07 23:47 ` [PULL 09/20] Revert "hw/isa/i82378: Remove intermediate IRQ forwarder" Philippe Mathieu-Daudé
2023-03-07 23:47 ` [PULL 10/20] Revert "hw/isa/vt82c686: " Philippe Mathieu-Daudé
2023-03-07 23:47 ` [PULL 11/20] hw/display/sm501: Add debug property to control pixman usage Philippe Mathieu-Daudé
2023-03-07 23:47 ` Philippe Mathieu-Daudé [this message]
2023-03-07 23:47 ` [PULL 13/20] hw/isa/vt82c686: Implement PCI IRQ routing Philippe Mathieu-Daudé
2023-03-07 23:47 ` [PULL 14/20] hw/ppc/pegasos2: Fix PCI interrupt routing Philippe Mathieu-Daudé
2023-03-08 13:54   ` Philippe Mathieu-Daudé
2023-03-08 14:46     ` BALATON Zoltan
2023-03-08 18:51       ` BALATON Zoltan
2023-03-07 23:47 ` [PULL 15/20] hw/usb/vt82c686-uhci-pci: Use PCI IRQ routing Philippe Mathieu-Daudé
2023-03-07 23:47 ` [PULL 16/20] hw/audio/via-ac97: Basic implementation of audio playback Philippe Mathieu-Daudé
2023-03-07 23:47 ` [PULL 17/20] hw/usb/ohci: Implement resume on connection status change Philippe Mathieu-Daudé
2023-03-07 23:47 ` [PULL 18/20] ui/cocoa: Override windowDidResignKey Philippe Mathieu-Daudé
2023-03-07 23:47 ` [PULL 19/20] memory: Dump HPA and access type of ramblocks Philippe Mathieu-Daudé
2023-03-07 23:47 ` [PULL 20/20] log: Remove unneeded new line Philippe Mathieu-Daudé
2023-03-09 13:13 ` [PULL 00/20] MIPS patches for 2023-03-07 Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230307234711.55375-13-philmd@linaro.org \
    --to=philmd@linaro.org \
    --cc=balaton@eik.bme.hu \
    --cc=danielhb413@gmail.com \
    --cc=dwmw2@infradead.org \
    --cc=mst@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).