From: Laurent Vivier <laurent@vivier.eu>
To: qemu-devel@nongnu.org
Cc: Mathis Marion <mathis.marion@silabs.com>,
Laurent Vivier <laurent@vivier.eu>
Subject: [PULL 11/28] linux-user: handle netlink flag NLA_F_NESTED
Date: Wed, 8 Mar 2023 14:28:40 +0100 [thread overview]
Message-ID: <20230308132857.161793-12-laurent@vivier.eu> (raw)
In-Reply-To: <20230308132857.161793-1-laurent@vivier.eu>
From: Mathis Marion <mathis.marion@silabs.com>
Newer kernel versions require this flag to be present contrary to older
ones. Depending on the libnl version it is added or not.
Typically when using rtnl_link_inet6_set_addr_gen_mode, the netlink
packet generated may contain the following attribute:
with libnl 3.4
{nla_len=16, nla_type=IFLA_AF_SPEC},
[
{nla_len=12, nla_type=AF_INET6},
[{nla_len=5, nla_type=IFLA_INET6_ADDR_GEN_MODE}, IN6_ADDR_GEN_MODE_NONE]
]
with libnl 3.7
{nla_len=16, nla_type=NLA_F_NESTED|IFLA_AF_SPEC},
[
{nla_len=12, nla_type=NLA_F_NESTED|AF_INET6},
[{nla_len=5, nla_type=IFLA_INET6_ADDR_GEN_MODE}, IN6_ADDR_GEN_MODE_NONE]]
]
Masking the type is likely needed in other places. Only the above cases
are implemented in this patch.
Signed-off-by: Mathis Marion <mathis.marion@silabs.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230307154256.101528-3-Mathis.Marion@silabs.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
---
linux-user/fd-trans.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/linux-user/fd-trans.c b/linux-user/fd-trans.c
index 4852a75d9dcc..c04a97c73a31 100644
--- a/linux-user/fd-trans.c
+++ b/linux-user/fd-trans.c
@@ -1359,7 +1359,7 @@ static abi_long target_to_host_for_each_rtattr(struct rtattr *rtattr,
static abi_long target_to_host_data_spec_nlattr(struct nlattr *nlattr)
{
- switch (nlattr->nla_type) {
+ switch (nlattr->nla_type & NLA_TYPE_MASK) {
case AF_INET6:
return target_to_host_for_each_nlattr(NLA_DATA(nlattr), nlattr->nla_len,
target_to_host_data_inet6_nlattr);
@@ -1375,7 +1375,7 @@ static abi_long target_to_host_data_link_rtattr(struct rtattr *rtattr)
{
uint32_t *u32;
- switch (rtattr->rta_type) {
+ switch (rtattr->rta_type & NLA_TYPE_MASK) {
/* uint32_t */
case QEMU_IFLA_MTU:
case QEMU_IFLA_TXQLEN:
--
2.39.2
next prev parent reply other threads:[~2023-03-08 13:35 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-08 13:28 [PULL 00/28] Linux user for 8.0 patches Laurent Vivier
2023-03-08 13:28 ` [PULL 01/28] linux-user: Fix access to /proc/self/exe Laurent Vivier
2023-03-08 13:28 ` [PULL 02/28] linux-user: fix timerfd read endianness conversion Laurent Vivier
2023-03-08 13:28 ` [PULL 03/28] linux-user: add target to host netlink conversions Laurent Vivier
2023-03-08 13:28 ` [PULL 04/28] linux-user: Fix unaligned memory access in prlimit64 syscall Laurent Vivier
2023-03-08 13:28 ` [PULL 05/28] linux-user: add support for xtensa FDPIC Laurent Vivier
2023-03-08 13:28 ` [PULL 06/28] linux-user: fill out task state in /proc/self/stat Laurent Vivier
2023-03-08 13:28 ` [PULL 07/28] linux-user: Fix brk() to release pages Laurent Vivier
2023-03-08 13:28 ` [PULL 08/28] linux-user: Provide print_raw_param64() for 64-bit values Laurent Vivier
2023-03-08 13:28 ` [PULL 09/28] linux-user: Add strace for prlimit64() syscall Laurent Vivier
2023-03-08 13:28 ` [PULL 10/28] linux-user: fix sockaddr_in6 endianness Laurent Vivier
2023-03-08 13:28 ` Laurent Vivier [this message]
2023-03-08 13:28 ` [PULL 12/28] linux-user: Add translation for argument of msync() Laurent Vivier
2023-03-08 13:28 ` [PULL 13/28] linux-user: Emulate CLONE_PIDFD flag in clone() Laurent Vivier
2023-03-08 13:28 ` [PULL 14/28] linux-user/sparc: Tidy syscall trap Laurent Vivier
2023-03-08 13:28 ` [PULL 15/28] linux-user/sparc: Tidy syscall error return Laurent Vivier
2023-03-08 13:28 ` [PULL 16/28] linux-user/sparc: Use TT_TRAP for flush windows Laurent Vivier
2023-03-08 13:28 ` [PULL 17/28] linux-user/sparc: Tidy window spill/fill traps Laurent Vivier
2023-03-08 13:28 ` [PULL 18/28] linux-user/sparc: Fix sparc64_{get, set}_context traps Laurent Vivier
2023-03-08 13:28 ` [PULL 19/28] linux-user/sparc: Handle software breakpoint trap Laurent Vivier
2023-03-08 13:28 ` [PULL 20/28] linux-user/sparc: Handle division by zero traps Laurent Vivier
2023-03-08 13:28 ` [PULL 21/28] linux-user/sparc: Handle getcc, setcc, getpsr traps Laurent Vivier
2023-03-08 13:28 ` [PULL 22/28] linux-user/sparc: Handle priviledged opcode trap Laurent Vivier
2023-03-08 13:28 ` [PULL 23/28] linux-user/sparc: Handle privilidged action trap Laurent Vivier
2023-03-08 13:28 ` [PULL 24/28] linux-user/sparc: Handle coprocessor disabled trap Laurent Vivier
2023-03-08 13:28 ` [PULL 25/28] linux-user/sparc: Handle unimplemented flush trap Laurent Vivier
2023-03-08 13:28 ` [PULL 26/28] linux-user/sparc: Handle floating-point exceptions Laurent Vivier
2023-03-08 13:28 ` [PULL 27/28] linux-user/sparc: Handle tag overflow traps Laurent Vivier
2023-03-08 13:28 ` [PULL 28/28] linux-user: fix bug about incorrect base addresss of gdt on i386 and x86_64 Laurent Vivier
2023-03-10 10:35 ` [PULL 00/28] Linux user for 8.0 patches Peter Maydell
-- strict thread matches above, loose matches on Subject: below --
2023-03-10 22:08 Laurent Vivier
2023-03-10 22:09 ` [PULL 11/28] linux-user: handle netlink flag NLA_F_NESTED Laurent Vivier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230308132857.161793-12-laurent@vivier.eu \
--to=laurent@vivier.eu \
--cc=mathis.marion@silabs.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).