From: Jason Wang <jasowang@redhat.com>
To: qemu-devel@nongnu.org, peter.maydell@linaro.org
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>,
Jason Wang <jasowang@redhat.com>
Subject: [PULL V2 12/44] e1000e: Remove pending interrupt flags
Date: Fri, 10 Mar 2023 17:34:54 +0800 [thread overview]
Message-ID: <20230310093526.30828-13-jasowang@redhat.com> (raw)
In-Reply-To: <20230310093526.30828-1-jasowang@redhat.com>
From: Akihiko Odaki <akihiko.odaki@daynix.com>
They are duplicate of running throttling timer flags and incomplete as
the flags are not cleared when the interrupts are fired or the device is
reset.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
hw/net/e1000e.c | 5 ++---
hw/net/e1000e_core.c | 19 +++----------------
hw/net/e1000e_core.h | 2 --
hw/net/trace-events | 2 --
4 files changed, 5 insertions(+), 23 deletions(-)
diff --git a/hw/net/e1000e.c b/hw/net/e1000e.c
index d591d01..0bc222d 100644
--- a/hw/net/e1000e.c
+++ b/hw/net/e1000e.c
@@ -631,12 +631,11 @@ static const VMStateDescription e1000e_vmstate = {
VMSTATE_E1000E_INTR_DELAY_TIMER(core.tidv, E1000EState),
VMSTATE_E1000E_INTR_DELAY_TIMER(core.itr, E1000EState),
- VMSTATE_BOOL(core.itr_intr_pending, E1000EState),
+ VMSTATE_UNUSED(1),
VMSTATE_E1000E_INTR_DELAY_TIMER_ARRAY(core.eitr, E1000EState,
E1000E_MSIX_VEC_NUM),
- VMSTATE_BOOL_ARRAY(core.eitr_intr_pending, E1000EState,
- E1000E_MSIX_VEC_NUM),
+ VMSTATE_UNUSED(E1000E_MSIX_VEC_NUM),
VMSTATE_UINT32(core.itr_guest_value, E1000EState),
VMSTATE_UINT32_ARRAY(core.eitr_guest_value, E1000EState,
diff --git a/hw/net/e1000e_core.c b/hw/net/e1000e_core.c
index 87f964c..37aec6a 100644
--- a/hw/net/e1000e_core.c
+++ b/hw/net/e1000e_core.c
@@ -154,11 +154,6 @@ e1000e_intrmgr_on_throttling_timer(void *opaque)
timer->running = false;
- if (!timer->core->itr_intr_pending) {
- trace_e1000e_irq_throttling_no_pending_interrupts();
- return;
- }
-
if (msi_enabled(timer->core->owner)) {
trace_e1000e_irq_msi_notify_postponed();
/* Clear msi_causes_pending to fire MSI eventually */
@@ -180,11 +175,6 @@ e1000e_intrmgr_on_msix_throttling_timer(void *opaque)
timer->running = false;
- if (!timer->core->eitr_intr_pending[idx]) {
- trace_e1000e_irq_throttling_no_pending_vec(idx);
- return;
- }
-
trace_e1000e_irq_msix_notify_postponed_vec(idx);
msix_notify(timer->core->owner, idx);
}
@@ -2015,13 +2005,11 @@ e1000e_clear_ims_bits(E1000ECore *core, uint32_t bits)
}
static inline bool
-e1000e_postpone_interrupt(bool *interrupt_pending,
- E1000IntrDelayTimer *timer)
+e1000e_postpone_interrupt(E1000IntrDelayTimer *timer)
{
if (timer->running) {
trace_e1000e_irq_postponed_by_xitr(timer->delay_reg << 2);
- *interrupt_pending = true;
return true;
}
@@ -2035,14 +2023,13 @@ e1000e_postpone_interrupt(bool *interrupt_pending,
static inline bool
e1000e_itr_should_postpone(E1000ECore *core)
{
- return e1000e_postpone_interrupt(&core->itr_intr_pending, &core->itr);
+ return e1000e_postpone_interrupt(&core->itr);
}
static inline bool
e1000e_eitr_should_postpone(E1000ECore *core, int idx)
{
- return e1000e_postpone_interrupt(&core->eitr_intr_pending[idx],
- &core->eitr[idx]);
+ return e1000e_postpone_interrupt(&core->eitr[idx]);
}
static void
diff --git a/hw/net/e1000e_core.h b/hw/net/e1000e_core.h
index b8f38c4..d0a14b4 100644
--- a/hw/net/e1000e_core.h
+++ b/hw/net/e1000e_core.h
@@ -95,10 +95,8 @@ struct E1000Core {
E1000IntrDelayTimer tidv;
E1000IntrDelayTimer itr;
- bool itr_intr_pending;
E1000IntrDelayTimer eitr[E1000E_MSIX_VEC_NUM];
- bool eitr_intr_pending[E1000E_MSIX_VEC_NUM];
VMChangeStateEntry *vmstate;
diff --git a/hw/net/trace-events b/hw/net/trace-events
index 4c0ec3f..8fa4299 100644
--- a/hw/net/trace-events
+++ b/hw/net/trace-events
@@ -201,10 +201,8 @@ e1000e_rx_metadata_ipv6_filtering_disabled(void) "IPv6 RX filtering disabled by
e1000e_vlan_vet(uint16_t vet) "Setting VLAN ethernet type 0x%X"
e1000e_irq_msi_notify(uint32_t cause) "MSI notify 0x%x"
-e1000e_irq_throttling_no_pending_interrupts(void) "No pending interrupts to notify"
e1000e_irq_msi_notify_postponed(void) "Sending MSI postponed by ITR"
e1000e_irq_legacy_notify_postponed(void) "Raising legacy IRQ postponed by ITR"
-e1000e_irq_throttling_no_pending_vec(int idx) "No pending interrupts for vector %d"
e1000e_irq_msix_notify_postponed_vec(int idx) "Sending MSI-X postponed by EITR[%d]"
e1000e_irq_legacy_notify(bool level) "IRQ line state: %d"
e1000e_irq_msix_notify_vec(uint32_t vector) "MSI-X notify vector 0x%x"
--
2.7.4
next prev parent reply other threads:[~2023-03-10 9:41 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-10 9:34 [PULL V2 00/44] Net patches Jason Wang
2023-03-10 9:34 ` [PULL V2 01/44] e1000e: Fix the code style Jason Wang
2023-03-10 9:34 ` [PULL V2 02/44] hw/net: Add more MII definitions Jason Wang
2023-03-10 9:34 ` [PULL V2 03/44] fsl_etsec: Use hw/net/mii.h Jason Wang
2023-03-10 9:34 ` [PULL V2 04/44] e1000: " Jason Wang
2023-03-10 9:34 ` [PULL V2 05/44] e1000: Mask registers when writing Jason Wang
2023-03-10 9:34 ` [PULL V2 06/44] e1000e: Introduce E1000E_LOW_BITS_SET_FUNC Jason Wang
2023-03-10 9:34 ` [PULL V2 07/44] e1000e: Mask registers when writing Jason Wang
2023-03-10 9:34 ` [PULL V2 08/44] e1000: Use more constant definitions Jason Wang
2023-03-10 9:34 ` [PULL V2 09/44] e1000e: " Jason Wang
2023-03-10 9:34 ` [PULL V2 10/44] e1000: Use memcpy to intialize registers Jason Wang
2023-03-10 9:34 ` [PULL V2 11/44] e1000e: " Jason Wang
2023-03-10 9:34 ` Jason Wang [this message]
2023-03-10 9:34 ` [PULL V2 13/44] e1000e: Improve software reset Jason Wang
2023-03-10 9:34 ` [PULL V2 14/44] e1000: Configure ResettableClass Jason Wang
2023-03-10 9:34 ` [PULL V2 15/44] e1000e: " Jason Wang
2023-03-10 9:34 ` [PULL V2 16/44] e1000e: Introduce e1000_rx_desc_union Jason Wang
2023-03-10 9:34 ` [PULL V2 17/44] e1000e: Set MII_ANER_NWAY Jason Wang
2023-03-10 9:35 ` [PULL V2 18/44] e1000e: Remove extra pointer indirection Jason Wang
2023-03-10 9:35 ` [PULL V2 19/44] net: Check L4 header size Jason Wang
2023-03-10 9:35 ` [PULL V2 20/44] e1000x: Alter the signature of e1000x_is_vlan_packet Jason Wang
2023-03-10 9:35 ` [PULL V2 21/44] net: Strip virtio-net header when dumping Jason Wang
2023-03-10 9:35 ` [PULL V2 22/44] hw/net/net_tx_pkt: Automatically determine if virtio-net header is used Jason Wang
2023-03-10 9:35 ` [PULL V2 23/44] hw/net/net_rx_pkt: Remove net_rx_pkt_has_virt_hdr Jason Wang
2023-03-10 9:35 ` [PULL V2 24/44] e1000e: Perform software segmentation for loopback Jason Wang
2023-03-10 9:35 ` [PULL V2 25/44] hw/net/net_tx_pkt: Implement TCP segmentation Jason Wang
2023-03-10 9:35 ` [PULL V2 26/44] hw/net/net_tx_pkt: Check the payload length Jason Wang
2023-03-10 9:35 ` [PULL V2 27/44] e1000e: Do not assert when MSI-X is disabled later Jason Wang
2023-03-10 9:35 ` [PULL V2 28/44] MAINTAINERS: Add Akihiko Odaki as a e1000e reviewer Jason Wang
2023-03-10 9:35 ` [PULL V2 29/44] MAINTAINERS: Add e1000e test files Jason Wang
2023-03-10 9:35 ` [PULL V2 30/44] e1000e: Combine rx traces Jason Wang
2023-03-10 9:35 ` [PULL V2 31/44] e1000: Count CRC in Tx statistics Jason Wang
2023-03-10 9:35 ` [PULL V2 32/44] e1000e: " Jason Wang
2023-03-10 9:35 ` [PULL V2 33/44] net/eth: Report if headers are actually present Jason Wang
2023-03-10 9:35 ` [PULL V2 34/44] e1000e: Implement system clock Jason Wang
2023-03-10 9:35 ` [PULL V2 35/44] net/eth: Introduce EthL4HdrProto Jason Wang
2023-03-10 9:35 ` [PULL V2 36/44] pcie: Introduce pcie_sriov_num_vfs Jason Wang
2023-03-10 9:35 ` [PULL V2 37/44] e1000: Split header files Jason Wang
2023-03-10 9:35 ` [PULL V2 38/44] Intrdocue igb device emulation Jason Wang
2023-03-10 9:35 ` [PULL V2 39/44] tests/qtest/e1000e-test: Fabricate ethernet header Jason Wang
2023-03-10 9:35 ` [PULL V2 40/44] tests/qtest/libqos/e1000e: Export macreg functions Jason Wang
2023-03-10 9:35 ` [PULL V2 41/44] igb: Introduce qtest for igb device Jason Wang
2023-03-10 9:35 ` [PULL V2 42/44] tests/avocado: Add igb test Jason Wang
2023-03-10 9:35 ` [PULL V2 43/44] docs/system/devices/igb: Add igb documentation Jason Wang
2023-03-10 9:35 ` [PULL V2 44/44] ebpf: fix compatibility with libbpf 1.0+ Jason Wang
2023-03-12 10:56 ` [PULL V2 00/44] Net patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230310093526.30828-13-jasowang@redhat.com \
--to=jasowang@redhat.com \
--cc=akihiko.odaki@daynix.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).