From: Jason Wang <jasowang@redhat.com>
To: qemu-devel@nongnu.org, peter.maydell@linaro.org
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>,
Jason Wang <jasowang@redhat.com>
Subject: [PULL V2 30/44] e1000e: Combine rx traces
Date: Fri, 10 Mar 2023 17:35:12 +0800 [thread overview]
Message-ID: <20230310093526.30828-31-jasowang@redhat.com> (raw)
In-Reply-To: <20230310093526.30828-1-jasowang@redhat.com>
From: Akihiko Odaki <akihiko.odaki@daynix.com>
Whether a packet will be written back to the guest depends on the
remaining space of the queue. Therefore, e1000e_rx_written_to_guest and
e1000e_rx_not_written_to_guest should log the index of the queue instead
of generated interrupts. This also removes the need of
e1000e_rx_rss_dispatched_to_queue, which logs the queue index.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
hw/net/e1000e_core.c | 6 ++----
hw/net/trace-events | 5 ++---
2 files changed, 4 insertions(+), 7 deletions(-)
diff --git a/hw/net/e1000e_core.c b/hw/net/e1000e_core.c
index 76c7814..4fec6df 100644
--- a/hw/net/e1000e_core.c
+++ b/hw/net/e1000e_core.c
@@ -1759,8 +1759,6 @@ e1000e_receive_internal(E1000ECore *core, const struct iovec *iov, int iovcnt,
e1000e_rss_parse_packet(core, core->rx_pkt, &rss_info);
e1000e_rx_ring_init(core, &rxr, rss_info.queue);
- trace_e1000e_rx_rss_dispatched_to_queue(rxr.i->idx);
-
total_size = net_rx_pkt_get_total_len(core->rx_pkt) +
e1000x_fcs_len(core->mac);
@@ -1786,12 +1784,12 @@ e1000e_receive_internal(E1000ECore *core, const struct iovec *iov, int iovcnt,
rdmts_hit = e1000e_rx_descr_threshold_hit(core, rxr.i);
n |= e1000e_rx_wb_interrupt_cause(core, rxr.i->idx, rdmts_hit);
- trace_e1000e_rx_written_to_guest(n);
+ trace_e1000e_rx_written_to_guest(rxr.i->idx);
} else {
n |= E1000_ICS_RXO;
retval = 0;
- trace_e1000e_rx_not_written_to_guest(n);
+ trace_e1000e_rx_not_written_to_guest(rxr.i->idx);
}
if (!e1000e_intrmgr_delay_rx_causes(core, &n)) {
diff --git a/hw/net/trace-events b/hw/net/trace-events
index f7257a0..d24ba94 100644
--- a/hw/net/trace-events
+++ b/hw/net/trace-events
@@ -165,8 +165,8 @@ e1000e_rx_descr(int ridx, uint64_t base, uint8_t len) "Next RX descriptor: ring
e1000e_rx_set_rctl(uint32_t rctl) "RCTL = 0x%x"
e1000e_rx_receive_iov(int iovcnt) "Received vector of %d fragments"
e1000e_rx_flt_dropped(void) "Received packet dropped by RX filter"
-e1000e_rx_written_to_guest(uint32_t causes) "Received packet written to guest (ICR causes %u)"
-e1000e_rx_not_written_to_guest(uint32_t causes) "Received packet NOT written to guest (ICR causes %u)"
+e1000e_rx_written_to_guest(int queue_idx) "Received packet written to guest (queue %d)"
+e1000e_rx_not_written_to_guest(int queue_idx) "Received packet NOT written to guest (queue %d)"
e1000e_rx_interrupt_set(uint32_t causes) "Receive interrupt set (ICR causes %u)"
e1000e_rx_interrupt_delayed(uint32_t causes) "Receive interrupt delayed (ICR causes %u)"
e1000e_rx_set_cso(int cso_state) "RX CSO state set to %d"
@@ -180,7 +180,6 @@ e1000e_rx_rss_type(uint32_t type) "RSS type is %u"
e1000e_rx_rss_ip4(bool isfragment, bool istcp, uint32_t mrqc, bool tcpipv4_enabled, bool ipv4_enabled) "RSS IPv4: fragment %d, tcp %d, mrqc 0x%X, tcpipv4 enabled %d, ipv4 enabled %d"
e1000e_rx_rss_ip6_rfctl(uint32_t rfctl) "RSS IPv6: rfctl 0x%X"
e1000e_rx_rss_ip6(bool ex_dis, bool new_ex_dis, bool istcp, bool has_ext_headers, bool ex_dst_valid, bool ex_src_valid, uint32_t mrqc, bool tcpipv6_enabled, bool ipv6ex_enabled, bool ipv6_enabled) "RSS IPv6: ex_dis: %d, new_ex_dis: %d, tcp %d, has_ext_headers %d, ex_dst_valid %d, ex_src_valid %d, mrqc 0x%X, tcpipv6 enabled %d, ipv6ex enabled %d, ipv6 enabled %d"
-e1000e_rx_rss_dispatched_to_queue(int queue_idx) "Packet being dispatched to queue %d"
e1000e_rx_metadata_protocols(bool isip4, bool isip6, bool isudp, bool istcp) "protocols: ip4: %d, ip6: %d, udp: %d, tcp: %d"
e1000e_rx_metadata_vlan(uint16_t vlan_tag) "VLAN tag is 0x%X"
--
2.7.4
next prev parent reply other threads:[~2023-03-10 9:43 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-10 9:34 [PULL V2 00/44] Net patches Jason Wang
2023-03-10 9:34 ` [PULL V2 01/44] e1000e: Fix the code style Jason Wang
2023-03-10 9:34 ` [PULL V2 02/44] hw/net: Add more MII definitions Jason Wang
2023-03-10 9:34 ` [PULL V2 03/44] fsl_etsec: Use hw/net/mii.h Jason Wang
2023-03-10 9:34 ` [PULL V2 04/44] e1000: " Jason Wang
2023-03-10 9:34 ` [PULL V2 05/44] e1000: Mask registers when writing Jason Wang
2023-03-10 9:34 ` [PULL V2 06/44] e1000e: Introduce E1000E_LOW_BITS_SET_FUNC Jason Wang
2023-03-10 9:34 ` [PULL V2 07/44] e1000e: Mask registers when writing Jason Wang
2023-03-10 9:34 ` [PULL V2 08/44] e1000: Use more constant definitions Jason Wang
2023-03-10 9:34 ` [PULL V2 09/44] e1000e: " Jason Wang
2023-03-10 9:34 ` [PULL V2 10/44] e1000: Use memcpy to intialize registers Jason Wang
2023-03-10 9:34 ` [PULL V2 11/44] e1000e: " Jason Wang
2023-03-10 9:34 ` [PULL V2 12/44] e1000e: Remove pending interrupt flags Jason Wang
2023-03-10 9:34 ` [PULL V2 13/44] e1000e: Improve software reset Jason Wang
2023-03-10 9:34 ` [PULL V2 14/44] e1000: Configure ResettableClass Jason Wang
2023-03-10 9:34 ` [PULL V2 15/44] e1000e: " Jason Wang
2023-03-10 9:34 ` [PULL V2 16/44] e1000e: Introduce e1000_rx_desc_union Jason Wang
2023-03-10 9:34 ` [PULL V2 17/44] e1000e: Set MII_ANER_NWAY Jason Wang
2023-03-10 9:35 ` [PULL V2 18/44] e1000e: Remove extra pointer indirection Jason Wang
2023-03-10 9:35 ` [PULL V2 19/44] net: Check L4 header size Jason Wang
2023-03-10 9:35 ` [PULL V2 20/44] e1000x: Alter the signature of e1000x_is_vlan_packet Jason Wang
2023-03-10 9:35 ` [PULL V2 21/44] net: Strip virtio-net header when dumping Jason Wang
2023-03-10 9:35 ` [PULL V2 22/44] hw/net/net_tx_pkt: Automatically determine if virtio-net header is used Jason Wang
2023-03-10 9:35 ` [PULL V2 23/44] hw/net/net_rx_pkt: Remove net_rx_pkt_has_virt_hdr Jason Wang
2023-03-10 9:35 ` [PULL V2 24/44] e1000e: Perform software segmentation for loopback Jason Wang
2023-03-10 9:35 ` [PULL V2 25/44] hw/net/net_tx_pkt: Implement TCP segmentation Jason Wang
2023-03-10 9:35 ` [PULL V2 26/44] hw/net/net_tx_pkt: Check the payload length Jason Wang
2023-03-10 9:35 ` [PULL V2 27/44] e1000e: Do not assert when MSI-X is disabled later Jason Wang
2023-03-10 9:35 ` [PULL V2 28/44] MAINTAINERS: Add Akihiko Odaki as a e1000e reviewer Jason Wang
2023-03-10 9:35 ` [PULL V2 29/44] MAINTAINERS: Add e1000e test files Jason Wang
2023-03-10 9:35 ` Jason Wang [this message]
2023-03-10 9:35 ` [PULL V2 31/44] e1000: Count CRC in Tx statistics Jason Wang
2023-03-10 9:35 ` [PULL V2 32/44] e1000e: " Jason Wang
2023-03-10 9:35 ` [PULL V2 33/44] net/eth: Report if headers are actually present Jason Wang
2023-03-10 9:35 ` [PULL V2 34/44] e1000e: Implement system clock Jason Wang
2023-03-10 9:35 ` [PULL V2 35/44] net/eth: Introduce EthL4HdrProto Jason Wang
2023-03-10 9:35 ` [PULL V2 36/44] pcie: Introduce pcie_sriov_num_vfs Jason Wang
2023-03-10 9:35 ` [PULL V2 37/44] e1000: Split header files Jason Wang
2023-03-10 9:35 ` [PULL V2 38/44] Intrdocue igb device emulation Jason Wang
2023-03-10 9:35 ` [PULL V2 39/44] tests/qtest/e1000e-test: Fabricate ethernet header Jason Wang
2023-03-10 9:35 ` [PULL V2 40/44] tests/qtest/libqos/e1000e: Export macreg functions Jason Wang
2023-03-10 9:35 ` [PULL V2 41/44] igb: Introduce qtest for igb device Jason Wang
2023-03-10 9:35 ` [PULL V2 42/44] tests/avocado: Add igb test Jason Wang
2023-03-10 9:35 ` [PULL V2 43/44] docs/system/devices/igb: Add igb documentation Jason Wang
2023-03-10 9:35 ` [PULL V2 44/44] ebpf: fix compatibility with libbpf 1.0+ Jason Wang
2023-03-12 10:56 ` [PULL V2 00/44] Net patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230310093526.30828-31-jasowang@redhat.com \
--to=jasowang@redhat.com \
--cc=akihiko.odaki@daynix.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).