From: Fei Wu <fei2.wu@intel.com>
To: qemu-riscv@nongnu.org, qemu-devel@nongnu.org,
zhiwei_liu@linux.alibaba.com, richard.henderson@linaro.org,
liweiwei@iscas.ac.cn
Cc: Fei Wu <fei2.wu@intel.com>, Palmer Dabbelt <palmer@dabbelt.com>,
Alistair Francis <alistair.francis@wdc.com>,
Bin Meng <bin.meng@windriver.com>,
Daniel Henrique Barboza <dbarboza@ventanamicro.com>,
Christoph Muellner <christoph.muellner@vrull.eu>
Subject: [PATCH v5 1/2] target/riscv: separate priv from mmu_idx
Date: Fri, 24 Mar 2023 13:41:53 +0800 [thread overview]
Message-ID: <20230324054154.414846-2-fei2.wu@intel.com> (raw)
In-Reply-To: <20230324054154.414846-1-fei2.wu@intel.com>
Currently it's assumed the 2 low bits of mmu_idx map to privilege mode,
this assumption won't last as we are about to add more mmu_idx. Here an
individual priv field is added into TB_FLAGS.
Signed-off-by: Fei Wu <fei2.wu@intel.com>
---
target/riscv/cpu.h | 2 +-
target/riscv/cpu_helper.c | 4 +++-
target/riscv/insn_trans/trans_privileged.c.inc | 2 +-
target/riscv/insn_trans/trans_xthead.c.inc | 7 +------
target/riscv/translate.c | 3 +++
5 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h
index 638e47c75a..ac3eb9abca 100644
--- a/target/riscv/cpu.h
+++ b/target/riscv/cpu.h
@@ -623,7 +623,6 @@ G_NORETURN void riscv_raise_exception(CPURISCVState *env,
target_ulong riscv_cpu_get_fflags(CPURISCVState *env);
void riscv_cpu_set_fflags(CPURISCVState *env, target_ulong);
-#define TB_FLAGS_PRIV_MMU_MASK 3
#define TB_FLAGS_PRIV_HYP_ACCESS_MASK (1 << 2)
#define TB_FLAGS_MSTATUS_FS MSTATUS_FS
#define TB_FLAGS_MSTATUS_VS MSTATUS_VS
@@ -650,6 +649,7 @@ FIELD(TB_FLAGS, VTA, 24, 1)
FIELD(TB_FLAGS, VMA, 25, 1)
/* Native debug itrigger */
FIELD(TB_FLAGS, ITRIGGER, 26, 1)
+FIELD(TB_FLAGS, PRIV, 27, 2)
#ifdef TARGET_RISCV32
#define riscv_cpu_mxl(env) ((void)(env), MXL_RV32)
diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c
index f88c503cf4..4e275b904a 100644
--- a/target/riscv/cpu_helper.c
+++ b/target/riscv/cpu_helper.c
@@ -82,6 +82,8 @@ void cpu_get_tb_cpu_state(CPURISCVState *env, target_ulong *pc,
flags |= TB_FLAGS_MSTATUS_FS;
flags |= TB_FLAGS_MSTATUS_VS;
#else
+ flags = FIELD_DP32(flags, TB_FLAGS, PRIV, env->priv);
+
flags |= cpu_mmu_index(env, 0);
if (riscv_cpu_fp_enabled(env)) {
flags |= env->mstatus & MSTATUS_FS;
@@ -762,7 +764,7 @@ static int get_physical_address(CPURISCVState *env, hwaddr *physical,
* (riscv_cpu_do_interrupt) is correct */
MemTxResult res;
MemTxAttrs attrs = MEMTXATTRS_UNSPECIFIED;
- int mode = mmu_idx & TB_FLAGS_PRIV_MMU_MASK;
+ int mode = env->priv;
bool use_background = false;
hwaddr ppn;
RISCVCPU *cpu = env_archcpu(env);
diff --git a/target/riscv/insn_trans/trans_privileged.c.inc b/target/riscv/insn_trans/trans_privileged.c.inc
index 59501b2780..9305b18299 100644
--- a/target/riscv/insn_trans/trans_privileged.c.inc
+++ b/target/riscv/insn_trans/trans_privileged.c.inc
@@ -52,7 +52,7 @@ static bool trans_ebreak(DisasContext *ctx, arg_ebreak *a)
* that no exception will be raised when fetching them.
*/
- if (semihosting_enabled(ctx->mem_idx < PRV_S) &&
+ if (semihosting_enabled(ctx->priv < PRV_S) &&
(pre_addr & TARGET_PAGE_MASK) == (post_addr & TARGET_PAGE_MASK)) {
pre = opcode_at(&ctx->base, pre_addr);
ebreak = opcode_at(&ctx->base, ebreak_addr);
diff --git a/target/riscv/insn_trans/trans_xthead.c.inc b/target/riscv/insn_trans/trans_xthead.c.inc
index df504c3f2c..adfb53cb4c 100644
--- a/target/riscv/insn_trans/trans_xthead.c.inc
+++ b/target/riscv/insn_trans/trans_xthead.c.inc
@@ -265,12 +265,7 @@ static bool trans_th_tst(DisasContext *ctx, arg_th_tst *a)
static inline int priv_level(DisasContext *ctx)
{
-#ifdef CONFIG_USER_ONLY
- return PRV_U;
-#else
- /* Priv level is part of mem_idx. */
- return ctx->mem_idx & TB_FLAGS_PRIV_MMU_MASK;
-#endif
+ return ctx->priv;
}
/* Test if priv level is M, S, or U (cannot fail). */
diff --git a/target/riscv/translate.c b/target/riscv/translate.c
index 0ee8ee147d..b215d18250 100644
--- a/target/riscv/translate.c
+++ b/target/riscv/translate.c
@@ -69,6 +69,7 @@ typedef struct DisasContext {
uint32_t mstatus_hs_fs;
uint32_t mstatus_hs_vs;
uint32_t mem_idx;
+ uint32_t priv;
/* Remember the rounding mode encoded in the previous fp instruction,
which we have already installed into env->fp_status. Or -1 for
no previous fp instruction. Note that we exit the TB when writing
@@ -1162,8 +1163,10 @@ static void riscv_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs)
} else {
ctx->virt_enabled = false;
}
+ ctx->priv = FIELD_EX32(tb_flags, TB_FLAGS, PRIV);
#else
ctx->virt_enabled = false;
+ ctx->priv = PRV_U;
#endif
ctx->misa_ext = env->misa_ext;
ctx->frm = -1; /* unknown rounding mode */
--
2.25.1
next prev parent reply other threads:[~2023-03-24 8:01 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-24 5:41 [PATCH v5 0/2] target/riscv: reduce MSTATUS_SUM overhead Fei Wu
2023-03-24 5:41 ` Fei Wu [this message]
2023-03-24 17:56 ` [PATCH v5 1/2] target/riscv: separate priv from mmu_idx Richard Henderson
2023-03-24 5:41 ` [PATCH v5 2/2] target/riscv: reduce overhead of MSTATUS_SUM change Fei Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230324054154.414846-2-fei2.wu@intel.com \
--to=fei2.wu@intel.com \
--cc=alistair.francis@wdc.com \
--cc=bin.meng@windriver.com \
--cc=christoph.muellner@vrull.eu \
--cc=dbarboza@ventanamicro.com \
--cc=liweiwei@iscas.ac.cn \
--cc=palmer@dabbelt.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-riscv@nongnu.org \
--cc=richard.henderson@linaro.org \
--cc=zhiwei_liu@linux.alibaba.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).