[PATCH] hw/mips/malta: Fix the malta machine on big endian hosts

[Thomas Huth <thuth@redhat.com>]

Booting a Linux kernel with the malta machine is currently broken
on big endian hosts. The cpu_to_gt32 macro wants to byteswap a value
for little endian targets only, but uses the wrong way to do this:
cpu_to_[lb]e32 works the other way round on big endian hosts! Fix
it by using the same ways on both, big and little endian hosts.

Fixes: 0c8427baf0 ("hw/mips/malta: Use bootloader helper to set BAR registers")
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 I've checked that both, the kernel from
 https://landley.net/toybox/downloads/binaries/mkroot/0.8.9/mipsel.tgz
 and the kernel from
 https://landley.net/toybox/downloads/binaries/mkroot/0.8.9/mips.tgz
 now boot fine on both, a little endian (x86) and a big endian (s390x) host.

 hw/mips/malta.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/hw/mips/malta.c b/hw/mips/malta.c
index af9021316d..b26ed1fc9a 100644
--- a/hw/mips/malta.c
+++ b/hw/mips/malta.c
@@ -629,9 +629,9 @@ static void bl_setup_gt64120_jump_kernel(void **p, uint64_t run_addr,
 
     /* Bus endianess is always reversed */
 #if TARGET_BIG_ENDIAN
-#define cpu_to_gt32 cpu_to_le32
+#define cpu_to_gt32(x) (x)
 #else
-#define cpu_to_gt32 cpu_to_be32
+#define cpu_to_gt32(x) bswap32(x)
 #endif
 
     /* setup MEM-to-PCI0 mapping as done by YAMON */
-- 
2.31.1