[PATCH 00/16] qapi qga/qapi-schema: Doc fixes

[PATCH 00/16] qapi qga/qapi-schema: Doc fixes

[Markus Armbruster]

It's always nice to get doc fixes into the release, but if it's too
late, it's too late.

Generated code does not change, except for the last patch, which moves
a bit of code without changing it.

Markus Armbruster (16):
  qga/qapi-schema: Tidy up documentation of guest-fsfreeze-status
  qga/qapi-schema: Fix a misspelled reference
  qapi: Fix misspelled references
  qapi: Fix up references to long gone error classes
  qapi/block-core: Clean up after removal of dirty bitmap @status
  qapi: @foo should be used to reference, not ``foo``
  qapi: Tidy up examples
  qapi: Delete largely misleading "Stability Considerations"
  qapi: Fix bullet list markup in documentation
  qapi: Fix unintended definition lists in documentation
  qga/qapi-schema: Fix member documentation markup
  qapi: Fix argument documentation markup
  qapi: Replace ad hoc "since" documentation by member documentation
  qapi: Fix misspelled section tags in doc comments
  qapi: Format since information the conventional way: (since X.Y)
  qapi storage-daemon/qapi: Fix documentation section structure

 docs/devel/qapi-code-gen.rst         |  8 ++-
 docs/interop/firmware.json           |  6 +-
 qapi/block-core.json                 | 82 ++++++++++++++--------------
 qapi/block.json                      |  2 +-
 qapi/char.json                       |  4 +-
 qapi/control.json                    |  2 +-
 qapi/cryptodev.json                  |  4 ++
 qapi/job.json                        |  4 +-
 qapi/machine-target.json             |  2 +-
 qapi/machine.json                    | 26 +++++----
 qapi/migration.json                  | 37 ++++++++-----
 qapi/misc.json                       |  6 +-
 qapi/net.json                        | 25 +++------
 qapi/qapi-schema.json                | 24 +-------
 qapi/qdev.json                       |  2 +-
 qapi/qom.json                        |  4 +-
 qapi/rdma.json                       |  2 +-
 qapi/replay.json                     |  3 +
 qapi/run-state.json                  |  6 +-
 qapi/stats.json                      |  3 +-
 qapi/tpm.json                        |  3 +-
 qapi/trace.json                      |  1 +
 qapi/ui.json                         | 12 ++--
 qga/qapi-schema.json                 | 10 ++--
 storage-daemon/qapi/qapi-schema.json | 22 +++++---
 25 files changed, 154 insertions(+), 146 deletions(-)

-- 
2.39.2

[PATCH 01/16] qga/qapi-schema: Tidy up documentation of guest-fsfreeze-status

[Markus Armbruster]

Delete "error state indicates", because it doesn't make sense.
I suspect it was an accident.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
 qga/qapi-schema.json | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/qga/qapi-schema.json b/qga/qapi-schema.json
index 796434ed34..f349345116 100644
--- a/qga/qapi-schema.json
+++ b/qga/qapi-schema.json
@@ -420,7 +420,7 @@
 ##
 # @guest-fsfreeze-status:
 #
-# Get guest fsfreeze state. error state indicates
+# Get guest fsfreeze state.
 #
 # Returns: GuestFsfreezeStatus ("thawed", "frozen", etc., as defined below)
 #
-- 
2.39.2

Re: [PATCH 01/16] qga/qapi-schema: Tidy up documentation of guest-fsfreeze-status

[Konstantin Kostiuk]

[-- Attachment #1: Type: text/plain, Size: 816 bytes --]

Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>

On Tue, Apr 4, 2023 at 2:59 PM Markus Armbruster <armbru@redhat.com> wrote:

> Delete "error state indicates", because it doesn't make sense.
> I suspect it was an accident.
>
> Signed-off-by: Markus Armbruster <armbru@redhat.com>
> ---
>  qga/qapi-schema.json | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/qga/qapi-schema.json b/qga/qapi-schema.json
> index 796434ed34..f349345116 100644
> --- a/qga/qapi-schema.json
> +++ b/qga/qapi-schema.json
> @@ -420,7 +420,7 @@
>  ##
>  # @guest-fsfreeze-status:
>  #
> -# Get guest fsfreeze state. error state indicates
> +# Get guest fsfreeze state.
>  #
>  # Returns: GuestFsfreezeStatus ("thawed", "frozen", etc., as defined
> below)
>  #
> --
> 2.39.2
>
>

[-- Attachment #2: Type: text/html, Size: 1301 bytes --]

[PATCH 02/16] qga/qapi-schema: Fix a misspelled reference

[Markus Armbruster]

Code returns a list of GuestNetworkInterface, documentation claims
GuestNetworkInfo, which doesn't exist.  Fix the documentation.

Fixes: 3424fc9f16a1 (qemu-ga: add guest-network-get-interfaces command)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
 qga/qapi-schema.json | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/qga/qapi-schema.json b/qga/qapi-schema.json
index f349345116..bb9bac0655 100644
--- a/qga/qapi-schema.json
+++ b/qga/qapi-schema.json
@@ -722,7 +722,7 @@
 # Get list of guest IP addresses, MAC addresses
 # and netmasks.
 #
-# Returns: List of GuestNetworkInfo on success.
+# Returns: List of GuestNetworkInterface on success.
 #
 # Since: 1.1
 ##
-- 
2.39.2

[PATCH 03/16] qapi: Fix misspelled references

[Markus Armbruster]

query-cpu-definitions returns a list of CpuDefinitionInfo, but
documentation claims CpuDefInfo, which doesn't exist.

query-migrate-capabilities returns a list of
MigrationCapabilityStatus, but documentation claims
MigrationCapabilitiesStatus, which doesn't exist.

balloon and query-balloon can fail with KVMMissingCap, but
documentation claims KvmMissingCap, which doesn't exist.

Fix the documentation.

Fixes: e4e31c6324af (qapi: add query-cpu-definitions command (v2))
Fixes: bbf6da32b5bd (Add migration capabilities)
Fixes: d72f326431e2 (qapi: Convert balloon)
Fixes: 96637bcdf9e0 (qapi: Convert query-balloon)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
 qapi/machine-target.json | 2 +-
 qapi/machine.json        | 4 ++--
 qapi/migration.json      | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/qapi/machine-target.json b/qapi/machine-target.json
index 2e267fa458..b94fbdb65e 100644
--- a/qapi/machine-target.json
+++ b/qapi/machine-target.json
@@ -331,7 +331,7 @@
 #
 # Return a list of supported virtual CPU definitions
 #
-# Returns: a list of CpuDefInfo
+# Returns: a list of CpuDefinitionInfo
 #
 # Since: 1.2
 ##
diff --git a/qapi/machine.json b/qapi/machine.json
index 604b686e59..8c3c58c763 100644
--- a/qapi/machine.json
+++ b/qapi/machine.json
@@ -1029,7 +1029,7 @@
 #
 # Returns: - Nothing on success
 #          - If the balloon driver is enabled but not functional because the KVM
-#            kernel module cannot support it, KvmMissingCap
+#            kernel module cannot support it, KVMMissingCap
 #          - If no balloon device is present, DeviceNotActive
 #
 # Notes: This command just issues a request to the guest.  When it returns,
@@ -1067,7 +1067,7 @@
 #
 # Returns: - @BalloonInfo on success
 #          - If the balloon driver is enabled but not functional because the KVM
-#            kernel module cannot support it, KvmMissingCap
+#            kernel module cannot support it, KVMMissingCap
 #          - If no balloon device is present, DeviceNotActive
 #
 # Since: 0.14
diff --git a/qapi/migration.json b/qapi/migration.json
index c84fa10e86..87c174dca2 100644
--- a/qapi/migration.json
+++ b/qapi/migration.json
@@ -531,7 +531,7 @@
 #
 # Returns information about the current migration capabilities status
 #
-# Returns: @MigrationCapabilitiesStatus
+# Returns: @MigrationCapabilityStatus
 #
 # Since: 1.2
 #
-- 
2.39.2

Re: [PATCH 03/16] qapi: Fix misspelled references

[David Hildenbrand]

On 04.04.23 13:58, Markus Armbruster wrote:
> query-cpu-definitions returns a list of CpuDefinitionInfo, but
> documentation claims CpuDefInfo, which doesn't exist.
> 
> query-migrate-capabilities returns a list of
> MigrationCapabilityStatus, but documentation claims
> MigrationCapabilitiesStatus, which doesn't exist.
> 
> balloon and query-balloon can fail with KVMMissingCap, but
> documentation claims KvmMissingCap, which doesn't exist.
> 
> Fix the documentation.
> 
> Fixes: e4e31c6324af (qapi: add query-cpu-definitions command (v2))
> Fixes: bbf6da32b5bd (Add migration capabilities)
> Fixes: d72f326431e2 (qapi: Convert balloon)
> Fixes: 96637bcdf9e0 (qapi: Convert query-balloon)
> Signed-off-by: Markus Armbruster <armbru@redhat.com>
> ---
>   qapi/machine-target.json | 2 +-
>   qapi/machine.json        | 4 ++--
>   qapi/migration.json      | 2 +-
>   3 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/qapi/machine-target.json b/qapi/machine-target.json
> index 2e267fa458..b94fbdb65e 100644
> --- a/qapi/machine-target.json
> +++ b/qapi/machine-target.json
> @@ -331,7 +331,7 @@
>   #
>   # Return a list of supported virtual CPU definitions
>   #
> -# Returns: a list of CpuDefInfo
> +# Returns: a list of CpuDefinitionInfo
>   #
>   # Since: 1.2
>   ##
> diff --git a/qapi/machine.json b/qapi/machine.json
> index 604b686e59..8c3c58c763 100644
> --- a/qapi/machine.json
> +++ b/qapi/machine.json
> @@ -1029,7 +1029,7 @@
>   #
>   # Returns: - Nothing on success
>   #          - If the balloon driver is enabled but not functional because the KVM
> -#            kernel module cannot support it, KvmMissingCap
> +#            kernel module cannot support it, KVMMissingCap
>   #          - If no balloon device is present, DeviceNotActive
>   #
>   # Notes: This command just issues a request to the guest.  When it returns,
> @@ -1067,7 +1067,7 @@
>   #
>   # Returns: - @BalloonInfo on success
>   #          - If the balloon driver is enabled but not functional because the KVM
> -#            kernel module cannot support it, KvmMissingCap
> +#            kernel module cannot support it, KVMMissingCap
>   #          - If no balloon device is present, DeviceNotActive
>   #
>   # Since: 0.14
> diff --git a/qapi/migration.json b/qapi/migration.json
> index c84fa10e86..87c174dca2 100644
> --- a/qapi/migration.json
> +++ b/qapi/migration.json
> @@ -531,7 +531,7 @@
>   #
>   # Returns information about the current migration capabilities status
>   #
> -# Returns: @MigrationCapabilitiesStatus
> +# Returns: @MigrationCapabilityStatus
>   #
>   # Since: 1.2
>   #

Reviewed-by: David Hildenbrand <david@redhat.com>

-- 
Thanks,

David / dhildenb

[PATCH 04/16] qapi: Fix up references to long gone error classes

[Markus Armbruster]

Commit de253f14912e88f4 (qmp: switch to the new error format on the
wire) removed most error classes.  Several later commits mistakenly
mentioned them in documentation.  Replace them by the actual error
class there.

Fixes: 44e3e053af56 (qmp: add interface blockdev-snapshot-delete-internal-sync)
Fixes: f323bc9e8b3b (qmp: add interface blockdev-snapshot-internal-sync)
Fixes: ba1c048a8f9c (qapi: Introduce add-fd, remove-fd, query-fdsets)
Fixes: ed61fc10e8c8 (QAPI: add command for live block commit, 'block-commit')
Fixes: e4c8f004c55d (qapi: convert sendkey)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
 qapi/block-core.json | 4 ++--
 qapi/misc.json       | 6 +++---
 qapi/ui.json         | 2 +-
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/qapi/block-core.json b/qapi/block-core.json
index c05ad0c07e..75f7c62405 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -5784,7 +5784,7 @@
 #          - If any snapshot matching @name exists, or @name is empty,
 #            GenericError
 #          - If the format of the image used does not support it,
-#            BlockFormatFeatureNotSupported
+#            GenericError
 #
 # Since: 1.7
 #
@@ -5820,7 +5820,7 @@
 #          - If @device is not a valid block device, GenericError
 #          - If snapshot not found, GenericError
 #          - If the format of the image used does not support it,
-#            BlockFormatFeatureNotSupported
+#            GenericError
 #          - If @id and @name are both not specified, GenericError
 #
 # Since: 1.7
diff --git a/qapi/misc.json b/qapi/misc.json
index 6ddd16ea28..7e278ca1eb 100644
--- a/qapi/misc.json
+++ b/qapi/misc.json
@@ -349,8 +349,8 @@
 # @opaque: A free-form string that can be used to describe the fd.
 #
 # Returns: - @AddfdInfo on success
-#          - If file descriptor was not received, FdNotSupplied
-#          - If @fdset-id is a negative value, InvalidParameterValue
+#          - If file descriptor was not received, GenericError
+#          - If @fdset-id is a negative value, GenericError
 #
 # Notes: The list of fd sets is shared by all monitor connections.
 #
@@ -379,7 +379,7 @@
 # @fd: The file descriptor that is to be removed.
 #
 # Returns: - Nothing on success
-#          - If @fdset-id or @fd is not found, FdNotFound
+#          - If @fdset-id or @fd is not found, GenericError
 #
 # Since: 1.2
 #
diff --git a/qapi/ui.json b/qapi/ui.json
index 98322342f7..25f9d731df 100644
--- a/qapi/ui.json
+++ b/qapi/ui.json
@@ -985,7 +985,7 @@
 #             to 100
 #
 # Returns: - Nothing on success
-#          - If key is unknown or redundant, InvalidParameter
+#          - If key is unknown or redundant, GenericError
 #
 # Since: 1.3
 #
-- 
2.39.2

[PATCH 05/16] qapi/block-core: Clean up after removal of dirty bitmap @status

[Markus Armbruster]

Commit 81cbfd50886 (block: remove dirty bitmaps 'status' field)
removed deprecated BlockDirtyInfo member @status.  It neglected to
remove references to its enumeration values from the documentation of
its replacements.  Do that now.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
 qapi/block-core.json | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/qapi/block-core.json b/qapi/block-core.json
index 75f7c62405..eeb2ed3f16 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -582,11 +582,11 @@
 # @granularity: granularity of the dirty bitmap in bytes (since 1.4)
 #
 # @recording: true if the bitmap is recording new writes from the guest.
-#             Replaces ``active`` and ``disabled`` statuses. (since 4.0)
+#             (since 4.0)
 #
 # @busy: true if the bitmap is in-use by some operation (NBD or jobs)
 #        and cannot be modified via QMP or used by another operation.
-#        Replaces ``locked`` and ``frozen`` statuses. (since 4.0)
+#        (since 4.0)
 #
 # @persistent: true if the bitmap was stored on disk, is scheduled to be stored
 #              on disk, or both. (since 4.0)
-- 
2.39.2

Re: [PATCH 05/16] qapi/block-core: Clean up after removal of dirty bitmap @status

[John Snow]

On Tue, Apr 4, 2023 at 7:59 AM Markus Armbruster <armbru@redhat.com> wrote:
>
> Commit 81cbfd50886 (block: remove dirty bitmaps 'status' field)
> removed deprecated BlockDirtyInfo member @status.  It neglected to
> remove references to its enumeration values from the documentation of
> its replacements.  Do that now.
>
> Signed-off-by: Markus Armbruster <armbru@redhat.com>
> ---
>  qapi/block-core.json | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/qapi/block-core.json b/qapi/block-core.json
> index 75f7c62405..eeb2ed3f16 100644
> --- a/qapi/block-core.json
> +++ b/qapi/block-core.json
> @@ -582,11 +582,11 @@
>  # @granularity: granularity of the dirty bitmap in bytes (since 1.4)
>  #
>  # @recording: true if the bitmap is recording new writes from the guest.
> -#             Replaces ``active`` and ``disabled`` statuses. (since 4.0)
> +#             (since 4.0)
>  #
>  # @busy: true if the bitmap is in-use by some operation (NBD or jobs)
>  #        and cannot be modified via QMP or used by another operation.
> -#        Replaces ``locked`` and ``frozen`` statuses. (since 4.0)
> +#        (since 4.0)
>  #
>  # @persistent: true if the bitmap was stored on disk, is scheduled to be stored
>  #              on disk, or both. (since 4.0)
> --
> 2.39.2
>

Reviewed-By: John Snow <jsnow@redhat.com>

[PATCH 06/16] qapi: @foo should be used to reference, not ``foo``

[Markus Armbruster]

Documentation suggests @foo is merely shorthand for ``foo``.  It's
not, it carries additional meaning: it's a reference to a QAPI schema
name.

Reword the documentation to spell that out.

Fix up the few ``foo`` that should be @foo.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
 docs/devel/qapi-code-gen.rst | 8 +++++---
 docs/interop/firmware.json   | 6 +++---
 qapi/qom.json                | 2 +-
 qapi/ui.json                 | 2 +-
 4 files changed, 10 insertions(+), 8 deletions(-)

diff --git a/docs/devel/qapi-code-gen.rst b/docs/devel/qapi-code-gen.rst
index 23e7f2fb1c..23f9059db2 100644
--- a/docs/devel/qapi-code-gen.rst
+++ b/docs/devel/qapi-code-gen.rst
@@ -925,9 +925,11 @@ first character of the first line.
 
 The usual ****strong****, *\*emphasized\** and ````literal```` markup
 should be used.  If you need a single literal ``*``, you will need to
-backslash-escape it.  As an extension beyond the usual rST syntax, you
-can also use ``@foo`` to reference a name in the schema; this is rendered
-the same way as ````foo````.
+backslash-escape it.
+
+Use ``@foo`` to reference a name in the schema.  This is an rST
+extension.  It is rendered the same way as ````foo````, but carries
+additional meaning.
 
 Example::
 
diff --git a/docs/interop/firmware.json b/docs/interop/firmware.json
index 56814f02b3..cc8f869186 100644
--- a/docs/interop/firmware.json
+++ b/docs/interop/firmware.json
@@ -258,7 +258,7 @@
 #
 # @mode: Describes how the firmware build handles code versus variable
 #        storage. If not present, it must be treated as if it was
-#        configured with value ``split``. Since: 7.0.0
+#        configured with value @split. Since: 7.0.0
 #
 # @executable: Identifies the firmware executable. The @mode
 #              indicates whether there will be an associated
@@ -267,13 +267,13 @@
 #                  -drive if=none,id=pflash0,readonly=on,file=@executable.@filename,format=@executable.@format
 #                  -machine pflash0=pflash0
 #              or equivalent -blockdev instead of -drive. When
-#              @mode is ``combined`` the executable must be
+#              @mode is @combined the executable must be
 #              cloned before use and configured with readonly=off.
 #              With QEMU versions older than 4.0, you have to use
 #                  -drive if=pflash,unit=0,readonly=on,file=@executable.@filename,format=@executable.@format
 #
 # @nvram-template: Identifies the NVRAM template compatible with
-#                  @executable, when @mode is set to ``split``,
+#                  @executable, when @mode is set to @split,
 #                  otherwise it should not be present.
 #                  Management software instantiates an
 #                  individual copy -- a specific NVRAM file -- from
diff --git a/qapi/qom.json b/qapi/qom.json
index a877b879b9..4fe7a93a75 100644
--- a/qapi/qom.json
+++ b/qapi/qom.json
@@ -637,7 +637,7 @@
 #
 # @discard-data: if true, the file contents can be destroyed when QEMU exits,
 #                to avoid unnecessarily flushing data to the backing file. Note
-#                that ``discard-data`` is only an optimization, and QEMU might
+#                that @discard-data is only an optimization, and QEMU might
 #                not discard file contents if it aborts unexpectedly or is
 #                terminated using SIGKILL. (default: false)
 #
diff --git a/qapi/ui.json b/qapi/ui.json
index 25f9d731df..c383c11097 100644
--- a/qapi/ui.json
+++ b/qapi/ui.json
@@ -1247,7 +1247,7 @@
 #              available node on the host.
 #
 # @p2p: Whether to use peer-to-peer connections (accepted through
-#       ``add_client``).
+#       @add_client).
 #
 # @audiodev: Use the specified DBus audiodev to export audio.
 #
-- 
2.39.2

[PATCH 07/16] qapi: Tidy up examples

[Markus Armbruster]

A few examples neglect to prefix QMP input with '->'.  Fix that.

A few examples neglect to show output.  Provide some.  The example
output for query-vcpu-dirty-limit could use further improvement.  Add
a TODO comment.

Use "Examples:" instead of "Example:" where multiple examples are
given.

One example section numbers its two examples.  Not done elswehre;
drop.

Another example section separates them with "or".  Likewise.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
 qapi/block-core.json | 14 ++++++--------
 qapi/block.json      |  2 +-
 qapi/char.json       |  4 ++--
 qapi/machine.json    |  7 ++++---
 qapi/migration.json  | 33 ++++++++++++++++++++++-----------
 qapi/net.json        |  4 +---
 qapi/qdev.json       |  2 +-
 qapi/qom.json        |  2 +-
 qapi/replay.json     |  3 +++
 qapi/ui.json         |  2 +-
 10 files changed, 42 insertions(+), 31 deletions(-)

diff --git a/qapi/block-core.json b/qapi/block-core.json
index eeb2ed3f16..a5a5007b28 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -4574,9 +4574,8 @@
 #
 # Since: 2.9
 #
-# Example:
+# Examples:
 #
-# 1.
 # -> { "execute": "blockdev-add",
 #      "arguments": {
 #           "driver": "qcow2",
@@ -4589,7 +4588,6 @@
 #     }
 # <- { "return": {} }
 #
-# 2.
 # -> { "execute": "blockdev-add",
 #      "arguments": {
 #           "driver": "qcow2",
@@ -5596,7 +5594,7 @@
 #
 # Since: 2.7
 #
-# Example:
+# Examples:
 #
 # 1. Add a new node to a quorum
 # -> { "execute": "blockdev-add",
@@ -5646,7 +5644,7 @@
 #
 # Since: 2.12
 #
-# Example:
+# Examples:
 #
 # 1. Move a node into an IOThread
 # -> { "execute": "x-blockdev-set-iothread",
@@ -5731,18 +5729,18 @@
 #
 # Since: 2.0
 #
-# Example:
+# Examples:
 #
 # 1. Read operation
 #
-# { "event": "QUORUM_REPORT_BAD",
+# <- { "event": "QUORUM_REPORT_BAD",
 #      "data": { "node-name": "node0", "sector-num": 345435, "sectors-count": 5,
 #                "type": "read" },
 #      "timestamp": { "seconds": 1344522075, "microseconds": 745528 } }
 #
 # 2. Flush operation
 #
-# { "event": "QUORUM_REPORT_BAD",
+# <- { "event": "QUORUM_REPORT_BAD",
 #      "data": { "node-name": "node0", "sector-num": 0, "sectors-count": 2097120,
 #                "type": "flush", "error": "Broken pipe" },
 #      "timestamp": { "seconds": 1456406829, "microseconds": 291763 } }
diff --git a/qapi/block.json b/qapi/block.json
index 5fe068f903..94339a1761 100644
--- a/qapi/block.json
+++ b/qapi/block.json
@@ -457,7 +457,7 @@
 #
 # Since: 1.1
 #
-# Example:
+# Examples:
 #
 # -> { "execute": "block_set_io_throttle",
 #      "arguments": { "id": "virtio-blk-pci0/virtio-backend",
diff --git a/qapi/char.json b/qapi/char.json
index 923dc5056d..c9431dd0a7 100644
--- a/qapi/char.json
+++ b/qapi/char.json
@@ -637,7 +637,7 @@
 #
 # Since: 1.4
 #
-# Example:
+# Examples:
 #
 # -> { "execute" : "chardev-add",
 #      "arguments" : { "id" : "foo",
@@ -673,7 +673,7 @@
 #
 # Since: 2.10
 #
-# Example:
+# Examples:
 #
 # -> { "execute" : "chardev-change",
 #      "arguments" : { "id" : "baz",
diff --git a/qapi/machine.json b/qapi/machine.json
index 8c3c58c763..20541cb319 100644
--- a/qapi/machine.json
+++ b/qapi/machine.json
@@ -954,7 +954,7 @@
 #
 # Since: 2.7
 #
-# Example:
+# Examples:
 #
 # For pseries machine type started with -smp 2,cores=2,maxcpus=4 -cpu POWER8:
 #
@@ -1677,8 +1677,9 @@
 # Since: 7.2
 #
 # Example:
-#   {"execute": "dumpdtb"}
-#    "arguments": { "filename": "fdt.dtb" } }
+# -> { "execute": "dumpdtb" }
+#      "arguments": { "filename": "fdt.dtb" } }
+# <- { "return": {} }
 #
 ##
 { 'command': 'dumpdtb',
diff --git a/qapi/migration.json b/qapi/migration.json
index 87c174dca2..477ee4d35b 100644
--- a/qapi/migration.json
+++ b/qapi/migration.json
@@ -273,7 +273,7 @@
 #
 # Since: 0.14
 #
-# Example:
+# Examples:
 #
 # 1. Before the first migration
 #
@@ -521,6 +521,7 @@
 #
 # -> { "execute": "migrate-set-capabilities" , "arguments":
 #      { "capabilities": [ { "capability": "xbzrle", "state": true } ] } }
+# <- { "return": {} }
 #
 ##
 { 'command': 'migrate-set-capabilities',
@@ -989,6 +990,7 @@
 #
 # -> { "execute": "migrate-set-parameters" ,
 #      "arguments": { "compress-level": 1 } }
+# <- { "return": {} }
 #
 ##
 { 'command': 'migrate-set-parameters', 'boxed': true,
@@ -1279,8 +1281,8 @@
 #
 # Example:
 #
-# { "timestamp": {"seconds": 1449669631, "microseconds": 239225},
-#   "event": "MIGRATION_PASS", "data": {"pass": 2} }
+# <- { "timestamp": {"seconds": 1449669631, "microseconds": 239225},
+#       "event": "MIGRATION_PASS", "data": {"pass": 2} }
 #
 ##
 { 'event': 'MIGRATION_PASS',
@@ -1861,8 +1863,9 @@
 #
 # Example:
 #
-#   {"execute": "calc-dirty-rate", "arguments": {"calc-time": 1,
-#                                                'sample-pages': 512} }
+# -> {"execute": "calc-dirty-rate", "arguments": {"calc-time": 1,
+#                                                 'sample-pages': 512} }
+# <- { "return": {} }
 #
 ##
 { 'command': 'calc-dirty-rate', 'data': {'calc-time': 'int64',
@@ -1914,9 +1917,11 @@
 # Since: 7.1
 #
 # Example:
-#   {"execute": "set-vcpu-dirty-limit"}
-#    "arguments": { "dirty-rate": 200,
-#                   "cpu-index": 1 } }
+#
+# -> {"execute": "set-vcpu-dirty-limit"}
+#     "arguments": { "dirty-rate": 200,
+#                    "cpu-index": 1 } }
+# <- { "return": {} }
 #
 ##
 { 'command': 'set-vcpu-dirty-limit',
@@ -1937,8 +1942,10 @@
 # Since: 7.1
 #
 # Example:
-#   {"execute": "cancel-vcpu-dirty-limit"}
-#    "arguments": { "cpu-index": 1 } }
+#
+# -> {"execute": "cancel-vcpu-dirty-limit"},
+#     "arguments": { "cpu-index": 1 } }
+# <- { "return": {} }
 #
 ##
 { 'command': 'cancel-vcpu-dirty-limit',
@@ -1952,7 +1959,11 @@
 # Since: 7.1
 #
 # Example:
-#   {"execute": "query-vcpu-dirty-limit"}
+#
+# -> {"execute": "query-vcpu-dirty-limit"}
+# <- {"return": [
+#        { "limit-rate": 60, "current-rate": 3, "cpu-index": 0},
+#        { "limit-rate": 60, "current-rate": 3, "cpu-index": 1}]}
 #
 ##
 { 'command': 'query-vcpu-dirty-limit',
diff --git a/qapi/net.json b/qapi/net.json
index d6eb30008b..1f1e148f01 100644
--- a/qapi/net.json
+++ b/qapi/net.json
@@ -914,7 +914,7 @@
 #
 # Since: 7.2
 #
-# Example:
+# Examples:
 #
 # <- { "event": "NETDEV_STREAM_CONNECTED",
 #      "data": { "netdev-id": "netdev0",
@@ -922,8 +922,6 @@
 #                          "host": "::1", "type": "inet" } },
 #      "timestamp": { "seconds": 1666269863, "microseconds": 311222 } }
 #
-# or
-#
 # <- { "event": "NETDEV_STREAM_CONNECTED",
 #      "data": { "netdev-id": "netdev0",
 #                "addr": { "path": "/tmp/qemu0", "type": "unix" } },
diff --git a/qapi/qdev.json b/qapi/qdev.json
index 2708fb4e99..f309facf8d 100644
--- a/qapi/qdev.json
+++ b/qapi/qdev.json
@@ -100,7 +100,7 @@
 #
 # Since: 0.14
 #
-# Example:
+# Examples:
 #
 # -> { "execute": "device_del",
 #      "arguments": { "id": "net1" } }
diff --git a/qapi/qom.json b/qapi/qom.json
index 4fe7a93a75..2a3891e3cb 100644
--- a/qapi/qom.json
+++ b/qapi/qom.json
@@ -103,7 +103,7 @@
 #
 # Since: 1.2
 #
-# Example:
+# Examples:
 #
 # 1. Use absolute path
 #
diff --git a/qapi/replay.json b/qapi/replay.json
index 729470300d..fcbf10e237 100644
--- a/qapi/replay.json
+++ b/qapi/replay.json
@@ -81,6 +81,7 @@
 # Example:
 #
 # -> { "execute": "replay-break", "arguments": { "icount": 220414 } }
+# <- { "return": {} }
 #
 ##
 { 'command': 'replay-break', 'data': { 'icount': 'int' } }
@@ -96,6 +97,7 @@
 # Example:
 #
 # -> { "execute": "replay-delete-break" }
+# <- { "return": {} }
 #
 ##
 { 'command': 'replay-delete-break' }
@@ -117,5 +119,6 @@
 # Example:
 #
 # -> { "execute": "replay-seek", "arguments": { "icount": 220414 } }
+# <- { "return": {} }
 ##
 { 'command': 'replay-seek', 'data': { 'icount': 'int' } }
diff --git a/qapi/ui.json b/qapi/ui.json
index c383c11097..e9599dea50 100644
--- a/qapi/ui.json
+++ b/qapi/ui.json
@@ -1153,7 +1153,7 @@
 #       so it is possible to map which console belongs to which device and
 #       display.
 #
-# Example:
+# Examples:
 #
 # 1. Press left mouse button.
 #
-- 
2.39.2

[PATCH 08/16] qapi: Delete largely misleading "Stability Considerations"

[Markus Armbruster]

Documentation section "Stability Considerations" dates back to the
early days of QMP (commit 82a56f0d83d (Monitor: Introduce the
qmp-commands.hx file)).  It became largely misleading years ago.
Delete it.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
 qapi/qapi-schema.json | 22 ----------------------
 1 file changed, 22 deletions(-)

diff --git a/qapi/qapi-schema.json b/qapi/qapi-schema.json
index 7c09af5cc8..e57d8ff801 100644
--- a/qapi/qapi-schema.json
+++ b/qapi/qapi-schema.json
@@ -28,28 +28,6 @@
 #
 # Please, refer to the QMP specification (docs/interop/qmp-spec.txt) for
 # detailed information on the Server command and response formats.
-#
-# = Stability Considerations
-#
-# The current QMP command set (described in this file) may be useful for a
-# number of use cases, however it's limited and several commands have bad
-# defined semantics, specially with regard to command completion.
-#
-# These problems are going to be solved incrementally in the next QEMU releases
-# and we're going to establish a deprecation policy for badly defined commands.
-#
-# If you're planning to adopt QMP, please observe the following:
-#
-#     1. The deprecation policy will take effect and be documented soon, please
-#        check the documentation of each used command as soon as a new release of
-#        QEMU is available
-#
-#     2. DO NOT rely on anything which is not explicit documented
-#
-#     3. Errors, in special, are not documented. Applications should NOT check
-#        for specific errors classes or data (it's strongly recommended to only
-#        check for the "error" key)
-#
 ##
 
 { 'include': 'pragma.json' }
-- 
2.39.2

[PATCH 09/16] qapi: Fix bullet list markup in documentation

[Markus Armbruster]

Peter Maydell's commit 100cc4fe0f08 explains:

    rST insists on a blank line before and after a bulleted list [...]
    Add some extra blank lines in the doc comments so they're
    acceptable rST input.

It missed one in qapi/trace.json.

Paolo Bonzini later added another instance in qapi/stats.json,
providing further, if unintended, evidence for his quip that rST is
the Perl of ASCII-based markups.

Both are parsed as ordinary paragraph, resulting in garbled output.

Add the blank lines we need to get the bullet lists recognized as
such.

Fixes: 100cc4fe0f0827f8da1a5c05f9c65e2aaa40e03d (qapi: Add blank lines before bulleted lists)
Fixes: 467ef823d83e (qmp: add filtering of statistics by target vCPU)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
 qapi/stats.json | 1 +
 qapi/trace.json | 1 +
 2 files changed, 2 insertions(+)

diff --git a/qapi/stats.json b/qapi/stats.json
index 1f5d3c59ab..f17495ee65 100644
--- a/qapi/stats.json
+++ b/qapi/stats.json
@@ -107,6 +107,7 @@
 # The arguments to the query-stats command; specifies a target for which to
 # request statistics and optionally the required subset of information for
 # that target:
+#
 # - which vCPUs to request statistics for
 # - which providers to request statistics from
 # - which named values to return within each provider
diff --git a/qapi/trace.json b/qapi/trace.json
index 6c6982a587..f425d10764 100644
--- a/qapi/trace.json
+++ b/qapi/trace.json
@@ -87,6 +87,7 @@
 # @vcpu: The vCPU to act upon (all by default; since 2.7).
 #
 # An event's state is modified if:
+#
 # - its name matches the @name pattern, and
 # - if @vcpu is given, the event has the "vcpu" property.
 #
-- 
2.39.2

[PATCH 10/16] qapi: Fix unintended definition lists in documentation

[Markus Armbruster]

rST parses something like

    first line
        second line

as a definition list item, where "first line" is the term being
defined by "second line".

This bites us in a couple of places.  Here's one:

    # @bps_max: total throughput limit during bursts,
    #                     in bytes (Since 1.7)

scripts/qapi/parser.py parses this into an "argument section" with
name "bps_max" and text

    total throughput limit during bursts,
	      in bytes (Since 1.7)

docs/sphinx/qapidoc.py duly passes the text to the rST parser, which
parses it as another definition list.  Comes out as nested
definitions: term "bps_max: int (optional)" defined as term "total
throughput limit during bursts," defined as "in bytes (Since 1.7)".

rST truly is the Perl of ASCII-based markups.

Fix by deleting the extra indentation.

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
 qapi/block-core.json | 52 ++++++++++++++++++++++----------------------
 qapi/control.json    |  2 +-
 2 files changed, 27 insertions(+), 27 deletions(-)

diff --git a/qapi/block-core.json b/qapi/block-core.json
index a5a5007b28..2382772e17 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -488,41 +488,41 @@
 #
 # @image: the info of image used (since: 1.6)
 #
-# @bps_max: total throughput limit during bursts,
-#                     in bytes (Since 1.7)
+# @bps_max: total throughput limit during bursts, in bytes
+#           (Since 1.7)
 #
-# @bps_rd_max: read throughput limit during bursts,
-#                        in bytes (Since 1.7)
+# @bps_rd_max: read throughput limit during bursts, in bytes
+#              (Since 1.7)
 #
-# @bps_wr_max: write throughput limit during bursts,
-#                        in bytes (Since 1.7)
+# @bps_wr_max: write throughput limit during bursts, in bytes
+#              (Since 1.7)
 #
-# @iops_max: total I/O operations per second during bursts,
-#                      in bytes (Since 1.7)
+# @iops_max: total I/O operations per second during bursts, in bytes
+#            (Since 1.7)
 #
-# @iops_rd_max: read I/O operations per second during bursts,
-#                         in bytes (Since 1.7)
+# @iops_rd_max: read I/O operations per second during bursts, in bytes
+#               (Since 1.7)
 #
-# @iops_wr_max: write I/O operations per second during bursts,
-#                         in bytes (Since 1.7)
+# @iops_wr_max: write I/O operations per second during bursts, in
+#               bytes (Since 1.7)
 #
-# @bps_max_length: maximum length of the @bps_max burst
-#                            period, in seconds. (Since 2.6)
+# @bps_max_length: maximum length of the @bps_max burst period, in
+#                  seconds. (Since 2.6)
 #
-# @bps_rd_max_length: maximum length of the @bps_rd_max
-#                               burst period, in seconds. (Since 2.6)
+# @bps_rd_max_length: maximum length of the @bps_rd_max burst period,
+#                     in seconds. (Since 2.6)
 #
-# @bps_wr_max_length: maximum length of the @bps_wr_max
-#                               burst period, in seconds. (Since 2.6)
+# @bps_wr_max_length: maximum length of the @bps_wr_max burst period,
+#                     in seconds. (Since 2.6)
 #
-# @iops_max_length: maximum length of the @iops burst
-#                             period, in seconds. (Since 2.6)
+# @iops_max_length: maximum length of the @iops burst period, in
+#                   seconds. (Since 2.6)
 #
-# @iops_rd_max_length: maximum length of the @iops_rd_max
-#                                burst period, in seconds. (Since 2.6)
+# @iops_rd_max_length: maximum length of the @iops_rd_max burst
+#                      period, in seconds. (Since 2.6)
 #
-# @iops_wr_max_length: maximum length of the @iops_wr_max
-#                                burst period, in seconds. (Since 2.6)
+# @iops_wr_max_length: maximum length of the @iops_wr_max burst
+#                      period, in seconds. (Since 2.6)
 #
 # @iops_size: an I/O size in bytes (Since 1.7)
 #
@@ -948,7 +948,7 @@
 #                           by the device (Since 4.2)
 #
 # @invalid_rd_operations: The number of invalid read operations
-#                          performed by the device (Since 2.5)
+#                         performed by the device (Since 2.5)
 #
 # @invalid_wr_operations: The number of invalid write operations
 #                         performed by the device (Since 2.5)
@@ -3735,7 +3735,7 @@
 # Driver specific block device options for Quorum
 #
 # @blkverify: true if the driver must print content mismatch
-#                  set to false by default
+#             set to false by default
 #
 # @children: the children block devices to use
 #
diff --git a/qapi/control.json b/qapi/control.json
index afca2043af..f83499280a 100644
--- a/qapi/control.json
+++ b/qapi/control.json
@@ -195,7 +195,7 @@
 # @id: Name of the monitor
 #
 # @mode: Selects the monitor mode (default: readline in the system
-#           emulator, control in qemu-storage-daemon)
+#        emulator, control in qemu-storage-daemon)
 #
 # @pretty: Enables pretty printing (QMP only)
 #
-- 
2.39.2

Re: [PATCH 10/16] qapi: Fix unintended definition lists in documentation

[Peter Maydell]

On Tue, 4 Apr 2023 at 12:59, Markus Armbruster <armbru@redhat.com> wrote:
>
> rST parses something like
>
>     first line
>         second line
>
> as a definition list item, where "first line" is the term being
> defined by "second line".
>
> This bites us in a couple of places.  Here's one:
>
>     # @bps_max: total throughput limit during bursts,
>     #                     in bytes (Since 1.7)
>
> scripts/qapi/parser.py parses this into an "argument section" with
> name "bps_max" and text
>
>     total throughput limit during bursts,
>               in bytes (Since 1.7)
>
> docs/sphinx/qapidoc.py duly passes the text to the rST parser, which
> parses it as another definition list.  Comes out as nested
> definitions: term "bps_max: int (optional)" defined as term "total
> throughput limit during bursts," defined as "in bytes (Since 1.7)".
>
> rST truly is the Perl of ASCII-based markups.
>
> Fix by deleting the extra indentation.
>
> Reported-by: Peter Maydell <peter.maydell@linaro.org>
> Signed-off-by: Markus Armbruster <armbru@redhat.com>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>

thanks
-- PMM

[PATCH 11/16] qga/qapi-schema: Fix member documentation markup

[Markus Armbruster]

GuestDiskStatsInfo's member documentation is parsed as ordinary text
due to missing colons.  The generated documentation shows these
members as "Not documented".

The fix is obvious: add the missing colons.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
 qga/qapi-schema.json | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/qga/qapi-schema.json b/qga/qapi-schema.json
index bb9bac0655..6a20eeb297 100644
--- a/qga/qapi-schema.json
+++ b/qga/qapi-schema.json
@@ -1553,11 +1553,11 @@
 ##
 # @GuestDiskStatsInfo:
 #
-# @name disk name
+# @name: disk name
 #
-# @major major device number of disk
+# @major: major device number of disk
 #
-# @minor minor device number of disk
+# @minor: minor device number of disk
 ##
 { 'struct': 'GuestDiskStatsInfo',
   'data': {'name': 'str',
-- 
2.39.2

[PATCH 12/16] qapi: Fix argument documentation markup

[Markus Armbruster]

Member / argument documentation of BlockdevAmendOptionsQcow2,
job-resume, and RDMA_GID_STATUS_CHANGED is parsed as ordinary text due
to missing colon or space before the colon.  The generated
documentation shows these members / arguments as "Not documented".

The fix is obvious: add missing colons, delete extra spaces.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
 qapi/block-core.json | 2 +-
 qapi/job.json        | 2 +-
 qapi/rdma.json       | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/qapi/block-core.json b/qapi/block-core.json
index 2382772e17..9dd5ed9a47 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -5155,7 +5155,7 @@
 # Driver specific image amend options for qcow2.
 # For now, only encryption options can be amended
 #
-# @encrypt          Encryption options to be amended
+# @encrypt: Encryption options to be amended
 #
 # Since: 5.1
 ##
diff --git a/qapi/job.json b/qapi/job.json
index d5f84e9615..bc4104757a 100644
--- a/qapi/job.json
+++ b/qapi/job.json
@@ -148,7 +148,7 @@
 # This command returns immediately after resuming a paused job. Resuming an
 # already running job is an error.
 #
-# @id : The job identifier.
+# @id: The job identifier.
 #
 # Since: 3.0
 ##
diff --git a/qapi/rdma.json b/qapi/rdma.json
index a1d2175a8b..5b6b66afa4 100644
--- a/qapi/rdma.json
+++ b/qapi/rdma.json
@@ -17,7 +17,7 @@
 #
 # @subnet-prefix: Subnet Prefix
 #
-# @interface-id : Interface ID
+# @interface-id: Interface ID
 #
 # Since: 4.0
 #
-- 
2.39.2

[PATCH 13/16] qapi: Replace ad hoc "since" documentation by member documentation

[Markus Armbruster]

MemoryDeviceInfoKind, NetClientDriver, and GuestPanicAction mention
some members only in ad hoc since documentation.  The generated
documentation shows these members as "Not documented".

Replace by formal member documentation.

Add actual documentation text for the GuestPanicAction members, to
match existing member documentation there.  For the others, merely
move existing "since" information.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
 qapi/machine.json   | 11 ++++++++---
 qapi/net.json       | 21 ++++++++-------------
 qapi/run-state.json |  6 +++++-
 3 files changed, 21 insertions(+), 17 deletions(-)

diff --git a/qapi/machine.json b/qapi/machine.json
index 20541cb319..172ef0ad96 100644
--- a/qapi/machine.json
+++ b/qapi/machine.json
@@ -1260,6 +1260,14 @@
 ##
 # @MemoryDeviceInfoKind:
 #
+# @nvdimm: since 2.12
+#
+# @virtio-pmem: since 4.1
+#
+# @virtio-mem: since 5.1
+#
+# @sgx-epc: since 6.2.
+#
 # Since: 2.1
 ##
 { 'enum': 'MemoryDeviceInfoKind',
@@ -1302,9 +1310,6 @@
 #
 # Union containing information about a memory device
 #
-# nvdimm is included since 2.12. virtio-pmem is included since 4.1.
-# virtio-mem is included since 5.1. sgx-epc is included since 6.2.
-#
 # Since: 2.1
 ##
 { 'union': 'MemoryDeviceInfo',
diff --git a/qapi/net.json b/qapi/net.json
index 1f1e148f01..3f9db0a718 100644
--- a/qapi/net.json
+++ b/qapi/net.json
@@ -641,14 +641,15 @@
 #
 # Available netdev drivers.
 #
-# Since: 2.7
+# @l2tpv3: since 2.1
+# @vhost-vdpa: since 5.1
+# @vmnet-host: since 7.1
+# @vmnet-shared: since 7.1
+# @vmnet-bridged: since 7.1
+# @stream: since 7.2
+# @dgram: since 7.2
 #
-#        @vhost-vdpa since 5.1
-#        @vmnet-host since 7.1
-#        @vmnet-shared since 7.1
-#        @vmnet-bridged since 7.1
-#        @stream since 7.2
-#        @dgram since 7.2
+# Since: 2.7
 ##
 { 'enum': 'NetClientDriver',
   'data': [ 'none', 'nic', 'user', 'tap', 'l2tpv3', 'socket', 'stream',
@@ -669,12 +670,6 @@
 #
 # Since: 1.2
 #
-#        'l2tpv3' - since 2.1
-#        'vmnet-host' - since 7.1
-#        'vmnet-shared' - since 7.1
-#        'vmnet-bridged' - since 7.1
-#        'stream' since 7.2
-#        'dgram' since 7.2
 ##
 { 'union': 'Netdev',
   'base': { 'id': 'str', 'type': 'NetClientDriver' },
diff --git a/qapi/run-state.json b/qapi/run-state.json
index 419c188dd1..52495884c5 100644
--- a/qapi/run-state.json
+++ b/qapi/run-state.json
@@ -468,7 +468,11 @@
 #
 # @pause: system pauses
 #
-# Since: 2.1 (poweroff since 2.8, run since 5.0)
+# @poweroff: system powers off (since 2.8)
+#
+# @run: system continues to run (since 5.0)
+#
+# Since: 2.1
 ##
 { 'enum': 'GuestPanicAction',
   'data': [ 'pause', 'poweroff', 'run' ] }
-- 
2.39.2

[PATCH 14/16] qapi: Fix misspelled section tags in doc comments

[Markus Armbruster]

Section tags are case sensitive and end with a colon.  Screwing up
either gets them interpreted as ordinary paragraph.  Fix a few.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
 qapi/machine.json   | 4 ++--
 qapi/migration.json | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/qapi/machine.json b/qapi/machine.json
index 172ef0ad96..135a4926a9 100644
--- a/qapi/machine.json
+++ b/qapi/machine.json
@@ -517,7 +517,7 @@
 # @targets: Target root bridge IDs from -device ...,id=<ID> for each root
 #           bridge.
 #
-# Since 7.1
+# Since: 7.1
 ##
 { 'struct': 'CXLFixedMemoryWindowOptions',
   'data': {
@@ -532,7 +532,7 @@
 #
 # @cxl-fmw: List of CXLFixedMemoryWindowOptions
 #
-# Since 7.1
+# Since: 7.1
 ##
 { 'struct' : 'CXLFMWProperties',
   'data': { 'cxl-fmw': ['CXLFixedMemoryWindowOptions'] }
diff --git a/qapi/migration.json b/qapi/migration.json
index 477ee4d35b..1b6c7b19e4 100644
--- a/qapi/migration.json
+++ b/qapi/migration.json
@@ -1991,7 +1991,7 @@
 #
 # data: migration thread name
 #
-# returns: information about migration threads
+# Returns: information about migration threads
 #
 # Since: 7.2
 ##
-- 
2.39.2

[PATCH 15/16] qapi: Format since information the conventional way: (since X.Y)

[Markus Armbruster]

Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
 qapi/block-core.json | 6 +++---
 qapi/stats.json      | 2 +-
 qapi/tpm.json        | 3 +--
 qapi/ui.json         | 6 +++---
 4 files changed, 8 insertions(+), 9 deletions(-)

diff --git a/qapi/block-core.json b/qapi/block-core.json
index 9dd5ed9a47..b57978957f 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -1318,10 +1318,10 @@
 #          value is monotonically increasing.
 #
 # @busy: false if the job is known to be in a quiescent state, with
-#        no pending I/O.  Since 1.3.
+#        no pending I/O.  (Since 1.3)
 #
 # @paused: whether the job is paused or, if @busy is true, will
-#          pause itself as soon as possible.  Since 1.3.
+#          pause itself as soon as possible.  (Since 1.3)
 #
 # @speed: the rate limit, bytes per second
 #
@@ -2741,7 +2741,7 @@
 #
 # @on-error: the action to take on an error (default report).
 #            'stop' and 'enospc' can only be used if the block device
-#            supports io-status (see BlockInfo).  Since 1.3.
+#            supports io-status (see BlockInfo).  (Since 1.3)
 #
 # @filter-node-name: the node name that should be assigned to the
 #                    filter driver that the stream job inserts into the graph
diff --git a/qapi/stats.json b/qapi/stats.json
index f17495ee65..36d5f4dc94 100644
--- a/qapi/stats.json
+++ b/qapi/stats.json
@@ -69,7 +69,7 @@
 #
 # @vcpu: statistics that apply to a single virtual CPU.
 #
-# @cryptodev: statistics that apply to a crypto device. since 8.0
+# @cryptodev: statistics that apply to a crypto device (since 8.0)
 #
 # Since: 7.1
 ##
diff --git a/qapi/tpm.json b/qapi/tpm.json
index 4e2ea9756a..eac87d30b2 100644
--- a/qapi/tpm.json
+++ b/qapi/tpm.json
@@ -44,8 +44,7 @@
 # An enumeration of TPM types
 #
 # @passthrough: TPM passthrough type
-# @emulator: Software Emulator TPM type
-#            Since: 2.11
+# @emulator: Software Emulator TPM type (since 2.11)
 #
 # Since: 1.5
 ##
diff --git a/qapi/ui.json b/qapi/ui.json
index e9599dea50..88de458ba9 100644
--- a/qapi/ui.json
+++ b/qapi/ui.json
@@ -1207,13 +1207,13 @@
 #               window resizes (virtio-gpu) this will default to "on",
 #               assuming the guest will resize the display to match
 #               the window size then.  Otherwise it defaults to "off".
-#               Since 3.1
+#               (Since 3.1)
 # @show-tabs:   Display the tab bar for switching between the various graphical
 #               interfaces (e.g. VGA and virtual console character devices)
 #               by default.
-#               Since 7.1
+#               (Since 7.1)
 # @show-menubar: Display the main window menubar. Defaults to "on".
-#                Since 8.0
+#                (Since 8.0)
 #
 # Since: 2.12
 ##
-- 
2.39.2

Re: [PATCH 15/16] qapi: Format since information the conventional way: (since X.Y)

[Vladimir Sementsov-Ogievskiy]

On 04.04.23 14:59, Markus Armbruster wrote:
> @@ -2741,7 +2741,7 @@
>   #
>   # @on-error: the action to take on an error (default report).
>   #            'stop' and 'enospc' can only be used if the block device
> -#            supports io-status (see BlockInfo).  Since 1.3.
> +#            supports io-status (see BlockInfo).  (Since 1.3)
>   #
>   # @filter-node-name: the node name that should be assigned to the
>   #                    filter driver that the stream job inserts into the graph
> diff --git a/qapi/stats.json b/qapi/stats.json
> index f17495ee65..36d5f4dc94 100644
> --- a/qapi/stats.json
> +++ b/qapi/stats.json
> @@ -69,7 +69,7 @@
>   #
>   # @vcpu: statistics that apply to a single virtual CPU.
>   #
> -# @cryptodev: statistics that apply to a crypto device. since 8.0
> +# @cryptodev: statistics that apply to a crypto device (since 8.0)
>   #
>   # Since: 7.1
>   ##
> diff --git a/qapi/tpm.json b/qapi/tpm.json
> index 4e2ea9756a..eac87d30b2 100644
> --- a/qapi/tpm.json
> +++ b/qapi/tpm.json
> @@ -44,8 +44,7 @@
>   # An enumeration of TPM types
>   #
>   # @passthrough: TPM passthrough type
> -# @emulator: Software Emulator TPM type
> -#            Since: 2.11
> +# @emulator: Software Emulator TPM type (since 2.11)

Seems, we don't have any preference between "some text (since VER)" vs "some text. (Since VER)" ?

-- 
Best regards,
Vladimir

Re: [PATCH 15/16] qapi: Format since information the conventional way: (since X.Y)

[Markus Armbruster]

Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> writes:

> On 04.04.23 14:59, Markus Armbruster wrote:
>> @@ -2741,7 +2741,7 @@
>>   #
>>   # @on-error: the action to take on an error (default report).
>>   #            'stop' and 'enospc' can only be used if the block device
>> -#            supports io-status (see BlockInfo).  Since 1.3.
>> +#            supports io-status (see BlockInfo).  (Since 1.3)
>>   #
>>   # @filter-node-name: the node name that should be assigned to the
>>   #                    filter driver that the stream job inserts into the graph
>> diff --git a/qapi/stats.json b/qapi/stats.json
>> index f17495ee65..36d5f4dc94 100644
>> --- a/qapi/stats.json
>> +++ b/qapi/stats.json
>> @@ -69,7 +69,7 @@
>>   #
>>   # @vcpu: statistics that apply to a single virtual CPU.
>>   #
>> -# @cryptodev: statistics that apply to a crypto device. since 8.0
>> +# @cryptodev: statistics that apply to a crypto device (since 8.0)
>>   #
>>   # Since: 7.1
>>   ##
>> diff --git a/qapi/tpm.json b/qapi/tpm.json
>> index 4e2ea9756a..eac87d30b2 100644
>> --- a/qapi/tpm.json
>> +++ b/qapi/tpm.json
>> @@ -44,8 +44,7 @@
>>   # An enumeration of TPM types
>>   #
>>   # @passthrough: TPM passthrough type
>> -# @emulator: Software Emulator TPM type
>> -#            Since: 2.11
>> +# @emulator: Software Emulator TPM type (since 2.11)
>
> Seems, we don't have any preference between "some text (since VER)" vs "some text. (Since VER)" ?

I personally use (Since VER) after a full sentence ending in
punctuation, and (since VER) after something that doesn't end in
punctuation.

[PATCH 16/16] qapi storage-daemon/qapi: Fix documentation section structure

[Markus Armbruster]

In the QEMU QMP Reference Manual, subsection "Block core (VM
unrelated)" is empty.  Its contents is at the end of subsection
"Background jobs" instead.  That's because qapi/job.json is includeded
first from qapi/block-core.json, which makes qapi/job.json's
documentation go between qapi/block-core.json's subsection heading and
contents.

In the QEMU Storage Daemon QMP Reference Manual, section "Block
Devices" contains nothing but an empty subsection "Block core (VM
unrelated)".  The latter's contents is at the end section "Socket data
types", along with subsection "Block device exports".  Subsection
"Background jobs" is at the end of section "Cryptography".  All this
is because storage-daemon/qapi/qapi-schema.json includes modules in a
confused order.

Fix both as follows.

Turn subsection "Background jobs" into a section.

Move it before section "Block devices" in the QEMU QMP Reference
Manual, by including qapi/jobs.json right before qapi/block.json.

Reorder include directives in storage-daemon/qapi/qapi-schema.json to
match the order in qapi/qapi-schema.json, so that the QEMU Storage
Daemon QMP Reference Manual's section structure the QEMU QMP Reference
Manual's.

In the QEMU QMP Reference Manual, qapi/cryptodev.json's documentation
is at the end of section "Virtio devices".  That's because it lacks a
section heading, and therefore gets squashed into whatever section
happens to precede it.

Add section heading so it's in section "Cryptography devices".

Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
 qapi/cryptodev.json                  |  4 ++++
 qapi/job.json                        |  2 +-
 qapi/qapi-schema.json                |  2 +-
 storage-daemon/qapi/qapi-schema.json | 22 +++++++++++++++-------
 4 files changed, 21 insertions(+), 9 deletions(-)

diff --git a/qapi/cryptodev.json b/qapi/cryptodev.json
index f33f96a692..cf960ea81f 100644
--- a/qapi/cryptodev.json
+++ b/qapi/cryptodev.json
@@ -4,6 +4,10 @@
 # This work is licensed under the terms of the GNU GPL, version 2 or later.
 # See the COPYING file in the top-level directory.
 
+##
+# = Cryptography devices
+##
+
 ##
 # @QCryptodevBackendAlgType:
 #
diff --git a/qapi/job.json b/qapi/job.json
index bc4104757a..9e29a796c5 100644
--- a/qapi/job.json
+++ b/qapi/job.json
@@ -2,7 +2,7 @@
 # vim: filetype=python
 
 ##
-# == Background jobs
+# = Background jobs
 ##
 
 ##
diff --git a/qapi/qapi-schema.json b/qapi/qapi-schema.json
index e57d8ff801..bb7217da26 100644
--- a/qapi/qapi-schema.json
+++ b/qapi/qapi-schema.json
@@ -43,11 +43,11 @@
 { 'include': 'sockets.json' }
 { 'include': 'run-state.json' }
 { 'include': 'crypto.json' }
+{ 'include': 'job.json' }
 { 'include': 'block.json' }
 { 'include': 'block-export.json' }
 { 'include': 'char.json' }
 { 'include': 'dump.json' }
-{ 'include': 'job.json' }
 { 'include': 'net.json' }
 { 'include': 'rdma.json' }
 { 'include': 'rocker.json' }
diff --git a/storage-daemon/qapi/qapi-schema.json b/storage-daemon/qapi/qapi-schema.json
index 67749d1101..f10c949490 100644
--- a/storage-daemon/qapi/qapi-schema.json
+++ b/storage-daemon/qapi/qapi-schema.json
@@ -15,18 +15,26 @@
 
 { 'include': '../../qapi/pragma.json' }
 
+# Documentation generated with qapi-gen.py is in source order, with
+# included sub-schemas inserted at the first include directive
+# (subsequent include directives have no effect).  To get a sane and
+# stable order, it's best to include each sub-schema just once, or
+# include it first right here.
+
+{ 'include': '../../qapi/common.json' }
+{ 'include': '../../qapi/sockets.json' }
+{ 'include': '../../qapi/crypto.json' }
+{ 'include': '../../qapi/job.json' }
+
 ##
 # = Block devices
 ##
 { 'include': '../../qapi/block-core.json' }
 { 'include': '../../qapi/block-export.json' }
+
 { 'include': '../../qapi/char.json' }
-{ 'include': '../../qapi/common.json' }
-{ 'include': '../../qapi/control.json' }
-{ 'include': '../../qapi/crypto.json' }
-{ 'include': '../../qapi/introspect.json' }
-{ 'include': '../../qapi/job.json' }
 { 'include': '../../qapi/authz.json' }
-{ 'include': '../../qapi/qom.json' }
-{ 'include': '../../qapi/sockets.json' }
 { 'include': '../../qapi/transaction.json' }
+{ 'include': '../../qapi/control.json' }
+{ 'include': '../../qapi/introspect.json' }
+{ 'include': '../../qapi/qom.json' }
-- 
2.39.2

Re: [PATCH 16/16] qapi storage-daemon/qapi: Fix documentation section structure

[Eric Blake]

On Tue, Apr 04, 2023 at 01:59:12PM +0200, Markus Armbruster wrote:
> In the QEMU QMP Reference Manual, subsection "Block core (VM
> unrelated)" is empty.  Its contents is at the end of subsection
> "Background jobs" instead.  That's because qapi/job.json is includeded

included

> first from qapi/block-core.json, which makes qapi/job.json's
> documentation go between qapi/block-core.json's subsection heading and
> contents.
> 
> In the QEMU Storage Daemon QMP Reference Manual, section "Block
> Devices" contains nothing but an empty subsection "Block core (VM
> unrelated)".  The latter's contents is at the end section "Socket data
> types", along with subsection "Block device exports".  Subsection
> "Background jobs" is at the end of section "Cryptography".  All this
> is because storage-daemon/qapi/qapi-schema.json includes modules in a
> confused order.
> 
> Fix both as follows.
> 
> Turn subsection "Background jobs" into a section.
> 
> Move it before section "Block devices" in the QEMU QMP Reference
> Manual, by including qapi/jobs.json right before qapi/block.json.
> 
> Reorder include directives in storage-daemon/qapi/qapi-schema.json to
> match the order in qapi/qapi-schema.json, so that the QEMU Storage
> Daemon QMP Reference Manual's section structure the QEMU QMP Reference
> Manual's.
> 
> In the QEMU QMP Reference Manual, qapi/cryptodev.json's documentation
> is at the end of section "Virtio devices".  That's because it lacks a
> section heading, and therefore gets squashed into whatever section
> happens to precede it.
> 
> Add section heading so it's in section "Cryptography devices".
> 
> Signed-off-by: Markus Armbruster <armbru@redhat.com>
> ---
>  qapi/cryptodev.json                  |  4 ++++
>  qapi/job.json                        |  2 +-
>  qapi/qapi-schema.json                |  2 +-
>  storage-daemon/qapi/qapi-schema.json | 22 +++++++++++++++-------
>  4 files changed, 21 insertions(+), 9 deletions(-)

Reviewed-by: Eric Blake <eblake@redhat.com>

-- 
Eric Blake, Principal Software Engineer
Red Hat, Inc.           +1-919-301-3266
Virtualization:  qemu.org | libvirt.org

Re: [PATCH 16/16] qapi storage-daemon/qapi: Fix documentation section structure

[Markus Armbruster]

Eric Blake <eblake@redhat.com> writes:

> On Tue, Apr 04, 2023 at 01:59:12PM +0200, Markus Armbruster wrote:
>> In the QEMU QMP Reference Manual, subsection "Block core (VM
>> unrelated)" is empty.  Its contents is at the end of subsection
>> "Background jobs" instead.  That's because qapi/job.json is includeded
>
> included

Fixing...

>> first from qapi/block-core.json, which makes qapi/job.json's
>> documentation go between qapi/block-core.json's subsection heading and
>> contents.
>> 
>> In the QEMU Storage Daemon QMP Reference Manual, section "Block
>> Devices" contains nothing but an empty subsection "Block core (VM
>> unrelated)".  The latter's contents is at the end section "Socket data
>> types", along with subsection "Block device exports".  Subsection
>> "Background jobs" is at the end of section "Cryptography".  All this
>> is because storage-daemon/qapi/qapi-schema.json includes modules in a
>> confused order.
>> 
>> Fix both as follows.
>> 
>> Turn subsection "Background jobs" into a section.
>> 
>> Move it before section "Block devices" in the QEMU QMP Reference
>> Manual, by including qapi/jobs.json right before qapi/block.json.
>> 
>> Reorder include directives in storage-daemon/qapi/qapi-schema.json to
>> match the order in qapi/qapi-schema.json, so that the QEMU Storage
>> Daemon QMP Reference Manual's section structure the QEMU QMP Reference
>> Manual's.
>> 
>> In the QEMU QMP Reference Manual, qapi/cryptodev.json's documentation
>> is at the end of section "Virtio devices".  That's because it lacks a
>> section heading, and therefore gets squashed into whatever section
>> happens to precede it.
>> 
>> Add section heading so it's in section "Cryptography devices".
>> 
>> Signed-off-by: Markus Armbruster <armbru@redhat.com>
>> ---
>>  qapi/cryptodev.json                  |  4 ++++
>>  qapi/job.json                        |  2 +-
>>  qapi/qapi-schema.json                |  2 +-
>>  storage-daemon/qapi/qapi-schema.json | 22 +++++++++++++++-------
>>  4 files changed, 21 insertions(+), 9 deletions(-)
>
> Reviewed-by: Eric Blake <eblake@redhat.com>

Thanks!

Re: [PATCH 16/16] qapi storage-daemon/qapi: Fix documentation section structure

[zhenwei pi]

Looks good to me, thanks!

Acked-by: zhenwei pi <pizhenwei@bytedance.com>

On 4/4/23 19:59, Markus Armbruster wrote:
> In the QEMU QMP Reference Manual, subsection "Block core (VM
> unrelated)" is empty.  Its contents is at the end of subsection
> "Background jobs" instead.  That's because qapi/job.json is includeded
> first from qapi/block-core.json, which makes qapi/job.json's
> documentation go between qapi/block-core.json's subsection heading and
> contents.
> 
> In the QEMU Storage Daemon QMP Reference Manual, section "Block
> Devices" contains nothing but an empty subsection "Block core (VM
> unrelated)".  The latter's contents is at the end section "Socket data
> types", along with subsection "Block device exports".  Subsection
> "Background jobs" is at the end of section "Cryptography".  All this
> is because storage-daemon/qapi/qapi-schema.json includes modules in a
> confused order.
> 
> Fix both as follows.
> 
> Turn subsection "Background jobs" into a section.
> 
> Move it before section "Block devices" in the QEMU QMP Reference
> Manual, by including qapi/jobs.json right before qapi/block.json.
> 
> Reorder include directives in storage-daemon/qapi/qapi-schema.json to
> match the order in qapi/qapi-schema.json, so that the QEMU Storage
> Daemon QMP Reference Manual's section structure the QEMU QMP Reference
> Manual's.
> 
> In the QEMU QMP Reference Manual, qapi/cryptodev.json's documentation
> is at the end of section "Virtio devices".  That's because it lacks a
> section heading, and therefore gets squashed into whatever section
> happens to precede it.
> 
> Add section heading so it's in section "Cryptography devices".
> 
> Signed-off-by: Markus Armbruster <armbru@redhat.com>
> ---
>   qapi/cryptodev.json                  |  4 ++++
>   qapi/job.json                        |  2 +-
>   qapi/qapi-schema.json                |  2 +-
>   storage-daemon/qapi/qapi-schema.json | 22 +++++++++++++++-------
>   4 files changed, 21 insertions(+), 9 deletions(-)
> 
> diff --git a/qapi/cryptodev.json b/qapi/cryptodev.json
> index f33f96a692..cf960ea81f 100644
> --- a/qapi/cryptodev.json
> +++ b/qapi/cryptodev.json
> @@ -4,6 +4,10 @@
>   # This work is licensed under the terms of the GNU GPL, version 2 or later.
>   # See the COPYING file in the top-level directory.
>   
> +##
> +# = Cryptography devices
> +##
> +
>   ##
>   # @QCryptodevBackendAlgType:
>   #
> diff --git a/qapi/job.json b/qapi/job.json
> index bc4104757a..9e29a796c5 100644
> --- a/qapi/job.json
> +++ b/qapi/job.json
> @@ -2,7 +2,7 @@
>   # vim: filetype=python
>   
>   ##
> -# == Background jobs
> +# = Background jobs
>   ##
>   
>   ##
> diff --git a/qapi/qapi-schema.json b/qapi/qapi-schema.json
> index e57d8ff801..bb7217da26 100644
> --- a/qapi/qapi-schema.json
> +++ b/qapi/qapi-schema.json
> @@ -43,11 +43,11 @@
>   { 'include': 'sockets.json' }
>   { 'include': 'run-state.json' }
>   { 'include': 'crypto.json' }
> +{ 'include': 'job.json' }
>   { 'include': 'block.json' }
>   { 'include': 'block-export.json' }
>   { 'include': 'char.json' }
>   { 'include': 'dump.json' }
> -{ 'include': 'job.json' }
>   { 'include': 'net.json' }
>   { 'include': 'rdma.json' }
>   { 'include': 'rocker.json' }
> diff --git a/storage-daemon/qapi/qapi-schema.json b/storage-daemon/qapi/qapi-schema.json
> index 67749d1101..f10c949490 100644
> --- a/storage-daemon/qapi/qapi-schema.json
> +++ b/storage-daemon/qapi/qapi-schema.json
> @@ -15,18 +15,26 @@
>   
>   { 'include': '../../qapi/pragma.json' }
>   
> +# Documentation generated with qapi-gen.py is in source order, with
> +# included sub-schemas inserted at the first include directive
> +# (subsequent include directives have no effect).  To get a sane and
> +# stable order, it's best to include each sub-schema just once, or
> +# include it first right here.
> +
> +{ 'include': '../../qapi/common.json' }
> +{ 'include': '../../qapi/sockets.json' }
> +{ 'include': '../../qapi/crypto.json' }
> +{ 'include': '../../qapi/job.json' }
> +
>   ##
>   # = Block devices
>   ##
>   { 'include': '../../qapi/block-core.json' }
>   { 'include': '../../qapi/block-export.json' }
> +
>   { 'include': '../../qapi/char.json' }
> -{ 'include': '../../qapi/common.json' }
> -{ 'include': '../../qapi/control.json' }
> -{ 'include': '../../qapi/crypto.json' }
> -{ 'include': '../../qapi/introspect.json' }
> -{ 'include': '../../qapi/job.json' }
>   { 'include': '../../qapi/authz.json' }
> -{ 'include': '../../qapi/qom.json' }
> -{ 'include': '../../qapi/sockets.json' }
>   { 'include': '../../qapi/transaction.json' }
> +{ 'include': '../../qapi/control.json' }
> +{ 'include': '../../qapi/introspect.json' }
> +{ 'include': '../../qapi/qom.json' }

-- 
zhenwei pi

Re: [PATCH 00/16] qapi qga/qapi-schema: Doc fixes

[Vladimir Sementsov-Ogievskiy]

On 04.04.23 14:58, Markus Armbruster wrote:
> It's always nice to get doc fixes into the release, but if it's too
> late, it's too late.
> 
> Generated code does not change, except for the last patch, which moves
> a bit of code without changing it.


I didn't deeply check the details, but looked through and nothing seems wrong to me. Good cleanup!

all patches:
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>


PS: do you plan some automatic checks in build process to avoid similar style/naming problems in future?

-- 
Best regards,
Vladimir

Re: [PATCH 00/16] qapi qga/qapi-schema: Doc fixes

[Markus Armbruster]

Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> writes:

> On 04.04.23 14:58, Markus Armbruster wrote:
>> It's always nice to get doc fixes into the release, but if it's too
>> late, it's too late.
>> Generated code does not change, except for the last patch, which moves
>> a bit of code without changing it.
>
>
> I didn't deeply check the details, but looked through and nothing seems wrong to me. Good cleanup!
>
> all patches:
> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>

Thanks!  (Belatedly)

> PS: do you plan some automatic checks in build process to avoid similar style/naming problems in future?

I'm about to post patches that make it somewhat harder to screw up
indentation (PATCH 10 fixes such screwups).  Harder, not impossible,
because indentation is meaningful in rST.

I believe the best way to catch argument description screwups is making
argument descriptions mandatory.  I hope to find time for that.

Other than that, no promising ideas, I'm afraid.

Re: [PATCH 00/16] qapi qga/qapi-schema: Doc fixes

[Marc-André Lureau]

On Tue, Apr 4, 2023 at 4:02 PM Markus Armbruster <armbru@redhat.com> wrote:
>
> It's always nice to get doc fixes into the release, but if it's too
> late, it's too late.
>
> Generated code does not change, except for the last patch, which moves
> a bit of code without changing it.
>
> Markus Armbruster (16):
>   qga/qapi-schema: Tidy up documentation of guest-fsfreeze-status
>   qga/qapi-schema: Fix a misspelled reference
>   qapi: Fix misspelled references
>   qapi: Fix up references to long gone error classes
>   qapi/block-core: Clean up after removal of dirty bitmap @status
>   qapi: @foo should be used to reference, not ``foo``
>   qapi: Tidy up examples
>   qapi: Delete largely misleading "Stability Considerations"
>   qapi: Fix bullet list markup in documentation
>   qapi: Fix unintended definition lists in documentation
>   qga/qapi-schema: Fix member documentation markup
>   qapi: Fix argument documentation markup
>   qapi: Replace ad hoc "since" documentation by member documentation
>   qapi: Fix misspelled section tags in doc comments
>   qapi: Format since information the conventional way: (since X.Y)
>   qapi storage-daemon/qapi: Fix documentation section structure
>
>  docs/devel/qapi-code-gen.rst         |  8 ++-
>  docs/interop/firmware.json           |  6 +-
>  qapi/block-core.json                 | 82 ++++++++++++++--------------
>  qapi/block.json                      |  2 +-
>  qapi/char.json                       |  4 +-
>  qapi/control.json                    |  2 +-
>  qapi/cryptodev.json                  |  4 ++
>  qapi/job.json                        |  4 +-
>  qapi/machine-target.json             |  2 +-
>  qapi/machine.json                    | 26 +++++----
>  qapi/migration.json                  | 37 ++++++++-----
>  qapi/misc.json                       |  6 +-
>  qapi/net.json                        | 25 +++------
>  qapi/qapi-schema.json                | 24 +-------
>  qapi/qdev.json                       |  2 +-
>  qapi/qom.json                        |  4 +-
>  qapi/rdma.json                       |  2 +-
>  qapi/replay.json                     |  3 +
>  qapi/run-state.json                  |  6 +-
>  qapi/stats.json                      |  3 +-
>  qapi/tpm.json                        |  3 +-
>  qapi/trace.json                      |  1 +
>  qapi/ui.json                         | 12 ++--
>  qga/qapi-schema.json                 | 10 ++--
>  storage-daemon/qapi/qapi-schema.json | 22 +++++---
>  25 files changed, 154 insertions(+), 146 deletions(-)
>
> --
> 2.39.2
>
>

lgtm,
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>



-- 
Marc-André Lureau