From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: alistair23@gmail.com, qemu-riscv@nongnu.org,
Fei Wu <fei2.wu@intel.com>,
LIU Zhiwei <zhiwei_liu@linux.alibaba.com>,
Alistair Francis <alistair.francis@wdc.com>,
Weiwei Li <liweiwei@iscas.ac.cn>,
Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Subject: [PATCH v7 06/25] target/riscv: Separate priv from mmu_idx
Date: Wed, 12 Apr 2023 13:43:14 +0200 [thread overview]
Message-ID: <20230412114333.118895-7-richard.henderson@linaro.org> (raw)
In-Reply-To: <20230412114333.118895-1-richard.henderson@linaro.org>
From: Fei Wu <fei2.wu@intel.com>
Currently it's assumed the 2 low bits of mmu_idx map to privilege mode,
this assumption won't last as we are about to add more mmu_idx. Here an
individual priv field is added into TB_FLAGS.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Fei Wu <fei2.wu@intel.com>
Message-Id: <20230324054154.414846-2-fei2.wu@intel.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230325105429.1142530-7-richard.henderson@linaro.org>
---
target/riscv/cpu.h | 2 +-
target/riscv/cpu_helper.c | 4 +++-
target/riscv/translate.c | 2 ++
target/riscv/insn_trans/trans_privileged.c.inc | 2 +-
target/riscv/insn_trans/trans_xthead.c.inc | 14 +-------------
5 files changed, 8 insertions(+), 16 deletions(-)
diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h
index 786ad047ee..9b971ee1b0 100644
--- a/target/riscv/cpu.h
+++ b/target/riscv/cpu.h
@@ -629,7 +629,6 @@ G_NORETURN void riscv_raise_exception(CPURISCVState *env,
target_ulong riscv_cpu_get_fflags(CPURISCVState *env);
void riscv_cpu_set_fflags(CPURISCVState *env, target_ulong);
-#define TB_FLAGS_PRIV_MMU_MASK 3
#define TB_FLAGS_PRIV_HYP_ACCESS_MASK (1 << 2)
#include "exec/cpu-all.h"
@@ -656,6 +655,7 @@ FIELD(TB_FLAGS, ITRIGGER, 22, 1)
/* Virtual mode enabled */
FIELD(TB_FLAGS, VIRT_ENABLED, 23, 1)
FIELD(TB_FLAGS, VSTART_EQ_ZERO, 24, 1)
+FIELD(TB_FLAGS, PRIV, 25, 2)
#ifdef TARGET_RISCV32
#define riscv_cpu_mxl(env) ((void)(env), MXL_RV32)
diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c
index 7579e83c3d..36d6e422d7 100644
--- a/target/riscv/cpu_helper.c
+++ b/target/riscv/cpu_helper.c
@@ -83,6 +83,8 @@ void cpu_get_tb_cpu_state(CPURISCVState *env, target_ulong *pc,
fs = EXT_STATUS_DIRTY;
vs = EXT_STATUS_DIRTY;
#else
+ flags = FIELD_DP32(flags, TB_FLAGS, PRIV, env->priv);
+
flags |= cpu_mmu_index(env, 0);
fs = get_field(env->mstatus, MSTATUS_FS);
vs = get_field(env->mstatus, MSTATUS_VS);
@@ -751,7 +753,7 @@ static int get_physical_address(CPURISCVState *env, hwaddr *physical,
*/
MemTxResult res;
MemTxAttrs attrs = MEMTXATTRS_UNSPECIFIED;
- int mode = mmu_idx & TB_FLAGS_PRIV_MMU_MASK;
+ int mode = env->priv;
bool use_background = false;
hwaddr ppn;
int napot_bits = 0;
diff --git a/target/riscv/translate.c b/target/riscv/translate.c
index 3ab8a9999e..6d59348f0c 100644
--- a/target/riscv/translate.c
+++ b/target/riscv/translate.c
@@ -67,6 +67,7 @@ typedef struct DisasContext {
RISCVExtStatus mstatus_fs;
RISCVExtStatus mstatus_vs;
uint32_t mem_idx;
+ uint32_t priv;
/*
* Remember the rounding mode encoded in the previous fp instruction,
* which we have already installed into env->fp_status. Or -1 for
@@ -1153,6 +1154,7 @@ static void riscv_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs)
uint32_t tb_flags = ctx->base.tb->flags;
ctx->pc_succ_insn = ctx->base.pc_first;
+ ctx->priv = FIELD_EX32(tb_flags, TB_FLAGS, PRIV);
ctx->mem_idx = FIELD_EX32(tb_flags, TB_FLAGS, MEM_IDX);
ctx->mstatus_fs = FIELD_EX32(tb_flags, TB_FLAGS, FS);
ctx->mstatus_vs = FIELD_EX32(tb_flags, TB_FLAGS, VS);
diff --git a/target/riscv/insn_trans/trans_privileged.c.inc b/target/riscv/insn_trans/trans_privileged.c.inc
index e3bee971c6..7c2837194c 100644
--- a/target/riscv/insn_trans/trans_privileged.c.inc
+++ b/target/riscv/insn_trans/trans_privileged.c.inc
@@ -52,7 +52,7 @@ static bool trans_ebreak(DisasContext *ctx, arg_ebreak *a)
* that no exception will be raised when fetching them.
*/
- if (semihosting_enabled(ctx->mem_idx < PRV_S) &&
+ if (semihosting_enabled(ctx->priv == PRV_U) &&
(pre_addr & TARGET_PAGE_MASK) == (post_addr & TARGET_PAGE_MASK)) {
pre = opcode_at(&ctx->base, pre_addr);
ebreak = opcode_at(&ctx->base, ebreak_addr);
diff --git a/target/riscv/insn_trans/trans_xthead.c.inc b/target/riscv/insn_trans/trans_xthead.c.inc
index df504c3f2c..3e13b1d74d 100644
--- a/target/riscv/insn_trans/trans_xthead.c.inc
+++ b/target/riscv/insn_trans/trans_xthead.c.inc
@@ -263,25 +263,13 @@ static bool trans_th_tst(DisasContext *ctx, arg_th_tst *a)
/* XTheadCmo */
-static inline int priv_level(DisasContext *ctx)
-{
-#ifdef CONFIG_USER_ONLY
- return PRV_U;
-#else
- /* Priv level is part of mem_idx. */
- return ctx->mem_idx & TB_FLAGS_PRIV_MMU_MASK;
-#endif
-}
-
/* Test if priv level is M, S, or U (cannot fail). */
#define REQUIRE_PRIV_MSU(ctx)
/* Test if priv level is M or S. */
#define REQUIRE_PRIV_MS(ctx) \
do { \
- int priv = priv_level(ctx); \
- if (!(priv == PRV_M || \
- priv == PRV_S)) { \
+ if (ctx->priv == PRV_U) { \
return false; \
} \
} while (0)
--
2.34.1
next prev parent reply other threads:[~2023-04-12 11:52 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-12 11:43 [PATCH v7 00/25] target/riscv: MSTATUS_SUM + cleanups Richard Henderson
2023-04-12 11:43 ` [PATCH v7 01/25] target/riscv: Extract virt enabled state from tb flags Richard Henderson
2023-04-12 11:43 ` [PATCH v7 02/25] target/riscv: Add a general status enum for extensions Richard Henderson
2023-04-12 11:43 ` [PATCH v7 03/25] target/riscv: Encode the FS and VS on a normal way for tb flags Richard Henderson
2023-04-12 11:43 ` [PATCH v7 04/25] target/riscv: Remove mstatus_hs_{fs, vs} from tb_flags Richard Henderson
2023-04-12 11:43 ` [PATCH v7 05/25] target/riscv: Add a tb flags field for vstart Richard Henderson
2023-04-12 11:43 ` Richard Henderson [this message]
2023-04-12 11:43 ` [PATCH v7 07/25] target/riscv: Reduce overhead of MSTATUS_SUM change Richard Henderson
2023-04-12 11:43 ` [PATCH v7 08/25] accel/tcg: Add cpu_ld*_code_mmu Richard Henderson
2023-04-12 11:43 ` [PATCH v7 09/25] target/riscv: Use cpu_ld*_code_mmu for HLVX Richard Henderson
2023-04-12 11:43 ` [PATCH v7 10/25] target/riscv: Handle HLV, HSV via helpers Richard Henderson
2023-04-12 11:43 ` [PATCH v7 11/25] target/riscv: Rename MMU_HYP_ACCESS_BIT to MMU_2STAGE_BIT Richard Henderson
2023-04-12 11:43 ` [PATCH v7 12/25] target/riscv: Introduce mmuidx_sum Richard Henderson
2023-04-12 11:43 ` [PATCH v7 13/25] target/riscv: Introduce mmuidx_priv Richard Henderson
2023-04-12 11:43 ` [PATCH v7 14/25] target/riscv: Introduce mmuidx_2stage Richard Henderson
2023-04-12 11:43 ` [PATCH v7 15/25] target/riscv: Move hstatus.spvp check to check_access_hlsv Richard Henderson
2023-04-12 11:43 ` [PATCH v7 16/25] target/riscv: Set MMU_2STAGE_BIT in riscv_cpu_mmu_index Richard Henderson
2023-04-12 11:43 ` [PATCH v7 17/25] target/riscv: Check SUM in the correct register Richard Henderson
2023-04-12 11:43 ` [PATCH v7 18/25] target/riscv: Hoist second stage mode change to callers Richard Henderson
2023-04-12 11:43 ` [PATCH v7 19/25] target/riscv: Hoist pbmte and hade out of the level loop Richard Henderson
2023-04-12 11:43 ` [PATCH v7 20/25] target/riscv: Move leaf pte processing out of " Richard Henderson
2023-04-12 11:43 ` [PATCH v7 21/25] target/riscv: Suppress pte update with is_debug Richard Henderson
2023-04-12 11:43 ` [PATCH v7 22/25] target/riscv: Don't modify SUM " Richard Henderson
2023-04-12 11:43 ` [PATCH v7 23/25] target/riscv: Merge checks for reserved pte flags Richard Henderson
2023-04-12 11:43 ` [PATCH v7 24/25] target/riscv: Reorg access check in get_physical_address Richard Henderson
2023-04-12 11:43 ` [PATCH v7 25/25] target/riscv: Reorg sum " Richard Henderson
2023-04-17 2:11 ` [PATCH v7 00/25] target/riscv: MSTATUS_SUM + cleanups Alistair Francis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230412114333.118895-7-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=alistair.francis@wdc.com \
--cc=alistair23@gmail.com \
--cc=dbarboza@ventanamicro.com \
--cc=fei2.wu@intel.com \
--cc=liweiwei@iscas.ac.cn \
--cc=qemu-devel@nongnu.org \
--cc=qemu-riscv@nongnu.org \
--cc=zhiwei_liu@linux.alibaba.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).