From: Viktor Prutyanov <viktor@daynix.com>
To: mst@redhat.com, jasowang@redhat.com, marcel.apfelbaum@gmail.com,
pbonzini@redhat.com, peterx@redhat.com, david@redhat.com
Cc: philmd@linaro.org, qemu-devel@nongnu.org, yan@daynix.com,
yuri.benditovich@daynix.com, Viktor Prutyanov <viktor@daynix.com>
Subject: [RFC PATCH 1/4] pci: add handling of Enable bit in ATS Control Register
Date: Mon, 24 Apr 2023 14:21:44 +0300 [thread overview]
Message-ID: <20230424112147.17083-2-viktor@daynix.com> (raw)
In-Reply-To: <20230424112147.17083-1-viktor@daynix.com>
According to PCIe Address Translation Services specification 5.1.3.,
ATS Control Register has Enable bit to enable/disable ATS.
Add a new field for a trigger function which is called at the Enable
bit change, so that PCIe devices can handle ATS enable/disable.
Signed-off-by: Viktor Prutyanov <viktor@daynix.com>
---
hw/pci/pci.c | 1 +
hw/pci/pcie.c | 21 +++++++++++++++++++++
include/hw/pci/pci_device.h | 3 +++
include/hw/pci/pcie.h | 4 ++++
4 files changed, 29 insertions(+)
diff --git a/hw/pci/pci.c b/hw/pci/pci.c
index 208c16f450..79a47d2589 100644
--- a/hw/pci/pci.c
+++ b/hw/pci/pci.c
@@ -1550,6 +1550,7 @@ void pci_default_write_config(PCIDevice *d, uint32_t addr, uint32_t val_in, int
msi_write_config(d, addr, val_in, l);
msix_write_config(d, addr, val_in, l);
pcie_sriov_config_write(d, addr, val_in, l);
+ pcie_ats_config_write(d, addr, val_in, l);
}
/***********************************************************/
diff --git a/hw/pci/pcie.c b/hw/pci/pcie.c
index 924fdabd15..e0217161e5 100644
--- a/hw/pci/pcie.c
+++ b/hw/pci/pcie.c
@@ -1057,6 +1057,27 @@ void pcie_ats_init(PCIDevice *dev, uint16_t offset, bool aligned)
pci_set_word(dev->wmask + dev->exp.ats_cap + PCI_ATS_CTRL, 0x800f);
}
+void pcie_ats_config_write(PCIDevice *dev, uint32_t address, uint32_t val,
+ int len)
+{
+ uint32_t off;
+ uint16_t ats_cap = dev->exp.ats_cap;
+
+ if (!ats_cap || address < ats_cap) {
+ return;
+ }
+ off = address - ats_cap;
+ if (off >= PCI_EXT_CAP_ATS_SIZEOF) {
+ return;
+ }
+
+ if (range_covers_byte(off, len, PCI_ATS_CTRL + 1)) {
+ if (dev->ats_ctrl_trigger) {
+ dev->ats_ctrl_trigger(dev, !!(val & PCI_ATS_CTRL_ENABLE));
+ }
+ }
+}
+
/* ACS (Access Control Services) */
void pcie_acs_init(PCIDevice *dev, uint16_t offset)
{
diff --git a/include/hw/pci/pci_device.h b/include/hw/pci/pci_device.h
index d3dd0f64b2..2bb1d68f3b 100644
--- a/include/hw/pci/pci_device.h
+++ b/include/hw/pci/pci_device.h
@@ -160,6 +160,9 @@ struct PCIDevice {
/* ID of standby device in net_failover pair */
char *failover_pair_id;
uint32_t acpi_index;
+
+ /* PCI ATS enable/disable trigger */
+ void (*ats_ctrl_trigger)(PCIDevice *dev, bool enable);
};
static inline int pci_intx(PCIDevice *pci_dev)
diff --git a/include/hw/pci/pcie.h b/include/hw/pci/pcie.h
index 798a262a0a..5f2dbd87cf 100644
--- a/include/hw/pci/pcie.h
+++ b/include/hw/pci/pcie.h
@@ -154,4 +154,8 @@ void pcie_cap_slot_unplug_cb(HotplugHandler *hotplug_dev, DeviceState *dev,
Error **errp);
void pcie_cap_slot_unplug_request_cb(HotplugHandler *hotplug_dev,
DeviceState *dev, Error **errp);
+
+void pcie_ats_config_write(PCIDevice *dev, uint32_t address, uint32_t val,
+ int len);
+
#endif /* QEMU_PCIE_H */
--
2.21.0
next prev parent reply other threads:[~2023-04-24 11:23 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-24 11:21 [RFC PATCH 0/4] vhost: register and change IOMMU flag depending on ATS state Viktor Prutyanov
2023-04-24 11:21 ` Viktor Prutyanov [this message]
2023-04-26 5:31 ` [RFC PATCH 1/4] pci: add handling of Enable bit in ATS Control Register Jason Wang
2023-04-26 5:48 ` Jason Wang
2023-05-02 21:35 ` Viktor Prutyanov
2023-04-24 11:21 ` [RFC PATCH 2/4] virtio-pci: add handling of ATS state change Viktor Prutyanov
2023-04-26 5:50 ` Jason Wang
2023-04-24 11:21 ` [RFC PATCH 3/4] memory: add interface for triggering IOMMU notify_flag_changed handler Viktor Prutyanov
2023-04-26 14:20 ` Peter Xu
2023-04-24 11:21 ` [RFC PATCH 4/4] vhost: register and change IOMMU flag depending on ATS state Viktor Prutyanov
2023-04-26 5:54 ` Jason Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230424112147.17083-2-viktor@daynix.com \
--to=viktor@daynix.com \
--cc=david@redhat.com \
--cc=jasowang@redhat.com \
--cc=marcel.apfelbaum@gmail.com \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peterx@redhat.com \
--cc=philmd@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=yan@daynix.com \
--cc=yuri.benditovich@daynix.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).