From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-arm@nongnu.org, qemu-devel@nongnu.org
Cc: Beniamino Galvani <b.galvani@gmail.com>,
Strahinja Jankovic <strahinja.p.jankovic@gmail.com>,
qemu-stable@nongnu.org
Subject: [PATCH 2/2] hw/net/allwinner-sun8i-emac: Correctly byteswap descriptor fields
Date: Mon, 24 Apr 2023 17:50:53 +0100 [thread overview]
Message-ID: <20230424165053.1428857-3-peter.maydell@linaro.org> (raw)
In-Reply-To: <20230424165053.1428857-1-peter.maydell@linaro.org>
In allwinner-sun8i-emac we just read directly from guest memory into
a host FrameDescriptor struct and back. This only works on
little-endian hosts. Reading and writing of descriptors is already
abstracted into functions; make those functions also handle the
byte-swapping so that TransferDescriptor structs as seen by the rest
of the code are always in host-order, and fix two places that were
doing ad-hoc descriptor reading without using the functions.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/net/allwinner-sun8i-emac.c | 22 +++++++++++++++-------
1 file changed, 15 insertions(+), 7 deletions(-)
diff --git a/hw/net/allwinner-sun8i-emac.c b/hw/net/allwinner-sun8i-emac.c
index b861d8ff352..fac4405f452 100644
--- a/hw/net/allwinner-sun8i-emac.c
+++ b/hw/net/allwinner-sun8i-emac.c
@@ -350,8 +350,13 @@ static void allwinner_sun8i_emac_get_desc(AwSun8iEmacState *s,
FrameDescriptor *desc,
uint32_t phys_addr)
{
- dma_memory_read(&s->dma_as, phys_addr, desc, sizeof(*desc),
+ uint32_t desc_words[4];
+ dma_memory_read(&s->dma_as, phys_addr, &desc_words, sizeof(desc_words),
MEMTXATTRS_UNSPECIFIED);
+ desc->status = le32_to_cpu(desc_words[0]);
+ desc->status2 = le32_to_cpu(desc_words[1]);
+ desc->addr = le32_to_cpu(desc_words[2]);
+ desc->next = le32_to_cpu(desc_words[3]);
}
static uint32_t allwinner_sun8i_emac_next_desc(AwSun8iEmacState *s,
@@ -400,10 +405,15 @@ static uint32_t allwinner_sun8i_emac_tx_desc(AwSun8iEmacState *s,
}
static void allwinner_sun8i_emac_flush_desc(AwSun8iEmacState *s,
- FrameDescriptor *desc,
+ const FrameDescriptor *desc,
uint32_t phys_addr)
{
- dma_memory_write(&s->dma_as, phys_addr, desc, sizeof(*desc),
+ uint32_t desc_words[4];
+ desc_words[0] = cpu_to_le32(desc->status);
+ desc_words[1] = cpu_to_le32(desc->status2);
+ desc_words[2] = cpu_to_le32(desc->addr);
+ desc_words[3] = cpu_to_le32(desc->next);
+ dma_memory_write(&s->dma_as, phys_addr, &desc_words, sizeof(desc_words),
MEMTXATTRS_UNSPECIFIED);
}
@@ -638,8 +648,7 @@ static uint64_t allwinner_sun8i_emac_read(void *opaque, hwaddr offset,
break;
case REG_TX_CUR_BUF: /* Transmit Current Buffer */
if (s->tx_desc_curr != 0) {
- dma_memory_read(&s->dma_as, s->tx_desc_curr, &desc, sizeof(desc),
- MEMTXATTRS_UNSPECIFIED);
+ allwinner_sun8i_emac_get_desc(s, &desc, s->tx_desc_curr);
value = desc.addr;
} else {
value = 0;
@@ -652,8 +661,7 @@ static uint64_t allwinner_sun8i_emac_read(void *opaque, hwaddr offset,
break;
case REG_RX_CUR_BUF: /* Receive Current Buffer */
if (s->rx_desc_curr != 0) {
- dma_memory_read(&s->dma_as, s->rx_desc_curr, &desc, sizeof(desc),
- MEMTXATTRS_UNSPECIFIED);
+ allwinner_sun8i_emac_get_desc(s, &desc, s->rx_desc_curr);
value = desc.addr;
} else {
value = 0;
--
2.34.1
next prev parent reply other threads:[~2023-04-24 16:52 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-24 16:50 [PATCH 0/2] arm: allwinner: fix endianness bugs in sdhost and sun8i-emac Peter Maydell
2023-04-24 16:50 ` [PATCH 1/2] hw/sd/allwinner-sdhost: Correctly byteswap descriptor fields Peter Maydell
2023-04-24 17:32 ` Thomas Huth
2023-04-24 17:42 ` Alex Bennée
2023-04-25 15:46 ` Philippe Mathieu-Daudé
2023-04-24 16:50 ` Peter Maydell [this message]
2023-04-24 17:36 ` [PATCH 2/2] hw/net/allwinner-sun8i-emac: " Thomas Huth
2023-04-24 17:44 ` Alex Bennée
2023-04-25 15:45 ` Philippe Mathieu-Daudé
2023-05-02 10:34 ` [PATCH 0/2] arm: allwinner: fix endianness bugs in sdhost and sun8i-emac Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230424165053.1428857-3-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=b.galvani@gmail.com \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-stable@nongnu.org \
--cc=strahinja.p.jankovic@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).