qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Cédric Le Goater" <clg@kaod.org>
To: qemu-arm@nongnu.org
Cc: qemu-devel@nongnu.org, "Peter Maydell" <peter.maydell@linaro.org>,
	"Joel Stanley" <joel@jms.id.au>,
	"Andrew Jeffery" <andrew@aj.id.au>,
	"Cédric Le Goater" <clg@kaod.org>
Subject: [PATCH 02/12] aspeed: Introduce a boot_rom region at the machine level
Date: Mon,  8 May 2023 09:58:49 +0200	[thread overview]
Message-ID: <20230508075859.3326566-3-clg@kaod.org> (raw)
In-Reply-To: <20230508075859.3326566-1-clg@kaod.org>

This should also avoid Coverity to report a memory leak warning when
the QEMU process exits. See CID 1508061.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
 hw/arm/aspeed.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index 0b29028fe1..b654513f35 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -40,6 +40,7 @@ struct AspeedMachineState {
     /* Public */
 
     AspeedSoCState soc;
+    MemoryRegion boot_rom;
     bool mmio_exec;
     char *fmc_model;
     char *spi_model;
@@ -275,15 +276,15 @@ static void write_boot_rom(BlockBackend *blk, hwaddr addr, size_t rom_size,
  * Create a ROM and copy the flash contents at the expected address
  * (0x0). Boots faster than execute-in-place.
  */
-static void aspeed_install_boot_rom(AspeedSoCState *soc, BlockBackend *blk,
+static void aspeed_install_boot_rom(AspeedMachineState *bmc, BlockBackend *blk,
                                     uint64_t rom_size)
 {
-    MemoryRegion *boot_rom = g_new(MemoryRegion, 1);
+    AspeedSoCState *soc = &bmc->soc;
 
-    memory_region_init_rom(boot_rom, NULL, "aspeed.boot_rom", rom_size,
+    memory_region_init_rom(&bmc->boot_rom, NULL, "aspeed.boot_rom", rom_size,
                            &error_abort);
     memory_region_add_subregion_overlap(&soc->spi_boot_container, 0,
-                                        boot_rom, 1);
+                                        &bmc->boot_rom, 1);
     write_boot_rom(blk, ASPEED_SOC_SPI_BOOT_ADDR, rom_size, &error_abort);
 }
 
@@ -431,8 +432,7 @@ static void aspeed_machine_init(MachineState *machine)
 
         if (mtd0) {
             uint64_t rom_size = memory_region_size(&bmc->soc.spi_boot);
-            aspeed_install_boot_rom(&bmc->soc, blk_by_legacy_dinfo(mtd0),
-                                    rom_size);
+            aspeed_install_boot_rom(bmc, blk_by_legacy_dinfo(mtd0), rom_size);
         }
     }
 
-- 
2.40.0



  parent reply	other threads:[~2023-05-08  8:00 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-08  7:58 [PATCH 00/12] aspeed: fixes and extensions Cédric Le Goater
2023-05-08  7:58 ` [PATCH 01/12] aspeed/hace: Initialize g_autofree pointer Cédric Le Goater
2023-05-08 14:28   ` Francisco Iglesias
2023-05-30 21:30   ` Philippe Mathieu-Daudé
2023-05-08  7:58 ` Cédric Le Goater [this message]
2023-05-08 14:27   ` [PATCH 02/12] aspeed: Introduce a boot_rom region at the machine level Francisco Iglesias
2023-05-30 21:28   ` Philippe Mathieu-Daudé
2023-05-08  7:58 ` [PATCH 03/12] aspeed: Use the boot_rom region of the fby35 machine Cédric Le Goater
2023-05-30 21:27   ` Philippe Mathieu-Daudé
2023-05-31  5:57     ` Cédric Le Goater
2023-05-08  7:58 ` [PATCH 04/12] hw/ssi: Add an "addr" property to SSIPeripheral Cédric Le Goater
2023-05-30 20:33   ` Philippe Mathieu-Daudé
2023-05-31  5:58     ` Cédric Le Goater
2023-05-08  7:58 ` [PATCH 05/12] hw/ssi: Introduce a ssi_get_cs() helper Cédric Le Goater
2023-05-30 20:34   ` Philippe Mathieu-Daudé
2023-05-30 21:15     ` Philippe Mathieu-Daudé
2023-05-31  5:59       ` Cédric Le Goater
2023-05-31  6:17         ` Philippe Mathieu-Daudé
2023-05-31  6:36           ` Cédric Le Goater
2023-05-31  7:39             ` Philippe Mathieu-Daudé
2023-06-05  5:57               ` Bernhard Beschow
2023-06-05 16:21                 ` Cédric Le Goater
2023-05-31  5:58     ` Cédric Le Goater
2023-05-08  7:58 ` [PATCH 06/12] aspeed/smc: Wire CS lines at reset Cédric Le Goater
2023-05-30 20:56   ` Philippe Mathieu-Daudé
2023-05-31  6:14     ` Cédric Le Goater
2023-05-08  7:58 ` [PATCH 07/12] hw/ssi: Check for duplicate addresses Cédric Le Goater
2023-05-30 21:05   ` Philippe Mathieu-Daudé
2023-05-31  6:20     ` Cédric Le Goater
2023-05-08  7:58 ` [PATCH 08/12] aspeed: Create flash devices only when defaults are enabled Cédric Le Goater
2023-05-08  7:58 ` [PATCH 09/12] m25p80: Introduce an helper to retrieve the BlockBackend of a device Cédric Le Goater
2023-05-30 21:14   ` Philippe Mathieu-Daudé
2023-05-31  6:48     ` Cédric Le Goater
2023-05-31  7:47       ` Philippe Mathieu-Daudé
2023-05-08  7:58 ` [PATCH 10/12] aspeed: Get the BlockBackend of FMC0 from the flash device Cédric Le Goater
2023-05-30 21:08   ` Philippe Mathieu-Daudé
2023-05-08  7:58 ` [PATCH 11/12] aspeed: Introduce a "uart" machine option Cédric Le Goater
2023-05-30 21:22   ` Philippe Mathieu-Daudé
2023-05-31  6:28     ` Cédric Le Goater
2023-05-31  7:50       ` Philippe Mathieu-Daudé
2023-05-31  8:47         ` Cédric Le Goater
2023-05-08  7:58 ` [PATCH 12/12] target/arm: Allow users to set the number of VFP registers Cédric Le Goater
2023-05-30 15:03 ` [PATCH 00/12] aspeed: fixes and extensions Cédric Le Goater

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230508075859.3326566-3-clg@kaod.org \
    --to=clg@kaod.org \
    --cc=andrew@aj.id.au \
    --cc=joel@jms.id.au \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).