From: Ilya Leoshkevich <iii@linux.ibm.com>
To: "Alex Bennée" <alex.bennee@linaro.org>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Laurent Vivier" <laurent@vivier.eu>
Cc: "Dominik 'Disconnect3d' Czarnota" <dominik.b.czarnota@gmail.com>,
Christian Borntraeger <borntraeger@linux.ibm.com>,
Andreas Arnez <arnez@linux.ibm.com>,
qemu-devel@nongnu.org, Ilya Leoshkevich <iii@linux.ibm.com>
Subject: [PATCH RESEND 1/6] linux-user: Expose do_guest_openat() and do_guest_readlink()
Date: Wed, 10 May 2023 22:26:49 +0200 [thread overview]
Message-ID: <20230510202654.225689-2-iii@linux.ibm.com> (raw)
In-Reply-To: <20230510202654.225689-1-iii@linux.ibm.com>
These functions will be required by the GDB stub in order to provide
the guest view of /proc to GDB.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
---
linux-user/qemu.h | 3 +++
linux-user/syscall.c | 54 ++++++++++++++++++++++++++++----------------
2 files changed, 38 insertions(+), 19 deletions(-)
diff --git a/linux-user/qemu.h b/linux-user/qemu.h
index e2e93fbd1d5..08bcdd7b7c5 100644
--- a/linux-user/qemu.h
+++ b/linux-user/qemu.h
@@ -165,6 +165,9 @@ typedef struct TaskState {
} TaskState;
abi_long do_brk(abi_ulong new_brk);
+int do_guest_openat(CPUArchState *cpu_env, int dirfd, const char *pathname,
+ int flags, mode_t mode);
+ssize_t do_guest_readlink(const char *pathname, char *buf, size_t bufsiz);
/* user access */
diff --git a/linux-user/syscall.c b/linux-user/syscall.c
index 69f740ff98c..80dbcfec426 100644
--- a/linux-user/syscall.c
+++ b/linux-user/syscall.c
@@ -8317,7 +8317,8 @@ static int open_hardware(CPUArchState *cpu_env, int fd)
}
#endif
-static int do_openat(CPUArchState *cpu_env, int dirfd, const char *pathname, int flags, mode_t mode)
+int do_guest_openat(CPUArchState *cpu_env, int dirfd, const char *pathname,
+ int flags, mode_t mode)
{
struct fake_open {
const char *filename;
@@ -8388,6 +8389,36 @@ static int do_openat(CPUArchState *cpu_env, int dirfd, const char *pathname, int
return safe_openat(dirfd, path(pathname), flags, mode);
}
+ssize_t do_guest_readlink(const char *pathname, char *buf, size_t bufsiz)
+{
+ ssize_t ret;
+
+ if (!pathname || !buf) {
+ errno = EFAULT;
+ return -1;
+ }
+
+ if (!bufsiz) {
+ /* Short circuit this for the magic exe check. */
+ errno = EINVAL;
+ return -1;
+ }
+
+ if (is_proc_myself((const char *)pathname, "exe")) {
+ /*
+ * Don't worry about sign mismatch as earlier mapping
+ * logic would have thrown a bad address error.
+ */
+ ret = MIN(strlen(exec_path), bufsiz);
+ /* We cannot NUL terminate the string. */
+ memcpy(buf, exec_path, ret);
+ } else {
+ ret = readlink(path(pathname), buf, bufsiz);
+ }
+
+ return ret;
+}
+
static int do_execveat(CPUArchState *cpu_env, int dirfd,
abi_long pathname, abi_long guest_argp,
abi_long guest_envp, int flags)
@@ -8850,7 +8881,7 @@ static abi_long do_syscall1(CPUArchState *cpu_env, int num, abi_long arg1,
case TARGET_NR_open:
if (!(p = lock_user_string(arg1)))
return -TARGET_EFAULT;
- ret = get_errno(do_openat(cpu_env, AT_FDCWD, p,
+ ret = get_errno(do_guest_openat(cpu_env, AT_FDCWD, p,
target_to_host_bitmask(arg2, fcntl_flags_tbl),
arg3));
fd_trans_unregister(ret);
@@ -8860,7 +8891,7 @@ static abi_long do_syscall1(CPUArchState *cpu_env, int num, abi_long arg1,
case TARGET_NR_openat:
if (!(p = lock_user_string(arg2)))
return -TARGET_EFAULT;
- ret = get_errno(do_openat(cpu_env, arg1, p,
+ ret = get_errno(do_guest_openat(cpu_env, arg1, p,
target_to_host_bitmask(arg3, fcntl_flags_tbl),
arg4));
fd_trans_unregister(ret);
@@ -10031,22 +10062,7 @@ static abi_long do_syscall1(CPUArchState *cpu_env, int num, abi_long arg1,
void *p2;
p = lock_user_string(arg1);
p2 = lock_user(VERIFY_WRITE, arg2, arg3, 0);
- if (!p || !p2) {
- ret = -TARGET_EFAULT;
- } else if (!arg3) {
- /* Short circuit this for the magic exe check. */
- ret = -TARGET_EINVAL;
- } else if (is_proc_myself((const char *)p, "exe")) {
- /*
- * Don't worry about sign mismatch as earlier mapping
- * logic would have thrown a bad address error.
- */
- ret = MIN(strlen(exec_path), arg3);
- /* We cannot NUL terminate the string. */
- memcpy(p2, exec_path, ret);
- } else {
- ret = get_errno(readlink(path(p), p2, arg3));
- }
+ ret = get_errno(do_guest_readlink(p, p2, arg3));
unlock_user(p2, arg2, ret);
unlock_user(p, arg1, 0);
}
--
2.40.1
next prev parent reply other threads:[~2023-05-10 20:28 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-10 20:26 [PATCH RESEND 0/6] gdbstub: Add support for info proc mappings Ilya Leoshkevich
2023-05-10 20:26 ` Ilya Leoshkevich [this message]
2023-05-24 9:35 ` [PATCH RESEND 1/6] linux-user: Expose do_guest_openat() and do_guest_readlink() Alex Bennée
2023-05-10 20:26 ` [PATCH RESEND 2/6] gdbstub: Expose gdb_get_process() and gdb_get_first_cpu_in_process() Ilya Leoshkevich
2023-05-24 9:37 ` Alex Bennée
2023-05-10 20:26 ` [PATCH RESEND 3/6] gdbstub: Report the actual qemu-user pid Ilya Leoshkevich
2023-05-24 9:41 ` Alex Bennée
2023-05-10 20:26 ` [PATCH RESEND 4/6] gdbstub: Add support for info proc mappings Ilya Leoshkevich
2023-05-10 20:26 ` [PATCH RESEND 5/6] docs: Document security implications of debugging Ilya Leoshkevich
2023-05-24 10:27 ` Alex Bennée
2023-05-24 11:39 ` Dominik Czarnota
2023-05-10 20:26 ` [PATCH RESEND 6/6] tests/tcg: Add a test for info proc mappings Ilya Leoshkevich
2023-05-24 9:01 ` PING: [PATCH RESEND 0/6] gdbstub: Add support " Ilya Leoshkevich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230510202654.225689-2-iii@linux.ibm.com \
--to=iii@linux.ibm.com \
--cc=alex.bennee@linaro.org \
--cc=arnez@linux.ibm.com \
--cc=borntraeger@linux.ibm.com \
--cc=dominik.b.czarnota@gmail.com \
--cc=laurent@vivier.eu \
--cc=philmd@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).