From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>
Subject: [PULL 09/80] meson: Detect atomic128 support with optimization
Date: Tue, 16 May 2023 12:40:34 -0700 [thread overview]
Message-ID: <20230516194145.1749305-10-richard.henderson@linaro.org> (raw)
In-Reply-To: <20230516194145.1749305-1-richard.henderson@linaro.org>
There is an edge condition prior to gcc13 for which optimization
is required to generate 16-byte atomic sequences. Detect this.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
meson.build | 52 ++++++++++++++++++++++------------
accel/tcg/ldst_atomicity.c.inc | 29 ++++++++++++++++---
2 files changed, 59 insertions(+), 22 deletions(-)
diff --git a/meson.build b/meson.build
index d3cf48960b..61de8199cb 100644
--- a/meson.build
+++ b/meson.build
@@ -2249,23 +2249,21 @@ config_host_data.set('HAVE_BROKEN_SIZE_MAX', not cc.compiles('''
return printf("%zu", SIZE_MAX);
}''', args: ['-Werror']))
-atomic_test = '''
+# See if 64-bit atomic operations are supported.
+# Note that without __atomic builtins, we can only
+# assume atomic loads/stores max at pointer size.
+config_host_data.set('CONFIG_ATOMIC64', cc.links('''
#include <stdint.h>
int main(void)
{
- @0@ x = 0, y = 0;
+ uint64_t x = 0, y = 0;
y = __atomic_load_n(&x, __ATOMIC_RELAXED);
__atomic_store_n(&x, y, __ATOMIC_RELAXED);
__atomic_compare_exchange_n(&x, &y, x, 0, __ATOMIC_RELAXED, __ATOMIC_RELAXED);
__atomic_exchange_n(&x, y, __ATOMIC_RELAXED);
__atomic_fetch_add(&x, y, __ATOMIC_RELAXED);
return 0;
- }'''
-
-# See if 64-bit atomic operations are supported.
-# Note that without __atomic builtins, we can only
-# assume atomic loads/stores max at pointer size.
-config_host_data.set('CONFIG_ATOMIC64', cc.links(atomic_test.format('uint64_t')))
+ }'''))
has_int128 = cc.links('''
__int128_t a;
@@ -2283,21 +2281,39 @@ if has_int128
# "do we have 128-bit atomics which are handled inline and specifically not
# via libatomic". The reason we can't use libatomic is documented in the
# comment starting "GCC is a house divided" in include/qemu/atomic128.h.
- has_atomic128 = cc.links(atomic_test.format('unsigned __int128'))
+ # We only care about these operations on 16-byte aligned pointers, so
+ # force 16-byte alignment of the pointer, which may be greater than
+ # __alignof(unsigned __int128) for the host.
+ atomic_test_128 = '''
+ int main(int ac, char **av) {
+ unsigned __int128 *p = __builtin_assume_aligned(av[ac - 1], sizeof(16));
+ p[1] = __atomic_load_n(&p[0], __ATOMIC_RELAXED);
+ __atomic_store_n(&p[2], p[3], __ATOMIC_RELAXED);
+ __atomic_compare_exchange_n(&p[4], &p[5], p[6], 0, __ATOMIC_RELAXED, __ATOMIC_RELAXED);
+ return 0;
+ }'''
+ has_atomic128 = cc.links(atomic_test_128)
config_host_data.set('CONFIG_ATOMIC128', has_atomic128)
if not has_atomic128
- has_cmpxchg128 = cc.links('''
- int main(void)
- {
- unsigned __int128 x = 0, y = 0;
- __sync_val_compare_and_swap_16(&x, y, x);
- return 0;
- }
- ''')
+ # Even with __builtin_assume_aligned, the above test may have failed
+ # without optimization enabled. Try again with optimizations locally
+ # enabled for the function. See
+ # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=107389
+ has_atomic128_opt = cc.links('__attribute__((optimize("O1")))' + atomic_test_128)
+ config_host_data.set('CONFIG_ATOMIC128_OPT', has_atomic128_opt)
- config_host_data.set('CONFIG_CMPXCHG128', has_cmpxchg128)
+ if not has_atomic128_opt
+ config_host_data.set('CONFIG_CMPXCHG128', cc.links('''
+ int main(void)
+ {
+ unsigned __int128 x = 0, y = 0;
+ __sync_val_compare_and_swap_16(&x, y, x);
+ return 0;
+ }
+ '''))
+ endif
endif
endif
diff --git a/accel/tcg/ldst_atomicity.c.inc b/accel/tcg/ldst_atomicity.c.inc
index ce73b32def..ba5db7c366 100644
--- a/accel/tcg/ldst_atomicity.c.inc
+++ b/accel/tcg/ldst_atomicity.c.inc
@@ -16,6 +16,23 @@
#endif
#define HAVE_al8_fast (ATOMIC_REG_SIZE >= 8)
+/*
+ * If __alignof(unsigned __int128) < 16, GCC may refuse to inline atomics
+ * that are supported by the host, e.g. s390x. We can force the pointer to
+ * have our known alignment with __builtin_assume_aligned, however prior to
+ * GCC 13 that was only reliable with optimization enabled. See
+ * https://gcc.gnu.org/bugzilla/show_bug.cgi?id=107389
+ */
+#if defined(CONFIG_ATOMIC128_OPT)
+# if !defined(__OPTIMIZE__)
+# define ATTRIBUTE_ATOMIC128_OPT __attribute__((optimize("O1")))
+# endif
+# define CONFIG_ATOMIC128
+#endif
+#ifndef ATTRIBUTE_ATOMIC128_OPT
+# define ATTRIBUTE_ATOMIC128_OPT
+#endif
+
#if defined(CONFIG_ATOMIC128)
# define HAVE_al16_fast true
#else
@@ -152,7 +169,8 @@ static inline uint64_t load_atomic8(void *pv)
*
* Atomically load 16 aligned bytes from @pv.
*/
-static inline Int128 load_atomic16(void *pv)
+static inline Int128 ATTRIBUTE_ATOMIC128_OPT
+load_atomic16(void *pv)
{
#ifdef CONFIG_ATOMIC128
__uint128_t *p = __builtin_assume_aligned(pv, 16);
@@ -356,7 +374,8 @@ static uint64_t load_atom_extract_al16_or_exit(CPUArchState *env, uintptr_t ra,
* cross an 16-byte boundary then the access must be 16-byte atomic,
* otherwise the access must be 8-byte atomic.
*/
-static inline uint64_t load_atom_extract_al16_or_al8(void *pv, int s)
+static inline uint64_t ATTRIBUTE_ATOMIC128_OPT
+load_atom_extract_al16_or_al8(void *pv, int s)
{
#if defined(CONFIG_ATOMIC128)
uintptr_t pi = (uintptr_t)pv;
@@ -692,7 +711,8 @@ static inline void store_atomic8(void *pv, uint64_t val)
*
* Atomically store 16 aligned bytes to @pv.
*/
-static inline void store_atomic16(void *pv, Int128Alias val)
+static inline void ATTRIBUTE_ATOMIC128_OPT
+store_atomic16(void *pv, Int128Alias val)
{
#if defined(CONFIG_ATOMIC128)
__uint128_t *pu = __builtin_assume_aligned(pv, 16);
@@ -790,7 +810,8 @@ static void store_atom_insert_al8(uint64_t *p, uint64_t val, uint64_t msk)
*
* Atomically store @val to @p masked by @msk.
*/
-static void store_atom_insert_al16(Int128 *ps, Int128Alias val, Int128Alias msk)
+static void ATTRIBUTE_ATOMIC128_OPT
+store_atom_insert_al16(Int128 *ps, Int128Alias val, Int128Alias msk)
{
#if defined(CONFIG_ATOMIC128)
__uint128_t *pu, old, new;
--
2.34.1
next prev parent reply other threads:[~2023-05-16 19:59 UTC|newest]
Thread overview: 84+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-16 19:40 [PULL 00/80] tcg patch queue Richard Henderson
2023-05-16 19:40 ` [PULL 01/80] tcg/i386: Set P_REXW in tcg_out_addi_ptr Richard Henderson
2023-05-16 19:40 ` [PULL 02/80] include/exec/memop: Add MO_ATOM_* Richard Henderson
2023-05-16 19:40 ` [PULL 03/80] accel/tcg: Honor atomicity of loads Richard Henderson
2023-05-16 19:40 ` [PULL 04/80] accel/tcg: Honor atomicity of stores Richard Henderson
2023-05-16 19:40 ` [PULL 05/80] tcg: Unify helper_{be,le}_{ld,st}* Richard Henderson
2023-05-16 19:40 ` [PULL 06/80] accel/tcg: Implement helper_{ld,st}*_mmu for user-only Richard Henderson
2023-05-16 19:40 ` [PULL 07/80] tcg/tci: Use " Richard Henderson
2023-05-16 19:40 ` [PULL 08/80] tcg: Add 128-bit guest memory primitives Richard Henderson
2023-05-16 19:40 ` Richard Henderson [this message]
2023-05-16 19:40 ` [PULL 10/80] tcg/i386: Add have_atomic16 Richard Henderson
2023-05-16 19:40 ` [PULL 11/80] tcg/aarch64: Detect have_lse, have_lse2 for linux Richard Henderson
2023-05-16 19:40 ` [PULL 12/80] tcg/aarch64: Detect have_lse, have_lse2 for darwin Richard Henderson
2023-05-16 19:40 ` [PULL 13/80] tcg/i386: Use full load/store helpers in user-only mode Richard Henderson
2023-05-16 19:40 ` [PULL 14/80] tcg/aarch64: " Richard Henderson
2023-05-16 19:40 ` [PULL 15/80] tcg/ppc: " Richard Henderson
2023-05-16 19:40 ` [PULL 16/80] tcg/loongarch64: " Richard Henderson
2023-05-16 19:40 ` [PULL 17/80] tcg/riscv: " Richard Henderson
2023-05-16 19:40 ` [PULL 18/80] tcg/arm: Adjust constraints on qemu_ld/st Richard Henderson
2023-05-16 19:40 ` [PULL 19/80] tcg/arm: Use full load/store helpers in user-only mode Richard Henderson
2023-05-16 19:40 ` [PULL 20/80] tcg/mips: " Richard Henderson
2023-05-16 19:40 ` [PULL 21/80] tcg/s390x: " Richard Henderson
2023-05-16 19:40 ` [PULL 22/80] tcg/sparc64: Allocate %g2 as a third temporary Richard Henderson
2023-05-16 19:40 ` [PULL 23/80] tcg/sparc64: Rename tcg_out_movi_imm13 to tcg_out_movi_s13 Richard Henderson
2023-05-16 19:40 ` [PULL 24/80] target/sparc64: Remove tcg_out_movi_s13 case from tcg_out_movi_imm32 Richard Henderson
2023-05-16 19:40 ` [PULL 25/80] tcg/sparc64: Rename tcg_out_movi_imm32 to tcg_out_movi_u32 Richard Henderson
2023-05-16 19:40 ` [PULL 26/80] tcg/sparc64: Split out tcg_out_movi_s32 Richard Henderson
2023-05-16 19:40 ` [PULL 27/80] tcg/sparc64: Use standard slow path for softmmu Richard Henderson
2023-05-16 19:40 ` [PULL 28/80] accel/tcg: Remove helper_unaligned_{ld,st} Richard Henderson
2023-05-16 19:40 ` [PULL 29/80] tcg/loongarch64: Check the host supports unaligned accesses Richard Henderson
2023-05-16 19:40 ` [PULL 30/80] tcg/loongarch64: Support softmmu " Richard Henderson
2023-05-16 19:40 ` [PULL 31/80] tcg/riscv: " Richard Henderson
2023-05-16 19:40 ` [PULL 32/80] tcg: Introduce tcg_target_has_memory_bswap Richard Henderson
2023-05-16 19:40 ` [PULL 33/80] tcg: Add INDEX_op_qemu_{ld,st}_i128 Richard Henderson
2023-05-16 19:40 ` [PULL 34/80] tcg: Introduce tcg_out_movext3 Richard Henderson
2023-05-16 19:41 ` [PULL 35/80] tcg: Merge tcg_out_helper_load_regs into caller Richard Henderson
2023-05-16 19:41 ` [PULL 36/80] tcg: Support TCG_TYPE_I128 in tcg_out_{ld, st}_helper_{args, ret} Richard Henderson
2023-05-16 19:41 ` [PULL 37/80] tcg: Introduce atom_and_align_for_opc Richard Henderson
2023-05-16 19:41 ` [PULL 38/80] tcg/i386: Use atom_and_align_for_opc Richard Henderson
2023-05-16 19:41 ` [PULL 39/80] tcg/aarch64: " Richard Henderson
2023-05-16 19:41 ` [PULL 40/80] tcg/arm: " Richard Henderson
2023-05-16 19:41 ` [PULL 41/80] tcg/loongarch64: " Richard Henderson
2023-05-16 19:41 ` [PULL 42/80] tcg/mips: " Richard Henderson
2023-05-16 19:41 ` [PULL 43/80] tcg/ppc: " Richard Henderson
2023-05-16 19:41 ` [PULL 44/80] tcg/riscv: " Richard Henderson
2023-05-16 19:41 ` [PULL 45/80] tcg/s390x: " Richard Henderson
2023-05-16 19:41 ` [PULL 46/80] tcg/sparc64: " Richard Henderson
2023-05-16 19:41 ` [PULL 47/80] tcg/i386: Honor 64-bit atomicity in 32-bit mode Richard Henderson
2023-05-16 19:41 ` [PULL 48/80] tcg/i386: Support 128-bit load/store with have_atomic16 Richard Henderson
2023-05-16 19:41 ` [PULL 49/80] tcg/aarch64: Rename temporaries Richard Henderson
2023-05-16 19:41 ` [PULL 50/80] tcg/aarch64: Support 128-bit load/store Richard Henderson
2023-05-16 19:41 ` [PULL 51/80] tcg/ppc: " Richard Henderson
2023-05-16 19:41 ` [PULL 52/80] tcg/s390x: " Richard Henderson
2023-05-16 19:41 ` [PULL 53/80] tcg: Split out memory ops to tcg-op-ldst.c Richard Henderson
2023-05-16 19:41 ` [PULL 54/80] tcg: Widen gen_insn_data to uint64_t Richard Henderson
2023-05-16 19:41 ` [PULL 55/80] accel/tcg: Widen tcg-ldst.h addresses " Richard Henderson
2023-05-16 19:41 ` [PULL 56/80] tcg: Widen helper_{ld,st}_i128 " Richard Henderson
2023-05-16 19:41 ` [PULL 57/80] tcg: Widen helper_atomic_* " Richard Henderson
2023-05-16 19:41 ` [PULL 58/80] tcg: Widen tcg_gen_code pc_start argument " Richard Henderson
2023-05-16 19:41 ` [PULL 59/80] accel/tcg: Merge gen_mem_wrapped with plugin_gen_empty_mem_callback Richard Henderson
2023-05-16 19:41 ` [PULL 60/80] accel/tcg: Merge do_gen_mem_cb into caller Richard Henderson
2023-05-16 19:41 ` [PULL 61/80] tcg: Reduce copies for plugin_gen_mem_callbacks Richard Henderson
2023-05-16 19:41 ` [PULL 62/80] accel/tcg: Widen plugin_gen_empty_mem_callback to i64 Richard Henderson
2023-05-18 13:22 ` Peter Maydell
2023-05-16 19:41 ` [PULL 63/80] tcg: Add addr_type to TCGContext Richard Henderson
2023-05-16 19:41 ` [PULL 64/80] tcg: Remove TCGv from tcg_gen_qemu_{ld,st}_* Richard Henderson
2023-05-16 19:41 ` [PULL 65/80] tcg: Remove TCGv from tcg_gen_atomic_* Richard Henderson
2023-05-16 19:41 ` [PULL 66/80] tcg: Split INDEX_op_qemu_{ld, st}* for guest address size Richard Henderson
2023-05-16 19:41 ` [PULL 67/80] tcg/tci: Elimnate TARGET_LONG_BITS, target_ulong Richard Henderson
2023-05-16 19:41 ` [PULL 68/80] tcg/i386: Always enable TCG_TARGET_HAS_extr[lh]_i64_i32 Richard Henderson
2023-05-16 19:41 ` [PULL 69/80] tcg/i386: Conditionalize tcg_out_extu_i32_i64 Richard Henderson
2023-05-16 19:41 ` [PULL 70/80] tcg/i386: Adjust type of tlb_mask Richard Henderson
2023-05-16 19:41 ` [PULL 71/80] tcg/i386: Remove TARGET_LONG_BITS, TCG_TYPE_TL Richard Henderson
2023-05-16 19:41 ` [PULL 72/80] tcg/arm: Remove TARGET_LONG_BITS Richard Henderson
2023-05-16 19:41 ` [PULL 73/80] tcg/aarch64: Remove USE_GUEST_BASE Richard Henderson
2023-05-16 19:41 ` [PULL 74/80] tcg/aarch64: Remove TARGET_LONG_BITS, TCG_TYPE_TL Richard Henderson
2023-05-16 19:41 ` [PULL 75/80] tcg/loongarch64: " Richard Henderson
2023-05-16 19:41 ` [PULL 76/80] tcg/mips: " Richard Henderson
2023-05-16 19:41 ` [PULL 77/80] tcg: " Richard Henderson
2023-05-16 19:41 ` [PULL 78/80] tcg: Add page_bits and page_mask to TCGContext Richard Henderson
2023-05-16 19:41 ` [PULL 79/80] tcg: Add tlb_dyn_max_bits " Richard Henderson
2023-05-16 19:41 ` [PULL 80/80] tcg: Split out exec/user/guest-base.h Richard Henderson
2023-05-17 15:11 ` [PULL 00/80] tcg patch queue Peter Maydell
2023-05-17 19:16 ` Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230516194145.1749305-10-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).