qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: Gavin Shan <gshan@redhat.com>, Peter Xu <peterx@redhat.com>,
	Zhenyu Zhang <zhenyzha@redhat.com>
Subject: [PULL 12/68] kvm: Add helper kvm_dirty_ring_init()
Date: Wed, 17 May 2023 19:44:24 +0200	[thread overview]
Message-ID: <20230517174520.887405-13-pbonzini@redhat.com> (raw)
In-Reply-To: <20230517174520.887405-1-pbonzini@redhat.com>

From: Gavin Shan <gshan@redhat.com>

Due to multiple capabilities associated with the dirty ring for different
architectures: KVM_CAP_DIRTY_{LOG_RING, LOG_RING_ACQ_REL} for x86 and
arm64 separately. There will be more to be done in order to support the
dirty ring for arm64.

Lets add helper kvm_dirty_ring_init() to enable the dirty ring. With this,
the code looks a bit clean.

No functional change intended.

Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Message-Id: <20230509022122.20888-4-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 accel/kvm/kvm-all.c | 76 ++++++++++++++++++++++++++++-----------------
 1 file changed, 47 insertions(+), 29 deletions(-)

diff --git a/accel/kvm/kvm-all.c b/accel/kvm/kvm-all.c
index c3aaabf304d7..5d0de9d0a8f8 100644
--- a/accel/kvm/kvm-all.c
+++ b/accel/kvm/kvm-all.c
@@ -1462,6 +1462,50 @@ static int kvm_dirty_ring_reaper_init(KVMState *s)
     return 0;
 }
 
+static int kvm_dirty_ring_init(KVMState *s)
+{
+    uint32_t ring_size = s->kvm_dirty_ring_size;
+    uint64_t ring_bytes = ring_size * sizeof(struct kvm_dirty_gfn);
+    int ret;
+
+    s->kvm_dirty_ring_size = 0;
+    s->kvm_dirty_ring_bytes = 0;
+
+    /* Bail if the dirty ring size isn't specified */
+    if (!ring_size) {
+        return 0;
+    }
+
+    /*
+     * Read the max supported pages. Fall back to dirty logging mode
+     * if the dirty ring isn't supported.
+     */
+    ret = kvm_vm_check_extension(s, KVM_CAP_DIRTY_LOG_RING);
+    if (ret <= 0) {
+        warn_report("KVM dirty ring not available, using bitmap method");
+        return 0;
+    }
+
+    if (ring_bytes > ret) {
+        error_report("KVM dirty ring size %" PRIu32 " too big "
+                     "(maximum is %ld).  Please use a smaller value.",
+                     ring_size, (long)ret / sizeof(struct kvm_dirty_gfn));
+        return -EINVAL;
+    }
+
+    ret = kvm_vm_enable_cap(s, KVM_CAP_DIRTY_LOG_RING, 0, ring_bytes);
+    if (ret) {
+        error_report("Enabling of KVM dirty ring failed: %s. "
+                     "Suggested minimum value is 1024.", strerror(-ret));
+        return -EIO;
+    }
+
+    s->kvm_dirty_ring_size = ring_size;
+    s->kvm_dirty_ring_bytes = ring_bytes;
+
+    return 0;
+}
+
 static void kvm_region_add(MemoryListener *listener,
                            MemoryRegionSection *section)
 {
@@ -2531,35 +2575,9 @@ static int kvm_init(MachineState *ms)
      * Enable KVM dirty ring if supported, otherwise fall back to
      * dirty logging mode
      */
-    if (s->kvm_dirty_ring_size > 0) {
-        uint64_t ring_bytes;
-
-        ring_bytes = s->kvm_dirty_ring_size * sizeof(struct kvm_dirty_gfn);
-
-        /* Read the max supported pages */
-        ret = kvm_vm_check_extension(s, KVM_CAP_DIRTY_LOG_RING);
-        if (ret > 0) {
-            if (ring_bytes > ret) {
-                error_report("KVM dirty ring size %" PRIu32 " too big "
-                             "(maximum is %ld).  Please use a smaller value.",
-                             s->kvm_dirty_ring_size,
-                             (long)ret / sizeof(struct kvm_dirty_gfn));
-                ret = -EINVAL;
-                goto err;
-            }
-
-            ret = kvm_vm_enable_cap(s, KVM_CAP_DIRTY_LOG_RING, 0, ring_bytes);
-            if (ret) {
-                error_report("Enabling of KVM dirty ring failed: %s. "
-                             "Suggested minimum value is 1024.", strerror(-ret));
-                goto err;
-            }
-
-            s->kvm_dirty_ring_bytes = ring_bytes;
-         } else {
-             warn_report("KVM dirty ring not available, using bitmap method");
-             s->kvm_dirty_ring_size = 0;
-        }
+    ret = kvm_dirty_ring_init(s);
+    if (ret < 0) {
+        goto err;
     }
 
     /*
-- 
2.40.1



  parent reply	other threads:[~2023-05-17 18:01 UTC|newest]

Thread overview: 80+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-17 17:44 [PULL 00/68] i386, build system, KVM changes for 2023-05-18 Paolo Bonzini
2023-05-17 17:44 ` [PULL 01/68] target/i386: add support for FLUSH_L1D feature Paolo Bonzini
2023-05-17 17:44 ` [PULL 02/68] target/i386: add support for FB_CLEAR feature Paolo Bonzini
2023-05-17 17:44 ` [PULL 03/68] target/i386: fix operand size for VCOMI/VUCOMI instructions Paolo Bonzini
2023-05-17 17:44 ` [PULL 04/68] target/i386: fix avx2 instructions vzeroall and vpermdq Paolo Bonzini
2023-05-17 17:44 ` [PULL 05/68] tests/tcg/i386: correct mask for VPERM2F128/VPERM2I128 Paolo Bonzini
2023-05-17 17:44 ` [PULL 06/68] target/i386: Fix and add some comments next to SSE/AVX instructions Paolo Bonzini
2023-05-17 17:44 ` [PULL 07/68] target/i386: Fix exception classes for " Paolo Bonzini
2023-05-17 17:44 ` [PULL 08/68] target/i386: Fix exception classes for MOVNTPS/MOVNTPD Paolo Bonzini
2023-05-17 17:44 ` [PULL 09/68] meson: Pass -j option to sphinx Paolo Bonzini
2023-05-17 17:44 ` [PULL 10/68] migration: Add last stage indicator to global dirty log Paolo Bonzini
2023-05-17 17:44 ` [PULL 11/68] kvm: Synchronize the backup bitmap in the last stage Paolo Bonzini
2023-05-17 17:44 ` Paolo Bonzini [this message]
2023-05-17 17:44 ` [PULL 13/68] kvm: Enable dirty ring for arm64 Paolo Bonzini
2023-05-17 17:44 ` [PULL 14/68] tcg: round-robin: do not use mb_read for rr_current_cpu Paolo Bonzini
2023-05-17 17:44 ` [PULL 15/68] coverity: the definitive COMPONENTS.md update Paolo Bonzini
2023-05-17 17:44 ` [PULL 16/68] scsi-generic: fix buffer overflow on block limits inquiry Paolo Bonzini
2023-05-17 17:44 ` [PULL 17/68] make: clean after distclean deletes source files Paolo Bonzini
2023-05-17 17:44 ` [PULL 18/68] python: shut up "pip install" during "make check-minreqs" Paolo Bonzini
2023-05-17 17:44 ` [PULL 19/68] python: update pylint configuration Paolo Bonzini
2023-05-17 17:44 ` [PULL 20/68] python: add mkvenv.py Paolo Bonzini
2023-05-17 17:44 ` [PULL 21/68] mkvenv: add better error message for broken or missing ensurepip Paolo Bonzini
2023-05-17 17:44 ` [PULL 22/68] mkvenv: add nested venv workaround Paolo Bonzini
2023-05-17 17:44 ` [PULL 23/68] mkvenv: add ensure subcommand Paolo Bonzini
2023-05-17 17:44 ` [PULL 24/68] mkvenv: add --diagnose option to explain "ensure" failures Paolo Bonzini
2023-05-17 17:44 ` [PULL 25/68] mkvenv: add console script entry point generation Paolo Bonzini
2023-05-17 17:44 ` [PULL 26/68] mkvenv: use pip's vendored distlib as a fallback Paolo Bonzini
2023-05-17 17:44 ` [PULL 27/68] mkvenv: avoid ensurepip if pip is installed Paolo Bonzini
2023-05-17 17:44 ` [PULL 28/68] mkvenv: work around broken pip installations on Debian 10 Paolo Bonzini
2023-05-17 17:44 ` [PULL 29/68] tests/docker: add python3-venv dependency Paolo Bonzini
2023-05-17 17:44 ` [PULL 30/68] tests/vm: Configure netbsd to use Python 3.10 Paolo Bonzini
2023-05-17 17:44 ` [PULL 31/68] tests/vm: add py310-expat to NetBSD Paolo Bonzini
2023-05-17 17:44 ` [PULL 32/68] python: add vendor.py utility Paolo Bonzini
2023-05-17 17:44 ` [PULL 33/68] configure: create a python venv unconditionally Paolo Bonzini
2023-05-17 17:44 ` [PULL 34/68] python/wheels: add vendored meson package Paolo Bonzini
2023-05-17 17:44 ` [PULL 35/68] configure: use 'mkvenv ensure meson' to bootstrap meson Paolo Bonzini
2023-05-17 17:44 ` [PULL 36/68] qemu.git: drop meson git submodule Paolo Bonzini
2023-05-17 17:44 ` [PULL 37/68] tests: Use configure-provided pyvenv for tests Paolo Bonzini
2023-05-17 17:44 ` [PULL 38/68] configure: move --enable-docs and --disable-docs back to configure Paolo Bonzini
2023-05-17 17:44 ` [PULL 39/68] configure: bootstrap sphinx with mkvenv Paolo Bonzini
2023-05-17 17:44 ` [PULL 40/68] configure: add --enable-pypi and --disable-pypi Paolo Bonzini
2023-05-17 17:44 ` [PULL 41/68] Python: Drop support for Python 3.6 Paolo Bonzini
2023-05-17 17:44 ` [PULL 42/68] configure: Add courtesy hint to Python version failure message Paolo Bonzini
2023-05-17 17:44 ` [PULL 43/68] mkvenv: mark command as required Paolo Bonzini
2023-05-17 17:44 ` [PULL 44/68] python: bump some of the dependencies Paolo Bonzini
2023-05-17 17:44 ` [PULL 45/68] meson: regenerate meson-buildoptions.sh Paolo Bonzini
2023-05-17 17:44 ` [PULL 46/68] meson: require 0.63.0 Paolo Bonzini
2023-05-17 17:44 ` [PULL 47/68] meson: use prefer_static option Paolo Bonzini
2023-05-17 17:45 ` [PULL 48/68] meson: remove static_kwargs Paolo Bonzini
2023-05-17 17:45 ` [PULL 49/68] meson: add more version numbers to the summary Paolo Bonzini
2023-05-17 17:45 ` [PULL 50/68] meson: drop unnecessary declare_dependency() Paolo Bonzini
2023-05-17 17:45 ` [PULL 51/68] build: move glib detection and workarounds to meson Paolo Bonzini
2023-05-17 17:45 ` [PULL 52/68] configure: remove pkg-config functions Paolo Bonzini
2023-05-17 17:45 ` [PULL 53/68] configure, meson: move --enable-modules to Meson Paolo Bonzini
2023-05-17 17:45 ` [PULL 54/68] meson: prepare move of QEMU_CFLAGS to meson Paolo Bonzini
2023-05-17 17:45 ` [PULL 55/68] build: move sanitizer tests " Paolo Bonzini
2023-05-17 17:45 ` [PULL 56/68] build: move SafeStack " Paolo Bonzini
2023-05-17 17:45 ` [PULL 57/68] build: move coroutine backend selection " Paolo Bonzini
2023-05-17 17:45 ` [PULL 58/68] build: move stack protector flag " Paolo Bonzini
2023-05-17 17:45 ` [PULL 59/68] build: move warning " Paolo Bonzini
2023-05-17 17:45 ` [PULL 60/68] build: move remaining compiler flag tests " Paolo Bonzini
2023-05-17 17:45 ` [PULL 61/68] build: move compiler version check " Paolo Bonzini
2023-05-17 17:45 ` [PULL 62/68] build: move --disable-debug-info " Paolo Bonzini
2023-05-17 17:45 ` [PULL 63/68] configure: remove compiler sanity check Paolo Bonzini
2023-05-17 18:48   ` Peter Maydell
2023-05-18  4:57     ` Paolo Bonzini
2023-05-17 17:45 ` [PULL 64/68] configure: do not rerun the tests with -Werror Paolo Bonzini
2023-05-17 17:45 ` [PULL 65/68] configure: remove unnecessary mkdir Paolo Bonzini
2023-05-17 17:45 ` [PULL 66/68] configure: reorder option parsing code Paolo Bonzini
2023-05-17 17:45 ` [PULL 67/68] configure: remove unnecessary check Paolo Bonzini
2023-05-17 17:45 ` [PULL 68/68] docs/devel: update build system docs Paolo Bonzini
2023-05-17 20:31 ` [PULL 00/68] i386, build system, KVM changes for 2023-05-18 Richard Henderson
2023-05-18  5:09   ` Paolo Bonzini
2023-05-18  9:22   ` Peter Maydell
2023-05-18  9:52     ` Paolo Bonzini
2023-05-18 11:35     ` Paolo Bonzini
2023-05-18 13:04     ` Richard Henderson
2023-05-19  3:06 ` Yang Zhong
2023-05-19  8:29   ` Paolo Bonzini
2023-05-22  9:11     ` Yang Zhong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230517174520.887405-13-pbonzini@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=gshan@redhat.com \
    --cc=peterx@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=zhenyzha@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).