From: Jonathan Cameron via <qemu-devel@nongnu.org>
To: <qemu-devel@nongnu.org>, Michael Tsirkin <mst@redhat.com>,
Fan Ni <fan.ni@samsung.com>
Cc: linux-cxl@vger.kernel.org, "Ira Weiny" <ira.weiny@intel.com>,
"Michael Roth" <michael.roth@amd.com>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Dave Jiang" <dave.jiang@intel.com>,
"Markus Armbruster" <armbru@redhat.com>,
"Daniel P . Berrangé" <berrange@redhat.com>,
"Eric Blake" <eblake@redhat.com>,
"Mike Maslenkin" <mike.maslenkin@gmail.com>,
"Marc-André Lureau" <marcandre.lureau@redhat.com>,
"Thomas Huth" <thuth@redhat.com>
Subject: Re: [PATCH v6 2/4] hw/cxl: QMP based poison injection support
Date: Mon, 22 May 2023 12:20:50 +0100 [thread overview]
Message-ID: <20230522122037.0000542c@huawei.com> (raw)
In-Reply-To: <20230519141803.29713-3-Jonathan.Cameron@huawei.com>
On Fri, 19 May 2023 15:18:01 +0100
Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote:
> Inject poison using qmp command cxl-inject-poison to add an entry to the
> poison list.
>
> For now, the poison is not returned CXL.mem reads, but only via the
> mailbox command Get Poison List. So a normal memory read to an address
> that is on the poison list will not yet result in a synchronous exception
> (and similar for partial cacheline writes).
> That is left for a future patch.
>
> See CXL rev 3.0, sec 8.2.9.8.4.1 Get Poison list (Opcode 4300h)
>
> Kernel patches to use this interface here:
> https://lore.kernel.org/linux-cxl/cover.1665606782.git.alison.schofield@intel.com/
>
> To inject poison using qmp (telnet to the qmp port)
> { "execute": "qmp_capabilities" }
>
> { "execute": "cxl-inject-poison",
> "arguments": {
> "path": "/machine/peripheral/cxl-pmem0",
> "start": 2048,
> "length": 256
> }
> }
>
> Adjusted to select a device on your machine.
>
> Note that the poison list supported is kept short enough to avoid the
> complexity of state machine that is needed to handle the MORE flag.
>
> Reviewed-by: Fan Ni <fan.ni@samsung.com>
> Reviewed-by: Ira Weiny <ira.weiny@intel.com>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
For reference. Markus Armbruster gave some feedback on v5 that crossed this this.
I'll incorporate into v7.
Thanks,
Jonathan
> ---
> hw/cxl/cxl-mailbox-utils.c | 90 +++++++++++++++++++++++++++++++++++++
> hw/mem/cxl_type3.c | 56 +++++++++++++++++++++++
> hw/mem/cxl_type3_stubs.c | 6 +++
> include/hw/cxl/cxl.h | 1 +
> include/hw/cxl/cxl_device.h | 20 +++++++++
> qapi/cxl.json | 18 ++++++++
> 6 files changed, 191 insertions(+)
>
> diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
> index 702e16ca20..1f74b26ea2 100644
> --- a/hw/cxl/cxl-mailbox-utils.c
> +++ b/hw/cxl/cxl-mailbox-utils.c
> @@ -62,6 +62,8 @@ enum {
> #define GET_PARTITION_INFO 0x0
> #define GET_LSA 0x2
> #define SET_LSA 0x3
> + MEDIA_AND_POISON = 0x43,
> + #define GET_POISON_LIST 0x0
> };
>
> /* 8.2.8.4.5.1 Command Return Codes */
> @@ -295,6 +297,10 @@ static CXLRetCode cmd_identify_memory_device(struct cxl_cmd *cmd,
> stq_le_p(&id->persistent_capacity, cxl_dstate->pmem_size / CXL_CAPACITY_MULTIPLIER);
> stq_le_p(&id->volatile_capacity, cxl_dstate->vmem_size / CXL_CAPACITY_MULTIPLIER);
> stl_le_p(&id->lsa_size, cvc->get_lsa_size(ct3d));
> + /* 256 poison records */
> + st24_le_p(id->poison_list_max_mer, 256);
> + /* No limit - so limited by main poison record limit */
> + stw_le_p(&id->inject_poison_limit, 0);
>
> *len = sizeof(*id);
> return CXL_MBOX_SUCCESS;
> @@ -384,6 +390,88 @@ static CXLRetCode cmd_ccls_set_lsa(struct cxl_cmd *cmd,
> return CXL_MBOX_SUCCESS;
> }
>
> +/*
> + * This is very inefficient, but good enough for now!
> + * Also the payload will always fit, so no need to handle the MORE flag and
> + * make this stateful. We may want to allow longer poison lists to aid
> + * testing that kernel functionality.
> + */
> +static CXLRetCode cmd_media_get_poison_list(struct cxl_cmd *cmd,
> + CXLDeviceState *cxl_dstate,
> + uint16_t *len)
> +{
> + struct get_poison_list_pl {
> + uint64_t pa;
> + uint64_t length;
> + } QEMU_PACKED;
> +
> + struct get_poison_list_out_pl {
> + uint8_t flags;
> + uint8_t rsvd1;
> + uint64_t overflow_timestamp;
> + uint16_t count;
> + uint8_t rsvd2[0x14];
> + struct {
> + uint64_t addr;
> + uint32_t length;
> + uint32_t resv;
> + } QEMU_PACKED records[];
> + } QEMU_PACKED;
> +
> + struct get_poison_list_pl *in = (void *)cmd->payload;
> + struct get_poison_list_out_pl *out = (void *)cmd->payload;
> + CXLType3Dev *ct3d = container_of(cxl_dstate, CXLType3Dev, cxl_dstate);
> + uint16_t record_count = 0, i = 0;
> + uint64_t query_start, query_length;
> + CXLPoisonList *poison_list = &ct3d->poison_list;
> + CXLPoison *ent;
> + uint16_t out_pl_len;
> +
> + query_start = ldq_le_p(&in->pa);
> + /* 64 byte alignemnt required */
> + if (query_start & 0x3f) {
> + return CXL_MBOX_INVALID_INPUT;
> + }
> + query_length = ldq_le_p(&in->length) * CXL_CACHE_LINE_SIZE;
> +
> + QLIST_FOREACH(ent, poison_list, node) {
> + /* Check for no overlap */
> + if (ent->start >= query_start + query_length ||
> + ent->start + ent->length <= query_start) {
> + continue;
> + }
> + record_count++;
> + }
> + out_pl_len = sizeof(*out) + record_count * sizeof(out->records[0]);
> + assert(out_pl_len <= CXL_MAILBOX_MAX_PAYLOAD_SIZE);
> +
> + memset(out, 0, out_pl_len);
> + QLIST_FOREACH(ent, poison_list, node) {
> + uint64_t start, stop;
> +
> + /* Check for no overlap */
> + if (ent->start >= query_start + query_length ||
> + ent->start + ent->length <= query_start) {
> + continue;
> + }
> +
> + /* Deal with overlap */
> + start = MAX(ROUND_DOWN(ent->start, 64ull), query_start);
> + stop = MIN(ROUND_DOWN(ent->start, 64ull) + ent->length,
> + query_start + query_length);
> + stq_le_p(&out->records[i].addr, start | (ent->type & 0x7));
> + stl_le_p(&out->records[i].length, (stop - start) / CXL_CACHE_LINE_SIZE);
> + i++;
> + }
> + if (ct3d->poison_list_overflowed) {
> + out->flags = (1 << 1);
> + stq_le_p(&out->overflow_timestamp, ct3d->poison_list_overflow_ts);
> + }
> + stw_le_p(&out->count, record_count);
> + *len = out_pl_len;
> + return CXL_MBOX_SUCCESS;
> +}
> +
> #define IMMEDIATE_CONFIG_CHANGE (1 << 1)
> #define IMMEDIATE_DATA_CHANGE (1 << 2)
> #define IMMEDIATE_POLICY_CHANGE (1 << 3)
> @@ -411,6 +499,8 @@ static struct cxl_cmd cxl_cmd_set[256][256] = {
> [CCLS][GET_LSA] = { "CCLS_GET_LSA", cmd_ccls_get_lsa, 8, 0 },
> [CCLS][SET_LSA] = { "CCLS_SET_LSA", cmd_ccls_set_lsa,
> ~0, IMMEDIATE_CONFIG_CHANGE | IMMEDIATE_DATA_CHANGE },
> + [MEDIA_AND_POISON][GET_POISON_LIST] = { "MEDIA_AND_POISON_GET_POISON_LIST",
> + cmd_media_get_poison_list, 16, 0 },
> };
>
> void cxl_process_mailbox(CXLDeviceState *cxl_dstate)
> diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
> index 2adacbd01b..ab600735eb 100644
> --- a/hw/mem/cxl_type3.c
> +++ b/hw/mem/cxl_type3.c
> @@ -947,6 +947,62 @@ static void set_lsa(CXLType3Dev *ct3d, const void *buf, uint64_t size,
> */
> }
>
> +void cxl_set_poison_list_overflowed(CXLType3Dev *ct3d)
> +{
> + ct3d->poison_list_overflowed = true;
> + ct3d->poison_list_overflow_ts =
> + cxl_device_get_timestamp(&ct3d->cxl_dstate);
> +}
> +
> +void qmp_cxl_inject_poison(const char *path, uint64_t start, uint64_t length,
> + Error **errp)
> +{
> + Object *obj = object_resolve_path(path, NULL);
> + CXLType3Dev *ct3d;
> + CXLPoison *p;
> +
> + if (length % 64) {
> + error_setg(errp, "Poison injection must be in multiples of 64 bytes");
> + return;
> + }
> + if (start % 64) {
> + error_setg(errp, "Poison start address must be 64 byte aligned");
> + return;
> + }
> + if (!obj) {
> + error_setg(errp, "Unable to resolve path");
> + return;
> + }
> + if (!object_dynamic_cast(obj, TYPE_CXL_TYPE3)) {
> + error_setg(errp, "Path does not point to a CXL type 3 device");
> + return;
> + }
> +
> + ct3d = CXL_TYPE3(obj);
> +
> + QLIST_FOREACH(p, &ct3d->poison_list, node) {
> + if (((start >= p->start) && (start < p->start + p->length)) ||
> + ((start + length > p->start) &&
> + (start + length <= p->start + p->length))) {
> + error_setg(errp, "Overlap with existing poisoned region not supported");
> + return;
> + }
> + }
> +
> + if (ct3d->poison_list_cnt == CXL_POISON_LIST_LIMIT) {
> + cxl_set_poison_list_overflowed(ct3d);
> + return;
> + }
> +
> + p = g_new0(CXLPoison, 1);
> + p->length = length;
> + p->start = start;
> + p->type = CXL_POISON_TYPE_INTERNAL; /* Different from injected via the mbox */
> +
> + QLIST_INSERT_HEAD(&ct3d->poison_list, p, node);
> + ct3d->poison_list_cnt++;
> +}
> +
> /* For uncorrectable errors include support for multiple header recording */
> void qmp_cxl_inject_uncorrectable_errors(const char *path,
> CXLUncorErrorRecordList *errors,
> diff --git a/hw/mem/cxl_type3_stubs.c b/hw/mem/cxl_type3_stubs.c
> index d574c58f9a..fd1166a610 100644
> --- a/hw/mem/cxl_type3_stubs.c
> +++ b/hw/mem/cxl_type3_stubs.c
> @@ -3,6 +3,12 @@
> #include "qapi/error.h"
> #include "qapi/qapi-commands-cxl.h"
>
> +void qmp_cxl_inject_poison(const char *path, uint64_t start, uint64_t length,
> + Error **errp)
> +{
> + error_setg(errp, "CXL Type 3 support is not compiled in");
> +}
> +
> void qmp_cxl_inject_uncorrectable_errors(const char *path,
> CXLUncorErrorRecordList *errors,
> Error **errp)
> diff --git a/include/hw/cxl/cxl.h b/include/hw/cxl/cxl.h
> index c453983e83..56c9e7676e 100644
> --- a/include/hw/cxl/cxl.h
> +++ b/include/hw/cxl/cxl.h
> @@ -18,6 +18,7 @@
> #include "cxl_component.h"
> #include "cxl_device.h"
>
> +#define CXL_CACHE_LINE_SIZE 64
> #define CXL_COMPONENT_REG_BAR_IDX 0
> #define CXL_DEVICE_REG_BAR_IDX 2
>
> diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
> index 02befda0f6..32c234ea91 100644
> --- a/include/hw/cxl/cxl_device.h
> +++ b/include/hw/cxl/cxl_device.h
> @@ -242,6 +242,18 @@ typedef struct CXLError {
>
> typedef QTAILQ_HEAD(, CXLError) CXLErrorList;
>
> +typedef struct CXLPoison {
> + uint64_t start, length;
> + uint8_t type;
> +#define CXL_POISON_TYPE_EXTERNAL 0x1
> +#define CXL_POISON_TYPE_INTERNAL 0x2
> +#define CXL_POISON_TYPE_INJECTED 0x3
> + QLIST_ENTRY(CXLPoison) node;
> +} CXLPoison;
> +
> +typedef QLIST_HEAD(, CXLPoison) CXLPoisonList;
> +#define CXL_POISON_LIST_LIMIT 256
> +
> struct CXLType3Dev {
> /* Private */
> PCIDevice parent_obj;
> @@ -264,6 +276,12 @@ struct CXLType3Dev {
>
> /* Error injection */
> CXLErrorList error_list;
> +
> + /* Poison Injection - cache */
> + CXLPoisonList poison_list;
> + unsigned int poison_list_cnt;
> + bool poison_list_overflowed;
> + uint64_t poison_list_overflow_ts;
> };
>
> #define TYPE_CXL_TYPE3 "cxl-type3"
> @@ -289,4 +307,6 @@ MemTxResult cxl_type3_write(PCIDevice *d, hwaddr host_addr, uint64_t data,
>
> uint64_t cxl_device_get_timestamp(CXLDeviceState *cxlds);
>
> +void cxl_set_poison_list_overflowed(CXLType3Dev *ct3d);
> +
> #endif
> diff --git a/qapi/cxl.json b/qapi/cxl.json
> index b21c9b4c1c..dcf9e7b715 100644
> --- a/qapi/cxl.json
> +++ b/qapi/cxl.json
> @@ -5,6 +5,24 @@
> # = CXL devices
> ##
>
> +##
> +# @cxl-inject-poison:
> +#
> +# Poison records indicate that a CXL memory device knows that a particular
> +# memory region may be corrupted. This may be because of locally detected
> +# errors (e.g. ECC failure) or poisoned writes received from other components
> +# in the system. This injection mechanism enables testing of the OS handling
> +# of poison records which may be queried via the CXL mailbox.
> +#
> +# @path: CXL type 3 device canonical QOM path
> +# @start: Start address - must be 64 byte aligned.
> +# @length: Length of poison to inject - must be a multiple of 64 bytes.
> +#
> +# Since: 8.1
> +##
> +{ 'command': 'cxl-inject-poison',
> + 'data': { 'path': 'str', 'start': 'uint64', 'length': 'uint64' }}
> +
> ##
> # @CxlUncorErrorType:
> #
next prev parent reply other threads:[~2023-05-22 11:21 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-19 14:17 [PATCH v6 0/4] hw/cxl: Poison get, inject, clear Jonathan Cameron via
2023-05-19 14:18 ` [PATCH v6 1/4] bswap: Add the ability to store to an unaligned 24 bit field Jonathan Cameron via
2023-05-19 16:08 ` Philippe Mathieu-Daudé
2023-05-19 16:24 ` Jonathan Cameron via
2023-05-19 16:43 ` Philippe Mathieu-Daudé
2023-05-20 12:37 ` Peter Maydell
2023-05-20 13:15 ` BALATON Zoltan
2023-05-20 15:15 ` Richard Henderson
2023-05-20 17:08 ` Philippe Mathieu-Daudé
2023-05-21 9:05 ` Michael S. Tsirkin
2023-05-22 12:09 ` Jonathan Cameron via
2023-05-22 11:59 ` Jonathan Cameron via
2023-05-19 14:18 ` [PATCH v6 2/4] hw/cxl: QMP based poison injection support Jonathan Cameron via
2023-05-22 11:20 ` Jonathan Cameron via [this message]
2023-05-19 14:18 ` [PATCH v6 3/4] hw/cxl: Add poison injection via the mailbox Jonathan Cameron via
2023-05-19 14:18 ` [PATCH v6 4/4] hw/cxl: Add clear poison mailbox command support Jonathan Cameron via
2023-05-19 17:48 ` Ira Weiny
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230522122037.0000542c@huawei.com \
--to=qemu-devel@nongnu.org \
--cc=Jonathan.Cameron@Huawei.com \
--cc=armbru@redhat.com \
--cc=berrange@redhat.com \
--cc=dave.jiang@intel.com \
--cc=eblake@redhat.com \
--cc=fan.ni@samsung.com \
--cc=ira.weiny@intel.com \
--cc=linux-cxl@vger.kernel.org \
--cc=marcandre.lureau@redhat.com \
--cc=michael.roth@amd.com \
--cc=mike.maslenkin@gmail.com \
--cc=mst@redhat.com \
--cc=philmd@linaro.org \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).