From: Jason Wang <jasowang@redhat.com>
To: qemu-devel@nongnu.org, peter.maydell@linaro.org
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>,
Jason Wang <jasowang@redhat.com>
Subject: [PULL 02/50] hw/net/net_tx_pkt: Decouple implementation from PCI
Date: Tue, 23 May 2023 15:31:50 +0800 [thread overview]
Message-ID: <20230523073238.54236-3-jasowang@redhat.com> (raw)
In-Reply-To: <20230523073238.54236-1-jasowang@redhat.com>
From: Akihiko Odaki <akihiko.odaki@daynix.com>
This is intended to be followed by another change for the interface.
It also fixes the leak of memory mapping when the specified memory is
partially mapped.
Fixes: e263cd49c7 ("Packet abstraction for VMWARE network devices")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
hw/net/net_tx_pkt.c | 53 +++++++++++++++++++++++++++++++++--------------------
hw/net/net_tx_pkt.h | 9 +++++++++
2 files changed, 42 insertions(+), 20 deletions(-)
diff --git a/hw/net/net_tx_pkt.c b/hw/net/net_tx_pkt.c
index 8dc8568..aca12ff 100644
--- a/hw/net/net_tx_pkt.c
+++ b/hw/net/net_tx_pkt.c
@@ -384,10 +384,9 @@ void net_tx_pkt_setup_vlan_header_ex(struct NetTxPkt *pkt,
}
}
-bool net_tx_pkt_add_raw_fragment(struct NetTxPkt *pkt, hwaddr pa,
- size_t len)
+static bool net_tx_pkt_add_raw_fragment_common(struct NetTxPkt *pkt,
+ void *base, size_t len)
{
- hwaddr mapped_len = 0;
struct iovec *ventry;
assert(pkt);
@@ -395,23 +394,12 @@ bool net_tx_pkt_add_raw_fragment(struct NetTxPkt *pkt, hwaddr pa,
return false;
}
- if (!len) {
- return true;
- }
-
ventry = &pkt->raw[pkt->raw_frags];
- mapped_len = len;
+ ventry->iov_base = base;
+ ventry->iov_len = len;
+ pkt->raw_frags++;
- ventry->iov_base = pci_dma_map(pkt->pci_dev, pa,
- &mapped_len, DMA_DIRECTION_TO_DEVICE);
-
- if ((ventry->iov_base != NULL) && (len == mapped_len)) {
- ventry->iov_len = mapped_len;
- pkt->raw_frags++;
- return true;
- } else {
- return false;
- }
+ return true;
}
bool net_tx_pkt_has_fragments(struct NetTxPkt *pkt)
@@ -465,8 +453,9 @@ void net_tx_pkt_reset(struct NetTxPkt *pkt, PCIDevice *pci_dev)
assert(pkt->raw);
for (i = 0; i < pkt->raw_frags; i++) {
assert(pkt->raw[i].iov_base);
- pci_dma_unmap(pkt->pci_dev, pkt->raw[i].iov_base,
- pkt->raw[i].iov_len, DMA_DIRECTION_TO_DEVICE, 0);
+ net_tx_pkt_unmap_frag_pci(pkt->pci_dev,
+ pkt->raw[i].iov_base,
+ pkt->raw[i].iov_len);
}
}
pkt->pci_dev = pci_dev;
@@ -476,6 +465,30 @@ void net_tx_pkt_reset(struct NetTxPkt *pkt, PCIDevice *pci_dev)
pkt->l4proto = 0;
}
+void net_tx_pkt_unmap_frag_pci(void *context, void *base, size_t len)
+{
+ pci_dma_unmap(context, base, len, DMA_DIRECTION_TO_DEVICE, 0);
+}
+
+bool net_tx_pkt_add_raw_fragment(struct NetTxPkt *pkt, hwaddr pa,
+ size_t len)
+{
+ dma_addr_t mapped_len = len;
+ void *base = pci_dma_map(pkt->pci_dev, pa, &mapped_len,
+ DMA_DIRECTION_TO_DEVICE);
+ if (!base) {
+ return false;
+ }
+
+ if (mapped_len != len ||
+ !net_tx_pkt_add_raw_fragment_common(pkt, base, len)) {
+ net_tx_pkt_unmap_frag_pci(pkt->pci_dev, base, mapped_len);
+ return false;
+ }
+
+ return true;
+}
+
static void net_tx_pkt_do_sw_csum(struct NetTxPkt *pkt,
struct iovec *iov, uint32_t iov_len,
uint16_t csl)
diff --git a/hw/net/net_tx_pkt.h b/hw/net/net_tx_pkt.h
index e5ce6f2..5eb123e 100644
--- a/hw/net/net_tx_pkt.h
+++ b/hw/net/net_tx_pkt.h
@@ -154,6 +154,15 @@ void net_tx_pkt_dump(struct NetTxPkt *pkt);
void net_tx_pkt_reset(struct NetTxPkt *pkt, PCIDevice *dev);
/**
+ * Unmap a fragment mapped from a PCI device.
+ *
+ * @context: PCI device owning fragment
+ * @base: pointer to fragment
+ * @len: length of fragment
+ */
+void net_tx_pkt_unmap_frag_pci(void *context, void *base, size_t len);
+
+/**
* Send packet to qemu. handles sw offloads if vhdr is not supported.
*
* @pkt: packet
--
2.7.4
next prev parent reply other threads:[~2023-05-23 7:34 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-23 7:31 [PULL 00/50] Net patches Jason Wang
2023-05-23 7:31 ` [PULL 01/50] e1000e: Fix tx/rx counters Jason Wang
2023-05-23 7:31 ` Jason Wang [this message]
2023-05-23 7:31 ` [PULL 03/50] hw/net/net_tx_pkt: Decouple interface from PCI Jason Wang
2023-05-23 7:31 ` [PULL 04/50] e1000x: Fix BPRC and MPRC Jason Wang
2023-05-23 7:31 ` [PULL 05/50] igb: Fix Rx packet type encoding Jason Wang
2023-05-23 7:31 ` [PULL 06/50] igb: Do not require CTRL.VME for tx VLAN tagging Jason Wang
2023-05-23 7:31 ` [PULL 07/50] igb: Clear IMS bits when committing ICR access Jason Wang
2023-05-23 7:31 ` [PULL 08/50] net/net_rx_pkt: Use iovec for net_rx_pkt_set_protocols() Jason Wang
2023-05-23 7:31 ` [PULL 09/50] e1000e: Always copy ethernet header Jason Wang
2023-05-23 7:31 ` [PULL 10/50] igb: " Jason Wang
2023-05-23 7:31 ` [PULL 11/50] Fix references to igb Avocado test Jason Wang
2023-05-23 7:32 ` [PULL 12/50] tests/avocado: Remove unused imports Jason Wang
2023-05-23 7:32 ` [PULL 13/50] tests/avocado: Remove test_igb_nomsi_kvm Jason Wang
2023-05-23 7:32 ` [PULL 14/50] hw/net/net_tx_pkt: Remove net_rx_pkt_get_l4_info Jason Wang
2023-05-23 7:32 ` [PULL 15/50] net/eth: Rename eth_setup_vlan_headers_ex Jason Wang
2023-05-23 7:32 ` [PULL 16/50] e1000x: Share more Rx filtering logic Jason Wang
2023-05-23 7:32 ` [PULL 17/50] e1000x: Take CRC into consideration for size check Jason Wang
2023-05-23 7:32 ` [PULL 18/50] e1000x: Rename TcpIpv6 into TcpIpv6Ex Jason Wang
2023-05-23 7:32 ` [PULL 19/50] e1000e: Always log status after building rx metadata Jason Wang
2023-05-23 7:32 ` [PULL 20/50] igb: " Jason Wang
2023-05-23 7:32 ` [PULL 21/50] igb: Remove goto Jason Wang
2023-05-23 7:32 ` [PULL 22/50] igb: Read DCMD.VLE of the first Tx descriptor Jason Wang
2023-05-23 7:32 ` [PULL 23/50] e1000e: Reset packet state after emptying Tx queue Jason Wang
2023-05-23 7:32 ` [PULL 24/50] vmxnet3: " Jason Wang
2023-05-23 7:32 ` [PULL 25/50] igb: Add more definitions for Tx descriptor Jason Wang
2023-05-23 7:32 ` [PULL 26/50] igb: Share common VF constants Jason Wang
2023-05-23 7:32 ` [PULL 27/50] igb: Fix igb_mac_reg_init coding style alignment Jason Wang
2023-05-23 7:32 ` [PULL 28/50] igb: Clear EICR bits for delayed MSI-X interrupts Jason Wang
2023-05-23 7:32 ` [PULL 29/50] e1000e: Rename a variable in e1000e_receive_internal() Jason Wang
2023-05-23 7:32 ` [PULL 30/50] igb: Rename a variable in igb_receive_internal() Jason Wang
2023-05-23 7:32 ` [PULL 31/50] net/eth: Use void pointers Jason Wang
2023-05-23 7:32 ` [PULL 32/50] net/eth: Always add VLAN tag Jason Wang
2023-05-23 7:32 ` [PULL 33/50] hw/net/net_rx_pkt: Enforce alignment for eth_header Jason Wang
2023-05-23 7:32 ` [PULL 34/50] tests/qtest/libqos/igb: Set GPIE.Multiple_MSIX Jason Wang
2023-05-23 7:32 ` [PULL 35/50] igb: Implement MSI-X single vector mode Jason Wang
2023-05-23 7:32 ` [PULL 36/50] igb: Use UDP for RSS hash Jason Wang
2023-05-23 7:32 ` [PULL 37/50] igb: Implement Rx SCTP CSO Jason Wang
2023-05-23 7:32 ` [PULL 38/50] igb: Implement Tx " Jason Wang
2023-05-23 7:32 ` [PULL 39/50] igb: Strip the second VLAN tag for extended VLAN Jason Wang
2023-05-23 7:32 ` [PULL 40/50] igb: Filter with " Jason Wang
2023-05-23 7:32 ` [PULL 41/50] igb: Implement igb-specific oversize check Jason Wang
2023-05-23 7:32 ` [PULL 42/50] igb: Implement Rx PTP2 timestamp Jason Wang
2023-05-23 7:32 ` [PULL 43/50] igb: Implement Tx timestamp Jason Wang
2023-05-23 7:32 ` [PULL 44/50] e1000e: Notify only new interrupts Jason Wang
2023-05-23 7:32 ` [PULL 45/50] igb: " Jason Wang
2023-05-23 7:32 ` [PULL 46/50] igb: Clear-on-read ICR when ICR.INTA is set Jason Wang
2023-05-23 7:32 ` [PULL 47/50] vmxnet3: Do not depend on PC Jason Wang
2023-05-23 7:32 ` [PULL 48/50] MAINTAINERS: Add a reviewer for network packet abstractions Jason Wang
2023-05-23 7:32 ` [PULL 49/50] docs/system/devices/igb: Note igb is tested for DPDK Jason Wang
2023-05-23 7:32 ` [PULL 50/50] rtl8139: fix large_send_mss divide-by-zero Jason Wang
2023-05-23 17:56 ` [PULL 00/50] Net patches Richard Henderson
2023-05-23 19:53 ` Michael Tokarev
2023-05-24 4:06 ` Jason Wang
2023-05-24 4:21 ` Akihiko Odaki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230523073238.54236-3-jasowang@redhat.com \
--to=jasowang@redhat.com \
--cc=akihiko.odaki@daynix.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).