From: Jason Wang <jasowang@redhat.com>
To: qemu-devel@nongnu.org, peter.maydell@linaro.org
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>,
Jason Wang <jasowang@redhat.com>
Subject: [PULL 32/50] net/eth: Always add VLAN tag
Date: Tue, 23 May 2023 15:32:20 +0800 [thread overview]
Message-ID: <20230523073238.54236-33-jasowang@redhat.com> (raw)
In-Reply-To: <20230523073238.54236-1-jasowang@redhat.com>
From: Akihiko Odaki <akihiko.odaki@daynix.com>
It is possible to have another VLAN tag even if the packet is already
tagged.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
hw/net/net_tx_pkt.c | 16 +++++++---------
include/net/eth.h | 4 ++--
net/eth.c | 22 ++++++----------------
3 files changed, 15 insertions(+), 27 deletions(-)
diff --git a/hw/net/net_tx_pkt.c b/hw/net/net_tx_pkt.c
index ce6b102..af8f77a 100644
--- a/hw/net/net_tx_pkt.c
+++ b/hw/net/net_tx_pkt.c
@@ -40,7 +40,10 @@ struct NetTxPkt {
struct iovec *vec;
- uint8_t l2_hdr[ETH_MAX_L2_HDR_LEN];
+ struct {
+ struct eth_header eth;
+ struct vlan_header vlan[3];
+ } l2_hdr;
union {
struct ip_header ip;
struct ip6_header ip6;
@@ -365,18 +368,13 @@ bool net_tx_pkt_build_vheader(struct NetTxPkt *pkt, bool tso_enable,
void net_tx_pkt_setup_vlan_header_ex(struct NetTxPkt *pkt,
uint16_t vlan, uint16_t vlan_ethtype)
{
- bool is_new;
assert(pkt);
eth_setup_vlan_headers(pkt->vec[NET_TX_PKT_L2HDR_FRAG].iov_base,
- vlan, vlan_ethtype, &is_new);
+ &pkt->vec[NET_TX_PKT_L2HDR_FRAG].iov_len,
+ vlan, vlan_ethtype);
- /* update l2hdrlen */
- if (is_new) {
- pkt->hdr_len += sizeof(struct vlan_header);
- pkt->vec[NET_TX_PKT_L2HDR_FRAG].iov_len +=
- sizeof(struct vlan_header);
- }
+ pkt->hdr_len += sizeof(struct vlan_header);
}
bool net_tx_pkt_add_raw_fragment(struct NetTxPkt *pkt, void *base, size_t len)
diff --git a/include/net/eth.h b/include/net/eth.h
index 95ff24d..048e434 100644
--- a/include/net/eth.h
+++ b/include/net/eth.h
@@ -353,8 +353,8 @@ eth_strip_vlan_ex(const struct iovec *iov, int iovcnt, size_t iovoff,
uint16_t
eth_get_l3_proto(const struct iovec *l2hdr_iov, int iovcnt, size_t l2hdr_len);
-void eth_setup_vlan_headers(struct eth_header *ehdr, uint16_t vlan_tag,
- uint16_t vlan_ethtype, bool *is_new);
+void eth_setup_vlan_headers(struct eth_header *ehdr, size_t *ehdr_size,
+ uint16_t vlan_tag, uint16_t vlan_ethtype);
uint8_t eth_get_gso_type(uint16_t l3_proto, uint8_t *l3_hdr, uint8_t l4proto);
diff --git a/net/eth.c b/net/eth.c
index f7ffbda..5307978 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -21,26 +21,16 @@
#include "net/checksum.h"
#include "net/tap.h"
-void eth_setup_vlan_headers(struct eth_header *ehdr, uint16_t vlan_tag,
- uint16_t vlan_ethtype, bool *is_new)
+void eth_setup_vlan_headers(struct eth_header *ehdr, size_t *ehdr_size,
+ uint16_t vlan_tag, uint16_t vlan_ethtype)
{
struct vlan_header *vhdr = PKT_GET_VLAN_HDR(ehdr);
- switch (be16_to_cpu(ehdr->h_proto)) {
- case ETH_P_VLAN:
- case ETH_P_DVLAN:
- /* vlan hdr exists */
- *is_new = false;
- break;
-
- default:
- /* No VLAN header, put a new one */
- vhdr->h_proto = ehdr->h_proto;
- ehdr->h_proto = cpu_to_be16(vlan_ethtype);
- *is_new = true;
- break;
- }
+ memmove(vhdr + 1, vhdr, *ehdr_size - ETH_HLEN);
vhdr->h_tci = cpu_to_be16(vlan_tag);
+ vhdr->h_proto = ehdr->h_proto;
+ ehdr->h_proto = cpu_to_be16(vlan_ethtype);
+ *ehdr_size += sizeof(*vhdr);
}
uint8_t
--
2.7.4
next prev parent reply other threads:[~2023-05-23 7:37 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-23 7:31 [PULL 00/50] Net patches Jason Wang
2023-05-23 7:31 ` [PULL 01/50] e1000e: Fix tx/rx counters Jason Wang
2023-05-23 7:31 ` [PULL 02/50] hw/net/net_tx_pkt: Decouple implementation from PCI Jason Wang
2023-05-23 7:31 ` [PULL 03/50] hw/net/net_tx_pkt: Decouple interface " Jason Wang
2023-05-23 7:31 ` [PULL 04/50] e1000x: Fix BPRC and MPRC Jason Wang
2023-05-23 7:31 ` [PULL 05/50] igb: Fix Rx packet type encoding Jason Wang
2023-05-23 7:31 ` [PULL 06/50] igb: Do not require CTRL.VME for tx VLAN tagging Jason Wang
2023-05-23 7:31 ` [PULL 07/50] igb: Clear IMS bits when committing ICR access Jason Wang
2023-05-23 7:31 ` [PULL 08/50] net/net_rx_pkt: Use iovec for net_rx_pkt_set_protocols() Jason Wang
2023-05-23 7:31 ` [PULL 09/50] e1000e: Always copy ethernet header Jason Wang
2023-05-23 7:31 ` [PULL 10/50] igb: " Jason Wang
2023-05-23 7:31 ` [PULL 11/50] Fix references to igb Avocado test Jason Wang
2023-05-23 7:32 ` [PULL 12/50] tests/avocado: Remove unused imports Jason Wang
2023-05-23 7:32 ` [PULL 13/50] tests/avocado: Remove test_igb_nomsi_kvm Jason Wang
2023-05-23 7:32 ` [PULL 14/50] hw/net/net_tx_pkt: Remove net_rx_pkt_get_l4_info Jason Wang
2023-05-23 7:32 ` [PULL 15/50] net/eth: Rename eth_setup_vlan_headers_ex Jason Wang
2023-05-23 7:32 ` [PULL 16/50] e1000x: Share more Rx filtering logic Jason Wang
2023-05-23 7:32 ` [PULL 17/50] e1000x: Take CRC into consideration for size check Jason Wang
2023-05-23 7:32 ` [PULL 18/50] e1000x: Rename TcpIpv6 into TcpIpv6Ex Jason Wang
2023-05-23 7:32 ` [PULL 19/50] e1000e: Always log status after building rx metadata Jason Wang
2023-05-23 7:32 ` [PULL 20/50] igb: " Jason Wang
2023-05-23 7:32 ` [PULL 21/50] igb: Remove goto Jason Wang
2023-05-23 7:32 ` [PULL 22/50] igb: Read DCMD.VLE of the first Tx descriptor Jason Wang
2023-05-23 7:32 ` [PULL 23/50] e1000e: Reset packet state after emptying Tx queue Jason Wang
2023-05-23 7:32 ` [PULL 24/50] vmxnet3: " Jason Wang
2023-05-23 7:32 ` [PULL 25/50] igb: Add more definitions for Tx descriptor Jason Wang
2023-05-23 7:32 ` [PULL 26/50] igb: Share common VF constants Jason Wang
2023-05-23 7:32 ` [PULL 27/50] igb: Fix igb_mac_reg_init coding style alignment Jason Wang
2023-05-23 7:32 ` [PULL 28/50] igb: Clear EICR bits for delayed MSI-X interrupts Jason Wang
2023-05-23 7:32 ` [PULL 29/50] e1000e: Rename a variable in e1000e_receive_internal() Jason Wang
2023-05-23 7:32 ` [PULL 30/50] igb: Rename a variable in igb_receive_internal() Jason Wang
2023-05-23 7:32 ` [PULL 31/50] net/eth: Use void pointers Jason Wang
2023-05-23 7:32 ` Jason Wang [this message]
2023-05-23 7:32 ` [PULL 33/50] hw/net/net_rx_pkt: Enforce alignment for eth_header Jason Wang
2023-05-23 7:32 ` [PULL 34/50] tests/qtest/libqos/igb: Set GPIE.Multiple_MSIX Jason Wang
2023-05-23 7:32 ` [PULL 35/50] igb: Implement MSI-X single vector mode Jason Wang
2023-05-23 7:32 ` [PULL 36/50] igb: Use UDP for RSS hash Jason Wang
2023-05-23 7:32 ` [PULL 37/50] igb: Implement Rx SCTP CSO Jason Wang
2023-05-23 7:32 ` [PULL 38/50] igb: Implement Tx " Jason Wang
2023-05-23 7:32 ` [PULL 39/50] igb: Strip the second VLAN tag for extended VLAN Jason Wang
2023-05-23 7:32 ` [PULL 40/50] igb: Filter with " Jason Wang
2023-05-23 7:32 ` [PULL 41/50] igb: Implement igb-specific oversize check Jason Wang
2023-05-23 7:32 ` [PULL 42/50] igb: Implement Rx PTP2 timestamp Jason Wang
2023-05-23 7:32 ` [PULL 43/50] igb: Implement Tx timestamp Jason Wang
2023-05-23 7:32 ` [PULL 44/50] e1000e: Notify only new interrupts Jason Wang
2023-05-23 7:32 ` [PULL 45/50] igb: " Jason Wang
2023-05-23 7:32 ` [PULL 46/50] igb: Clear-on-read ICR when ICR.INTA is set Jason Wang
2023-05-23 7:32 ` [PULL 47/50] vmxnet3: Do not depend on PC Jason Wang
2023-05-23 7:32 ` [PULL 48/50] MAINTAINERS: Add a reviewer for network packet abstractions Jason Wang
2023-05-23 7:32 ` [PULL 49/50] docs/system/devices/igb: Note igb is tested for DPDK Jason Wang
2023-05-23 7:32 ` [PULL 50/50] rtl8139: fix large_send_mss divide-by-zero Jason Wang
2023-05-23 17:56 ` [PULL 00/50] Net patches Richard Henderson
2023-05-23 19:53 ` Michael Tokarev
2023-05-24 4:06 ` Jason Wang
2023-05-24 4:21 ` Akihiko Odaki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230523073238.54236-33-jasowang@redhat.com \
--to=jasowang@redhat.com \
--cc=akihiko.odaki@daynix.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).