From: Jason Wang <jasowang@redhat.com>
To: qemu-devel@nongnu.org, peter.maydell@linaro.org
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>,
Sriram Yagnaraman <sriram.yagnaraman@est.tech>,
Jason Wang <jasowang@redhat.com>
Subject: [PULL 05/50] igb: Fix Rx packet type encoding
Date: Tue, 23 May 2023 15:31:53 +0800 [thread overview]
Message-ID: <20230523073238.54236-6-jasowang@redhat.com> (raw)
In-Reply-To: <20230523073238.54236-1-jasowang@redhat.com>
From: Akihiko Odaki <akihiko.odaki@daynix.com>
igb's advanced descriptor uses a packet type encoding different from
one used in e1000e's extended descriptor. Fix the logic to encode
Rx packet type accordingly.
Fixes: 3a977deebe ("Intrdocue igb device emulation")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
hw/net/igb_core.c | 38 +++++++++++++++++++-------------------
hw/net/igb_regs.h | 5 +++++
2 files changed, 24 insertions(+), 19 deletions(-)
diff --git a/hw/net/igb_core.c b/hw/net/igb_core.c
index 464a41d..dbd1192 100644
--- a/hw/net/igb_core.c
+++ b/hw/net/igb_core.c
@@ -1227,7 +1227,6 @@ igb_build_rx_metadata(IGBCore *core,
struct virtio_net_hdr *vhdr;
bool hasip4, hasip6;
EthL4HdrProto l4hdr_proto;
- uint32_t pkt_type;
*status_flags = E1000_RXD_STAT_DD;
@@ -1266,28 +1265,29 @@ igb_build_rx_metadata(IGBCore *core,
trace_e1000e_rx_metadata_ack();
}
- if (hasip6 && (core->mac[RFCTL] & E1000_RFCTL_IPV6_DIS)) {
- trace_e1000e_rx_metadata_ipv6_filtering_disabled();
- pkt_type = E1000_RXD_PKT_MAC;
- } else if (l4hdr_proto == ETH_L4_HDR_PROTO_TCP ||
- l4hdr_proto == ETH_L4_HDR_PROTO_UDP) {
- pkt_type = hasip4 ? E1000_RXD_PKT_IP4_XDP : E1000_RXD_PKT_IP6_XDP;
- } else if (hasip4 || hasip6) {
- pkt_type = hasip4 ? E1000_RXD_PKT_IP4 : E1000_RXD_PKT_IP6;
- } else {
- pkt_type = E1000_RXD_PKT_MAC;
- }
+ if (pkt_info) {
+ *pkt_info = rss_info->enabled ? rss_info->type : 0;
- trace_e1000e_rx_metadata_pkt_type(pkt_type);
+ if (hasip4) {
+ *pkt_info |= E1000_ADVRXD_PKT_IP4;
+ }
- if (pkt_info) {
- if (rss_info->enabled) {
- *pkt_info = rss_info->type;
+ if (hasip6) {
+ *pkt_info |= E1000_ADVRXD_PKT_IP6;
}
- *pkt_info |= (pkt_type << 4);
- } else {
- *status_flags |= E1000_RXD_PKT_TYPE(pkt_type);
+ switch (l4hdr_proto) {
+ case ETH_L4_HDR_PROTO_TCP:
+ *pkt_info |= E1000_ADVRXD_PKT_TCP;
+ break;
+
+ case ETH_L4_HDR_PROTO_UDP:
+ *pkt_info |= E1000_ADVRXD_PKT_UDP;
+ break;
+
+ default:
+ break;
+ }
}
if (hdr_info) {
diff --git a/hw/net/igb_regs.h b/hw/net/igb_regs.h
index c5c5b3c..21ee9a3 100644
--- a/hw/net/igb_regs.h
+++ b/hw/net/igb_regs.h
@@ -641,6 +641,11 @@ union e1000_adv_rx_desc {
#define E1000_STATUS_NUM_VFS_SHIFT 14
+#define E1000_ADVRXD_PKT_IP4 BIT(4)
+#define E1000_ADVRXD_PKT_IP6 BIT(6)
+#define E1000_ADVRXD_PKT_TCP BIT(8)
+#define E1000_ADVRXD_PKT_UDP BIT(9)
+
static inline uint8_t igb_ivar_entry_rx(uint8_t i)
{
return i < 8 ? i * 4 : (i - 8) * 4 + 2;
--
2.7.4
next prev parent reply other threads:[~2023-05-23 7:37 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-23 7:31 [PULL 00/50] Net patches Jason Wang
2023-05-23 7:31 ` [PULL 01/50] e1000e: Fix tx/rx counters Jason Wang
2023-05-23 7:31 ` [PULL 02/50] hw/net/net_tx_pkt: Decouple implementation from PCI Jason Wang
2023-05-23 7:31 ` [PULL 03/50] hw/net/net_tx_pkt: Decouple interface " Jason Wang
2023-05-23 7:31 ` [PULL 04/50] e1000x: Fix BPRC and MPRC Jason Wang
2023-05-23 7:31 ` Jason Wang [this message]
2023-05-23 7:31 ` [PULL 06/50] igb: Do not require CTRL.VME for tx VLAN tagging Jason Wang
2023-05-23 7:31 ` [PULL 07/50] igb: Clear IMS bits when committing ICR access Jason Wang
2023-05-23 7:31 ` [PULL 08/50] net/net_rx_pkt: Use iovec for net_rx_pkt_set_protocols() Jason Wang
2023-05-23 7:31 ` [PULL 09/50] e1000e: Always copy ethernet header Jason Wang
2023-05-23 7:31 ` [PULL 10/50] igb: " Jason Wang
2023-05-23 7:31 ` [PULL 11/50] Fix references to igb Avocado test Jason Wang
2023-05-23 7:32 ` [PULL 12/50] tests/avocado: Remove unused imports Jason Wang
2023-05-23 7:32 ` [PULL 13/50] tests/avocado: Remove test_igb_nomsi_kvm Jason Wang
2023-05-23 7:32 ` [PULL 14/50] hw/net/net_tx_pkt: Remove net_rx_pkt_get_l4_info Jason Wang
2023-05-23 7:32 ` [PULL 15/50] net/eth: Rename eth_setup_vlan_headers_ex Jason Wang
2023-05-23 7:32 ` [PULL 16/50] e1000x: Share more Rx filtering logic Jason Wang
2023-05-23 7:32 ` [PULL 17/50] e1000x: Take CRC into consideration for size check Jason Wang
2023-05-23 7:32 ` [PULL 18/50] e1000x: Rename TcpIpv6 into TcpIpv6Ex Jason Wang
2023-05-23 7:32 ` [PULL 19/50] e1000e: Always log status after building rx metadata Jason Wang
2023-05-23 7:32 ` [PULL 20/50] igb: " Jason Wang
2023-05-23 7:32 ` [PULL 21/50] igb: Remove goto Jason Wang
2023-05-23 7:32 ` [PULL 22/50] igb: Read DCMD.VLE of the first Tx descriptor Jason Wang
2023-05-23 7:32 ` [PULL 23/50] e1000e: Reset packet state after emptying Tx queue Jason Wang
2023-05-23 7:32 ` [PULL 24/50] vmxnet3: " Jason Wang
2023-05-23 7:32 ` [PULL 25/50] igb: Add more definitions for Tx descriptor Jason Wang
2023-05-23 7:32 ` [PULL 26/50] igb: Share common VF constants Jason Wang
2023-05-23 7:32 ` [PULL 27/50] igb: Fix igb_mac_reg_init coding style alignment Jason Wang
2023-05-23 7:32 ` [PULL 28/50] igb: Clear EICR bits for delayed MSI-X interrupts Jason Wang
2023-05-23 7:32 ` [PULL 29/50] e1000e: Rename a variable in e1000e_receive_internal() Jason Wang
2023-05-23 7:32 ` [PULL 30/50] igb: Rename a variable in igb_receive_internal() Jason Wang
2023-05-23 7:32 ` [PULL 31/50] net/eth: Use void pointers Jason Wang
2023-05-23 7:32 ` [PULL 32/50] net/eth: Always add VLAN tag Jason Wang
2023-05-23 7:32 ` [PULL 33/50] hw/net/net_rx_pkt: Enforce alignment for eth_header Jason Wang
2023-05-23 7:32 ` [PULL 34/50] tests/qtest/libqos/igb: Set GPIE.Multiple_MSIX Jason Wang
2023-05-23 7:32 ` [PULL 35/50] igb: Implement MSI-X single vector mode Jason Wang
2023-05-23 7:32 ` [PULL 36/50] igb: Use UDP for RSS hash Jason Wang
2023-05-23 7:32 ` [PULL 37/50] igb: Implement Rx SCTP CSO Jason Wang
2023-05-23 7:32 ` [PULL 38/50] igb: Implement Tx " Jason Wang
2023-05-23 7:32 ` [PULL 39/50] igb: Strip the second VLAN tag for extended VLAN Jason Wang
2023-05-23 7:32 ` [PULL 40/50] igb: Filter with " Jason Wang
2023-05-23 7:32 ` [PULL 41/50] igb: Implement igb-specific oversize check Jason Wang
2023-05-23 7:32 ` [PULL 42/50] igb: Implement Rx PTP2 timestamp Jason Wang
2023-05-23 7:32 ` [PULL 43/50] igb: Implement Tx timestamp Jason Wang
2023-05-23 7:32 ` [PULL 44/50] e1000e: Notify only new interrupts Jason Wang
2023-05-23 7:32 ` [PULL 45/50] igb: " Jason Wang
2023-05-23 7:32 ` [PULL 46/50] igb: Clear-on-read ICR when ICR.INTA is set Jason Wang
2023-05-23 7:32 ` [PULL 47/50] vmxnet3: Do not depend on PC Jason Wang
2023-05-23 7:32 ` [PULL 48/50] MAINTAINERS: Add a reviewer for network packet abstractions Jason Wang
2023-05-23 7:32 ` [PULL 49/50] docs/system/devices/igb: Note igb is tested for DPDK Jason Wang
2023-05-23 7:32 ` [PULL 50/50] rtl8139: fix large_send_mss divide-by-zero Jason Wang
2023-05-23 17:56 ` [PULL 00/50] Net patches Richard Henderson
2023-05-23 19:53 ` Michael Tokarev
2023-05-24 4:06 ` Jason Wang
2023-05-24 4:21 ` Akihiko Odaki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230523073238.54236-6-jasowang@redhat.com \
--to=jasowang@redhat.com \
--cc=akihiko.odaki@daynix.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=sriram.yagnaraman@est.tech \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).