From: Jonathan Cameron via <qemu-devel@nongnu.org>
To: <qemu-devel@nongnu.org>, Fan Ni <fan.ni@samsung.com>
Cc: "Niyas Sait" <niyas.sait@linaro.org>,
"Klaus Jensen" <its@irrelevant.dk>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Michael S . Tsirkin" <mst@redhat.com>,
"Jeremy Kerr" <jk@codeconstruct.com.au>,
"Matt Johnston" <matt@codeconstruct.com.au>,
"Shesha Bhushan Sreenivasamurthy" <sheshas@marvell.com>,
linux-cxl@vger.kernel.org, linuxarm@huawei.com,
"Viacheslav A . Dubeyko" <viacheslav.dubeyko@bytedance.com>,
"Peter Maydell" <peter.maydell@linaro.org>
Subject: [RFC PATCH 3/6] HACK: hw/arm/virt: Add ACPI support for aspeed-i2c / mctp
Date: Thu, 25 May 2023 17:08:56 +0100 [thread overview]
Message-ID: <20230525160859.32517-4-Jonathan.Cameron@huawei.com> (raw)
In-Reply-To: <20230525160859.32517-1-Jonathan.Cameron@huawei.com>
Enable this for FM-API testing for CXL devices via MCTP over I2C
Example DSDT block:
Device (MCTP)
{
Name (_HID, "PRP0001") // _HID: Hardware ID
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */,
Package (0x03)
{
Package (0x02)
{
"compatible",
"aspeed,ast2600-i2c-bus"
},
Package (0x02)
{
"bus-frequency",
0x00061A80
},
Package (0x02)
{
"mctp-controller",
One
}
}
})
Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
{
Memory32Fixed (ReadWrite,
0x0B000080, // Address Base
0x00000080, // Address Length
)
Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, )
{
0x0000002A,
}
})
}
Device (MCTS)
{
Name (_HID, "PRP0001") // _HID: Hardware ID
Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
{
I2cSerialBusV2 (0x0050, DeviceInitiated, 0x000186A0,
AddressingMode7Bit, "\\_SB.MCTP",
0x00, ResourceProducer, , Exclusive,
)
})
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */,
Package (0x01)
{
Package (0x02)
{
"compatible",
"mctp-i2c-controller"
}
}
})
}
Tests not updated given I'm not currently proposing this for upstream.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
hw/arm/virt-acpi-build.c | 60 ++++++++++++++++++++++++++++++++++++++++
hw/i2c/meson.build | 2 +-
2 files changed, 61 insertions(+), 1 deletion(-)
diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index 939a736342..2c170f75a3 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -77,6 +77,65 @@ static void acpi_dsdt_add_cpus(Aml *scope, VirtMachineState *vms)
}
}
+static void acpi_dsdt_add_mctp(Aml *scope, VirtMachineState *vms)
+{
+ uint32_t interrupt = vms->irqmap[VIRT_I2C] + ARM_SPI_BASE;
+ Aml *main_dev = aml_device("MCTP");
+ Aml *sub_dev = aml_device("MCTS");
+ Aml *dsd_pkg = aml_package(2);
+ Aml *props_pkg = aml_package(3);
+ Aml *pkg = aml_package(2);
+ Aml *crs = aml_resource_template();
+
+ aml_append(main_dev, aml_name_decl("_HID", aml_string("PRP0001")));
+
+ aml_append(pkg, aml_string("compatible"));
+ aml_append(pkg, aml_string("aspeed,ast2600-i2c-bus"));
+ aml_append(props_pkg, pkg);
+
+ pkg = aml_package(2);
+ aml_append(pkg, aml_string("bus-frequency"));
+ aml_append(pkg, aml_int(400000));
+ aml_append(props_pkg, pkg);
+
+ pkg = aml_package(2);
+ aml_append(pkg, aml_string("mctp-controller"));
+ aml_append(pkg, aml_int(1));
+ aml_append(props_pkg, pkg);
+
+ aml_append(dsd_pkg, aml_touuid("DAFFD814-6EBA-4D8C-8A91-BC9BBF4AA301"));
+ aml_append(dsd_pkg, props_pkg);
+ aml_append(main_dev, aml_name_decl("_DSD", dsd_pkg));
+
+ aml_append(crs, aml_memory32_fixed(vms->memmap[VIRT_I2C].base + 0x80,
+ 0x80, AML_READ_WRITE));
+ aml_append(crs,
+ aml_interrupt(AML_CONSUMER, AML_LEVEL, AML_ACTIVE_HIGH,
+ AML_EXCLUSIVE, &interrupt, 1));
+ aml_append(main_dev, aml_name_decl("_CRS", crs));
+
+ aml_append(sub_dev, aml_name_decl("_HID", aml_string("PRP0001")));
+
+ dsd_pkg = aml_package(2);
+ aml_append(dsd_pkg, aml_touuid("DAFFD814-6EBA-4D8C-8A91-BC9BBF4AA301"));
+
+ props_pkg = aml_package(1);
+
+ pkg = aml_package(2);
+ aml_append(pkg, aml_string("compatible"));
+ aml_append(pkg, aml_string("mctp-i2c-controller"));
+ aml_append(props_pkg, pkg);
+ aml_append(dsd_pkg, props_pkg);
+
+ crs = aml_resource_template();
+ aml_append(crs, aml_i2c_slv_serial_bus_device(0x50, "\\_SB.MCTP"));
+ aml_append(sub_dev, aml_name_decl("_CRS", crs));
+ aml_append(sub_dev, aml_name_decl("_DSD", dsd_pkg));
+
+ aml_append(scope, main_dev);
+ aml_append(scope, sub_dev);
+}
+
static void acpi_dsdt_add_uart(Aml *scope, const MemMapEntry *uart_memmap,
uint32_t uart_irq)
{
@@ -887,6 +946,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
*/
scope = aml_scope("\\_SB");
acpi_dsdt_add_cpus(scope, vms);
+ acpi_dsdt_add_mctp(scope, vms);
acpi_dsdt_add_uart(scope, &memmap[VIRT_UART],
(irqmap[VIRT_UART] + ARM_SPI_BASE));
if (vmc->acpi_expose_flash) {
diff --git a/hw/i2c/meson.build b/hw/i2c/meson.build
index fd1f9022fd..08fbbc1831 100644
--- a/hw/i2c/meson.build
+++ b/hw/i2c/meson.build
@@ -4,7 +4,7 @@ i2c_ss.add(when: 'CONFIG_MCTP_I2C', if_true: files('mctp.c'))
i2c_ss.add(when: 'CONFIG_SMBUS', if_true: files('smbus_slave.c', 'smbus_master.c'))
i2c_ss.add(when: 'CONFIG_ACPI_SMBUS', if_true: files('pm_smbus.c'))
i2c_ss.add(when: 'CONFIG_ACPI_ICH9', if_true: files('smbus_ich9.c'))
-i2c_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_i2c.c'))
+i2c_ss.add(when: 'CONFIG_I2C', if_true: files('aspeed_i2c.c'))
i2c_ss.add(when: 'CONFIG_BITBANG_I2C', if_true: files('bitbang_i2c.c'))
i2c_ss.add(when: 'CONFIG_EXYNOS4', if_true: files('exynos4210_i2c.c'))
i2c_ss.add(when: 'CONFIG_IMX_I2C', if_true: files('imx_i2c.c'))
--
2.39.2
next prev parent reply other threads:[~2023-05-25 16:10 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-25 16:08 [RFC PATCH 0/6] hw/{cxl, i386, arm}: PoC: Emulated MCTP over I2C for CXL Fabric / Device management Jonathan Cameron via
2023-05-25 16:08 ` [RFC PATCH 1/6] hw/acpi/aml-build: add function for i2c slave device serial bus description Jonathan Cameron via
2023-05-25 16:08 ` [RFC PATCH 2/6] HACK: arm/virt: Add aspeed-i2c controller and MCTP EP to enable MCTP testing Jonathan Cameron via
2023-05-25 16:08 ` Jonathan Cameron via [this message]
2023-05-25 16:08 ` [RFC PATCH 4/6] HACK: hw/i386/pc: Add Aspeed i2c controller + MCTP with ACPI tables Jonathan Cameron via
2023-05-25 16:08 ` [RFC PATCH 5/6] misc/i2c_mctp_cxl: Initial device emulation Jonathan Cameron via
2023-05-25 16:08 ` [RFC PATCH 6/6] docs: cxl: Add example commandline for MCTP CXL CCIs Jonathan Cameron via
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230525160859.32517-4-Jonathan.Cameron@huawei.com \
--to=qemu-devel@nongnu.org \
--cc=Jonathan.Cameron@huawei.com \
--cc=fan.ni@samsung.com \
--cc=its@irrelevant.dk \
--cc=jk@codeconstruct.com.au \
--cc=linux-cxl@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=matt@codeconstruct.com.au \
--cc=mst@redhat.com \
--cc=niyas.sait@linaro.org \
--cc=peter.maydell@linaro.org \
--cc=philmd@linaro.org \
--cc=sheshas@marvell.com \
--cc=viacheslav.dubeyko@bytedance.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).