qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Juan Quintela <quintela@redhat.com>
To: qemu-devel@nongnu.org
Cc: Paolo Bonzini <pbonzini@redhat.com>,
	Leonardo Bras <leobras@redhat.com>, Peter Xu <peterx@redhat.com>,
	Juan Quintela <quintela@redhat.com>
Subject: [PULL 14/21] migration/rdma: Unfold ram_control_after_iterate()
Date: Tue, 30 May 2023 20:25:24 +0200	[thread overview]
Message-ID: <20230530182531.6371-15-quintela@redhat.com> (raw)
In-Reply-To: <20230530182531.6371-1-quintela@redhat.com>

Once there:
- Remove unused data parameter
- unfold it in its callers
- change all callers to call qemu_rdma_registration_stop()

Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230509120700.78359-4-quintela@redhat.com>
---
 migration/qemu-file.h |  2 --
 migration/rdma.h      |  3 +++
 migration/qemu-file.c | 12 ------------
 migration/ram.c       | 17 ++++++++++++++---
 migration/rdma.c      |  6 ++----
 5 files changed, 19 insertions(+), 21 deletions(-)

diff --git a/migration/qemu-file.h b/migration/qemu-file.h
index ced2202137..323af5682f 100644
--- a/migration/qemu-file.h
+++ b/migration/qemu-file.h
@@ -55,7 +55,6 @@ typedef int (QEMURamSaveFunc)(QEMUFile *f,
                               size_t size);
 
 typedef struct QEMUFileHooks {
-    QEMURamHookFunc *after_ram_iterate;
     QEMURamHookFunc *hook_ram_load;
     QEMURamSaveFunc *save_page;
 } QEMUFileHooks;
@@ -130,7 +129,6 @@ void qemu_fflush(QEMUFile *f);
 void qemu_file_set_blocking(QEMUFile *f, bool block);
 int qemu_file_get_to_fd(QEMUFile *f, int fd, size_t size);
 
-void ram_control_after_iterate(QEMUFile *f, uint64_t flags);
 void ram_control_load_hook(QEMUFile *f, uint64_t flags, void *data);
 
 /* Whenever this is found in the data stream, the flags
diff --git a/migration/rdma.h b/migration/rdma.h
index 670c67a8cb..c13b94c782 100644
--- a/migration/rdma.h
+++ b/migration/rdma.h
@@ -25,8 +25,11 @@ void rdma_start_incoming_migration(const char *host_port, Error **errp);
 
 #ifdef CONFIG_RDMA
 int qemu_rdma_registration_start(QEMUFile *f, uint64_t flags);
+int qemu_rdma_registration_stop(QEMUFile *f, uint64_t flags);
 #else
 static inline
 int qemu_rdma_registration_start(QEMUFile *f, uint64_t flags) { return 0; }
+static inline
+int qemu_rdma_registration_stop(QEMUFile *f, uint64_t flags) { return 0; }
 #endif
 #endif
diff --git a/migration/qemu-file.c b/migration/qemu-file.c
index 6243d6ac59..918df83035 100644
--- a/migration/qemu-file.c
+++ b/migration/qemu-file.c
@@ -303,18 +303,6 @@ void qemu_fflush(QEMUFile *f)
     f->iovcnt = 0;
 }
 
-void ram_control_after_iterate(QEMUFile *f, uint64_t flags)
-{
-    int ret = 0;
-
-    if (f->hooks && f->hooks->after_ram_iterate) {
-        ret = f->hooks->after_ram_iterate(f, flags, NULL);
-        if (ret < 0) {
-            qemu_file_set_error(f, ret);
-        }
-    }
-}
-
 void ram_control_load_hook(QEMUFile *f, uint64_t flags, void *data)
 {
     if (f->hooks && f->hooks->hook_ram_load) {
diff --git a/migration/ram.c b/migration/ram.c
index b070278796..c6fad7b0b3 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -3017,7 +3017,11 @@ static int ram_save_setup(QEMUFile *f, void *opaque)
     if (ret < 0) {
         qemu_file_set_error(f, ret);
     }
-    ram_control_after_iterate(f, RAM_CONTROL_SETUP);
+
+    ret = qemu_rdma_registration_stop(f, RAM_CONTROL_SETUP);
+    if (ret < 0) {
+        qemu_file_set_error(f, ret);
+    }
 
     migration_ops = g_malloc0(sizeof(MigrationOps));
     migration_ops->ram_save_target_page = ram_save_target_page_legacy;
@@ -3136,7 +3140,10 @@ static int ram_save_iterate(QEMUFile *f, void *opaque)
      * Must occur before EOS (or any QEMUFile operation)
      * because of RDMA protocol.
      */
-    ram_control_after_iterate(f, RAM_CONTROL_ROUND);
+    ret = qemu_rdma_registration_stop(f, RAM_CONTROL_ROUND);
+    if (ret < 0) {
+        qemu_file_set_error(f, ret);
+    }
 
 out:
     if (ret >= 0
@@ -3209,7 +3216,11 @@ static int ram_save_complete(QEMUFile *f, void *opaque)
         qemu_mutex_unlock(&rs->bitmap_mutex);
 
         ram_flush_compressed_data(rs);
-        ram_control_after_iterate(f, RAM_CONTROL_FINISH);
+
+        int ret = qemu_rdma_registration_stop(f, RAM_CONTROL_FINISH);
+        if (ret < 0) {
+            qemu_file_set_error(f, ret);
+        }
     }
 
     if (ret < 0) {
diff --git a/migration/rdma.c b/migration/rdma.c
index 6ca89ff090..8001dcb960 100644
--- a/migration/rdma.c
+++ b/migration/rdma.c
@@ -3891,15 +3891,14 @@ int qemu_rdma_registration_start(QEMUFile *f, uint64_t flags)
  * Inform dest that dynamic registrations are done for now.
  * First, flush writes, if any.
  */
-static int qemu_rdma_registration_stop(QEMUFile *f,
-                                       uint64_t flags, void *data)
+int qemu_rdma_registration_stop(QEMUFile *f, uint64_t flags)
 {
     QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(qemu_file_get_ioc(f));
     RDMAContext *rdma;
     RDMAControlHeader head = { .len = 0, .repeat = 1 };
     int ret = 0;
 
-    if (migration_in_postcopy()) {
+    if (!migrate_rdma() || migration_in_postcopy()) {
         return 0;
     }
 
@@ -4006,7 +4005,6 @@ static const QEMUFileHooks rdma_read_hooks = {
 };
 
 static const QEMUFileHooks rdma_write_hooks = {
-    .after_ram_iterate  = qemu_rdma_registration_stop,
     .save_page          = qemu_rdma_save_page,
 };
 
-- 
2.40.1



  parent reply	other threads:[~2023-05-30 18:27 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-30 18:25 [PULL 00/21] Migration 20230530 patches Juan Quintela
2023-05-30 18:25 ` [PULL 01/21] runstate: add runstate_get() Juan Quintela
2023-05-30 18:25 ` [PULL 02/21] migration: never fail in global_state_store() Juan Quintela
2023-05-30 18:25 ` [PULL 03/21] runstate: drop unused runstate_store() Juan Quintela
2023-05-30 18:25 ` [PULL 04/21] migration: switch from .vm_was_running to .vm_old_state Juan Quintela
2023-05-30 18:25 ` [PULL 05/21] migration: restore vmstate on migration failure Juan Quintela
2023-05-30 18:25 ` [PULL 06/21] migration: Don't abuse qemu_file transferred for RDMA Juan Quintela
2023-05-30 18:25 ` [PULL 07/21] migration/RDMA: It is accounting for zero/normal pages in two places Juan Quintela
2023-05-30 18:25 ` [PULL 08/21] migration/rdma: Remove QEMUFile parameter when not used Juan Quintela
2023-05-30 18:25 ` [PULL 09/21] migration/rdma: Don't use imaginary transfers Juan Quintela
2023-05-30 18:25 ` [PULL 10/21] migration: Remove unused qemu_file_credit_transfer() Juan Quintela
2023-05-30 18:25 ` [PULL 11/21] migration/rdma: Simplify the function that saves a page Juan Quintela
2023-05-30 18:25 ` [PULL 12/21] migration: Create migrate_rdma() Juan Quintela
2023-05-30 18:25 ` [PULL 13/21] migration/rdma: Unfold ram_control_before_iterate() Juan Quintela
2023-06-01  8:57   ` Daniel P. Berrangé
2023-05-30 18:25 ` Juan Quintela [this message]
2023-06-01  8:58   ` [PULL 14/21] migration/rdma: Unfold ram_control_after_iterate() Daniel P. Berrangé
2023-05-30 18:25 ` [PULL 15/21] migration/rdma: Remove all uses of RAM_CONTROL_HOOK Juan Quintela
2023-06-01  9:01   ` Daniel P. Berrangé
2023-05-30 18:25 ` [PULL 16/21] migration/rdma: Unfold hook_ram_load() Juan Quintela
2023-06-01  9:02   ` Daniel P. Berrangé
2023-05-30 18:25 ` [PULL 17/21] migration/rdma: Create rdma_control_save_page() Juan Quintela
2023-05-30 18:25 ` [PULL 18/21] qemu-file: Remove QEMUFileHooks Juan Quintela
2023-05-30 18:25 ` [PULL 19/21] migration/rdma: Move rdma constants from qemu-file.h to rdma.h Juan Quintela
2023-05-30 18:25 ` [PULL 20/21] migration/rdma: Remove qemu_ prefix from exported functions Juan Quintela
2023-05-30 18:25 ` [PULL 21/21] migration/rdma: Check sooner if we are in postcopy for save_page() Juan Quintela
2023-05-30 20:23 ` [PULL 00/21] Migration 20230530 patches Richard Henderson
2023-05-31  7:28   ` Juan Quintela
2023-05-31  9:10   ` Juan Quintela
     [not found]   ` <87mt1ktdr8.fsf@secure.mitica>
2023-05-31 21:28     ` Richard Henderson
2023-06-01  6:47       ` Juan Quintela
2023-06-01  8:27     ` Daniel P. Berrangé
2023-06-01  9:05       ` Daniel P. Berrangé
2023-06-01 11:46         ` Juan Quintela
  -- strict thread matches above, loose matches on Subject: below --
2023-05-30 11:54 Juan Quintela
2023-05-30 11:54 ` [PULL 14/21] migration/rdma: Unfold ram_control_after_iterate() Juan Quintela

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230530182531.6371-15-quintela@redhat.com \
    --to=quintela@redhat.com \
    --cc=leobras@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=peterx@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).