From: "Philippe Mathieu-Daudé" <philmd@linaro.org>
To: qemu-devel@nongnu.org
Cc: "Thomas Huth" <thuth@redhat.com>,
qemu-arm@nongnu.org, qemu-ppc@nongnu.org,
"Eduardo Habkost" <eduardo@habkost.net>,
"Markus Armbruster" <armbru@redhat.com>,
"Marc-André Lureau" <marcandre.lureau@redhat.com>,
"Mark Cave-Ayland" <mark.cave-ayland@ilande.co.uk>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>
Subject: [PATCH 7/7] hw: Simplify using sysbus_init_irqs() [manual]
Date: Thu, 1 Jun 2023 00:33:41 +0200 [thread overview]
Message-ID: <20230531223341.34827-8-philmd@linaro.org> (raw)
In-Reply-To: <20230531223341.34827-1-philmd@linaro.org>
Audit the sysbus_init_irq() calls and manually convert
to sysbus_init_irqs() when a loop is involved.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
hw/intc/loongarch_extioi.c | 3 +--
hw/intc/omap_intc.c | 3 +--
hw/pci-host/gpex.c | 2 +-
hw/timer/renesas_tmr.c | 9 +++------
4 files changed, 6 insertions(+), 11 deletions(-)
diff --git a/hw/intc/loongarch_extioi.c b/hw/intc/loongarch_extioi.c
index db941de20e..c579636215 100644
--- a/hw/intc/loongarch_extioi.c
+++ b/hw/intc/loongarch_extioi.c
@@ -275,8 +275,7 @@ static void loongarch_extioi_instance_init(Object *obj)
LoongArchExtIOI *s = LOONGARCH_EXTIOI(obj);
int cpu, pin;
- sysbus_init_irqs(SYS_BUS_DEVICE(dev), s->irq, EXTIOI_IRQS);
-
+ sysbus_init_irqs(dev, s->irq, EXTIOI_IRQS);
qdev_init_gpio_in(DEVICE(obj), extioi_setirq, EXTIOI_IRQS);
for (cpu = 0; cpu < EXTIOI_CPUS; cpu++) {
diff --git a/hw/intc/omap_intc.c b/hw/intc/omap_intc.c
index 647bf324a8..f324b640e3 100644
--- a/hw/intc/omap_intc.c
+++ b/hw/intc/omap_intc.c
@@ -627,8 +627,7 @@ static void omap2_intc_init(Object *obj)
s->level_only = 1;
s->nbanks = 3;
- sysbus_init_irq(sbd, &s->parent_intr[0]);
- sysbus_init_irq(sbd, &s->parent_intr[1]);
+ sysbus_init_irqs(sbd, s->parent_intr, ARRAY_SIZE(s->parent_intr));
qdev_init_gpio_in(dev, omap_set_intr_noedge, s->nbanks * 32);
memory_region_init_io(&s->mmio, obj, &omap2_inth_mem_ops, s,
"omap2-intc", 0x1000);
diff --git a/hw/pci-host/gpex.c b/hw/pci-host/gpex.c
index a6752fac5e..7b46e3e36e 100644
--- a/hw/pci-host/gpex.c
+++ b/hw/pci-host/gpex.c
@@ -128,8 +128,8 @@ static void gpex_host_realize(DeviceState *dev, Error **errp)
sysbus_init_mmio(sbd, &s->io_ioport);
}
+ sysbus_init_irqs(sbd, s->irq, GPEX_NUM_IRQS);
for (i = 0; i < GPEX_NUM_IRQS; i++) {
- sysbus_init_irq(sbd, &s->irq[i]);
s->irq_num[i] = -1;
}
diff --git a/hw/timer/renesas_tmr.c b/hw/timer/renesas_tmr.c
index c15f654738..dd2929d6e7 100644
--- a/hw/timer/renesas_tmr.c
+++ b/hw/timer/renesas_tmr.c
@@ -428,17 +428,14 @@ static void rtmr_init(Object *obj)
{
SysBusDevice *d = SYS_BUS_DEVICE(obj);
RTMRState *tmr = RTMR(obj);
- int i;
memory_region_init_io(&tmr->memory, OBJECT(tmr), &tmr_ops,
tmr, "renesas-tmr", 0x10);
sysbus_init_mmio(d, &tmr->memory);
- for (i = 0; i < ARRAY_SIZE(tmr->ovi); i++) {
- sysbus_init_irq(d, &tmr->cmia[i]);
- sysbus_init_irq(d, &tmr->cmib[i]);
- sysbus_init_irq(d, &tmr->ovi[i]);
- }
+ sysbus_init_irqs(d, tmr->cmia, ARRAY_SIZE(tmr->cmia));
+ sysbus_init_irqs(d, tmr->cmib, ARRAY_SIZE(tmr->cmib));
+ sysbus_init_irqs(d, tmr->ovi, ARRAY_SIZE(tmr->ovi));
timer_init_ns(&tmr->timer[0], QEMU_CLOCK_VIRTUAL, timer_event0, tmr);
timer_init_ns(&tmr->timer[1], QEMU_CLOCK_VIRTUAL, timer_event1, tmr);
}
--
2.38.1
next prev parent reply other threads:[~2023-05-31 22:36 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-31 22:33 [PATCH 0/7] hw/sysbus: Add sysbus_init_irqs and reduce SYSBUS_DEVICE_GPIO_IRQ scope Philippe Mathieu-Daudé
2023-05-31 22:33 ` [PATCH 1/7] hw/arm/xlnx-versal: Do not open-code sysbus_connect_irq() Philippe Mathieu-Daudé
2023-06-01 3:02 ` Richard Henderson
2023-05-31 22:33 ` [PATCH 2/7] hw/usb/xlnx: Do not open-code sysbus_pass_irq() Philippe Mathieu-Daudé
2023-06-01 3:04 ` Richard Henderson
2023-05-31 22:33 ` [PATCH 3/7] hw/sysbus: Introduce sysbus_init_irqs() Philippe Mathieu-Daudé
2023-06-01 3:08 ` Richard Henderson
2023-05-31 22:33 ` [PATCH 4/7] hw/usb/hcd-xhci: Use sysbus_init_irqs() Philippe Mathieu-Daudé
2023-06-01 3:09 ` Richard Henderson
2023-05-31 22:33 ` [PATCH 5/7] hw/sysbus: Make SYSBUS_DEVICE_GPIO_IRQ API internal Philippe Mathieu-Daudé
2023-06-01 3:10 ` Richard Henderson
2023-05-31 22:33 ` [PATCH 6/7] hw: Simplify using sysbus_init_irqs() [automatic] Philippe Mathieu-Daudé
2023-06-01 3:11 ` Richard Henderson
2023-05-31 22:33 ` Philippe Mathieu-Daudé [this message]
2023-06-01 3:13 ` [PATCH 7/7] hw: Simplify using sysbus_init_irqs() [manual] Richard Henderson
2023-06-01 5:59 ` Markus Armbruster
2023-06-01 8:58 ` Philippe Mathieu-Daudé
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230531223341.34827-8-philmd@linaro.org \
--to=philmd@linaro.org \
--cc=armbru@redhat.com \
--cc=eduardo@habkost.net \
--cc=marcandre.lureau@redhat.com \
--cc=mark.cave-ayland@ilande.co.uk \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).