qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Nicholas Piggin <npiggin@gmail.com>
To: Daniel Henrique Barboza <danielhb413@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>,
	Richard Henderson <richard.henderson@linaro.org>,
	qemu-ppc@nongnu.org, qemu-devel@nongnu.org,
	qemu-stable@nongnu.org
Subject: [PATCH 2/4] target/ppc: Ensure stcx size matches larx
Date: Sun,  4 Jun 2023 20:28:55 +1000	[thread overview]
Message-ID: <20230604102858.148584-2-npiggin@gmail.com> (raw)
In-Reply-To: <20230604102858.148584-1-npiggin@gmail.com>

Differently-sized larx/stcx. pairs can succeed if the starting address
matches. Add a size check to require stcx. exactly match the larx that
established the reservation.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 target/ppc/cpu.h       | 1 +
 target/ppc/cpu_init.c  | 4 ++--
 target/ppc/translate.c | 8 ++++++++
 3 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/target/ppc/cpu.h b/target/ppc/cpu.h
index 7959bfed0a..1d71f325d8 100644
--- a/target/ppc/cpu.h
+++ b/target/ppc/cpu.h
@@ -1124,6 +1124,7 @@ struct CPUArchState {
     target_ulong ca32;
 
     target_ulong reserve_addr; /* Reservation address */
+    target_ulong reserve_size; /* Reservation size */
     target_ulong reserve_val;  /* Reservation value */
     target_ulong reserve_val2;
 
diff --git a/target/ppc/cpu_init.c b/target/ppc/cpu_init.c
index 944a74befe..082981b148 100644
--- a/target/ppc/cpu_init.c
+++ b/target/ppc/cpu_init.c
@@ -7421,8 +7421,8 @@ void ppc_cpu_dump_state(CPUState *cs, FILE *f, int flags)
         }
         qemu_fprintf(f, " %c%c", a, env->crf[i] & 0x01 ? 'O' : ' ');
     }
-    qemu_fprintf(f, " ]             RES " TARGET_FMT_lx "\n",
-                 env->reserve_addr);
+    qemu_fprintf(f, " ]     RES %03x@" TARGET_FMT_lx "\n",
+                 (int)env->reserve_size, env->reserve_addr);
 
     if (flags & CPU_DUMP_FPU) {
         for (i = 0; i < 32; i++) {
diff --git a/target/ppc/translate.c b/target/ppc/translate.c
index e129cdcb8f..5195047146 100644
--- a/target/ppc/translate.c
+++ b/target/ppc/translate.c
@@ -71,6 +71,7 @@ static TCGv cpu_cfar;
 #endif
 static TCGv cpu_xer, cpu_so, cpu_ov, cpu_ca, cpu_ov32, cpu_ca32;
 static TCGv cpu_reserve;
+static TCGv cpu_reserve_size;
 static TCGv cpu_reserve_val;
 static TCGv cpu_reserve_val2;
 static TCGv cpu_fpscr;
@@ -141,6 +142,9 @@ void ppc_translate_init(void)
     cpu_reserve = tcg_global_mem_new(cpu_env,
                                      offsetof(CPUPPCState, reserve_addr),
                                      "reserve_addr");
+    cpu_reserve_size = tcg_global_mem_new(cpu_env,
+                                          offsetof(CPUPPCState, reserve_size),
+                                          "reserve_size");
     cpu_reserve_val = tcg_global_mem_new(cpu_env,
                                          offsetof(CPUPPCState, reserve_val),
                                          "reserve_val");
@@ -3584,6 +3588,7 @@ static void gen_load_locked(DisasContext *ctx, MemOp memop)
     gen_set_access_type(ctx, ACCESS_RES);
     gen_addr_reg_index(ctx, t0);
     tcg_gen_mov_tl(cpu_reserve, t0);
+    tcg_gen_movi_tl(cpu_reserve_size, memop_size(memop));
     tcg_gen_qemu_ld_tl(gpr, t0, ctx->mem_idx, memop | MO_ALIGN);
     tcg_gen_mov_tl(cpu_reserve_val, gpr);
     tcg_gen_mb(TCG_MO_ALL | TCG_BAR_LDAQ);
@@ -3816,6 +3821,7 @@ static void gen_conditional_store(DisasContext *ctx, MemOp memop)
     gen_set_access_type(ctx, ACCESS_RES);
     gen_addr_reg_index(ctx, t0);
     tcg_gen_brcond_tl(TCG_COND_NE, t0, cpu_reserve, l1);
+    tcg_gen_brcondi_tl(TCG_COND_NE, cpu_reserve_size, memop_size(memop), l1);
 
     t0 = tcg_temp_new();
     tcg_gen_atomic_cmpxchg_tl(t0, cpu_reserve, cpu_reserve_val,
@@ -3873,6 +3879,7 @@ static void gen_lqarx(DisasContext *ctx)
     EA = tcg_temp_new();
     gen_addr_reg_index(ctx, EA);
     tcg_gen_mov_tl(cpu_reserve, EA);
+    tcg_gen_movi_tl(cpu_reserve_size, 128);
 
     /* Note that the low part is always in RD+1, even in LE mode.  */
     lo = cpu_gpr[rd + 1];
@@ -3907,6 +3914,7 @@ static void gen_stqcx_(DisasContext *ctx)
     gen_addr_reg_index(ctx, EA);
 
     tcg_gen_brcond_tl(TCG_COND_NE, EA, cpu_reserve, lab_fail);
+    tcg_gen_brcondi_tl(TCG_COND_NE, cpu_reserve_size, 128, lab_fail);
 
     cmp = tcg_temp_new_i128();
     val = tcg_temp_new_i128();
-- 
2.40.1



  reply	other threads:[~2023-06-04 10:30 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-04 10:28 [PATCH 1/4] target/ppc: Fix lqarx to set cpu_reserve Nicholas Piggin
2023-06-04 10:28 ` Nicholas Piggin [this message]
2023-06-04 16:58   ` [PATCH 2/4] target/ppc: Ensure stcx size matches larx Richard Henderson
2023-06-05  6:27   ` Nicholas Piggin
2023-06-19 15:48     ` Richard Henderson
2023-06-19 15:55       ` Peter Maydell
2023-06-19 17:02         ` Richard Henderson
2023-06-19 17:14           ` Peter Maydell
2023-06-20  3:39             ` Nicholas Piggin
2023-06-04 10:28 ` [PATCH 3/4] target/ppc: Remove larx/stcx. memory barrier semantics Nicholas Piggin
2023-06-04 16:12   ` Richard Henderson
2023-06-04 10:28 ` [PATCH 4/4] target/ppc: Rework store conditional to avoid branch Nicholas Piggin
2023-06-04 16:22   ` Richard Henderson
2023-06-04 16:05 ` [PATCH 1/4] target/ppc: Fix lqarx to set cpu_reserve Richard Henderson
2023-06-05  2:33   ` Nicholas Piggin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230604102858.148584-2-npiggin@gmail.com \
    --to=npiggin@gmail.com \
    --cc=danielhb413@gmail.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    --cc=qemu-stable@nongnu.org \
    --cc=richard.henderson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).