From: Hanna Czenczek <hreitz@redhat.com>
To: qemu-block@nongnu.org
Cc: qemu-devel@nongnu.org, Hanna Czenczek <hreitz@redhat.com>,
Kevin Wolf <kwolf@redhat.com>,
Richard Henderson <richard.henderson@linaro.org>
Subject: [PULL 14/17] parallels: Move statistic collection to a separate function
Date: Mon, 5 Jun 2023 17:45:38 +0200 [thread overview]
Message-ID: <20230605154541.1043261-15-hreitz@redhat.com> (raw)
In-Reply-To: <20230605154541.1043261-1-hreitz@redhat.com>
From: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
We will add more and more checks so we need a better code structure
in parallels_co_check. Let each check performs in a separate loop
in a separate helper.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20230424093147.197643-11-alexander.ivanov@virtuozzo.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
---
block/parallels.c | 52 +++++++++++++++++++++++++++--------------------
1 file changed, 30 insertions(+), 22 deletions(-)
diff --git a/block/parallels.c b/block/parallels.c
index ba766e5e86..bb279ddc70 100644
--- a/block/parallels.c
+++ b/block/parallels.c
@@ -524,35 +524,20 @@ parallels_check_leak(BlockDriverState *bs, BdrvCheckResult *res,
return 0;
}
-static int coroutine_fn GRAPH_RDLOCK
-parallels_co_check(BlockDriverState *bs, BdrvCheckResult *res,
- BdrvCheckMode fix)
+static void parallels_collect_statistics(BlockDriverState *bs,
+ BdrvCheckResult *res,
+ BdrvCheckMode fix)
{
BDRVParallelsState *s = bs->opaque;
- int64_t prev_off;
- int ret;
+ int64_t off, prev_off;
uint32_t i;
- qemu_co_mutex_lock(&s->lock);
-
- parallels_check_unclean(bs, res, fix);
-
- ret = parallels_check_outside_image(bs, res, fix);
- if (ret < 0) {
- goto out;
- }
-
- ret = parallels_check_leak(bs, res, fix);
- if (ret < 0) {
- goto out;
- }
-
res->bfi.total_clusters = s->bat_size;
res->bfi.compressed_clusters = 0; /* compression is not supported */
prev_off = 0;
for (i = 0; i < s->bat_size; i++) {
- int64_t off = bat2sect(s, i) << BDRV_SECTOR_BITS;
+ off = bat2sect(s, i) << BDRV_SECTOR_BITS;
/*
* If BDRV_FIX_ERRORS is not set, out-of-image BAT entries were not
* fixed. Skip not allocated and out-of-image BAT entries.
@@ -562,13 +547,36 @@ parallels_co_check(BlockDriverState *bs, BdrvCheckResult *res,
continue;
}
- res->bfi.allocated_clusters++;
-
if (prev_off != 0 && (prev_off + s->cluster_size) != off) {
res->bfi.fragmented_clusters++;
}
prev_off = off;
+ res->bfi.allocated_clusters++;
}
+}
+
+static int coroutine_fn GRAPH_RDLOCK
+parallels_co_check(BlockDriverState *bs, BdrvCheckResult *res,
+ BdrvCheckMode fix)
+{
+ BDRVParallelsState *s = bs->opaque;
+ int ret;
+
+ qemu_co_mutex_lock(&s->lock);
+
+ parallels_check_unclean(bs, res, fix);
+
+ ret = parallels_check_outside_image(bs, res, fix);
+ if (ret < 0) {
+ goto out;
+ }
+
+ ret = parallels_check_leak(bs, res, fix);
+ if (ret < 0) {
+ goto out;
+ }
+
+ parallels_collect_statistics(bs, res, fix);
out:
qemu_co_mutex_unlock(&s->lock);
--
2.40.1
next prev parent reply other threads:[~2023-06-05 15:48 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-05 15:45 [PULL 00/17] Block patches Hanna Czenczek
2023-06-05 15:45 ` [PULL 01/17] util/iov: Make qiov_slice() public Hanna Czenczek
2023-06-05 15:45 ` [PULL 02/17] block: Collapse padded I/O vecs exceeding IOV_MAX Hanna Czenczek
2023-06-06 8:00 ` Michael Tokarev
2023-06-06 8:45 ` Hanna Czenczek
2023-06-06 10:47 ` Michael Tokarev
2023-06-08 9:52 ` Peter Maydell
2023-06-09 7:45 ` Hanna Czenczek
2023-06-05 15:45 ` [PULL 03/17] util/iov: Remove qemu_iovec_init_extended() Hanna Czenczek
2023-06-05 15:45 ` [PULL 04/17] iotests/iov-padding: New test Hanna Czenczek
2023-06-05 15:45 ` [PULL 05/17] parallels: Out of image offset in BAT leads to image inflation Hanna Czenczek
2023-06-07 6:51 ` Michael Tokarev
2023-06-07 8:47 ` Michael Tokarev
2023-06-07 15:14 ` Hanna Czenczek
2023-06-09 8:54 ` Denis V. Lunev
2023-06-09 9:05 ` Michael Tokarev
2023-06-05 15:45 ` [PULL 06/17] parallels: Fix high_off calculation in parallels_co_check() Hanna Czenczek
2023-06-05 15:45 ` [PULL 07/17] parallels: Fix image_end_offset and data_end after out-of-image check Hanna Czenczek
2023-06-05 15:45 ` [PULL 08/17] parallels: create parallels_set_bat_entry_helper() to assign BAT value Hanna Czenczek
2023-06-05 15:45 ` [PULL 09/17] parallels: Use generic infrastructure for BAT writing in parallels_co_check() Hanna Czenczek
2023-06-05 15:45 ` [PULL 10/17] parallels: Move check of unclean image to a separate function Hanna Czenczek
2023-06-05 15:45 ` [PULL 11/17] parallels: Move check of cluster outside " Hanna Czenczek
2023-06-05 15:45 ` [PULL 12/17] parallels: Fix statistics calculation Hanna Czenczek
2023-06-05 15:45 ` [PULL 13/17] parallels: Move check of leaks to a separate function Hanna Czenczek
2023-06-05 15:45 ` Hanna Czenczek [this message]
2023-06-05 15:45 ` [PULL 15/17] parallels: Replace qemu_co_mutex_lock by WITH_QEMU_LOCK_GUARD Hanna Czenczek
2023-06-05 15:45 ` [PULL 16/17] parallels: Incorrect condition in out-of-image check Hanna Czenczek
2023-06-05 15:45 ` [PULL 17/17] qcow2: add discard-no-unref option Hanna Czenczek
2023-06-05 19:03 ` [PULL 00/17] Block patches Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230605154541.1043261-15-hreitz@redhat.com \
--to=hreitz@redhat.com \
--cc=kwolf@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).