From: Siarhei Volkau <lis8215@gmail.com>
To: qemu-devel@nongnu.org
Cc: "Aleksandar Rikalo" <aleksandar.rikalo@syrmia.com>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Aurelien Jarno" <aurelien@aurel32.net>,
"Stefan Markovic" <smarkovic@wavecomp.com>,
"Aleksandar Markovic" <amarkovic@wavecomp.com>,
"Jiaxun Yang" <jiaxun.yang@flygoat.com>,
"Siarhei Volkau" <lis8215@gmail.com>
Subject: [PATCH 09/33] target/mips: Add emulation of MXU S32CPS D16CPS Q8ABD Q16SAT insns
Date: Thu, 8 Jun 2023 13:41:58 +0300 [thread overview]
Message-ID: <20230608104222.1520143-10-lis8215@gmail.com> (raw)
In-Reply-To: <20230608104222.1520143-1-lis8215@gmail.com>
These instructions are part of pool2, see the grand tree above
in the file.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
---
target/mips/tcg/mxu_translate.c | 296 +++++++++++++++++++++++++++++++-
1 file changed, 293 insertions(+), 3 deletions(-)
diff --git a/target/mips/tcg/mxu_translate.c b/target/mips/tcg/mxu_translate.c
index 2eebdfe8ca..b3e3937545 100644
--- a/target/mips/tcg/mxu_translate.c
+++ b/target/mips/tcg/mxu_translate.c
@@ -361,6 +361,7 @@ enum {
OPC_MXU_S32MSUB = 0x04,
OPC_MXU_S32MSUBU = 0x05,
OPC_MXU__POOL01 = 0x06,
+ OPC_MXU__POOL02 = 0x07,
OPC_MXU_D16MUL = 0x08,
OPC_MXU_D16MAC = 0x0A,
OPC_MXU__POOL04 = 0x10,
@@ -407,6 +408,16 @@ enum {
OPC_MXU_Q8ADD = 0x07,
};
+/*
+ * MXU pool 02
+ */
+enum {
+ OPC_MXU_S32CPS = 0x00,
+ OPC_MXU_D16CPS = 0x02,
+ OPC_MXU_Q8ABD = 0x04,
+ OPC_MXU_Q16SAT = 0x06,
+};
+
/*
* MXU pool 04 05 06 07 08 09 10 11
*/
@@ -1677,11 +1688,154 @@ static void gen_mxu_q8avg(DisasContext *ctx, bool round45)
/*
- * MXU instruction category: Arithmetic
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ * MXU instruction category: Addition and subtraction
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
- * Q8ADD
+ * S32CPS D16CPS
+ * Q8ADD
+ */
+
+/*
+ * S32CPS
+ * Update XRa if XRc < 0 by value of 0 - XRb
+ * else XRa = XRb
+ */
+static void gen_mxu_S32CPS(DisasContext *ctx)
+{
+ uint32_t pad, XRc, XRb, XRa;
+
+ pad = extract32(ctx->opcode, 21, 5);
+ XRc = extract32(ctx->opcode, 14, 4);
+ XRb = extract32(ctx->opcode, 10, 4);
+ XRa = extract32(ctx->opcode, 6, 4);
+
+ if (unlikely(pad != 0)) {
+ /* opcode padding incorrect -> do nothing */
+ } else if (unlikely(XRa == 0)) {
+ /* destination is zero register -> do nothing */
+ } else if (unlikely(XRb == 0)) {
+ /* XRc make no sense 0 - 0 = 0 -> just set destination to zero */
+ tcg_gen_movi_tl(mxu_gpr[XRa - 1], 0);
+ } else if (unlikely(XRc == 0)) {
+ /* condition always false -> just move XRb to XRa */
+ tcg_gen_mov_tl(mxu_gpr[XRa - 1], mxu_gpr[XRb - 1]);
+ } else {
+ /* the most general case */
+ TCGv t0 = tcg_temp_new();
+ TCGLabel *l_not_less = gen_new_label();
+ TCGLabel *l_done = gen_new_label();
+
+ tcg_gen_brcondi_tl(TCG_COND_GE, mxu_gpr[XRc - 1], 0, l_not_less);
+ tcg_gen_neg_tl(t0, mxu_gpr[XRb - 1]);
+ tcg_gen_br(l_done);
+ gen_set_label(l_not_less);
+ gen_load_mxu_gpr(t0, XRb);
+ gen_set_label(l_done);
+ gen_store_mxu_gpr(t0, XRa);
+ }
+}
+
+/*
+ * D16CPS
+ * Update XRa[0..1] if XRc[0..1] < 0 by value of 0 - XRb[0..1]
+ * else XRa[0..1] = XRb[0..1]
*/
+static void gen_mxu_D16CPS(DisasContext *ctx)
+{
+ uint32_t pad, XRc, XRb, XRa;
+
+ pad = extract32(ctx->opcode, 21, 5);
+ XRc = extract32(ctx->opcode, 14, 4);
+ XRb = extract32(ctx->opcode, 10, 4);
+ XRa = extract32(ctx->opcode, 6, 4);
+
+ if (unlikely(pad != 0)) {
+ /* opcode padding incorrect -> do nothing */
+ } else if (unlikely(XRa == 0)) {
+ /* destination is zero register -> do nothing */
+ } else if (unlikely(XRb == 0)) {
+ /* XRc make no sense 0 - 0 = 0 -> just set destination to zero */
+ tcg_gen_movi_tl(mxu_gpr[XRa - 1], 0);
+ } else if (unlikely(XRc == 0)) {
+ /* condition always false -> just move XRb to XRa */
+ tcg_gen_mov_tl(mxu_gpr[XRa - 1], mxu_gpr[XRb - 1]);
+ } else {
+ /* the most general case */
+ TCGv t0 = tcg_temp_new();
+ TCGv t1 = tcg_temp_new();
+ TCGLabel *l_done_hi = gen_new_label();
+ TCGLabel *l_not_less_lo = gen_new_label();
+ TCGLabel *l_done_lo = gen_new_label();
+
+ tcg_gen_sextract_tl(t0, mxu_gpr[XRc - 1], 16, 16);
+ tcg_gen_sextract_tl(t1, mxu_gpr[XRb - 1], 16, 16);
+ tcg_gen_brcondi_tl(TCG_COND_GE, t0, 0, l_done_hi);
+ tcg_gen_subfi_tl(t1, 0, t1);
+
+ gen_set_label(l_done_hi);
+ tcg_gen_shli_i32(t1, t1, 16);
+
+ tcg_gen_sextract_tl(t0, mxu_gpr[XRc - 1], 0, 16);
+ tcg_gen_brcondi_tl(TCG_COND_GE, t0, 0, l_not_less_lo);
+ tcg_gen_sextract_tl(t0, mxu_gpr[XRb - 1], 0, 16);
+ tcg_gen_subfi_tl(t0, 0, t0);
+ tcg_gen_br(l_done_lo);
+
+ gen_set_label(l_not_less_lo);
+ tcg_gen_extract_tl(t0, mxu_gpr[XRb - 1], 0, 16);
+
+ gen_set_label(l_done_lo);
+ tcg_gen_deposit_tl(mxu_gpr[XRa - 1], t1, t0, 0, 16);
+ }
+}
+
+/*
+ * Q8ABD XRa, XRb, XRc
+ * Gets absolute difference for quadruple of 8-bit
+ * packed in XRb to another one in XRc,
+ * put the result in XRa.
+ * a.k.a. XRa[0..3] = abs(XRb[0..3] - XRc[0..3]);
+ */
+static void gen_mxu_Q8ABD(DisasContext *ctx)
+{
+ uint32_t pad, XRc, XRb, XRa;
+
+ pad = extract32(ctx->opcode, 21, 3);
+ XRc = extract32(ctx->opcode, 14, 4);
+ XRb = extract32(ctx->opcode, 10, 4);
+ XRa = extract32(ctx->opcode, 6, 4);
+
+ if (unlikely(pad != 0)) {
+ /* opcode padding incorrect -> do nothing */
+ } else if (unlikely(XRa == 0)) {
+ /* destination is zero register -> do nothing */
+ } else if (unlikely((XRb == 0) && (XRc == 0))) {
+ /* both operands zero registers -> just set destination to zero */
+ tcg_gen_movi_tl(mxu_gpr[XRa - 1], 0);
+ } else {
+ /* the most general case */
+ TCGv t0 = tcg_temp_new();
+ TCGv t1 = tcg_temp_new();
+ TCGv t2 = tcg_temp_new();
+ TCGv t3 = tcg_temp_new();
+ TCGv t4 = tcg_temp_new();
+
+ gen_load_mxu_gpr(t3, XRb);
+ gen_load_mxu_gpr(t4, XRc);
+ tcg_gen_movi_tl(t2, 0);
+
+ for (int i = 0; i < 4; i++) {
+ tcg_gen_extract_tl(t0, t3, 8 * i, 8);
+ tcg_gen_extract_tl(t1, t4, 8 * i, 8);
+
+ tcg_gen_sub_tl(t0, t0, t1);
+ tcg_gen_abs_tl(t0, t0);
+
+ tcg_gen_deposit_tl(t2, t2, t0, 8 * i, 8);
+ }
+ gen_store_mxu_gpr(t2, XRa);
+ }
+}
/*
* Q8ADD XRa, XRb, XRc, ptn2
@@ -1748,6 +1902,114 @@ static void gen_mxu_Q8ADD(DisasContext *ctx)
}
}
+/*
+ * MXU instruction category: Miscellaneous
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * Q16SAT
+ */
+
+/*
+ * Q16SAT XRa, XRb, XRc
+ * Packs four 16-bit signed integers in XRb and XRc to
+ * four saturated unsigned 8-bit into XRa.
+ *
+ */
+static void gen_mxu_Q16SAT(DisasContext *ctx)
+{
+ uint32_t pad, XRc, XRb, XRa;
+
+ pad = extract32(ctx->opcode, 21, 3);
+ XRc = extract32(ctx->opcode, 14, 4);
+ XRb = extract32(ctx->opcode, 10, 4);
+ XRa = extract32(ctx->opcode, 6, 4);
+
+ if (unlikely(pad != 0)) {
+ /* opcode padding incorrect -> do nothing */
+ } else if (unlikely(XRa == 0)) {
+ /* destination is zero register -> do nothing */
+ } else {
+ /* the most general case */
+ TCGv t0 = tcg_temp_new();
+ TCGv t1 = tcg_temp_new();
+ TCGv t2 = tcg_temp_new();
+
+ tcg_gen_movi_tl(t2, 0);
+ if (XRb != 0) {
+ TCGLabel *l_less_hi = gen_new_label();
+ TCGLabel *l_less_lo = gen_new_label();
+ TCGLabel *l_lo = gen_new_label();
+ TCGLabel *l_greater_hi = gen_new_label();
+ TCGLabel *l_greater_lo = gen_new_label();
+ TCGLabel *l_done = gen_new_label();
+
+ tcg_gen_sari_tl(t0, mxu_gpr[XRb - 1], 16);
+ tcg_gen_brcondi_tl(TCG_COND_LT, t0, 0, l_less_hi);
+ tcg_gen_brcondi_tl(TCG_COND_GT, t0, 255, l_greater_hi);
+ tcg_gen_br(l_lo);
+ gen_set_label(l_less_hi);
+ tcg_gen_movi_tl(t0, 0);
+ tcg_gen_br(l_lo);
+ gen_set_label(l_greater_hi);
+ tcg_gen_movi_tl(t0, 255);
+
+ gen_set_label(l_lo);
+ tcg_gen_shli_tl(t1, mxu_gpr[XRb - 1], 16);
+ tcg_gen_sari_tl(t1, t1, 16);
+ tcg_gen_brcondi_tl(TCG_COND_LT, t1, 0, l_less_lo);
+ tcg_gen_brcondi_tl(TCG_COND_GT, t1, 255, l_greater_lo);
+ tcg_gen_br(l_done);
+ gen_set_label(l_less_lo);
+ tcg_gen_movi_tl(t1, 0);
+ tcg_gen_br(l_done);
+ gen_set_label(l_greater_lo);
+ tcg_gen_movi_tl(t1, 255);
+
+ gen_set_label(l_done);
+ tcg_gen_shli_tl(t2, t0, 24);
+ tcg_gen_shli_tl(t1, t1, 16);
+ tcg_gen_or_tl(t2, t2, t1);
+ }
+
+ if (XRc != 0) {
+ TCGLabel *l_less_hi = gen_new_label();
+ TCGLabel *l_less_lo = gen_new_label();
+ TCGLabel *l_lo = gen_new_label();
+ TCGLabel *l_greater_hi = gen_new_label();
+ TCGLabel *l_greater_lo = gen_new_label();
+ TCGLabel *l_done = gen_new_label();
+
+ tcg_gen_sari_tl(t0, mxu_gpr[XRc - 1], 16);
+ tcg_gen_brcondi_tl(TCG_COND_LT, t0, 0, l_less_hi);
+ tcg_gen_brcondi_tl(TCG_COND_GT, t0, 255, l_greater_hi);
+ tcg_gen_br(l_lo);
+ gen_set_label(l_less_hi);
+ tcg_gen_movi_tl(t0, 0);
+ tcg_gen_br(l_lo);
+ gen_set_label(l_greater_hi);
+ tcg_gen_movi_tl(t0, 255);
+
+ gen_set_label(l_lo);
+ tcg_gen_shli_tl(t1, mxu_gpr[XRc - 1], 16);
+ tcg_gen_sari_tl(t1, t1, 16);
+ tcg_gen_brcondi_tl(TCG_COND_LT, t1, 0, l_less_lo);
+ tcg_gen_brcondi_tl(TCG_COND_GT, t1, 255, l_greater_lo);
+ tcg_gen_br(l_done);
+ gen_set_label(l_less_lo);
+ tcg_gen_movi_tl(t1, 0);
+ tcg_gen_br(l_done);
+ gen_set_label(l_greater_lo);
+ tcg_gen_movi_tl(t1, 255);
+
+ gen_set_label(l_done);
+ tcg_gen_shli_tl(t0, t0, 8);
+ tcg_gen_or_tl(t2, t2, t0);
+ tcg_gen_or_tl(t2, t2, t1);
+ }
+ gen_store_mxu_gpr(t2, XRa);
+ }
+}
+
/*
* MXU instruction category: align
@@ -2087,6 +2349,31 @@ static void decode_opc_mxu__pool01(DisasContext *ctx)
break;
}
}
+
+static void decode_opc_mxu__pool02(DisasContext *ctx)
+{
+ uint32_t opcode = extract32(ctx->opcode, 18, 3);
+
+ switch (opcode) {
+ case OPC_MXU_S32CPS:
+ gen_mxu_S32CPS(ctx);
+ break;
+ case OPC_MXU_D16CPS:
+ gen_mxu_D16CPS(ctx);
+ break;
+ case OPC_MXU_Q8ABD:
+ gen_mxu_Q8ABD(ctx);
+ break;
+ case OPC_MXU_Q16SAT:
+ gen_mxu_Q16SAT(ctx);
+ break;
+ default:
+ MIPS_INVAL("decode_opc_mxu");
+ gen_reserved_instruction(ctx);
+ break;
+ }
+}
+
static void decode_opc_mxu__pool04(DisasContext *ctx)
{
uint32_t reversed = extract32(ctx->opcode, 20, 1);
@@ -2336,6 +2623,9 @@ bool decode_ase_mxu(DisasContext *ctx, uint32_t insn)
case OPC_MXU__POOL01:
decode_opc_mxu__pool01(ctx);
break;
+ case OPC_MXU__POOL02:
+ decode_opc_mxu__pool02(ctx);
+ break;
case OPC_MXU__POOL04:
decode_opc_mxu__pool04(ctx);
break;
--
2.40.0
next prev parent reply other threads:[~2023-06-08 13:18 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-08 10:41 [PATCH 00/33] target/mips: Finalise the Ingenic MXU ASE support Siarhei Volkau
2023-06-08 10:41 ` [PATCH 01/33] target/mips: Add emulation of MXU instructions for 32-bit load/store Siarhei Volkau
2023-06-08 10:41 ` [PATCH 02/33] Add support of two XBurst CPUs Siarhei Volkau
2023-06-08 10:41 ` [PATCH 03/33] target/mips: Add emulation of LXW LXB LXH LXBU LXHU instructions Siarhei Volkau
2023-06-08 10:41 ` [PATCH 04/33] target/mips: Add emulation of S32MADD/MADDU/MSUB/MSUBU instructions Siarhei Volkau
2023-06-08 10:41 ` [PATCH 05/33] target/mips: Add emulation of Q8SLT Q8SLTU instructions Siarhei Volkau
2023-06-08 10:41 ` [PATCH 06/33] target/mips: fix MXU D16MAX D16MIN Q8MAX Q8MIN instructions Siarhei Volkau
2023-06-08 10:41 ` [PATCH 07/33] target/mips: Add emulation of MXU S32SLT D16SLT D16AVG[R] Q8AVG[R] insns Siarhei Volkau
2023-06-08 10:41 ` [PATCH 08/33] target/mips: Add emulation of Q8ADD instruction Siarhei Volkau
2023-06-08 10:41 ` Siarhei Volkau [this message]
2023-06-08 10:41 ` [PATCH 10/33] target/mips: Add emulation of MXU D16MULF D16MULE instructions Siarhei Volkau
2023-06-08 10:42 ` [PATCH 11/33] target/mips: Add emulation of MXU D16MACF D16MACE instructions Siarhei Volkau
2023-06-08 10:42 ` [PATCH 12/33] target/mips: Add emulation of MXU D16MADL instruction Siarhei Volkau
2023-06-08 10:42 ` [PATCH 13/33] target/mips: Add emulation of MXU S16MAD instruction Siarhei Volkau
2023-06-08 10:42 ` [PATCH 14/33] target/mips: Add emulation of MXU Q16ADD instruction Siarhei Volkau
2023-06-08 10:42 ` [PATCH 15/33] target/mips: Add emulation of MXU D32ADD instruction Siarhei Volkau
2023-06-08 10:42 ` [PATCH 16/33] target/mips: Add emulation of MXU D32ACC D32ACCM D32ASUM instructions Siarhei Volkau
2023-06-08 10:42 ` [PATCH 17/33] target/mips: Add emulation of MXU D32ADDC instruction Siarhei Volkau
2023-06-08 10:42 ` [PATCH 18/33] target/mips: Add emulation of MXU Q16ACC Q16ACCM D16ASUM instructions Siarhei Volkau
2023-06-08 10:42 ` [PATCH 19/33] target/mips: Add emulation of MXU Q8ADDE Q8ACCE D8SUM D8SUMC instructions Siarhei Volkau
2023-06-08 10:42 ` [PATCH 20/33] target/mips: Add emulation of MXU S8STD S8LDI S8SDI instructions Siarhei Volkau
2023-06-08 10:42 ` [PATCH 21/33] target/mips: Add emulation of MXU S16LDD S16STD S16LDI S16SDI instructions Siarhei Volkau
2023-06-08 10:42 ` [PATCH 22/33] target/mips: Add emulation of MXU S32MUL S32MULU S32EXTR S32EXTRV insns Siarhei Volkau
2023-06-08 10:42 ` [PATCH 23/33] target/mips: Add emulation of MXU S32ALN S32LUI insns Siarhei Volkau
2023-06-08 10:42 ` [PATCH 24/33] target/mips: Add emulation of MXU D32SARL D32SARW instructions Siarhei Volkau
2023-06-08 10:42 ` [PATCH 25/33] target/mips: Add emulation of MXU D32SLL D32SLR D32SAR instructions Siarhei Volkau
2023-06-08 10:42 ` [PATCH 26/33] target/mips: Add emulation of MXU Q16SLL Q16SLR Q16SAR instructions Siarhei Volkau
2023-06-08 10:42 ` [PATCH 27/33] target/mips: Add emulation of MXU D32/Q16- SLLV/SLRV/SARV instructions Siarhei Volkau
2023-06-08 10:42 ` [PATCH 28/33] target/mips: Add emulation of MXU S32/D16/Q8- MOVZ/MOVN instructions Siarhei Volkau
2023-06-08 10:42 ` [PATCH 29/33] target/mips: Add emulation of MXU Q8MAC Q8MACSU instructions Siarhei Volkau
2023-06-08 10:42 ` [PATCH 30/33] target/mips: Add emulation of MXU Q16SCOP instruction Siarhei Volkau
2023-06-08 10:42 ` [PATCH 31/33] target/mips: Add emulation of MXU Q8MADL instruction Siarhei Volkau
2023-06-08 10:42 ` [PATCH 32/33] target/mips: Add emulation of MXU S32SFL instruction Siarhei Volkau
2023-06-08 10:42 ` [PATCH 33/33] target/mips: Add emulation of MXU Q8SAD instruction Siarhei Volkau
2023-07-10 19:28 ` [PATCH 00/33] target/mips: Finalise the Ingenic MXU ASE support Philippe Mathieu-Daudé
2023-07-20 16:12 ` Siarhei Volkau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230608104222.1520143-10-lis8215@gmail.com \
--to=lis8215@gmail.com \
--cc=aleksandar.rikalo@syrmia.com \
--cc=amarkovic@wavecomp.com \
--cc=aurelien@aurel32.net \
--cc=jiaxun.yang@flygoat.com \
--cc=philmd@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=smarkovic@wavecomp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).