From: Siarhei Volkau <lis8215@gmail.com>
To: qemu-devel@nongnu.org
Cc: "Aleksandar Rikalo" <aleksandar.rikalo@syrmia.com>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Aurelien Jarno" <aurelien@aurel32.net>,
"Stefan Markovic" <smarkovic@wavecomp.com>,
"Aleksandar Markovic" <amarkovic@wavecomp.com>,
"Jiaxun Yang" <jiaxun.yang@flygoat.com>,
"Siarhei Volkau" <lis8215@gmail.com>
Subject: [PATCH 05/33] target/mips: Add emulation of Q8SLT Q8SLTU instructions
Date: Thu, 8 Jun 2023 13:41:54 +0300 [thread overview]
Message-ID: <20230608104222.1520143-6-lis8215@gmail.com> (raw)
In-Reply-To: <20230608104222.1520143-1-lis8215@gmail.com>
These instructions are used to set bits depending on
comparison result in each byte respectively.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
---
target/mips/tcg/mxu_translate.c | 65 +++++++++++++++++++++++++++++++++
1 file changed, 65 insertions(+)
diff --git a/target/mips/tcg/mxu_translate.c b/target/mips/tcg/mxu_translate.c
index f2c932eeb7..b7bdc07dd7 100644
--- a/target/mips/tcg/mxu_translate.c
+++ b/target/mips/tcg/mxu_translate.c
@@ -389,6 +389,8 @@ enum {
OPC_MXU_D16MIN = 0x03,
OPC_MXU_Q8MAX = 0x04,
OPC_MXU_Q8MIN = 0x05,
+ OPC_MXU_Q8SLT = 0x06,
+ OPC_MXU_Q8SLTU = 0x07,
};
/*
@@ -1399,6 +1401,63 @@ static void gen_mxu_Q8MAX_Q8MIN(DisasContext *ctx)
}
}
+/*
+ * Q8SLT
+ * Update XRa with the signed "set less than" comparison of XRb and XRc
+ * on per-byte basis.
+ * a.k.a. XRa[0..3] = XRb[0..3] < XRc[0..3] ? 1 : 0;
+ *
+ * Q8SLTU
+ * Update XRa with the unsigned "set less than" comparison of XRb and XRc
+ * on per-byte basis.
+ * a.k.a. XRa[0..3] = XRb[0..3] < XRc[0..3] ? 1 : 0;
+ */
+static void gen_mxu_q8slt(DisasContext *ctx, bool sltu)
+{
+ uint32_t pad, XRc, XRb, XRa;
+
+ pad = extract32(ctx->opcode, 21, 5);
+ XRc = extract32(ctx->opcode, 14, 4);
+ XRb = extract32(ctx->opcode, 10, 4);
+ XRa = extract32(ctx->opcode, 6, 4);
+
+ if (unlikely(pad != 0)) {
+ /* opcode padding incorrect -> do nothing */
+ } else if (unlikely(XRa == 0)) {
+ /* destination is zero register -> do nothing */
+ } else if (unlikely((XRb == 0) && (XRc == 0))) {
+ /* both operands zero registers -> just set destination to zero */
+ tcg_gen_movi_tl(mxu_gpr[XRa - 1], 0);
+ } else if (unlikely(XRb == XRc)) {
+ /* both operands same registers -> just set destination to zero */
+ tcg_gen_movi_tl(mxu_gpr[XRa - 1], 0);
+ } else {
+ /* the most general case */
+ TCGv t0 = tcg_temp_new();
+ TCGv t1 = tcg_temp_new();
+ TCGv t2 = tcg_temp_new();
+ TCGv t3 = tcg_temp_new();
+ TCGv t4 = tcg_temp_new();
+
+ gen_load_mxu_gpr(t3, XRb);
+ gen_load_mxu_gpr(t4, XRc);
+ tcg_gen_movi_tl(t2, 0);
+
+ for (int i = 0; i < 4; i++) {
+ if (sltu) {
+ tcg_gen_extract_tl(t0, t3, 8 * i, 8);
+ tcg_gen_extract_tl(t1, t4, 8 * i, 8);
+ } else {
+ tcg_gen_sextract_tl(t0, t3, 8 * i, 8);
+ tcg_gen_sextract_tl(t1, t4, 8 * i, 8);
+ }
+ tcg_gen_setcond_tl(TCG_COND_LT, t0, t0, t1);
+ tcg_gen_deposit_tl(t2, t2, t0, 8 * i, 8);
+ }
+ gen_store_mxu_gpr(t2, XRa);
+ }
+}
+
/*
* MXU instruction category: align
@@ -1664,6 +1723,12 @@ static void decode_opc_mxu__pool00(DisasContext *ctx)
case OPC_MXU_Q8MIN:
gen_mxu_Q8MAX_Q8MIN(ctx);
break;
+ case OPC_MXU_Q8SLT:
+ gen_mxu_q8slt(ctx, false);
+ break;
+ case OPC_MXU_Q8SLTU:
+ gen_mxu_q8slt(ctx, true);
+ break;
default:
MIPS_INVAL("decode_opc_mxu");
gen_reserved_instruction(ctx);
--
2.40.0
next prev parent reply other threads:[~2023-06-08 13:22 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-08 10:41 [PATCH 00/33] target/mips: Finalise the Ingenic MXU ASE support Siarhei Volkau
2023-06-08 10:41 ` [PATCH 01/33] target/mips: Add emulation of MXU instructions for 32-bit load/store Siarhei Volkau
2023-06-08 10:41 ` [PATCH 02/33] Add support of two XBurst CPUs Siarhei Volkau
2023-06-08 10:41 ` [PATCH 03/33] target/mips: Add emulation of LXW LXB LXH LXBU LXHU instructions Siarhei Volkau
2023-06-08 10:41 ` [PATCH 04/33] target/mips: Add emulation of S32MADD/MADDU/MSUB/MSUBU instructions Siarhei Volkau
2023-06-08 10:41 ` Siarhei Volkau [this message]
2023-06-08 10:41 ` [PATCH 06/33] target/mips: fix MXU D16MAX D16MIN Q8MAX Q8MIN instructions Siarhei Volkau
2023-06-08 10:41 ` [PATCH 07/33] target/mips: Add emulation of MXU S32SLT D16SLT D16AVG[R] Q8AVG[R] insns Siarhei Volkau
2023-06-08 10:41 ` [PATCH 08/33] target/mips: Add emulation of Q8ADD instruction Siarhei Volkau
2023-06-08 10:41 ` [PATCH 09/33] target/mips: Add emulation of MXU S32CPS D16CPS Q8ABD Q16SAT insns Siarhei Volkau
2023-06-08 10:41 ` [PATCH 10/33] target/mips: Add emulation of MXU D16MULF D16MULE instructions Siarhei Volkau
2023-06-08 10:42 ` [PATCH 11/33] target/mips: Add emulation of MXU D16MACF D16MACE instructions Siarhei Volkau
2023-06-08 10:42 ` [PATCH 12/33] target/mips: Add emulation of MXU D16MADL instruction Siarhei Volkau
2023-06-08 10:42 ` [PATCH 13/33] target/mips: Add emulation of MXU S16MAD instruction Siarhei Volkau
2023-06-08 10:42 ` [PATCH 14/33] target/mips: Add emulation of MXU Q16ADD instruction Siarhei Volkau
2023-06-08 10:42 ` [PATCH 15/33] target/mips: Add emulation of MXU D32ADD instruction Siarhei Volkau
2023-06-08 10:42 ` [PATCH 16/33] target/mips: Add emulation of MXU D32ACC D32ACCM D32ASUM instructions Siarhei Volkau
2023-06-08 10:42 ` [PATCH 17/33] target/mips: Add emulation of MXU D32ADDC instruction Siarhei Volkau
2023-06-08 10:42 ` [PATCH 18/33] target/mips: Add emulation of MXU Q16ACC Q16ACCM D16ASUM instructions Siarhei Volkau
2023-06-08 10:42 ` [PATCH 19/33] target/mips: Add emulation of MXU Q8ADDE Q8ACCE D8SUM D8SUMC instructions Siarhei Volkau
2023-06-08 10:42 ` [PATCH 20/33] target/mips: Add emulation of MXU S8STD S8LDI S8SDI instructions Siarhei Volkau
2023-06-08 10:42 ` [PATCH 21/33] target/mips: Add emulation of MXU S16LDD S16STD S16LDI S16SDI instructions Siarhei Volkau
2023-06-08 10:42 ` [PATCH 22/33] target/mips: Add emulation of MXU S32MUL S32MULU S32EXTR S32EXTRV insns Siarhei Volkau
2023-06-08 10:42 ` [PATCH 23/33] target/mips: Add emulation of MXU S32ALN S32LUI insns Siarhei Volkau
2023-06-08 10:42 ` [PATCH 24/33] target/mips: Add emulation of MXU D32SARL D32SARW instructions Siarhei Volkau
2023-06-08 10:42 ` [PATCH 25/33] target/mips: Add emulation of MXU D32SLL D32SLR D32SAR instructions Siarhei Volkau
2023-06-08 10:42 ` [PATCH 26/33] target/mips: Add emulation of MXU Q16SLL Q16SLR Q16SAR instructions Siarhei Volkau
2023-06-08 10:42 ` [PATCH 27/33] target/mips: Add emulation of MXU D32/Q16- SLLV/SLRV/SARV instructions Siarhei Volkau
2023-06-08 10:42 ` [PATCH 28/33] target/mips: Add emulation of MXU S32/D16/Q8- MOVZ/MOVN instructions Siarhei Volkau
2023-06-08 10:42 ` [PATCH 29/33] target/mips: Add emulation of MXU Q8MAC Q8MACSU instructions Siarhei Volkau
2023-06-08 10:42 ` [PATCH 30/33] target/mips: Add emulation of MXU Q16SCOP instruction Siarhei Volkau
2023-06-08 10:42 ` [PATCH 31/33] target/mips: Add emulation of MXU Q8MADL instruction Siarhei Volkau
2023-06-08 10:42 ` [PATCH 32/33] target/mips: Add emulation of MXU S32SFL instruction Siarhei Volkau
2023-06-08 10:42 ` [PATCH 33/33] target/mips: Add emulation of MXU Q8SAD instruction Siarhei Volkau
2023-07-10 19:28 ` [PATCH 00/33] target/mips: Finalise the Ingenic MXU ASE support Philippe Mathieu-Daudé
2023-07-20 16:12 ` Siarhei Volkau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230608104222.1520143-6-lis8215@gmail.com \
--to=lis8215@gmail.com \
--cc=aleksandar.rikalo@syrmia.com \
--cc=amarkovic@wavecomp.com \
--cc=aurelien@aurel32.net \
--cc=jiaxun.yang@flygoat.com \
--cc=philmd@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=smarkovic@wavecomp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).