From: Alistair Francis <alistair23@gmail.com>
To: qemu-devel@nongnu.org
Cc: alistair23@gmail.com, Weiwei Li <liweiwei@iscas.ac.cn>,
Junqiang Wang <wangjunqiang@iscas.ac.cn>,
Alistair Francis <alistair.francis@wdc.com>
Subject: [PULL 08/60] target/riscv: Update check for Zca/Zcf/Zcd
Date: Wed, 14 Jun 2023 11:19:25 +1000 [thread overview]
Message-ID: <20230614012017.3100663-9-alistair.francis@wdc.com> (raw)
In-Reply-To: <20230614012017.3100663-1-alistair.francis@wdc.com>
From: Weiwei Li <liweiwei@iscas.ac.cn>
Even though Zca/Zcf/Zcd can be included by C/F/D, however, their priv
version is higher than the priv version of C/F/D. So if we use check
for them instead of check for C/F/D totally, it will trigger new
problem when we try to disable the extensions based on the configured
priv version.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230517135714.211809-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
---
target/riscv/translate.c | 5 +++--
target/riscv/insn_trans/trans_rvd.c.inc | 12 +++++++-----
target/riscv/insn_trans/trans_rvf.c.inc | 14 ++++++++------
target/riscv/insn_trans/trans_rvi.c.inc | 5 +++--
4 files changed, 21 insertions(+), 15 deletions(-)
diff --git a/target/riscv/translate.c b/target/riscv/translate.c
index 933b11c50d..29f1fb3995 100644
--- a/target/riscv/translate.c
+++ b/target/riscv/translate.c
@@ -551,7 +551,7 @@ static void gen_jal(DisasContext *ctx, int rd, target_ulong imm)
/* check misaligned: */
next_pc = ctx->base.pc_next + imm;
- if (!ctx->cfg_ptr->ext_zca) {
+ if (!has_ext(ctx, RVC) && !ctx->cfg_ptr->ext_zca) {
if ((next_pc & 0x3) != 0) {
gen_exception_inst_addr_mis(ctx);
return;
@@ -1125,7 +1125,8 @@ static void decode_opc(CPURISCVState *env, DisasContext *ctx, uint16_t opcode)
* The Zca extension is added as way to refer to instructions in the C
* extension that do not include the floating-point loads and stores
*/
- if (ctx->cfg_ptr->ext_zca && decode_insn16(ctx, opcode)) {
+ if ((has_ext(ctx, RVC) || ctx->cfg_ptr->ext_zca) &&
+ decode_insn16(ctx, opcode)) {
return;
}
} else {
diff --git a/target/riscv/insn_trans/trans_rvd.c.inc b/target/riscv/insn_trans/trans_rvd.c.inc
index 2c51e01c40..6bdb55ef43 100644
--- a/target/riscv/insn_trans/trans_rvd.c.inc
+++ b/target/riscv/insn_trans/trans_rvd.c.inc
@@ -31,9 +31,11 @@
} \
} while (0)
-#define REQUIRE_ZCD(ctx) do { \
- if (!ctx->cfg_ptr->ext_zcd) { \
- return false; \
+#define REQUIRE_ZCD_OR_DC(ctx) do { \
+ if (!ctx->cfg_ptr->ext_zcd) { \
+ if (!has_ext(ctx, RVD) || !has_ext(ctx, RVC)) { \
+ return false; \
+ } \
} \
} while (0)
@@ -67,13 +69,13 @@ static bool trans_fsd(DisasContext *ctx, arg_fsd *a)
static bool trans_c_fld(DisasContext *ctx, arg_fld *a)
{
- REQUIRE_ZCD(ctx);
+ REQUIRE_ZCD_OR_DC(ctx);
return trans_fld(ctx, a);
}
static bool trans_c_fsd(DisasContext *ctx, arg_fsd *a)
{
- REQUIRE_ZCD(ctx);
+ REQUIRE_ZCD_OR_DC(ctx);
return trans_fsd(ctx, a);
}
diff --git a/target/riscv/insn_trans/trans_rvf.c.inc b/target/riscv/insn_trans/trans_rvf.c.inc
index b2de4fcf3f..c47138575a 100644
--- a/target/riscv/insn_trans/trans_rvf.c.inc
+++ b/target/riscv/insn_trans/trans_rvf.c.inc
@@ -30,10 +30,12 @@
} \
} while (0)
-#define REQUIRE_ZCF(ctx) do { \
- if (!ctx->cfg_ptr->ext_zcf) { \
- return false; \
- } \
+#define REQUIRE_ZCF_OR_FC(ctx) do { \
+ if (!ctx->cfg_ptr->ext_zcf) { \
+ if (!has_ext(ctx, RVF) || !has_ext(ctx, RVC)) { \
+ return false; \
+ } \
+ } \
} while (0)
static bool trans_flw(DisasContext *ctx, arg_flw *a)
@@ -69,13 +71,13 @@ static bool trans_fsw(DisasContext *ctx, arg_fsw *a)
static bool trans_c_flw(DisasContext *ctx, arg_flw *a)
{
- REQUIRE_ZCF(ctx);
+ REQUIRE_ZCF_OR_FC(ctx);
return trans_flw(ctx, a);
}
static bool trans_c_fsw(DisasContext *ctx, arg_fsw *a)
{
- REQUIRE_ZCF(ctx);
+ REQUIRE_ZCF_OR_FC(ctx);
return trans_fsw(ctx, a);
}
diff --git a/target/riscv/insn_trans/trans_rvi.c.inc b/target/riscv/insn_trans/trans_rvi.c.inc
index 2031e9931e..d794247f40 100644
--- a/target/riscv/insn_trans/trans_rvi.c.inc
+++ b/target/riscv/insn_trans/trans_rvi.c.inc
@@ -56,7 +56,7 @@ static bool trans_jalr(DisasContext *ctx, arg_jalr *a)
tcg_gen_andi_tl(cpu_pc, cpu_pc, (target_ulong)-2);
gen_set_pc(ctx, cpu_pc);
- if (!ctx->cfg_ptr->ext_zca) {
+ if (!has_ext(ctx, RVC) && !ctx->cfg_ptr->ext_zca) {
TCGv t0 = tcg_temp_new();
misaligned = gen_new_label();
@@ -169,7 +169,8 @@ static bool gen_branch(DisasContext *ctx, arg_b *a, TCGCond cond)
gen_set_label(l); /* branch taken */
- if (!ctx->cfg_ptr->ext_zca && ((ctx->base.pc_next + a->imm) & 0x3)) {
+ if (!has_ext(ctx, RVC) && !ctx->cfg_ptr->ext_zca &&
+ ((ctx->base.pc_next + a->imm) & 0x3)) {
/* misaligned */
gen_exception_inst_addr_mis(ctx);
} else {
--
2.40.1
next prev parent reply other threads:[~2023-06-14 1:21 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-14 1:19 [PULL 00/60] riscv-to-apply queue Alistair Francis
2023-06-14 1:19 ` [PULL 01/60] target/riscv/vector_helper.c: skip set tail when vta is zero Alistair Francis
2023-06-14 1:19 ` [PULL 02/60] target/riscv: Move zc* out of the experimental properties Alistair Francis
2023-06-14 1:19 ` [PULL 03/60] target/riscv/cpu.c: add riscv_cpu_validate_v() Alistair Francis
2023-06-14 1:19 ` [PULL 04/60] target/riscv/cpu.c: remove set_vext_version() Alistair Francis
2023-06-14 1:19 ` [PULL 05/60] target/riscv/cpu.c: remove set_priv_version() Alistair Francis
2023-06-14 1:19 ` [PULL 06/60] target/riscv: add PRIV_VERSION_LATEST Alistair Francis
2023-06-14 1:19 ` [PULL 07/60] target/riscv: Mask the implicitly enabled extensions in isa_string based on priv version Alistair Francis
2023-06-14 1:19 ` Alistair Francis [this message]
2023-06-14 1:19 ` [PULL 09/60] target/riscv/cpu.c: add priv_spec validate/disable_exts helpers Alistair Francis
2023-06-14 1:19 ` [PULL 10/60] target/riscv/cpu.c: add riscv_cpu_validate_misa_mxl() Alistair Francis
2023-06-14 1:19 ` [PULL 11/60] target/riscv/cpu.c: validate extensions before riscv_timer_init() Alistair Francis
2023-06-14 1:19 ` [PULL 12/60] target/riscv/cpu.c: remove cfg setup from riscv_cpu_init() Alistair Francis
2023-06-14 1:19 ` [PULL 13/60] target/riscv: rework write_misa() Alistair Francis
2023-06-14 1:19 ` [PULL 14/60] target/riscv: Update pmp_get_tlb_size() Alistair Francis
2023-06-14 1:19 ` [PULL 15/60] target/riscv: Move pmp_get_tlb_size apart from get_physical_address_pmp Alistair Francis
2023-06-14 1:19 ` [PULL 16/60] target/riscv: Make the short cut really work in pmp_hart_has_privs Alistair Francis
2023-06-14 1:19 ` [PULL 17/60] target/riscv: Change the return type of pmp_hart_has_privs() to bool Alistair Francis
2023-06-14 1:19 ` [PULL 18/60] target/riscv: Make RLB/MML/MMWP bits writable only when Smepmp is enabled Alistair Francis
2023-06-14 1:19 ` [PULL 19/60] target/riscv: Remove unused paramters in pmp_hart_has_privs_default() Alistair Francis
2023-06-14 1:19 ` [PULL 20/60] target/riscv: Flush TLB when MMWP or MML bits are changed Alistair Francis
2023-06-14 1:19 ` [PULL 21/60] target/riscv: Update the next rule addr in pmpaddr_csr_write() Alistair Francis
2023-06-14 1:19 ` [PULL 22/60] target/riscv: Flush TLB when pmpaddr is updated Alistair Francis
2023-06-14 1:19 ` [PULL 23/60] target/riscv: Flush TLB only when pmpcfg/pmpaddr really changes Alistair Francis
2023-06-14 1:19 ` [PULL 24/60] target/riscv: Separate pmp_update_rule() in pmpcfg_csr_write Alistair Francis
2023-06-14 1:19 ` [PULL 25/60] target/riscv: Deny access if access is partially inside the PMP entry Alistair Francis
2023-06-14 1:19 ` [PULL 26/60] hw/riscv/opentitan: Rename machine_[class]_init() functions Alistair Francis
2023-06-14 1:19 ` [PULL 27/60] hw/riscv/opentitan: Declare QOM types using DEFINE_TYPES() macro Alistair Francis
2023-06-14 1:19 ` [PULL 28/60] hw/riscv/opentitan: Add TYPE_OPENTITAN_MACHINE definition Alistair Francis
2023-06-14 1:19 ` [PULL 29/60] hw/riscv/opentitan: Explicit machine type definition Alistair Francis
2023-06-14 1:19 ` [PULL 30/60] hw/riscv/opentitan: Correct OpenTitanState parent type/size Alistair Francis
2023-06-14 1:19 ` [PULL 31/60] hw/riscv: qemu crash when NUMA nodes exceed available CPUs Alistair Francis
2023-06-14 1:19 ` [PULL 32/60] target/riscv: Fix pointer mask transformation for vector address Alistair Francis
2023-06-14 1:19 ` [PULL 33/60] target/riscv: Update cur_pmmask/base when xl changes Alistair Francis
2023-06-14 1:19 ` [PULL 34/60] target/riscv: smstateen check for fcsr Alistair Francis
2023-06-14 1:19 ` [PULL 35/60] target/riscv: Reuse tb->flags.FS Alistair Francis
2023-06-14 1:19 ` [PULL 36/60] target/riscv: smstateen knobs Alistair Francis
2023-06-14 1:19 ` [PULL 37/60] disas: Change type of disassemble_info.target_info to pointer Alistair Francis
2023-06-14 1:19 ` [PULL 38/60] target/riscv: Split RISCVCPUConfig declarations from cpu.h into cpu_cfg.h Alistair Francis
2023-06-14 1:19 ` [PULL 39/60] target/riscv: Pass RISCVCPUConfig as target_info to disassemble_info Alistair Francis
2023-06-14 1:19 ` [PULL 40/60] disas/riscv.c: Support disas for Zcm* extensions Alistair Francis
2023-06-14 1:19 ` [PULL 41/60] disas/riscv.c: Support disas for Z*inx extensions Alistair Francis
2023-06-14 1:19 ` [PULL 42/60] disas/riscv.c: Remove unused decomp_rv32/64 value for vector instructions Alistair Francis
2023-06-14 1:20 ` [PULL 43/60] disas/riscv.c: Fix lines with over 80 characters Alistair Francis
2023-06-14 1:20 ` [PULL 44/60] disas/riscv.c: Remove redundant parentheses Alistair Francis
2023-06-14 1:20 ` [PULL 45/60] target/riscv: Fix target address to update badaddr Alistair Francis
2023-06-14 1:20 ` [PULL 46/60] target/riscv: Introduce cur_insn_len into DisasContext Alistair Francis
2023-06-14 1:20 ` [PULL 47/60] target/riscv: Change gen_goto_tb to work on displacements Alistair Francis
2023-06-14 1:20 ` [PULL 48/60] target/riscv: Change gen_set_pc_imm to gen_update_pc Alistair Francis
2023-06-14 1:20 ` [PULL 49/60] target/riscv: Use true diff for gen_pc_plus_diff Alistair Francis
2023-06-14 1:20 ` [PULL 50/60] target/riscv: Enable PC-relative translation Alistair Francis
2023-06-14 1:20 ` [PULL 51/60] target/riscv: Remove pc_succ_insn from DisasContext Alistair Francis
2023-06-14 1:20 ` [PULL 52/60] hw/riscv: virt: Assume M-mode FW in pflash0 only when "-bios none" Alistair Francis
2023-06-14 1:20 ` [PULL 53/60] riscv/virt: Support using pflash via -blockdev option Alistair Francis
2023-06-14 1:20 ` [PULL 54/60] docs/system: riscv: Add pflash usage details Alistair Francis
2023-06-14 1:20 ` [PULL 55/60] util/log: Add vector registers to log Alistair Francis
2023-06-14 1:20 ` [PULL 56/60] target/riscv: Fix initialized value for cur_pmmask Alistair Francis
2023-06-14 1:20 ` [PULL 57/60] target/riscv/vector_helper.c: clean up reference of MTYPE Alistair Francis
2023-06-14 1:20 ` [PULL 58/60] target/riscv/vector_helper.c: Remove the check for extra tail elements Alistair Francis
2023-06-14 1:20 ` [PULL 59/60] target/riscv: Smepmp: Return error when access permission not allowed in PMP Alistair Francis
2023-06-14 1:20 ` [PULL 60/60] hw/intc: If mmsiaddrcfgh.L == 1, smsiaddrcfg and smsiaddrcfgh are read-only Alistair Francis
2023-06-14 4:39 ` [PULL 00/60] riscv-to-apply queue Richard Henderson
2023-06-14 12:17 ` Michael Tokarev
2023-06-15 4:03 ` Alistair Francis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230614012017.3100663-9-alistair.francis@wdc.com \
--to=alistair23@gmail.com \
--cc=alistair.francis@wdc.com \
--cc=liweiwei@iscas.ac.cn \
--cc=qemu-devel@nongnu.org \
--cc=wangjunqiang@iscas.ac.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).