qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Francisco Iglesias <frasse.iglesias@gmail.com>
To: Kinsey Moore <kinsey.moore@oarcorp.com>
Cc: qemu-devel@nongnu.org
Subject: Re: [PATCH v2] hw/arm/xlnx: Connect secondary CGEM IRQs
Date: Fri, 16 Jun 2023 22:25:13 +0200	[thread overview]
Message-ID: <20230616202511.GI6984@fralle-msi> (raw)
In-Reply-To: <20230616143803.73926-1-kinsey.moore@oarcorp.com>

On [2023 Jun 16] Fri 09:38:03, Kinsey Moore wrote:
> The Cadence GEM peripherals as configured for Zynq MPSoC and Versal
> platforms have two priority queues with separate interrupt sources for
> each. If the interrupt source for the second priority queue is not
> connected, they work in polling mode only. This change connects the
> second interrupt source for platforms where it is available. This patch
> has been tested using the lwIP stack with a Xilinx-supplied driver from
> their embeddedsw repository.
> 
> Signed-off-by: Kinsey Moore <kinsey.moore@oarcorp.com>

Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>

> ---
>  hw/arm/xlnx-versal.c         | 12 +++++++++++-
>  hw/arm/xlnx-zynqmp.c         | 11 ++++++++++-
>  include/hw/arm/xlnx-versal.h |  1 +
>  include/hw/arm/xlnx-zynqmp.h |  1 +
>  4 files changed, 23 insertions(+), 2 deletions(-)
> 
> diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c
> index 60bf5fe657..cb79b855fd 100644
> --- a/hw/arm/xlnx-versal.c
> +++ b/hw/arm/xlnx-versal.c
> @@ -252,9 +252,13 @@ static void versal_create_gems(Versal *s, qemu_irq *pic)
>          NICInfo *nd = &nd_table[i];
>          DeviceState *dev;
>          MemoryRegion *mr;
> +        OrIRQState *or_irq;
>  
>          object_initialize_child(OBJECT(s), name, &s->lpd.iou.gem[i],
>                                  TYPE_CADENCE_GEM);
> +        or_irq = &s->lpd.iou.gem_irq_orgate[i];
> +        object_initialize_child(OBJECT(s), "gem-irq-orgate[*]",
> +                                or_irq, TYPE_OR_IRQ);
>          dev = DEVICE(&s->lpd.iou.gem[i]);
>          /* FIXME use qdev NIC properties instead of nd_table[] */
>          if (nd->used) {
> @@ -264,6 +268,11 @@ static void versal_create_gems(Versal *s, qemu_irq *pic)
>          object_property_set_int(OBJECT(dev), "phy-addr", 23, &error_abort);
>          object_property_set_int(OBJECT(dev), "num-priority-queues", 2,
>                                  &error_abort);
> +        object_property_set_int(OBJECT(or_irq),
> +                                "num-lines", 2, &error_fatal);
> +        qdev_realize(DEVICE(or_irq), NULL, &error_fatal);
> +        qdev_connect_gpio_out(DEVICE(or_irq), 0, pic[irqs[i]]);
> +
>          object_property_set_link(OBJECT(dev), "dma", OBJECT(&s->mr_ps),
>                                   &error_abort);
>          sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal);
> @@ -271,7 +280,8 @@ static void versal_create_gems(Versal *s, qemu_irq *pic)
>          mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0);
>          memory_region_add_subregion(&s->mr_ps, addrs[i], mr);
>  
> -        sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[irqs[i]]);
> +        sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, qdev_get_gpio_in(DEVICE(or_irq), 0));
> +        sysbus_connect_irq(SYS_BUS_DEVICE(dev), 1, qdev_get_gpio_in(DEVICE(or_irq), 1));
>          g_free(name);
>      }
>  }
> diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c
> index 5905a33015..f7158e4fd3 100644
> --- a/hw/arm/xlnx-zynqmp.c
> +++ b/hw/arm/xlnx-zynqmp.c
> @@ -392,6 +392,8 @@ static void xlnx_zynqmp_init(Object *obj)
>  
>      for (i = 0; i < XLNX_ZYNQMP_NUM_GEMS; i++) {
>          object_initialize_child(obj, "gem[*]", &s->gem[i], TYPE_CADENCE_GEM);
> +        object_initialize_child(obj, "gem-irq-orgate[*]",
> +                                &s->gem_irq_orgate[i], TYPE_OR_IRQ);
>      }
>  
>      for (i = 0; i < XLNX_ZYNQMP_NUM_UARTS; i++) {
> @@ -629,12 +631,19 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
>                                  &error_abort);
>          object_property_set_int(OBJECT(&s->gem[i]), "num-priority-queues", 2,
>                                  &error_abort);
> +        object_property_set_int(OBJECT(&s->gem_irq_orgate[i]),
> +                                "num-lines", 2, &error_fatal);
> +        qdev_realize(DEVICE(&s->gem_irq_orgate[i]), NULL, &error_fatal);
> +        qdev_connect_gpio_out(DEVICE(&s->gem_irq_orgate[i]), 0, gic_spi[gem_intr[i]]);
> +
>          if (!sysbus_realize(SYS_BUS_DEVICE(&s->gem[i]), errp)) {
>              return;
>          }
>          sysbus_mmio_map(SYS_BUS_DEVICE(&s->gem[i]), 0, gem_addr[i]);
>          sysbus_connect_irq(SYS_BUS_DEVICE(&s->gem[i]), 0,
> -                           gic_spi[gem_intr[i]]);
> +                           qdev_get_gpio_in(DEVICE(&s->gem_irq_orgate[i]), 0));
> +        sysbus_connect_irq(SYS_BUS_DEVICE(&s->gem[i]), 1,
> +                           qdev_get_gpio_in(DEVICE(&s->gem_irq_orgate[i]), 1));
>      }
>  
>      for (i = 0; i < XLNX_ZYNQMP_NUM_UARTS; i++) {
> diff --git a/include/hw/arm/xlnx-versal.h b/include/hw/arm/xlnx-versal.h
> index 39ee31185c..d34c763329 100644
> --- a/include/hw/arm/xlnx-versal.h
> +++ b/include/hw/arm/xlnx-versal.h
> @@ -74,6 +74,7 @@ struct Versal {
>          struct {
>              PL011State uart[XLNX_VERSAL_NR_UARTS];
>              CadenceGEMState gem[XLNX_VERSAL_NR_GEMS];
> +            OrIRQState gem_irq_orgate[XLNX_VERSAL_NR_GEMS];
>              XlnxZDMA adma[XLNX_VERSAL_NR_ADMAS];
>              VersalUsb2 usb;
>              CanBusState *canbus[XLNX_VERSAL_NR_CANFD];
> diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h
> index 687c75e3b0..7e5abce467 100644
> --- a/include/hw/arm/xlnx-zynqmp.h
> +++ b/include/hw/arm/xlnx-zynqmp.h
> @@ -117,6 +117,7 @@ struct XlnxZynqMPState {
>      MemoryRegion mr_unimp[XLNX_ZYNQMP_NUM_UNIMP_AREAS];
>  
>      CadenceGEMState gem[XLNX_ZYNQMP_NUM_GEMS];
> +    OrIRQState gem_irq_orgate[XLNX_ZYNQMP_NUM_GEMS];
>      CadenceUARTState uart[XLNX_ZYNQMP_NUM_UARTS];
>      XlnxZynqMPCANState can[XLNX_ZYNQMP_NUM_CAN];
>      SysbusAHCIState sata;
> -- 
> 2.30.2
> 
> 


  reply	other threads:[~2023-06-16 20:26 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-16 14:38 [PATCH v2] hw/arm/xlnx: Connect secondary CGEM IRQs Kinsey Moore
2023-06-16 20:25 ` Francisco Iglesias [this message]
2023-06-17 22:50 ` Philippe Mathieu-Daudé
2023-07-10 14:09   ` Francisco Iglesias
2024-09-25 19:34     ` Kinsey Moore
2024-09-27 16:48       ` Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230616202511.GI6984@fralle-msi \
    --to=frasse.iglesias@gmail.com \
    --cc=kinsey.moore@oarcorp.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).