From: Nicholas Piggin <npiggin@gmail.com>
To: qemu-ppc@nongnu.org
Cc: "Nicholas Piggin" <npiggin@gmail.com>,
qemu-devel@nongnu.org,
"Harsh Prateek Bora" <harshpb@linux.ibm.com>,
"Daniel Henrique Barboza" <danielhb413@gmail.com>,
"Cédric Le Goater" <clg@kaod.org>,
"David Gibson" <david@gibson.dropbear.id.au>,
"Greg Kurz" <groug@kaod.org>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>
Subject: [PATCH v2 3/7] target/ppc: Add msgsnd/p and DPDES SMT support
Date: Thu, 22 Jun 2023 19:33:53 +1000 [thread overview]
Message-ID: <20230622093357.255649-4-npiggin@gmail.com> (raw)
In-Reply-To: <20230622093357.255649-1-npiggin@gmail.com>
Doorbells in SMT need to coordinate msgsnd/msgclr and DPDES access from
multiple threads that affect the same state.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
hw/ppc/ppc.c | 6 ++++++
include/hw/ppc/ppc.h | 1 +
target/ppc/excp_helper.c | 30 ++++++++++++++++++++++-----
target/ppc/misc_helper.c | 44 ++++++++++++++++++++++++++++++++++------
target/ppc/translate.c | 8 ++++++++
5 files changed, 78 insertions(+), 11 deletions(-)
diff --git a/hw/ppc/ppc.c b/hw/ppc/ppc.c
index 1b1220c423..82e4408c5c 100644
--- a/hw/ppc/ppc.c
+++ b/hw/ppc/ppc.c
@@ -1436,6 +1436,12 @@ int ppc_cpu_pir(PowerPCCPU *cpu)
return env->spr_cb[SPR_PIR].default_value;
}
+int ppc_cpu_tir(PowerPCCPU *cpu)
+{
+ CPUPPCState *env = &cpu->env;
+ return env->spr_cb[SPR_TIR].default_value;
+}
+
PowerPCCPU *ppc_get_vcpu_by_pir(int pir)
{
CPUState *cs;
diff --git a/include/hw/ppc/ppc.h b/include/hw/ppc/ppc.h
index 02af03ada2..e095c002dc 100644
--- a/include/hw/ppc/ppc.h
+++ b/include/hw/ppc/ppc.h
@@ -6,6 +6,7 @@
void ppc_set_irq(PowerPCCPU *cpu, int n_IRQ, int level);
PowerPCCPU *ppc_get_vcpu_by_pir(int pir);
int ppc_cpu_pir(PowerPCCPU *cpu);
+int ppc_cpu_tir(PowerPCCPU *cpu);
/* PowerPC hardware exceptions management helpers */
typedef void (*clk_setup_cb)(void *opaque, uint32_t freq);
diff --git a/target/ppc/excp_helper.c b/target/ppc/excp_helper.c
index 7d45035447..d40eecb4c7 100644
--- a/target/ppc/excp_helper.c
+++ b/target/ppc/excp_helper.c
@@ -3187,22 +3187,42 @@ void helper_book3s_msgclrp(CPUPPCState *env, target_ulong rb)
}
/*
- * sends a message to other threads that are on the same
+ * sends a message to another thread on the same
* multi-threaded processor
*/
void helper_book3s_msgsndp(CPUPPCState *env, target_ulong rb)
{
- int pir = env->spr_cb[SPR_PIR].default_value;
+ CPUState *cs = env_cpu(env);
+ PowerPCCPU *cpu = POWERPC_CPU(cs);
+ CPUState *ccs;
+ uint32_t nr_threads = cs->nr_threads;
+ int ttir = rb & PPC_BITMASK(57, 63);
helper_hfscr_facility_check(env, HFSCR_MSGP, "msgsndp", HFSCR_IC_MSGP);
- if (!dbell_type_server(rb)) {
+ if (!dbell_type_server(rb) || ttir >= nr_threads) {
+ return;
+ }
+
+ if (nr_threads == 1) {
+ ppc_set_irq(cpu, PPC_INTERRUPT_DOORBELL, 1);
return;
}
- /* TODO: TCG supports only one thread */
+ /* Does iothread need to be locked for walking CPU list? */
+ qemu_mutex_lock_iothread();
+ THREAD_SIBLING_FOREACH(cs, ccs) {
+ PowerPCCPU *ccpu = POWERPC_CPU(ccs);
+ uint32_t thread_id = ppc_cpu_tir(ccpu);
+
+ if (ttir == thread_id) {
+ ppc_set_irq(ccpu, PPC_INTERRUPT_DOORBELL, 1);
+ qemu_mutex_unlock_iothread();
+ return;
+ }
+ }
- book3s_msgsnd_common(pir, PPC_INTERRUPT_DOORBELL);
+ g_assert_not_reached();
}
#endif /* TARGET_PPC64 */
diff --git a/target/ppc/misc_helper.c b/target/ppc/misc_helper.c
index a058eb24cd..1f1af21f33 100644
--- a/target/ppc/misc_helper.c
+++ b/target/ppc/misc_helper.c
@@ -184,14 +184,31 @@ void helper_store_pcr(CPUPPCState *env, target_ulong value)
*/
target_ulong helper_load_dpdes(CPUPPCState *env)
{
+ CPUState *cs = env_cpu(env);
+ CPUState *ccs;
+ uint32_t nr_threads = cs->nr_threads;
target_ulong dpdes = 0;
helper_hfscr_facility_check(env, HFSCR_MSGP, "load DPDES", HFSCR_IC_MSGP);
- /* TODO: TCG supports only one thread */
- if (env->pending_interrupts & PPC_INTERRUPT_DOORBELL) {
- dpdes = 1;
+ if (nr_threads == 1) {
+ if (env->pending_interrupts & PPC_INTERRUPT_DOORBELL) {
+ dpdes = 1;
+ }
+ return dpdes;
+ }
+
+ qemu_mutex_lock_iothread();
+ THREAD_SIBLING_FOREACH(cs, ccs) {
+ PowerPCCPU *ccpu = POWERPC_CPU(ccs);
+ CPUPPCState *cenv = &ccpu->env;
+ uint32_t thread_id = ppc_cpu_tir(ccpu);
+
+ if (cenv->pending_interrupts & PPC_INTERRUPT_DOORBELL) {
+ dpdes |= (0x1 << thread_id);
+ }
}
+ qemu_mutex_unlock_iothread();
return dpdes;
}
@@ -199,17 +216,32 @@ target_ulong helper_load_dpdes(CPUPPCState *env)
void helper_store_dpdes(CPUPPCState *env, target_ulong val)
{
PowerPCCPU *cpu = env_archcpu(env);
+ CPUState *cs = env_cpu(env);
+ CPUState *ccs;
+ uint32_t nr_threads = cs->nr_threads;
helper_hfscr_facility_check(env, HFSCR_MSGP, "store DPDES", HFSCR_IC_MSGP);
- /* TODO: TCG supports only one thread */
- if (val & ~0x1) {
+ if (val & ~(nr_threads - 1)) {
qemu_log_mask(LOG_GUEST_ERROR, "Invalid DPDES register value "
TARGET_FMT_lx"\n", val);
+ val &= (nr_threads - 1); /* Ignore the invalid bits */
+ }
+
+ if (nr_threads == 1) {
+ ppc_set_irq(cpu, PPC_INTERRUPT_DOORBELL, val & 0x1);
return;
}
- ppc_set_irq(cpu, PPC_INTERRUPT_DOORBELL, val & 0x1);
+ /* Does iothread need to be locked for walking CPU list? */
+ qemu_mutex_lock_iothread();
+ THREAD_SIBLING_FOREACH(cs, ccs) {
+ PowerPCCPU *ccpu = POWERPC_CPU(ccs);
+ uint32_t thread_id = ppc_cpu_tir(ccpu);
+
+ ppc_set_irq(cpu, PPC_INTERRUPT_DOORBELL, val & (0x1 << thread_id));
+ }
+ qemu_mutex_unlock_iothread();
}
#endif /* defined(TARGET_PPC64) */
diff --git a/target/ppc/translate.c b/target/ppc/translate.c
index 41a8b800bd..eb278c2683 100644
--- a/target/ppc/translate.c
+++ b/target/ppc/translate.c
@@ -815,11 +815,19 @@ void spr_write_pcr(DisasContext *ctx, int sprn, int gprn)
/* DPDES */
void spr_read_dpdes(DisasContext *ctx, int gprn, int sprn)
{
+ if (!gen_serialize_core(ctx)) {
+ return;
+ }
+
gen_helper_load_dpdes(cpu_gpr[gprn], cpu_env);
}
void spr_write_dpdes(DisasContext *ctx, int sprn, int gprn)
{
+ if (!gen_serialize_core(ctx)) {
+ return;
+ }
+
gen_helper_store_dpdes(cpu_env, cpu_gpr[gprn]);
}
#endif
--
2.40.1
next prev parent reply other threads:[~2023-06-22 9:34 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-22 9:33 [PATCH v2 0/7] target/ppc: TCG SMT support for spapr machine Nicholas Piggin
2023-06-22 9:33 ` [PATCH v2 1/7] target/ppc: Add initial flags and helpers for SMT support Nicholas Piggin
2023-06-22 17:33 ` Cédric Le Goater
2023-06-22 9:33 ` [PATCH v2 2/7] target/ppc: Add support for SMT CTRL register Nicholas Piggin
2023-06-22 17:32 ` Cédric Le Goater
2023-06-22 9:33 ` Nicholas Piggin [this message]
2023-06-22 17:33 ` [PATCH v2 3/7] target/ppc: Add msgsnd/p and DPDES SMT support Cédric Le Goater
2023-06-22 9:33 ` [PATCH v2 4/7] hw/ppc/spapr: Test whether TCG is enabled with tcg_enabled() Nicholas Piggin
2023-06-22 9:33 ` [PATCH v2 5/7] spapr: TCG allow up to 8-thread SMT on POWER8 and newer CPUs Nicholas Piggin
2023-06-22 10:06 ` Cédric Le Goater
2023-06-22 10:49 ` Cédric Le Goater
2023-06-23 6:32 ` Cédric Le Goater
2023-06-22 9:33 ` [PATCH v2 6/7] tests/avocado: boot ppc64 pseries to Linux VFS mount Nicholas Piggin
2023-06-22 17:33 ` Cédric Le Goater
2023-06-22 9:33 ` [PATCH v2 7/7] tests/avocado: Add ppc64 pseries multiprocessor boot tests Nicholas Piggin
2023-06-22 17:33 ` Cédric Le Goater
2023-06-23 9:33 ` [PATCH v2 0/7] target/ppc: TCG SMT support for spapr machine Cédric Le Goater
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230622093357.255649-4-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=clg@kaod.org \
--cc=danielhb413@gmail.com \
--cc=david@gibson.dropbear.id.au \
--cc=groug@kaod.org \
--cc=harshpb@linux.ibm.com \
--cc=philmd@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).