From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: "Philippe Mathieu-Daudé" <philmd@linaro.org>
Subject: [PULL 21/22] accel/tcg: Move TLB_WATCHPOINT to TLB_SLOW_FLAGS_MASK
Date: Mon, 26 Jun 2023 17:39:44 +0200 [thread overview]
Message-ID: <20230626153945.76180-22-richard.henderson@linaro.org> (raw)
In-Reply-To: <20230626153945.76180-1-richard.henderson@linaro.org>
This frees up one bit of the primary tlb flags without
impacting the TLB_NOTDIRTY logic.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
include/exec/cpu-all.h | 8 ++++----
accel/tcg/cputlb.c | 18 ++++++++++++++----
2 files changed, 18 insertions(+), 8 deletions(-)
diff --git a/include/exec/cpu-all.h b/include/exec/cpu-all.h
index 4422f4bb07..b5618613cc 100644
--- a/include/exec/cpu-all.h
+++ b/include/exec/cpu-all.h
@@ -325,8 +325,6 @@ CPUArchState *cpu_copy(CPUArchState *env);
#define TLB_NOTDIRTY (1 << (TARGET_PAGE_BITS_MIN - 2))
/* Set if TLB entry is an IO callback. */
#define TLB_MMIO (1 << (TARGET_PAGE_BITS_MIN - 3))
-/* Set if TLB entry contains a watchpoint. */
-#define TLB_WATCHPOINT (1 << (TARGET_PAGE_BITS_MIN - 4))
/* Set if the slow path must be used; more flags in CPUTLBEntryFull. */
#define TLB_FORCE_SLOW (1 << (TARGET_PAGE_BITS_MIN - 5))
/* Set if TLB entry writes ignored. */
@@ -338,7 +336,7 @@ CPUArchState *cpu_copy(CPUArchState *env);
*/
#define TLB_FLAGS_MASK \
(TLB_INVALID_MASK | TLB_NOTDIRTY | TLB_MMIO \
- | TLB_WATCHPOINT | TLB_FORCE_SLOW | TLB_DISCARD_WRITE)
+ | TLB_FORCE_SLOW | TLB_DISCARD_WRITE)
/*
* Flags stored in CPUTLBEntryFull.slow_flags[x].
@@ -346,8 +344,10 @@ CPUArchState *cpu_copy(CPUArchState *env);
*/
/* Set if TLB entry requires byte swap. */
#define TLB_BSWAP (1 << 0)
+/* Set if TLB entry contains a watchpoint. */
+#define TLB_WATCHPOINT (1 << 1)
-#define TLB_SLOW_FLAGS_MASK TLB_BSWAP
+#define TLB_SLOW_FLAGS_MASK (TLB_BSWAP | TLB_WATCHPOINT)
/* The two sets of flags must not overlap. */
QEMU_BUILD_BUG_ON(TLB_FLAGS_MASK & TLB_SLOW_FLAGS_MASK);
diff --git a/accel/tcg/cputlb.c b/accel/tcg/cputlb.c
index 3671846744..5b51eff5a4 100644
--- a/accel/tcg/cputlb.c
+++ b/accel/tcg/cputlb.c
@@ -1981,7 +1981,7 @@ static void *atomic_mmu_lookup(CPUArchState *env, vaddr addr, MemOpIdx oi,
*/
goto stop_the_world;
}
- /* Collect TLB_WATCHPOINT for read. */
+ /* Collect tlb flags for read. */
tlb_addr |= tlbe->addr_read;
/* Notice an IO access or a needs-MMU-lookup access */
@@ -1998,9 +1998,19 @@ static void *atomic_mmu_lookup(CPUArchState *env, vaddr addr, MemOpIdx oi,
notdirty_write(env_cpu(env), addr, size, full, retaddr);
}
- if (unlikely(tlb_addr & TLB_WATCHPOINT)) {
- cpu_check_watchpoint(env_cpu(env), addr, size, full->attrs,
- BP_MEM_READ | BP_MEM_WRITE, retaddr);
+ if (unlikely(tlb_addr & TLB_FORCE_SLOW)) {
+ int wp_flags = 0;
+
+ if (full->slow_flags[MMU_DATA_STORE] & TLB_WATCHPOINT) {
+ wp_flags |= BP_MEM_WRITE;
+ }
+ if (full->slow_flags[MMU_DATA_LOAD] & TLB_WATCHPOINT) {
+ wp_flags |= BP_MEM_READ;
+ }
+ if (wp_flags) {
+ cpu_check_watchpoint(env_cpu(env), addr, size,
+ full->attrs, wp_flags, retaddr);
+ }
}
return hostaddr;
--
2.34.1
next prev parent reply other threads:[~2023-06-26 15:45 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-26 15:39 [PULL 00/22] tcg patch queue Richard Henderson
2023-06-26 15:39 ` [PULL 01/22] accel: Replace target_ulong in tlb_*() Richard Henderson
2023-06-26 15:39 ` [PULL 02/22] accel/tcg/translate-all.c: Widen pc and cs_base Richard Henderson
2023-07-11 16:39 ` Peter Maydell
2023-06-26 15:39 ` [PULL 03/22] target: Widen pc/cs_base in cpu_get_tb_cpu_state Richard Henderson
2023-06-26 15:39 ` [PULL 04/22] accel/tcg/cputlb.c: Widen CPUTLBEntry access functions Richard Henderson
2023-06-26 15:39 ` [PULL 05/22] accel/tcg/cputlb.c: Widen addr in MMULookupPageData Richard Henderson
2023-06-26 15:39 ` [PULL 06/22] accel/tcg/cpu-exec.c: Widen pc to vaddr Richard Henderson
2023-07-11 16:40 ` Peter Maydell
2023-06-26 15:39 ` [PULL 07/22] accel/tcg: Widen pc to vaddr in CPUJumpCache Richard Henderson
2023-06-26 15:39 ` [PULL 08/22] accel: Replace target_ulong with vaddr in probe_*() Richard Henderson
2023-06-26 15:39 ` [PULL 09/22] accel/tcg: Replace target_ulong with vaddr in *_mmu_lookup() Richard Henderson
2023-06-26 15:39 ` [PULL 10/22] accel/tcg: Replace target_ulong with vaddr in translator_*() Richard Henderson
2023-06-26 15:39 ` [PULL 11/22] cpu: Replace target_ulong with hwaddr in tb_invalidate_phys_addr() Richard Henderson
2023-06-26 15:39 ` [PULL 12/22] softfloat: use QEMU_FLATTEN to avoid mistaken isra inlining Richard Henderson
2023-06-26 15:39 ` [PULL 13/22] tests/plugin: Remove duplicate insn log from libinsn.so Richard Henderson
2023-06-26 15:39 ` [PULL 14/22] accel/tcg: remove CONFIG_PROFILER Richard Henderson
2023-06-26 15:39 ` [PULL 15/22] tcg: Fix temporary variable in tcg_gen_gvec_andcs Richard Henderson
2023-06-26 15:39 ` [PULL 16/22] target/microblaze: Define TCG_GUEST_DEFAULT_MO Richard Henderson
2023-06-26 15:39 ` [PULL 17/22] tcg: Do not elide memory barriers for !CF_PARALLEL in system mode Richard Henderson
2023-06-26 15:39 ` [PULL 18/22] tcg: Add host memory barriers to cpu_ldst.h interfaces Richard Henderson
2023-06-26 15:39 ` [PULL 19/22] accel/tcg: Remove check_tcg_memory_orders_compatible Richard Henderson
2023-06-26 15:39 ` [PULL 20/22] accel/tcg: Store some tlb flags in CPUTLBEntryFull Richard Henderson
2023-06-26 15:39 ` Richard Henderson [this message]
2023-06-26 15:39 ` [PULL 22/22] accel/tcg: Renumber TLB_DISCARD_WRITE Richard Henderson
2023-06-26 18:11 ` [PULL 00/22] tcg patch queue Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230626153945.76180-22-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=philmd@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).