Re: [PATCH v6 4/5] tests/qtest/hd-geo-test: fix incorrect pcie-root-port usage and simplify test

[Igor Mammedov <imammedo@redhat.com>]

On Thu, 29 Jun 2023 09:37:06 +0530
Ani Sinha <anisinha@redhat.com> wrote:

> The test attaches a SCSI controller to a non-zero slot and a pcie-to-pci bridge
> on slot 0 on the same pcie-root-port. Since a downstream device can be attached
> to a pcie-root-port only on slot 0, the above test configuration is not allowed.
> Additionally using pcie.0 as id for pcie-to-pci bridge is incorrect as that id
> is reserved only for the root bus.
> 
> In the test scenario, there is no need to attach a pcie-root-port to the
> root complex. A SCSI controller can be attached to a pcie-to-pci bridge
> which can then be directly attached to the root bus (pcie.0).
> 
> Fix the test and simplify it.
> 
> CC: mst@redhat.com
> CC: imammedo@redhat.com
> CC: Michael Labiuk <michael.labiuk@virtuozzo.com>
> 
> Signed-off-by: Ani Sinha <anisinha@redhat.com>

Reviewed-by: Igor Mammedov <imammedo@redhat.com>

> ---
>  tests/qtest/hd-geo-test.c | 18 ++++++++----------
>  1 file changed, 8 insertions(+), 10 deletions(-)
> 
> diff --git a/tests/qtest/hd-geo-test.c b/tests/qtest/hd-geo-test.c
> index 5aa258a2b3..d08bffad91 100644
> --- a/tests/qtest/hd-geo-test.c
> +++ b/tests/qtest/hd-geo-test.c
> @@ -784,14 +784,12 @@ static void test_override_scsi(void)
>      test_override(args, "pc", expected);
>  }
>  
> -static void setup_pci_bridge(TestArgs *args, const char *id, const char *rootid)
> +static void setup_pci_bridge(TestArgs *args, const char *id)
>  {
>  
> -    char *root, *br;
> -    root = g_strdup_printf("-device pcie-root-port,id=%s", rootid);
> -    br = g_strdup_printf("-device pcie-pci-bridge,bus=%s,id=%s", rootid, id);
> +    char *br;
> +    br = g_strdup_printf("-device pcie-pci-bridge,bus=pcie.0,id=%s", id);
>  
> -    args->argc = append_arg(args->argc, args->argv, ARGV_SIZE, root);
>      args->argc = append_arg(args->argc, args->argv, ARGV_SIZE, br);
>  }
>  
> @@ -811,8 +809,8 @@ static void test_override_scsi_q35(void)
>      add_drive_with_mbr(args, empty_mbr, 1);
>      add_drive_with_mbr(args, empty_mbr, 1);
>      add_drive_with_mbr(args, empty_mbr, 1);
> -    setup_pci_bridge(args, "pcie.0", "br");
> -    add_scsi_controller(args, "lsi53c895a", "br", 3);
> +    setup_pci_bridge(args, "pcie-pci-br");
> +    add_scsi_controller(args, "lsi53c895a", "pcie-pci-br", 3);
>      add_scsi_disk(args, 0, 0, 0, 0, 0, 10000, 120, 30);
>      add_scsi_disk(args, 1, 0, 0, 1, 0, 9000, 120, 30);
>      add_scsi_disk(args, 2, 0, 0, 2, 0, 1, 0, 0);
> @@ -868,9 +866,9 @@ static void test_override_virtio_blk_q35(void)
>      };
>      add_drive_with_mbr(args, empty_mbr, 1);
>      add_drive_with_mbr(args, empty_mbr, 1);
> -    setup_pci_bridge(args, "pcie.0", "br");
> -    add_virtio_disk(args, 0, "br", 3, 10000, 120, 30);
> -    add_virtio_disk(args, 1, "br", 4, 9000, 120, 30);
> +    setup_pci_bridge(args, "pcie-pci-br");
> +    add_virtio_disk(args, 0, "pcie-pci-br", 3, 10000, 120, 30);
> +    add_virtio_disk(args, 1, "pcie-pci-br", 4, 9000, 120, 30);
>      test_override(args, "q35", expected);
>  }
>