From: "Philippe Mathieu-Daudé" <philmd@linaro.org>
To: qemu-devel@nongnu.org
Cc: "Siarhei Volkau" <lis8215@gmail.com>,
"Huacai Chen" <chenhuacai@kernel.org>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Jiaxun Yang" <jiaxun.yang@flygoat.com>
Subject: [PULL 23/44] target/mips/mxu: Add S8STD S8LDI S8SDI instructions
Date: Tue, 11 Jul 2023 00:25:50 +0200 [thread overview]
Message-ID: <20230710222611.50978-24-philmd@linaro.org> (raw)
In-Reply-To: <20230710222611.50978-1-philmd@linaro.org>
From: Siarhei Volkau <lis8215@gmail.com>
These instructions are all load/store a byte from memory
and put it into/get it from MXU register in various combinations.
I-suffix instructions modify the base address GPR by offset provided.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-21-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
target/mips/tcg/mxu_translate.c | 74 ++++++++++++++++++++++++++++++++-
1 file changed, 72 insertions(+), 2 deletions(-)
diff --git a/target/mips/tcg/mxu_translate.c b/target/mips/tcg/mxu_translate.c
index 5556fd152d..dcb0e13f93 100644
--- a/target/mips/tcg/mxu_translate.c
+++ b/target/mips/tcg/mxu_translate.c
@@ -382,6 +382,9 @@ enum {
OPC_MXU__POOL14 = 0x1C,
OPC_MXU_Q8ACCE = 0x1D,
OPC_MXU_S8LDD = 0x22,
+ OPC_MXU_S8STD = 0x23,
+ OPC_MXU_S8LDI = 0x24,
+ OPC_MXU_S8SDI = 0x25,
OPC_MXU__POOL16 = 0x27,
OPC_MXU__POOL17 = 0x28,
OPC_MXU_S32M2I = 0x2E,
@@ -633,8 +636,11 @@ static void gen_mxu_s32m2i(DisasContext *ctx)
/*
* S8LDD XRa, Rb, s8, optn3 - Load a byte from memory to XRF
+ *
+ * S8LDI XRa, Rb, s8, optn3 - Load a byte from memory to XRF,
+ * post modify address register
*/
-static void gen_mxu_s8ldd(DisasContext *ctx)
+static void gen_mxu_s8ldd(DisasContext *ctx, bool postmodify)
{
TCGv t0, t1;
uint32_t XRa, Rb, s8, optn3;
@@ -649,6 +655,9 @@ static void gen_mxu_s8ldd(DisasContext *ctx)
gen_load_gpr(t0, Rb);
tcg_gen_addi_tl(t0, t0, (int8_t)s8);
+ if (postmodify) {
+ gen_store_gpr(t0, Rb);
+ }
switch (optn3) {
/* XRa[7:0] = tmp8 */
@@ -705,6 +714,58 @@ static void gen_mxu_s8ldd(DisasContext *ctx)
gen_store_mxu_gpr(t0, XRa);
}
+/*
+ * S8STD XRa, Rb, s8, optn3 - Store a byte from XRF to memory
+ *
+ * S8SDI XRa, Rb, s8, optn3 - Store a byte from XRF to memory,
+ * post modify address register
+ */
+static void gen_mxu_s8std(DisasContext *ctx, bool postmodify)
+{
+ TCGv t0, t1;
+ uint32_t XRa, Rb, s8, optn3;
+
+ t0 = tcg_temp_new();
+ t1 = tcg_temp_new();
+
+ XRa = extract32(ctx->opcode, 6, 4);
+ s8 = extract32(ctx->opcode, 10, 8);
+ optn3 = extract32(ctx->opcode, 18, 3);
+ Rb = extract32(ctx->opcode, 21, 5);
+
+ if (optn3 > 3) {
+ /* reserved, do nothing */
+ return;
+ }
+
+ gen_load_gpr(t0, Rb);
+ tcg_gen_addi_tl(t0, t0, (int8_t)s8);
+ if (postmodify) {
+ gen_store_gpr(t0, Rb);
+ }
+ gen_load_mxu_gpr(t1, XRa);
+
+ switch (optn3) {
+ /* XRa[7:0] => tmp8 */
+ case MXU_OPTN3_PTN0:
+ tcg_gen_extract_tl(t1, t1, 0, 8);
+ break;
+ /* XRa[15:8] => tmp8 */
+ case MXU_OPTN3_PTN1:
+ tcg_gen_extract_tl(t1, t1, 8, 8);
+ break;
+ /* XRa[23:16] => tmp8 */
+ case MXU_OPTN3_PTN2:
+ tcg_gen_extract_tl(t1, t1, 16, 8);
+ break;
+ /* XRa[31:24] => tmp8 */
+ case MXU_OPTN3_PTN3:
+ tcg_gen_extract_tl(t1, t1, 24, 8);
+ break;
+ }
+
+ tcg_gen_qemu_st_tl(t1, t0, ctx->mem_idx, MO_UB);
+}
/*
* D16MUL XRa, XRb, XRc, XRd, optn2 - Signed 16 bit pattern multiplication
* D16MULF XRa, XRb, XRc, optn2 - Signed Q15 fraction pattern multiplication
@@ -3707,7 +3768,16 @@ bool decode_ase_mxu(DisasContext *ctx, uint32_t insn)
gen_mxu_q8adde(ctx, true);
break;
case OPC_MXU_S8LDD:
- gen_mxu_s8ldd(ctx);
+ gen_mxu_s8ldd(ctx, false);
+ break;
+ case OPC_MXU_S8STD:
+ gen_mxu_s8std(ctx, false);
+ break;
+ case OPC_MXU_S8LDI:
+ gen_mxu_s8ldd(ctx, true);
+ break;
+ case OPC_MXU_S8SDI:
+ gen_mxu_s8std(ctx, true);
break;
case OPC_MXU__POOL16:
decode_opc_mxu__pool16(ctx);
--
2.38.1
next prev parent reply other threads:[~2023-07-10 22:31 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-10 22:25 [PULL 00/44] MIPS patches for 2023-07-10 Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 01/44] target/mips: Rework cp0_timer with clock API Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 02/44] target/mips: Implement Loongson CSR instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 03/44] hw/mips/loongson3_virt: Relax CPU restrictions for TCG Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 04/44] target/mips: Add emulation of MXU instructions for 32-bit load/store Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 05/44] target/mips: Add support of two XBurst CPUs Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 06/44] target/mips/mxu: Add LXW LXB LXH LXBU LXHU instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 07/44] target/mips/mxu: Add S32MADD/MADDU/MSUB/MSUBU instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 08/44] target/mips/mxu: Add Q8SLT Q8SLTU instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 09/44] target/mips/mxu: Fix D16MAX D16MIN Q8MAX Q8MIN instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 10/44] target/mips/mxu: Add S32SLT D16SLT D16AVG[R] Q8AVG[R] insns Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 11/44] target/mips/mxu: Add Q8ADD instruction Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 12/44] target/mips/mxu: Add S32CPS D16CPS Q8ABD Q16SAT insns Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 13/44] target/mips/mxu: Add D16MULF D16MULE instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 14/44] target/mips/mxu: Add D16MACF D16MACE instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 15/44] target/mips/mxu: Add D16MADL instruction Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 16/44] target/mips/mxu: Add S16MAD instruction Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 17/44] target/mips/mxu: Add Q16ADD instruction Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 18/44] target/mips/mxu: Add D32ADD instruction Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 19/44] target/mips/mxu: Add D32ACC D32ACCM D32ASUM instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 20/44] target/mips/mxu: Add D32ADDC instruction Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 21/44] target/mips/mxu: Add Q16ACC Q16ACCM D16ASUM instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 22/44] target/mips/mxu: Add Q8ADDE Q8ACCE D8SUM D8SUMC instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` Philippe Mathieu-Daudé [this message]
2023-07-10 22:25 ` [PULL 24/44] target/mips/mxu: Add S16LDD S16STD S16LDI S16SDI instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 25/44] target/mips/mxu: Add S32MUL S32MULU S32EXTR S32EXTRV insns Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 26/44] target/mips/mxu: Add S32ALN S32LUI insns Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 27/44] target/mips/mxu: Add D32SARL D32SARW instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 28/44] target/mips/mxu: Add D32SLL D32SLR D32SAR instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 29/44] target/mips/mxu: Add Q16SLL Q16SLR Q16SAR instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 30/44] target/mips/mxu: Add D32/Q16- SLLV/SLRV/SARV instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 31/44] target/mips/mxu: Add S32/D16/Q8- MOVZ/MOVN instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 32/44] target/mips/mxu: Add Q8MAC Q8MACSU instructions Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 33/44] target/mips/mxu: Add Q16SCOP instruction Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 34/44] target/mips/mxu: Add Q8MADL instruction Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 35/44] target/mips/mxu: Add S32SFL instruction Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 36/44] target/mips/mxu: Add Q8SAD instruction Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 37/44] target/mips: enable GINVx support for I6400 and I6500 Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 38/44] hw/ide/pci: Expose legacy interrupts as named GPIOs Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 39/44] hw/ide/via: Wire up IDE legacy interrupts in host device Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 40/44] hw/isa/vt82c686: Remove via_isa_set_irq() Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 41/44] hw/ide: Extract IDEBus assignment into bmdma_init() Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 42/44] hw/ide: Extract bmdma_status_writeb() Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 43/44] hw/ide/pci: Replace some magic numbers by constants Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 44/44] hw/ide/piix: Move registration of VMStateDescription to DeviceClass Philippe Mathieu-Daudé
2023-07-11 8:32 ` [PULL 00/44] MIPS patches for 2023-07-10 Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230710222611.50978-24-philmd@linaro.org \
--to=philmd@linaro.org \
--cc=chenhuacai@kernel.org \
--cc=jiaxun.yang@flygoat.com \
--cc=lis8215@gmail.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).