From: "Philippe Mathieu-Daudé" <philmd@linaro.org>
To: qemu-devel@nongnu.org
Cc: "Siarhei Volkau" <lis8215@gmail.com>,
"Huacai Chen" <chenhuacai@kernel.org>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Jiaxun Yang" <jiaxun.yang@flygoat.com>
Subject: [PULL 27/44] target/mips/mxu: Add D32SARL D32SARW instructions
Date: Tue, 11 Jul 2023 00:25:54 +0200 [thread overview]
Message-ID: <20230710222611.50978-28-philmd@linaro.org> (raw)
In-Reply-To: <20230710222611.50978-1-philmd@linaro.org>
From: Siarhei Volkau <lis8215@gmail.com>
These instructions are dual 32-bit arithmetic shift right and
pack LSBs to 2x 16-bit into a MXU register.
The difference is the shift amount source: immediate or GP reg.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-25-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
target/mips/tcg/mxu_translate.c | 59 +++++++++++++++++++++++++++++++++
1 file changed, 59 insertions(+)
diff --git a/target/mips/tcg/mxu_translate.c b/target/mips/tcg/mxu_translate.c
index 4f07201fcc..36fb4232cd 100644
--- a/target/mips/tcg/mxu_translate.c
+++ b/target/mips/tcg/mxu_translate.c
@@ -394,6 +394,7 @@ enum {
OPC_MXU_S16SDI = 0x2D,
OPC_MXU_S32M2I = 0x2E,
OPC_MXU_S32I2M = 0x2F,
+ OPC_MXU_D32SARL = 0x32,
OPC_MXU__POOL19 = 0x38,
};
@@ -492,6 +493,7 @@ enum {
* MXU pool 16
*/
enum {
+ OPC_MXU_D32SARW = 0x00,
OPC_MXU_S32ALN = 0x01,
OPC_MXU_S32ALNI = 0x02,
OPC_MXU_S32LUI = 0x03,
@@ -1689,6 +1691,57 @@ static void gen_mxu_S32XOR(DisasContext *ctx)
}
}
+/*
+ * MXU instruction category: shift
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * D32SLL D32SLR D32SAR D32SARL
+ * D32SLLV D32SLRV D32SARV D32SARW
+ * Q16SLL Q16SLR Q16SAR
+ * Q16SLLV Q16SLRV Q16SARV
+ */
+
+/*
+ * D32SARL XRa, XRb, XRc, SFT4
+ * Dual shift arithmetic right 32-bit integers in XRb and XRc
+ * to SFT4 bits (0..15). Pack 16 LSBs of each into XRa.
+ *
+ * D32SARW XRa, XRb, XRc, rb
+ * Dual shift arithmetic right 32-bit integers in XRb and XRc
+ * to rb[3:0] bits. Pack 16 LSBs of each into XRa.
+ */
+static void gen_mxu_d32sarl(DisasContext *ctx, bool sarw)
+{
+ uint32_t XRa, XRb, XRc, rb;
+
+ XRa = extract32(ctx->opcode, 6, 4);
+ XRb = extract32(ctx->opcode, 10, 4);
+ XRc = extract32(ctx->opcode, 14, 4);
+ rb = extract32(ctx->opcode, 21, 5);
+
+ if (unlikely(XRa == 0)) {
+ /* destination is zero register -> do nothing */
+ } else {
+ TCGv t0 = tcg_temp_new();
+ TCGv t1 = tcg_temp_new();
+ TCGv t2 = tcg_temp_new();
+
+ if (!sarw) {
+ /* Make SFT4 from rb field */
+ tcg_gen_movi_tl(t2, rb >> 1);
+ } else {
+ gen_load_gpr(t2, rb);
+ tcg_gen_andi_tl(t2, t2, 0x0f);
+ }
+ gen_load_mxu_gpr(t0, XRb);
+ gen_load_mxu_gpr(t1, XRc);
+ tcg_gen_sar_tl(t0, t0, t2);
+ tcg_gen_sar_tl(t1, t1, t2);
+ tcg_gen_extract_tl(t2, t1, 0, 16);
+ tcg_gen_deposit_tl(t2, t2, t0, 16, 16);
+ gen_store_mxu_gpr(t2, XRa);
+ }
+}
/*
* MXU instruction category max/min/avg
@@ -4003,6 +4056,9 @@ static void decode_opc_mxu__pool16(DisasContext *ctx)
uint32_t opcode = extract32(ctx->opcode, 18, 3);
switch (opcode) {
+ case OPC_MXU_D32SARW:
+ gen_mxu_d32sarl(ctx, true);
+ break;
case OPC_MXU_S32ALN:
gen_mxu_S32ALN(ctx);
break;
@@ -4214,6 +4270,9 @@ bool decode_ase_mxu(DisasContext *ctx, uint32_t insn)
case OPC_MXU_S16SDI:
gen_mxu_s16std(ctx, true);
break;
+ case OPC_MXU_D32SARL:
+ gen_mxu_d32sarl(ctx, false);
+ break;
case OPC_MXU__POOL19:
decode_opc_mxu__pool19(ctx);
break;
--
2.38.1
next prev parent reply other threads:[~2023-07-10 22:33 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-10 22:25 [PULL 00/44] MIPS patches for 2023-07-10 Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 01/44] target/mips: Rework cp0_timer with clock API Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 02/44] target/mips: Implement Loongson CSR instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 03/44] hw/mips/loongson3_virt: Relax CPU restrictions for TCG Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 04/44] target/mips: Add emulation of MXU instructions for 32-bit load/store Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 05/44] target/mips: Add support of two XBurst CPUs Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 06/44] target/mips/mxu: Add LXW LXB LXH LXBU LXHU instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 07/44] target/mips/mxu: Add S32MADD/MADDU/MSUB/MSUBU instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 08/44] target/mips/mxu: Add Q8SLT Q8SLTU instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 09/44] target/mips/mxu: Fix D16MAX D16MIN Q8MAX Q8MIN instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 10/44] target/mips/mxu: Add S32SLT D16SLT D16AVG[R] Q8AVG[R] insns Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 11/44] target/mips/mxu: Add Q8ADD instruction Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 12/44] target/mips/mxu: Add S32CPS D16CPS Q8ABD Q16SAT insns Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 13/44] target/mips/mxu: Add D16MULF D16MULE instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 14/44] target/mips/mxu: Add D16MACF D16MACE instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 15/44] target/mips/mxu: Add D16MADL instruction Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 16/44] target/mips/mxu: Add S16MAD instruction Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 17/44] target/mips/mxu: Add Q16ADD instruction Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 18/44] target/mips/mxu: Add D32ADD instruction Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 19/44] target/mips/mxu: Add D32ACC D32ACCM D32ASUM instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 20/44] target/mips/mxu: Add D32ADDC instruction Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 21/44] target/mips/mxu: Add Q16ACC Q16ACCM D16ASUM instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 22/44] target/mips/mxu: Add Q8ADDE Q8ACCE D8SUM D8SUMC instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 23/44] target/mips/mxu: Add S8STD S8LDI S8SDI instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 24/44] target/mips/mxu: Add S16LDD S16STD S16LDI S16SDI instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 25/44] target/mips/mxu: Add S32MUL S32MULU S32EXTR S32EXTRV insns Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 26/44] target/mips/mxu: Add S32ALN S32LUI insns Philippe Mathieu-Daudé
2023-07-10 22:25 ` Philippe Mathieu-Daudé [this message]
2023-07-10 22:25 ` [PULL 28/44] target/mips/mxu: Add D32SLL D32SLR D32SAR instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 29/44] target/mips/mxu: Add Q16SLL Q16SLR Q16SAR instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 30/44] target/mips/mxu: Add D32/Q16- SLLV/SLRV/SARV instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 31/44] target/mips/mxu: Add S32/D16/Q8- MOVZ/MOVN instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 32/44] target/mips/mxu: Add Q8MAC Q8MACSU instructions Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 33/44] target/mips/mxu: Add Q16SCOP instruction Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 34/44] target/mips/mxu: Add Q8MADL instruction Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 35/44] target/mips/mxu: Add S32SFL instruction Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 36/44] target/mips/mxu: Add Q8SAD instruction Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 37/44] target/mips: enable GINVx support for I6400 and I6500 Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 38/44] hw/ide/pci: Expose legacy interrupts as named GPIOs Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 39/44] hw/ide/via: Wire up IDE legacy interrupts in host device Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 40/44] hw/isa/vt82c686: Remove via_isa_set_irq() Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 41/44] hw/ide: Extract IDEBus assignment into bmdma_init() Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 42/44] hw/ide: Extract bmdma_status_writeb() Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 43/44] hw/ide/pci: Replace some magic numbers by constants Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 44/44] hw/ide/piix: Move registration of VMStateDescription to DeviceClass Philippe Mathieu-Daudé
2023-07-11 8:32 ` [PULL 00/44] MIPS patches for 2023-07-10 Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230710222611.50978-28-philmd@linaro.org \
--to=philmd@linaro.org \
--cc=chenhuacai@kernel.org \
--cc=jiaxun.yang@flygoat.com \
--cc=lis8215@gmail.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).