From: "Philippe Mathieu-Daudé" <philmd@linaro.org>
To: qemu-devel@nongnu.org
Cc: "Siarhei Volkau" <lis8215@gmail.com>,
"Huacai Chen" <chenhuacai@kernel.org>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Jiaxun Yang" <jiaxun.yang@flygoat.com>
Subject: [PULL 35/44] target/mips/mxu: Add S32SFL instruction
Date: Tue, 11 Jul 2023 00:26:02 +0200 [thread overview]
Message-ID: <20230710222611.50978-36-philmd@linaro.org> (raw)
In-Reply-To: <20230710222611.50978-1-philmd@linaro.org>
From: Siarhei Volkau <lis8215@gmail.com>
The instruction shuffles 8 bytes in two registers by
one of 4 predefined patterns.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-33-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
target/mips/tcg/mxu_translate.c | 81 +++++++++++++++++++++++++++++++++
1 file changed, 81 insertions(+)
diff --git a/target/mips/tcg/mxu_translate.c b/target/mips/tcg/mxu_translate.c
index 84c52c55d6..c60404f739 100644
--- a/target/mips/tcg/mxu_translate.c
+++ b/target/mips/tcg/mxu_translate.c
@@ -407,6 +407,7 @@ enum {
OPC_MXU__POOL21 = 0x3A,
OPC_MXU_Q16SCOP = 0x3B,
OPC_MXU_Q8MADL = 0x3C,
+ OPC_MXU_S32SFL = 0x3D,
};
@@ -3961,6 +3962,83 @@ static void gen_mxu_q16scop(DisasContext *ctx)
gen_store_mxu_gpr(t4, XRd);
}
+/*
+ * S32SFL XRa, XRd, XRb, XRc
+ * Shuffle bytes according to one of four patterns.
+ */
+static void gen_mxu_s32sfl(DisasContext *ctx)
+{
+ uint32_t XRd, XRc, XRb, XRa, ptn2;
+
+ XRd = extract32(ctx->opcode, 18, 4);
+ XRc = extract32(ctx->opcode, 14, 4);
+ XRb = extract32(ctx->opcode, 10, 4);
+ XRa = extract32(ctx->opcode, 6, 4);
+ ptn2 = extract32(ctx->opcode, 24, 2);
+
+ TCGv t0 = tcg_temp_new();
+ TCGv t1 = tcg_temp_new();
+ TCGv t2 = tcg_temp_new();
+ TCGv t3 = tcg_temp_new();
+
+ gen_load_mxu_gpr(t0, XRb);
+ gen_load_mxu_gpr(t1, XRc);
+
+ switch (ptn2) {
+ case 0:
+ tcg_gen_andi_tl(t2, t0, 0xff000000);
+ tcg_gen_andi_tl(t3, t1, 0x000000ff);
+ tcg_gen_deposit_tl(t3, t3, t0, 8, 8);
+ tcg_gen_shri_tl(t0, t0, 8);
+ tcg_gen_shri_tl(t1, t1, 8);
+ tcg_gen_deposit_tl(t3, t3, t0, 24, 8);
+ tcg_gen_deposit_tl(t3, t3, t1, 16, 8);
+ tcg_gen_shri_tl(t0, t0, 8);
+ tcg_gen_shri_tl(t1, t1, 8);
+ tcg_gen_deposit_tl(t2, t2, t0, 8, 8);
+ tcg_gen_deposit_tl(t2, t2, t1, 0, 8);
+ tcg_gen_shri_tl(t1, t1, 8);
+ tcg_gen_deposit_tl(t2, t2, t1, 16, 8);
+ break;
+ case 1:
+ tcg_gen_andi_tl(t2, t0, 0xff000000);
+ tcg_gen_andi_tl(t3, t1, 0x000000ff);
+ tcg_gen_deposit_tl(t3, t3, t0, 16, 8);
+ tcg_gen_shri_tl(t0, t0, 8);
+ tcg_gen_shri_tl(t1, t1, 8);
+ tcg_gen_deposit_tl(t2, t2, t0, 16, 8);
+ tcg_gen_deposit_tl(t2, t2, t1, 0, 8);
+ tcg_gen_shri_tl(t0, t0, 8);
+ tcg_gen_shri_tl(t1, t1, 8);
+ tcg_gen_deposit_tl(t3, t3, t0, 24, 8);
+ tcg_gen_deposit_tl(t3, t3, t1, 8, 8);
+ tcg_gen_shri_tl(t1, t1, 8);
+ tcg_gen_deposit_tl(t2, t2, t1, 8, 8);
+ break;
+ case 2:
+ tcg_gen_andi_tl(t2, t0, 0xff00ff00);
+ tcg_gen_andi_tl(t3, t1, 0x00ff00ff);
+ tcg_gen_deposit_tl(t3, t3, t0, 8, 8);
+ tcg_gen_shri_tl(t0, t0, 16);
+ tcg_gen_shri_tl(t1, t1, 8);
+ tcg_gen_deposit_tl(t2, t2, t1, 0, 8);
+ tcg_gen_deposit_tl(t3, t3, t0, 24, 8);
+ tcg_gen_shri_tl(t1, t1, 16);
+ tcg_gen_deposit_tl(t2, t2, t1, 16, 8);
+ break;
+ case 3:
+ tcg_gen_andi_tl(t2, t0, 0xffff0000);
+ tcg_gen_andi_tl(t3, t1, 0x0000ffff);
+ tcg_gen_shri_tl(t1, t1, 16);
+ tcg_gen_deposit_tl(t2, t2, t1, 0, 16);
+ tcg_gen_deposit_tl(t3, t3, t0, 16, 16);
+ break;
+ }
+
+ gen_store_mxu_gpr(t2, XRa);
+ gen_store_mxu_gpr(t3, XRd);
+}
+
/*
* MXU instruction category: align
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -4959,6 +5037,9 @@ bool decode_ase_mxu(DisasContext *ctx, uint32_t insn)
case OPC_MXU_Q8MADL:
gen_mxu_q8madl(ctx);
break;
+ case OPC_MXU_S32SFL:
+ gen_mxu_s32sfl(ctx);
+ break;
default:
return false;
}
--
2.38.1
next prev parent reply other threads:[~2023-07-10 22:29 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-10 22:25 [PULL 00/44] MIPS patches for 2023-07-10 Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 01/44] target/mips: Rework cp0_timer with clock API Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 02/44] target/mips: Implement Loongson CSR instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 03/44] hw/mips/loongson3_virt: Relax CPU restrictions for TCG Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 04/44] target/mips: Add emulation of MXU instructions for 32-bit load/store Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 05/44] target/mips: Add support of two XBurst CPUs Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 06/44] target/mips/mxu: Add LXW LXB LXH LXBU LXHU instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 07/44] target/mips/mxu: Add S32MADD/MADDU/MSUB/MSUBU instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 08/44] target/mips/mxu: Add Q8SLT Q8SLTU instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 09/44] target/mips/mxu: Fix D16MAX D16MIN Q8MAX Q8MIN instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 10/44] target/mips/mxu: Add S32SLT D16SLT D16AVG[R] Q8AVG[R] insns Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 11/44] target/mips/mxu: Add Q8ADD instruction Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 12/44] target/mips/mxu: Add S32CPS D16CPS Q8ABD Q16SAT insns Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 13/44] target/mips/mxu: Add D16MULF D16MULE instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 14/44] target/mips/mxu: Add D16MACF D16MACE instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 15/44] target/mips/mxu: Add D16MADL instruction Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 16/44] target/mips/mxu: Add S16MAD instruction Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 17/44] target/mips/mxu: Add Q16ADD instruction Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 18/44] target/mips/mxu: Add D32ADD instruction Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 19/44] target/mips/mxu: Add D32ACC D32ACCM D32ASUM instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 20/44] target/mips/mxu: Add D32ADDC instruction Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 21/44] target/mips/mxu: Add Q16ACC Q16ACCM D16ASUM instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 22/44] target/mips/mxu: Add Q8ADDE Q8ACCE D8SUM D8SUMC instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 23/44] target/mips/mxu: Add S8STD S8LDI S8SDI instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 24/44] target/mips/mxu: Add S16LDD S16STD S16LDI S16SDI instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 25/44] target/mips/mxu: Add S32MUL S32MULU S32EXTR S32EXTRV insns Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 26/44] target/mips/mxu: Add S32ALN S32LUI insns Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 27/44] target/mips/mxu: Add D32SARL D32SARW instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 28/44] target/mips/mxu: Add D32SLL D32SLR D32SAR instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 29/44] target/mips/mxu: Add Q16SLL Q16SLR Q16SAR instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 30/44] target/mips/mxu: Add D32/Q16- SLLV/SLRV/SARV instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 31/44] target/mips/mxu: Add S32/D16/Q8- MOVZ/MOVN instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 32/44] target/mips/mxu: Add Q8MAC Q8MACSU instructions Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 33/44] target/mips/mxu: Add Q16SCOP instruction Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 34/44] target/mips/mxu: Add Q8MADL instruction Philippe Mathieu-Daudé
2023-07-10 22:26 ` Philippe Mathieu-Daudé [this message]
2023-07-10 22:26 ` [PULL 36/44] target/mips/mxu: Add Q8SAD instruction Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 37/44] target/mips: enable GINVx support for I6400 and I6500 Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 38/44] hw/ide/pci: Expose legacy interrupts as named GPIOs Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 39/44] hw/ide/via: Wire up IDE legacy interrupts in host device Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 40/44] hw/isa/vt82c686: Remove via_isa_set_irq() Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 41/44] hw/ide: Extract IDEBus assignment into bmdma_init() Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 42/44] hw/ide: Extract bmdma_status_writeb() Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 43/44] hw/ide/pci: Replace some magic numbers by constants Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 44/44] hw/ide/piix: Move registration of VMStateDescription to DeviceClass Philippe Mathieu-Daudé
2023-07-11 8:32 ` [PULL 00/44] MIPS patches for 2023-07-10 Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230710222611.50978-36-philmd@linaro.org \
--to=philmd@linaro.org \
--cc=chenhuacai@kernel.org \
--cc=jiaxun.yang@flygoat.com \
--cc=lis8215@gmail.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).