qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Philippe Mathieu-Daudé" <philmd@linaro.org>
To: qemu-devel@nongnu.org
Cc: "Siarhei Volkau" <lis8215@gmail.com>,
	"Huacai Chen" <chenhuacai@kernel.org>,
	"Philippe Mathieu-Daudé" <philmd@linaro.org>,
	"Jiaxun Yang" <jiaxun.yang@flygoat.com>
Subject: [PULL 08/44] target/mips/mxu: Add Q8SLT Q8SLTU instructions
Date: Tue, 11 Jul 2023 00:25:35 +0200	[thread overview]
Message-ID: <20230710222611.50978-9-philmd@linaro.org> (raw)
In-Reply-To: <20230710222611.50978-1-philmd@linaro.org>

From: Siarhei Volkau <lis8215@gmail.com>

These instructions are used to set bits depending on
comparison result in each byte respectively.

Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Message-Id: <20230608104222.1520143-6-lis8215@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
 target/mips/tcg/mxu_translate.c | 65 +++++++++++++++++++++++++++++++++
 1 file changed, 65 insertions(+)

diff --git a/target/mips/tcg/mxu_translate.c b/target/mips/tcg/mxu_translate.c
index 00a4d1da18..6d25562710 100644
--- a/target/mips/tcg/mxu_translate.c
+++ b/target/mips/tcg/mxu_translate.c
@@ -387,6 +387,8 @@ enum {
     OPC_MXU_D16MIN   = 0x03,
     OPC_MXU_Q8MAX    = 0x04,
     OPC_MXU_Q8MIN    = 0x05,
+    OPC_MXU_Q8SLT    = 0x06,
+    OPC_MXU_Q8SLTU   = 0x07,
 };
 
 /*
@@ -1397,6 +1399,63 @@ static void gen_mxu_Q8MAX_Q8MIN(DisasContext *ctx)
     }
 }
 
+/*
+ *  Q8SLT
+ *    Update XRa with the signed "set less than" comparison of XRb and XRc
+ *    on per-byte basis.
+ *    a.k.a. XRa[0..3] = XRb[0..3] < XRc[0..3] ? 1 : 0;
+ *
+ *  Q8SLTU
+ *    Update XRa with the unsigned "set less than" comparison of XRb and XRc
+ *    on per-byte basis.
+ *    a.k.a. XRa[0..3] = XRb[0..3] < XRc[0..3] ? 1 : 0;
+ */
+static void gen_mxu_q8slt(DisasContext *ctx, bool sltu)
+{
+    uint32_t pad, XRc, XRb, XRa;
+
+    pad = extract32(ctx->opcode, 21, 5);
+    XRc = extract32(ctx->opcode, 14, 4);
+    XRb = extract32(ctx->opcode, 10, 4);
+    XRa = extract32(ctx->opcode,  6, 4);
+
+    if (unlikely(pad != 0)) {
+        /* opcode padding incorrect -> do nothing */
+    } else if (unlikely(XRa == 0)) {
+        /* destination is zero register -> do nothing */
+    } else if (unlikely((XRb == 0) && (XRc == 0))) {
+        /* both operands zero registers -> just set destination to zero */
+        tcg_gen_movi_tl(mxu_gpr[XRa - 1], 0);
+    } else if (unlikely(XRb == XRc)) {
+        /* both operands same registers -> just set destination to zero */
+        tcg_gen_movi_tl(mxu_gpr[XRa - 1], 0);
+    } else {
+        /* the most general case */
+        TCGv t0 = tcg_temp_new();
+        TCGv t1 = tcg_temp_new();
+        TCGv t2 = tcg_temp_new();
+        TCGv t3 = tcg_temp_new();
+        TCGv t4 = tcg_temp_new();
+
+        gen_load_mxu_gpr(t3, XRb);
+        gen_load_mxu_gpr(t4, XRc);
+        tcg_gen_movi_tl(t2, 0);
+
+        for (int i = 0; i < 4; i++) {
+            if (sltu) {
+                tcg_gen_extract_tl(t0, t3, 8 * i, 8);
+                tcg_gen_extract_tl(t1, t4, 8 * i, 8);
+            } else {
+                tcg_gen_sextract_tl(t0, t3, 8 * i, 8);
+                tcg_gen_sextract_tl(t1, t4, 8 * i, 8);
+            }
+            tcg_gen_setcond_tl(TCG_COND_LT, t0, t0, t1);
+            tcg_gen_deposit_tl(t2, t2, t0, 8 * i, 8);
+        }
+        gen_store_mxu_gpr(t2, XRa);
+    }
+}
+
 
 /*
  *                 MXU instruction category: align
@@ -1662,6 +1721,12 @@ static void decode_opc_mxu__pool00(DisasContext *ctx)
     case OPC_MXU_Q8MIN:
         gen_mxu_Q8MAX_Q8MIN(ctx);
         break;
+    case OPC_MXU_Q8SLT:
+        gen_mxu_q8slt(ctx, false);
+        break;
+    case OPC_MXU_Q8SLTU:
+        gen_mxu_q8slt(ctx, true);
+        break;
     default:
         MIPS_INVAL("decode_opc_mxu");
         gen_reserved_instruction(ctx);
-- 
2.38.1



  parent reply	other threads:[~2023-07-10 22:27 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-07-10 22:25 [PULL 00/44] MIPS patches for 2023-07-10 Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 01/44] target/mips: Rework cp0_timer with clock API Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 02/44] target/mips: Implement Loongson CSR instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 03/44] hw/mips/loongson3_virt: Relax CPU restrictions for TCG Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 04/44] target/mips: Add emulation of MXU instructions for 32-bit load/store Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 05/44] target/mips: Add support of two XBurst CPUs Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 06/44] target/mips/mxu: Add LXW LXB LXH LXBU LXHU instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 07/44] target/mips/mxu: Add S32MADD/MADDU/MSUB/MSUBU instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` Philippe Mathieu-Daudé [this message]
2023-07-10 22:25 ` [PULL 09/44] target/mips/mxu: Fix D16MAX D16MIN Q8MAX Q8MIN instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 10/44] target/mips/mxu: Add S32SLT D16SLT D16AVG[R] Q8AVG[R] insns Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 11/44] target/mips/mxu: Add Q8ADD instruction Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 12/44] target/mips/mxu: Add S32CPS D16CPS Q8ABD Q16SAT insns Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 13/44] target/mips/mxu: Add D16MULF D16MULE instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 14/44] target/mips/mxu: Add D16MACF D16MACE instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 15/44] target/mips/mxu: Add D16MADL instruction Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 16/44] target/mips/mxu: Add S16MAD instruction Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 17/44] target/mips/mxu: Add Q16ADD instruction Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 18/44] target/mips/mxu: Add D32ADD instruction Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 19/44] target/mips/mxu: Add D32ACC D32ACCM D32ASUM instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 20/44] target/mips/mxu: Add D32ADDC instruction Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 21/44] target/mips/mxu: Add Q16ACC Q16ACCM D16ASUM instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 22/44] target/mips/mxu: Add Q8ADDE Q8ACCE D8SUM D8SUMC instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 23/44] target/mips/mxu: Add S8STD S8LDI S8SDI instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 24/44] target/mips/mxu: Add S16LDD S16STD S16LDI S16SDI instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 25/44] target/mips/mxu: Add S32MUL S32MULU S32EXTR S32EXTRV insns Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 26/44] target/mips/mxu: Add S32ALN S32LUI insns Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 27/44] target/mips/mxu: Add D32SARL D32SARW instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 28/44] target/mips/mxu: Add D32SLL D32SLR D32SAR instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 29/44] target/mips/mxu: Add Q16SLL Q16SLR Q16SAR instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 30/44] target/mips/mxu: Add D32/Q16- SLLV/SLRV/SARV instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 31/44] target/mips/mxu: Add S32/D16/Q8- MOVZ/MOVN instructions Philippe Mathieu-Daudé
2023-07-10 22:25 ` [PULL 32/44] target/mips/mxu: Add Q8MAC Q8MACSU instructions Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 33/44] target/mips/mxu: Add Q16SCOP instruction Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 34/44] target/mips/mxu: Add Q8MADL instruction Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 35/44] target/mips/mxu: Add S32SFL instruction Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 36/44] target/mips/mxu: Add Q8SAD instruction Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 37/44] target/mips: enable GINVx support for I6400 and I6500 Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 38/44] hw/ide/pci: Expose legacy interrupts as named GPIOs Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 39/44] hw/ide/via: Wire up IDE legacy interrupts in host device Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 40/44] hw/isa/vt82c686: Remove via_isa_set_irq() Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 41/44] hw/ide: Extract IDEBus assignment into bmdma_init() Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 42/44] hw/ide: Extract bmdma_status_writeb() Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 43/44] hw/ide/pci: Replace some magic numbers by constants Philippe Mathieu-Daudé
2023-07-10 22:26 ` [PULL 44/44] hw/ide/piix: Move registration of VMStateDescription to DeviceClass Philippe Mathieu-Daudé
2023-07-11  8:32 ` [PULL 00/44] MIPS patches for 2023-07-10 Richard Henderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230710222611.50978-9-philmd@linaro.org \
    --to=philmd@linaro.org \
    --cc=chenhuacai@kernel.org \
    --cc=jiaxun.yang@flygoat.com \
    --cc=lis8215@gmail.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).