qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Avihai Horon <avihaih@nvidia.com>
To: <qemu-devel@nongnu.org>
Cc: "Alex Williamson" <alex.williamson@redhat.com>,
	"Cédric Le Goater" <clg@redhat.com>,
	"Paolo Bonzini" <pbonzini@redhat.com>,
	"Joao Martins" <joao.m.martins@oracle.com>,
	"Yishai Hadas" <yishaih@nvidia.com>,
	"Jason Gunthorpe" <jgg@nvidia.com>,
	"Maor Gottlieb" <maorg@nvidia.com>,
	"Kirti Wankhede" <kwankhede@nvidia.com>,
	"Tarun Gupta" <targupta@nvidia.com>,
	"Avihai Horon" <avihaih@nvidia.com>
Subject: [PATCH for-8.2 4/6] vfio/migration: Refactor PRE_COPY and RUNNING state checks
Date: Sun, 16 Jul 2023 11:15:39 +0300	[thread overview]
Message-ID: <20230716081541.27900-5-avihaih@nvidia.com> (raw)
In-Reply-To: <20230716081541.27900-1-avihaih@nvidia.com>

From: Joao Martins <joao.m.martins@oracle.com>

Move the PRE_COPY and RUNNING state checks to helper functions.

This is in preparation for adding P2P VFIO migration support, where
these helpers will also test for PRE_COPY_P2P and RUNNING_P2P states.

Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
---
 include/hw/vfio/vfio-common.h |  2 ++
 hw/vfio/common.c              | 22 ++++++++++++++++++----
 hw/vfio/migration.c           | 10 ++++------
 3 files changed, 24 insertions(+), 10 deletions(-)

diff --git a/include/hw/vfio/vfio-common.h b/include/hw/vfio/vfio-common.h
index da43d27352..e9b8954595 100644
--- a/include/hw/vfio/vfio-common.h
+++ b/include/hw/vfio/vfio-common.h
@@ -230,6 +230,8 @@ void vfio_unblock_multiple_devices_migration(void);
 bool vfio_viommu_preset(VFIODevice *vbasedev);
 int64_t vfio_mig_bytes_transferred(void);
 void vfio_reset_bytes_transferred(void);
+bool vfio_device_state_is_running(VFIODevice *vbasedev);
+bool vfio_device_state_is_precopy(VFIODevice *vbasedev);
 
 #ifdef CONFIG_LINUX
 int vfio_get_region_info(VFIODevice *vbasedev, int index,
diff --git a/hw/vfio/common.c b/hw/vfio/common.c
index 9aac21abb7..16cf79a76c 100644
--- a/hw/vfio/common.c
+++ b/hw/vfio/common.c
@@ -437,6 +437,20 @@ static void vfio_set_migration_error(int err)
     }
 }
 
+bool vfio_device_state_is_running(VFIODevice *vbasedev)
+{
+    VFIOMigration *migration = vbasedev->migration;
+
+    return migration->device_state == VFIO_DEVICE_STATE_RUNNING;
+}
+
+bool vfio_device_state_is_precopy(VFIODevice *vbasedev)
+{
+    VFIOMigration *migration = vbasedev->migration;
+
+    return migration->device_state == VFIO_DEVICE_STATE_PRE_COPY;
+}
+
 static bool vfio_devices_all_dirty_tracking(VFIOContainer *container)
 {
     VFIOGroup *group;
@@ -457,8 +471,8 @@ static bool vfio_devices_all_dirty_tracking(VFIOContainer *container)
             }
 
             if (vbasedev->pre_copy_dirty_page_tracking == ON_OFF_AUTO_OFF &&
-                (migration->device_state == VFIO_DEVICE_STATE_RUNNING ||
-                 migration->device_state == VFIO_DEVICE_STATE_PRE_COPY)) {
+                (vfio_device_state_is_running(vbasedev) ||
+                 vfio_device_state_is_precopy(vbasedev))) {
                 return false;
             }
         }
@@ -503,8 +517,8 @@ static bool vfio_devices_all_running_and_mig_active(VFIOContainer *container)
                 return false;
             }
 
-            if (migration->device_state == VFIO_DEVICE_STATE_RUNNING ||
-                migration->device_state == VFIO_DEVICE_STATE_PRE_COPY) {
+            if (vfio_device_state_is_running(vbasedev) ||
+                vfio_device_state_is_precopy(vbasedev)) {
                 continue;
             } else {
                 return false;
diff --git a/hw/vfio/migration.c b/hw/vfio/migration.c
index 8acd182a8b..48f9c23cbe 100644
--- a/hw/vfio/migration.c
+++ b/hw/vfio/migration.c
@@ -411,7 +411,7 @@ static void vfio_state_pending_estimate(void *opaque, uint64_t *must_precopy,
     VFIODevice *vbasedev = opaque;
     VFIOMigration *migration = vbasedev->migration;
 
-    if (migration->device_state != VFIO_DEVICE_STATE_PRE_COPY) {
+    if (!vfio_device_state_is_precopy(vbasedev)) {
         return;
     }
 
@@ -444,7 +444,7 @@ static void vfio_state_pending_exact(void *opaque, uint64_t *must_precopy,
     vfio_query_stop_copy_size(vbasedev, &stop_copy_size);
     *must_precopy += stop_copy_size;
 
-    if (migration->device_state == VFIO_DEVICE_STATE_PRE_COPY) {
+    if (vfio_device_state_is_precopy(vbasedev)) {
         vfio_query_precopy_size(migration);
 
         *must_precopy +=
@@ -459,9 +459,8 @@ static void vfio_state_pending_exact(void *opaque, uint64_t *must_precopy,
 static bool vfio_is_active_iterate(void *opaque)
 {
     VFIODevice *vbasedev = opaque;
-    VFIOMigration *migration = vbasedev->migration;
 
-    return migration->device_state == VFIO_DEVICE_STATE_PRE_COPY;
+    return vfio_device_state_is_precopy(vbasedev);
 }
 
 static int vfio_save_iterate(QEMUFile *f, void *opaque)
@@ -656,7 +655,6 @@ static const SaveVMHandlers savevm_vfio_handlers = {
 static void vfio_vmstate_change(void *opaque, bool running, RunState state)
 {
     VFIODevice *vbasedev = opaque;
-    VFIOMigration *migration = vbasedev->migration;
     enum vfio_device_mig_state new_state;
     int ret;
 
@@ -664,7 +662,7 @@ static void vfio_vmstate_change(void *opaque, bool running, RunState state)
         new_state = VFIO_DEVICE_STATE_RUNNING;
     } else {
         new_state =
-            (migration->device_state == VFIO_DEVICE_STATE_PRE_COPY &&
+            (vfio_device_state_is_precopy(vbasedev) &&
              (state == RUN_STATE_FINISH_MIGRATE || state == RUN_STATE_PAUSED)) ?
                 VFIO_DEVICE_STATE_STOP_COPY :
                 VFIO_DEVICE_STATE_STOP;
-- 
2.26.3



  parent reply	other threads:[~2023-07-16  8:17 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-07-16  8:15 [PATCH for-8.2 0/6] vfio/migration: Add P2P support for VFIO migration Avihai Horon
2023-07-16  8:15 ` [PATCH for-8.2 1/6] vfio/migration: Move from STOP_COPY to STOP in vfio_save_cleanup() Avihai Horon
2023-07-30 16:25   ` Cédric Le Goater
2023-07-31  6:32     ` Avihai Horon
2023-07-31  7:05       ` Cédric Le Goater
2023-07-16  8:15 ` [PATCH for-8.2 2/6] sysemu: Add pre VM state change callback Avihai Horon
2023-07-27 16:23   ` Cédric Le Goater
2023-07-30  6:31     ` Avihai Horon
2023-07-30 16:22       ` Cédric Le Goater
2023-07-16  8:15 ` [PATCH for-8.2 3/6] qdev: Add qdev_add_vm_change_state_handler_full() Avihai Horon
2023-07-16  8:15 ` Avihai Horon [this message]
2023-07-21 11:33   ` [PATCH for-8.2 4/6] vfio/migration: Refactor PRE_COPY and RUNNING state checks Cédric Le Goater
2023-07-16  8:15 ` [PATCH for-8.2 5/6] vfio/migration: Add P2P support for VFIO migration Avihai Horon
2023-07-21 11:48   ` Cédric Le Goater
2023-07-23 10:37     ` Avihai Horon
2023-07-16  8:15 ` [PATCH for-8.2 6/6] vfio/migration: Allow migration of multiple P2P supporting devices Avihai Horon
2023-07-21 12:09   ` Cédric Le Goater
2023-07-23 10:42     ` Avihai Horon
2023-07-18 15:46 ` [PATCH for-8.2 0/6] vfio/migration: Add P2P support for VFIO migration Jason Gunthorpe
2023-07-30  6:50   ` Avihai Horon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230716081541.27900-5-avihaih@nvidia.com \
    --to=avihaih@nvidia.com \
    --cc=alex.williamson@redhat.com \
    --cc=clg@redhat.com \
    --cc=jgg@nvidia.com \
    --cc=joao.m.martins@oracle.com \
    --cc=kwankhede@nvidia.com \
    --cc=maorg@nvidia.com \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=targupta@nvidia.com \
    --cc=yishaih@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).