qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: Stefan Hajnoczi <stefanha@redhat.com>,
	Kevin Wolf <kwolf@redhat.com>, Fam Zheng <fam@euphon.net>,
	qemu-block@nongnu.org, Richard Henderson <rth@twiddle.net>,
	Hanna Reitz <hreitz@redhat.com>,
	Peter Maydell <peter.maydell@linaro.org>
Subject: [PULL for-8.1 4/8] block: Fix pad_request's request restriction
Date: Thu, 27 Jul 2023 16:00:54 -0400	[thread overview]
Message-ID: <20230727200058.1071776-5-stefanha@redhat.com> (raw)
In-Reply-To: <20230727200058.1071776-1-stefanha@redhat.com>

From: Hanna Czenczek <hreitz@redhat.com>

bdrv_pad_request() relies on requests' lengths not to exceed SIZE_MAX,
which bdrv_check_qiov_request() does not guarantee.

bdrv_check_request32() however will guarantee this, and both of
bdrv_pad_request()'s callers (bdrv_co_preadv_part() and
bdrv_co_pwritev_part()) already run it before calling
bdrv_pad_request().  Therefore, bdrv_pad_request() can safely call
bdrv_check_request32() without expecting error, too.

In effect, this patch will not change guest-visible behavior.  It is a
clean-up to tighten a condition to match what is guaranteed by our
callers, and which exists purely to show clearly why the subsequent
assertion (`assert(*bytes <= SIZE_MAX)`) is always true.

Note there is a difference between the interfaces of
bdrv_check_qiov_request() and bdrv_check_request32(): The former takes
an errp, the latter does not, so we can no longer just pass
&error_abort.  Instead, we need to check the returned value.  While we
do expect success (because the callers have already run this function),
an assert(ret == 0) is not much simpler than just to return an error if
it occurs, so let us handle errors by returning them up the stack now.

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-id: 20230714085938.202730-1-hreitz@redhat.com
Fixes: 18743311b829cafc1737a5f20bc3248d5f91ee2a
       ("block: Collapse padded I/O vecs exceeding IOV_MAX")
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 block/io.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/block/io.c b/block/io.c
index e8293d6b26..055fcf7438 100644
--- a/block/io.c
+++ b/block/io.c
@@ -1710,7 +1710,11 @@ static int bdrv_pad_request(BlockDriverState *bs,
     int sliced_niov;
     size_t sliced_head, sliced_tail;
 
-    bdrv_check_qiov_request(*offset, *bytes, *qiov, *qiov_offset, &error_abort);
+    /* Should have been checked by the caller already */
+    ret = bdrv_check_request32(*offset, *bytes, *qiov, *qiov_offset);
+    if (ret < 0) {
+        return ret;
+    }
 
     if (!bdrv_init_padding(bs, *offset, *bytes, write, pad)) {
         if (padded) {
@@ -1723,7 +1727,7 @@ static int bdrv_pad_request(BlockDriverState *bs,
                                   &sliced_head, &sliced_tail,
                                   &sliced_niov);
 
-    /* Guaranteed by bdrv_check_qiov_request() */
+    /* Guaranteed by bdrv_check_request32() */
     assert(*bytes <= SIZE_MAX);
     ret = bdrv_create_padded_qiov(bs, pad, sliced_iov, sliced_niov,
                                   sliced_head, *bytes);
-- 
2.41.0



  parent reply	other threads:[~2023-07-27 20:15 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-07-27 20:00 [PULL for-8.1 0/8] Block patches Stefan Hajnoczi
2023-07-27 20:00 ` [PULL for-8.1 1/8] block/blkio: enable the completion eventfd Stefan Hajnoczi
2023-07-27 20:00 ` [PULL for-8.1 2/8] block/blkio: do not use open flags in qemu_open() Stefan Hajnoczi
2023-07-27 20:00 ` [PULL for-8.1 3/8] block/file-posix: fix g_file_get_contents return path Stefan Hajnoczi
2023-07-27 20:00 ` Stefan Hajnoczi [this message]
2023-07-27 20:00 ` [PULL for-8.1 5/8] block/blkio: move blkio_connect() in the drivers functions Stefan Hajnoczi
2023-07-27 20:00 ` [PULL for-8.1 6/8] block/blkio: retry blkio_connect() if it fails using `fd` Stefan Hajnoczi
2023-07-27 20:00 ` [PULL for-8.1 7/8] block/blkio: fall back on using `path` when `fd` setting fails Stefan Hajnoczi
2023-07-27 20:00 ` [PULL for-8.1 8/8] block/blkio: use blkio_set_int("fd") to check fd support Stefan Hajnoczi
2023-07-28 12:56 ` [PULL for-8.1 0/8] Block patches Richard Henderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230727200058.1071776-5-stefanha@redhat.com \
    --to=stefanha@redhat.com \
    --cc=fam@euphon.net \
    --cc=hreitz@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=rth@twiddle.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).