From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: jniethe5@gmail.com, qemu-ppc@nongnu.org, bgray@linux.ibm.com
Subject: [PATCH 2/7] tcg/ppc: Use PADDI in tcg_out_movi
Date: Fri, 4 Aug 2023 14:33:50 -0700 [thread overview]
Message-ID: <20230804213355.294443-3-richard.henderson@linaro.org> (raw)
In-Reply-To: <20230804213355.294443-1-richard.henderson@linaro.org>
PADDI can load 34-bit immediates and 34-bit pc-relative addresses.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
tcg/ppc/tcg-target.c.inc | 47 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 47 insertions(+)
diff --git a/tcg/ppc/tcg-target.c.inc b/tcg/ppc/tcg-target.c.inc
index 642d0fd128..7fa2a2500b 100644
--- a/tcg/ppc/tcg-target.c.inc
+++ b/tcg/ppc/tcg-target.c.inc
@@ -707,6 +707,33 @@ static bool patch_reloc(tcg_insn_unit *code_ptr, int type,
return true;
}
+/* Ensure that the prefixed instruction does not cross a 64-byte boundary. */
+static bool tcg_out_need_prefix_align(TCGContext *s)
+{
+ return ((uintptr_t)s->code_ptr & 0x3f) == 0x3c;
+}
+
+static void tcg_out_prefix_align(TCGContext *s)
+{
+ if (tcg_out_need_prefix_align(s)) {
+ tcg_out32(s, NOP);
+ }
+}
+
+/* Output Type 10 Prefix - Modified Load/Store Form (MLS:D) */
+static void tcg_out_mls_d(TCGContext *s, tcg_insn_unit opc, unsigned rt,
+ unsigned ra, tcg_target_long imm, bool r)
+{
+ tcg_insn_unit p, i;
+
+ p = OPCD(1) | (2 << 24) | (r << 20) | ((imm >> 16) & 0x3ffff);
+ i = opc | TAI(rt, ra, imm);
+
+ tcg_out_prefix_align(s);
+ tcg_out32(s, p);
+ tcg_out32(s, i);
+}
+
static void tcg_out_mem_long(TCGContext *s, int opi, int opx, TCGReg rt,
TCGReg base, tcg_target_long offset);
@@ -992,6 +1019,26 @@ static void tcg_out_movi_int(TCGContext *s, TCGType type, TCGReg ret,
return;
}
+ /*
+ * Load values up to 34 bits, and pc-relative addresses,
+ * with one prefixed insn.
+ */
+ if (have_isa_3_10) {
+ if (arg == sextract64(arg, 0, 34)) {
+ /* pli ret,value = paddi ret,0,value,0 */
+ tcg_out_mls_d(s, ADDI, ret, 0, arg, 0);
+ return;
+ }
+
+ tmp = tcg_out_need_prefix_align(s) * 4;
+ tmp = tcg_pcrel_diff(s, (void *)arg) - tmp;
+ if (tmp == sextract64(tmp, 0, 34)) {
+ /* pla ret,value = paddi ret,0,value,1 */
+ tcg_out_mls_d(s, ADDI, ret, 0, tmp, 1);
+ return;
+ }
+ }
+
/* Load 32-bit immediates with two insns. Note that we've already
eliminated bare ADDIS, so we know both insns are required. */
if (TCG_TARGET_REG_BITS == 32 || arg == (int32_t)arg) {
--
2.34.1
next prev parent reply other threads:[~2023-08-04 21:35 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-04 21:33 [PATCH for-8.2 0/7] tcg/ppc: Support power10 prefixed instructions Richard Henderson
2023-08-04 21:33 ` [PATCH 1/7] tcg/ppc: Untabify tcg-target.c.inc Richard Henderson
2023-08-04 21:33 ` Richard Henderson [this message]
2023-08-07 3:53 ` [PATCH 2/7] tcg/ppc: Use PADDI in tcg_out_movi Jordan Niethe
2023-08-07 21:26 ` Richard Henderson
2023-08-04 21:33 ` [PATCH 3/7] tcg/ppc: Use prefixed instructions in tcg_out_mem_long Richard Henderson
2023-08-07 3:51 ` Jordan Niethe
2023-08-04 21:33 ` [PATCH 4/7] tcg/ppc: Use PLD in tcg_out_movi for constant pool Richard Henderson
2023-08-04 21:33 ` [PATCH 5/7] tcg/ppc: Use prefixed instructions in tcg_out_dupi_vec Richard Henderson
2023-08-04 21:33 ` [PATCH 6/7] tcg/ppc: Disable USE_REG_TB for Power v3.1 Richard Henderson
2023-08-06 11:58 ` Nicholas Piggin
2023-08-06 13:45 ` Richard Henderson
2023-08-04 21:33 ` [PATCH 7/7] tcg/ppc: Use prefixed instructions for tcg_out_goto_tb Richard Henderson
2023-08-06 12:55 ` Nicholas Piggin
2023-08-06 14:13 ` Richard Henderson
2023-08-07 1:51 ` Nicholas Piggin
2023-08-07 7:29 ` Nicholas Piggin
2023-08-07 9:38 ` Nicholas Piggin
2023-08-07 4:08 ` Jordan Niethe
2023-08-06 11:55 ` [PATCH for-8.2 0/7] tcg/ppc: Support power10 prefixed instructions Nicholas Piggin
2023-08-06 14:22 ` Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230804213355.294443-3-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=bgray@linux.ibm.com \
--cc=jniethe5@gmail.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).