From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: "Philippe Mathieu-Daudé" <philmd@linaro.org>
Subject: [PATCH v9 02/24] accel/tcg: Issue wider aligned i/o in do_{ld, st}_mmio_*
Date: Fri, 4 Aug 2023 15:00:10 -0700 [thread overview]
Message-ID: <20230804220032.295411-3-richard.henderson@linaro.org> (raw)
In-Reply-To: <20230804220032.295411-1-richard.henderson@linaro.org>
If the address and size are aligned, send larger chunks
to the memory subsystem. This will be required to make
more use of these helpers.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
accel/tcg/cputlb.c | 76 +++++++++++++++++++++++++++++++++++++++++-----
1 file changed, 69 insertions(+), 7 deletions(-)
diff --git a/accel/tcg/cputlb.c b/accel/tcg/cputlb.c
index 23386ecfde..a308cb7534 100644
--- a/accel/tcg/cputlb.c
+++ b/accel/tcg/cputlb.c
@@ -2081,10 +2081,40 @@ static uint64_t do_ld_mmio_beN(CPUArchState *env, CPUTLBEntryFull *full,
uint64_t ret_be, vaddr addr, int size,
int mmu_idx, MMUAccessType type, uintptr_t ra)
{
- for (int i = 0; i < size; i++) {
- uint8_t x = io_readx(env, full, mmu_idx, addr + i, ra, type, MO_UB);
- ret_be = (ret_be << 8) | x;
- }
+ uint64_t t;
+
+ tcg_debug_assert(size > 0 && size <= 8);
+ do {
+ /* Read aligned pieces up to 8 bytes. */
+ switch ((size | (int)addr) & 7) {
+ case 1:
+ case 3:
+ case 5:
+ case 7:
+ t = io_readx(env, full, mmu_idx, addr, ra, type, MO_UB);
+ ret_be = (ret_be << 8) | t;
+ size -= 1;
+ addr += 1;
+ break;
+ case 2:
+ case 6:
+ t = io_readx(env, full, mmu_idx, addr, ra, type, MO_BEUW);
+ ret_be = (ret_be << 16) | t;
+ size -= 2;
+ addr += 2;
+ break;
+ case 4:
+ t = io_readx(env, full, mmu_idx, addr, ra, type, MO_BEUL);
+ ret_be = (ret_be << 32) | t;
+ size -= 4;
+ addr += 4;
+ break;
+ case 0:
+ return io_readx(env, full, mmu_idx, addr, ra, type, MO_BEUQ);
+ default:
+ qemu_build_not_reached();
+ }
+ } while (size);
return ret_be;
}
@@ -2680,9 +2710,41 @@ static uint64_t do_st_mmio_leN(CPUArchState *env, CPUTLBEntryFull *full,
uint64_t val_le, vaddr addr, int size,
int mmu_idx, uintptr_t ra)
{
- for (int i = 0; i < size; i++, val_le >>= 8) {
- io_writex(env, full, mmu_idx, val_le, addr + i, ra, MO_UB);
- }
+ tcg_debug_assert(size > 0 && size <= 8);
+
+ do {
+ /* Store aligned pieces up to 8 bytes. */
+ switch ((size | (int)addr) & 7) {
+ case 1:
+ case 3:
+ case 5:
+ case 7:
+ io_writex(env, full, mmu_idx, val_le, addr, ra, MO_UB);
+ val_le >>= 8;
+ size -= 1;
+ addr += 1;
+ break;
+ case 2:
+ case 6:
+ io_writex(env, full, mmu_idx, val_le, addr, ra, MO_LEUW);
+ val_le >>= 16;
+ size -= 2;
+ addr += 2;
+ break;
+ case 4:
+ io_writex(env, full, mmu_idx, val_le, addr, ra, MO_LEUL);
+ val_le >>= 32;
+ size -= 4;
+ addr += 4;
+ break;
+ case 0:
+ io_writex(env, full, mmu_idx, val_le, addr, ra, MO_LEUQ);
+ return 0;
+ default:
+ qemu_build_not_reached();
+ }
+ } while (size);
+
return val_le;
}
--
2.34.1
next prev parent reply other threads:[~2023-08-04 22:03 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-04 22:00 [PATCH v9 for-8.1 00/24] linux-user + tcg patch queue Richard Henderson
2023-08-04 22:00 ` [PATCH v9 01/24] accel/tcg: Adjust parameters and locking with do_{ld, st}_mmio_* Richard Henderson
2023-08-04 22:00 ` Richard Henderson [this message]
2023-08-04 22:00 ` [PATCH v9 03/24] accel/tcg: Do not issue misaligned i/o Richard Henderson
2023-08-04 22:00 ` [PATCH v9 04/24] gdbstub: use 0 ("any process") on packets with no PID Richard Henderson
2023-08-04 22:00 ` [PATCH v9 05/24] linux-user: Unset MAP_FIXED_NOREPLACE for host Richard Henderson
2023-08-04 22:00 ` [PATCH v9 06/24] linux-user: Fix MAP_FIXED_NOREPLACE on old kernels Richard Henderson
2023-08-04 22:00 ` [PATCH v9 07/24] linux-user: Do not call get_errno() in do_brk() Richard Henderson
2023-08-04 22:00 ` [PATCH v9 08/24] linux-user: Use MAP_FIXED_NOREPLACE for do_brk() Richard Henderson
2023-08-04 22:00 ` [PATCH v9 09/24] linux-user: Do nothing if too small brk is specified Richard Henderson
2023-08-04 22:00 ` [PATCH v9 10/24] linux-user: Do not align brk with host page size Richard Henderson
2023-08-04 22:00 ` [PATCH v9 11/24] linux-user: Remove last_brk Richard Henderson
2023-08-04 22:00 ` [PATCH v9 12/24] bsd-user: " Richard Henderson
2023-08-04 22:00 ` [PATCH v9 13/24] linux-user: Adjust task_unmapped_base for reserved_va Richard Henderson
2023-08-04 22:00 ` [PATCH v9 14/24] linux-user: Define TASK_UNMAPPED_BASE in $guest/target_mman.h Richard Henderson
2023-08-04 22:00 ` [PATCH v9 15/24] linux-user: Define ELF_ET_DYN_BASE " Richard Henderson
2023-08-04 22:00 ` [PATCH v9 16/24] linux-user: Use MAP_FIXED_NOREPLACE for initial image mmap Richard Henderson
2023-08-04 22:00 ` [PATCH v9 17/24] linux-user: Use elf_et_dyn_base for ET_DYN with interpreter Richard Henderson
2023-08-04 22:00 ` [PATCH v9 18/24] linux-user: Adjust initial brk when interpreter is close to executable Richard Henderson
2023-08-04 22:00 ` [PATCH v9 19/24] linux-user: Properly set image_info.brk in flatload Richard Henderson
2023-08-04 22:00 ` [PATCH v9 20/24] linux-user: Do not adjust image mapping for host page size Richard Henderson
2023-08-04 22:00 ` [PATCH v9 21/24] linux-user: Do not adjust zero_bss " Richard Henderson
2023-08-04 22:00 ` [PATCH v9 22/24] linux-user: Use zero_bss for PT_LOAD with no file contents too Richard Henderson
2023-08-04 22:00 ` [PATCH v9 23/24] accel/tcg: Call save_iotlb_data from io_readx as well Richard Henderson
2023-08-04 22:00 ` [PATCH v9 24/24] linux-user/elfload: Set V in ELF_HWCAP for RISC-V Richard Henderson
2023-08-05 13:28 ` [PATCH v9 for-8.1 00/24] linux-user + tcg patch queue Michael Tokarev
2023-08-05 13:51 ` Michael Tokarev
2023-08-05 14:01 ` Richard Henderson
2023-08-05 14:05 ` Michael Tokarev
2023-08-05 14:10 ` Michael Tokarev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230804220032.295411-3-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=philmd@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).