From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PULL 00/24] tcg + linux-user queue for 8.1-rc3
Date: Sat, 5 Aug 2023 20:36:51 -0700 [thread overview]
Message-ID: <20230806033715.244648-1-richard.henderson@linaro.org> (raw)
The following changes since commit 6db03ccc7f4ca33c99debaac290066f4500a2dfb:
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging (2023-08-04 14:47:00 -0700)
are available in the Git repository at:
https://gitlab.com/rth7680/qemu.git tags/pull-tcg-20230805
for you to fetch changes up to 843246699425adfb6b81f927c16c9c6249b51e1d:
linux-user/elfload: Set V in ELF_HWCAP for RISC-V (2023-08-05 18:17:20 +0000)
----------------------------------------------------------------
accel/tcg: Do not issue misaligned i/o
accel/tcg: Call save_iotlb_data from io_readx
gdbstub: use 0 ("any process") on packets with no PID
linux-user: Fixes for MAP_FIXED_NOREPLACE
linux-user: Fixes for brk
linux-user: Adjust task_unmapped_base for reserved_va
linux-user: Use ELF_ET_DYN_BASE for ET_DYN with interpreter
linux-user: Remove host != guest page size workarounds in brk and image load
linux-user: Set V in ELF_HWCAP for RISC-V
*-user: Remove last_brk as unused
----------------------------------------------------------------
Akihiko Odaki (6):
linux-user: Unset MAP_FIXED_NOREPLACE for host
linux-user: Fix MAP_FIXED_NOREPLACE on old kernels
linux-user: Do not call get_errno() in do_brk()
linux-user: Use MAP_FIXED_NOREPLACE for do_brk()
linux-user: Do nothing if too small brk is specified
linux-user: Do not align brk with host page size
Helge Deller (1):
linux-user: Adjust initial brk when interpreter is close to executable
Matheus Tavares Bernardino (1):
gdbstub: use 0 ("any process") on packets with no PID
Mikhail Tyutin (1):
accel/tcg: Call save_iotlb_data from io_readx as well.
Nathan Egge (1):
linux-user/elfload: Set V in ELF_HWCAP for RISC-V
Richard Henderson (14):
accel/tcg: Adjust parameters and locking with do_{ld,st}_mmio_*
accel/tcg: Issue wider aligned i/o in do_{ld,st}_mmio_*
accel/tcg: Do not issue misaligned i/o
linux-user: Remove last_brk
bsd-user: Remove last_brk
linux-user: Adjust task_unmapped_base for reserved_va
linux-user: Define TASK_UNMAPPED_BASE in $guest/target_mman.h
linux-user: Define ELF_ET_DYN_BASE in $guest/target_mman.h
linux-user: Use MAP_FIXED_NOREPLACE for initial image mmap
linux-user: Use elf_et_dyn_base for ET_DYN with interpreter
linux-user: Properly set image_info.brk in flatload
linux-user: Do not adjust image mapping for host page size
linux-user: Do not adjust zero_bss for host page size
linux-user: Use zero_bss for PT_LOAD with no file contents too
bsd-user/qemu.h | 1 -
linux-user/aarch64/target_mman.h | 13 ++
linux-user/alpha/target_mman.h | 11 ++
linux-user/arm/target_mman.h | 11 ++
linux-user/cris/target_mman.h | 12 ++
linux-user/hexagon/target_mman.h | 13 ++
linux-user/hppa/target_mman.h | 6 +
linux-user/i386/target_mman.h | 16 ++
linux-user/loongarch64/target_mman.h | 11 ++
linux-user/m68k/target_mman.h | 5 +
linux-user/microblaze/target_mman.h | 11 ++
linux-user/mips/target_mman.h | 10 ++
linux-user/nios2/target_mman.h | 10 ++
linux-user/openrisc/target_mman.h | 10 ++
linux-user/ppc/target_mman.h | 20 +++
linux-user/qemu.h | 2 -
linux-user/riscv/target_mman.h | 10 ++
linux-user/s390x/target_mman.h | 20 +++
linux-user/sh4/target_mman.h | 7 +
linux-user/sparc/target_mman.h | 25 +++
linux-user/user-mmap.h | 6 +-
linux-user/x86_64/target_mman.h | 15 ++
linux-user/xtensa/target_mman.h | 10 ++
accel/tcg/cputlb.c | 289 +++++++++++++++++++++++------------
bsd-user/mmap.c | 2 -
gdbstub/gdbstub.c | 2 +-
linux-user/elfload.c | 184 ++++++++++------------
linux-user/flatload.c | 2 +-
linux-user/main.c | 45 +++++-
linux-user/mmap.c | 68 +++++----
linux-user/syscall.c | 69 ++-------
31 files changed, 622 insertions(+), 294 deletions(-)
next reply other threads:[~2023-08-06 3:39 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-06 3:36 Richard Henderson [this message]
2023-08-06 3:36 ` [PULL 01/24] accel/tcg: Adjust parameters and locking with do_{ld, st}_mmio_* Richard Henderson
2023-08-06 3:36 ` [PULL 02/24] accel/tcg: Issue wider aligned i/o in do_{ld,st}_mmio_* Richard Henderson
2023-08-06 3:36 ` [PULL 03/24] accel/tcg: Do not issue misaligned i/o Richard Henderson
2023-08-06 3:36 ` [PULL 04/24] gdbstub: use 0 ("any process") on packets with no PID Richard Henderson
2023-08-06 3:36 ` [PULL 05/24] linux-user: Unset MAP_FIXED_NOREPLACE for host Richard Henderson
2023-08-06 3:36 ` [PULL 06/24] linux-user: Fix MAP_FIXED_NOREPLACE on old kernels Richard Henderson
2023-08-06 3:36 ` [PULL 07/24] linux-user: Do not call get_errno() in do_brk() Richard Henderson
2023-08-06 6:53 ` Michael Tokarev
2023-08-07 1:23 ` Richard Henderson
2023-08-06 3:36 ` [PULL 08/24] linux-user: Use MAP_FIXED_NOREPLACE for do_brk() Richard Henderson
2023-08-06 3:37 ` [PULL 09/24] linux-user: Do nothing if too small brk is specified Richard Henderson
2023-08-06 3:37 ` [PULL 10/24] linux-user: Do not align brk with host page size Richard Henderson
2023-08-06 3:37 ` [PULL 11/24] linux-user: Remove last_brk Richard Henderson
2023-08-06 3:37 ` [PULL 12/24] bsd-user: " Richard Henderson
2023-08-06 3:37 ` [PULL 13/24] linux-user: Adjust task_unmapped_base for reserved_va Richard Henderson
2023-08-06 3:37 ` [PULL 14/24] linux-user: Define TASK_UNMAPPED_BASE in $guest/target_mman.h Richard Henderson
2023-08-06 3:37 ` [PULL 15/24] linux-user: Define ELF_ET_DYN_BASE " Richard Henderson
2023-08-06 3:37 ` [PULL 16/24] linux-user: Use MAP_FIXED_NOREPLACE for initial image mmap Richard Henderson
2023-08-06 3:37 ` [PULL 17/24] linux-user: Use elf_et_dyn_base for ET_DYN with interpreter Richard Henderson
2023-08-06 3:37 ` [PULL 18/24] linux-user: Adjust initial brk when interpreter is close to executable Richard Henderson
2023-08-06 3:37 ` [PULL 19/24] linux-user: Properly set image_info.brk in flatload Richard Henderson
2023-08-06 3:37 ` [PULL 20/24] linux-user: Do not adjust image mapping for host page size Richard Henderson
2023-08-06 3:37 ` [PULL 21/24] linux-user: Do not adjust zero_bss " Richard Henderson
2023-08-06 3:37 ` [PULL 22/24] linux-user: Use zero_bss for PT_LOAD with no file contents too Richard Henderson
2023-08-06 3:37 ` [PULL 23/24] accel/tcg: Call save_iotlb_data from io_readx as well Richard Henderson
2023-08-06 3:37 ` [PULL 24/24] linux-user/elfload: Set V in ELF_HWCAP for RISC-V Richard Henderson
2023-08-07 1:22 ` [PULL 00/24] tcg + linux-user queue for 8.1-rc3 Richard Henderson
2023-08-23 13:04 ` Failing avocado tests in CI (was: Re: [PULL 00/24] tcg + linux-user queue for 8.1-rc3) Thomas Huth
2023-08-23 16:27 ` Richard Henderson
2023-08-24 15:31 ` Alex Bennée
2023-08-24 16:23 ` Michael Tokarev
2023-08-25 11:05 ` Philippe Mathieu-Daudé
2023-08-24 18:31 ` Richard Henderson
2023-08-25 11:36 ` Philippe Mathieu-Daudé
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230806033715.244648-1-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).