From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: Helge Deller <deller@gmx.de>, Akihiko Odaki <akihiko.odaki@daynix.com>
Subject: [PULL 13/24] linux-user: Adjust task_unmapped_base for reserved_va
Date: Sat, 5 Aug 2023 20:37:04 -0700 [thread overview]
Message-ID: <20230806033715.244648-14-richard.henderson@linaro.org> (raw)
In-Reply-To: <20230806033715.244648-1-richard.henderson@linaro.org>
Ensure that the chosen values for mmap_next_start and
task_unmapped_base are within the guest address space.
Tested-by: Helge Deller <deller@gmx.de>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
linux-user/user-mmap.h | 18 +++++++++++++++++-
linux-user/main.c | 28 ++++++++++++++++++++++++++++
linux-user/mmap.c | 18 +++---------------
3 files changed, 48 insertions(+), 16 deletions(-)
diff --git a/linux-user/user-mmap.h b/linux-user/user-mmap.h
index 7265c2c116..fd456e024e 100644
--- a/linux-user/user-mmap.h
+++ b/linux-user/user-mmap.h
@@ -18,6 +18,23 @@
#ifndef LINUX_USER_USER_MMAP_H
#define LINUX_USER_USER_MMAP_H
+#if HOST_LONG_BITS == 64 && TARGET_ABI_BITS == 64
+#ifdef TARGET_AARCH64
+# define TASK_UNMAPPED_BASE 0x5500000000
+#else
+# define TASK_UNMAPPED_BASE (1ul << 38)
+#endif
+#else
+#ifdef TARGET_HPPA
+# define TASK_UNMAPPED_BASE 0xfa000000
+#else
+# define TASK_UNMAPPED_BASE 0x40000000
+#endif
+#endif
+
+extern abi_ulong task_unmapped_base;
+extern abi_ulong mmap_next_start;
+
int target_mprotect(abi_ulong start, abi_ulong len, int prot);
abi_long target_mmap(abi_ulong start, abi_ulong len, int prot,
int flags, int fd, off_t offset);
@@ -26,7 +43,6 @@ abi_long target_mremap(abi_ulong old_addr, abi_ulong old_size,
abi_ulong new_size, unsigned long flags,
abi_ulong new_addr);
abi_long target_madvise(abi_ulong start, abi_ulong len_in, int advice);
-extern abi_ulong mmap_next_start;
abi_ulong mmap_find_vma(abi_ulong, abi_ulong, abi_ulong);
void mmap_fork_start(void);
void mmap_fork_end(int child);
diff --git a/linux-user/main.c b/linux-user/main.c
index dba67ffa36..7ba7039988 100644
--- a/linux-user/main.c
+++ b/linux-user/main.c
@@ -821,6 +821,34 @@ int main(int argc, char **argv, char **envp)
reserved_va = max_reserved_va;
}
+ /*
+ * Temporarily disable
+ * "comparison is always false due to limited range of data type"
+ * due to comparison between (possible) uint64_t and uintptr_t.
+ */
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wtype-limits"
+
+ /*
+ * Select an initial value for task_unmapped_base that is in range.
+ */
+ if (reserved_va) {
+ if (TASK_UNMAPPED_BASE < reserved_va) {
+ task_unmapped_base = TASK_UNMAPPED_BASE;
+ } else {
+ /* The most common default formula is TASK_SIZE / 3. */
+ task_unmapped_base = TARGET_PAGE_ALIGN(reserved_va / 3);
+ }
+ } else if (TASK_UNMAPPED_BASE < UINTPTR_MAX) {
+ task_unmapped_base = TASK_UNMAPPED_BASE;
+ } else {
+ /* 32-bit host: pick something medium size. */
+ task_unmapped_base = 0x10000000;
+ }
+ mmap_next_start = task_unmapped_base;
+
+#pragma GCC diagnostic pop
+
{
Error *err = NULL;
if (seed_optarg != NULL) {
diff --git a/linux-user/mmap.c b/linux-user/mmap.c
index eb04fab8ab..84436d45c8 100644
--- a/linux-user/mmap.c
+++ b/linux-user/mmap.c
@@ -299,20 +299,8 @@ static bool mmap_frag(abi_ulong real_start, abi_ulong start, abi_ulong last,
return true;
}
-#if HOST_LONG_BITS == 64 && TARGET_ABI_BITS == 64
-#ifdef TARGET_AARCH64
-# define TASK_UNMAPPED_BASE 0x5500000000
-#else
-# define TASK_UNMAPPED_BASE (1ul << 38)
-#endif
-#else
-#ifdef TARGET_HPPA
-# define TASK_UNMAPPED_BASE 0xfa000000
-#else
-# define TASK_UNMAPPED_BASE 0x40000000
-#endif
-#endif
-abi_ulong mmap_next_start = TASK_UNMAPPED_BASE;
+abi_ulong task_unmapped_base;
+abi_ulong mmap_next_start;
/*
* Subroutine of mmap_find_vma, used when we have pre-allocated
@@ -391,7 +379,7 @@ abi_ulong mmap_find_vma(abi_ulong start, abi_ulong size, abi_ulong align)
if ((addr & (align - 1)) == 0) {
/* Success. */
- if (start == mmap_next_start && addr >= TASK_UNMAPPED_BASE) {
+ if (start == mmap_next_start && addr >= task_unmapped_base) {
mmap_next_start = addr + size;
}
return addr;
--
2.34.1
next prev parent reply other threads:[~2023-08-06 3:39 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-06 3:36 [PULL 00/24] tcg + linux-user queue for 8.1-rc3 Richard Henderson
2023-08-06 3:36 ` [PULL 01/24] accel/tcg: Adjust parameters and locking with do_{ld, st}_mmio_* Richard Henderson
2023-08-06 3:36 ` [PULL 02/24] accel/tcg: Issue wider aligned i/o in do_{ld,st}_mmio_* Richard Henderson
2023-08-06 3:36 ` [PULL 03/24] accel/tcg: Do not issue misaligned i/o Richard Henderson
2023-08-06 3:36 ` [PULL 04/24] gdbstub: use 0 ("any process") on packets with no PID Richard Henderson
2023-08-06 3:36 ` [PULL 05/24] linux-user: Unset MAP_FIXED_NOREPLACE for host Richard Henderson
2023-08-06 3:36 ` [PULL 06/24] linux-user: Fix MAP_FIXED_NOREPLACE on old kernels Richard Henderson
2023-08-06 3:36 ` [PULL 07/24] linux-user: Do not call get_errno() in do_brk() Richard Henderson
2023-08-06 6:53 ` Michael Tokarev
2023-08-07 1:23 ` Richard Henderson
2023-08-06 3:36 ` [PULL 08/24] linux-user: Use MAP_FIXED_NOREPLACE for do_brk() Richard Henderson
2023-08-06 3:37 ` [PULL 09/24] linux-user: Do nothing if too small brk is specified Richard Henderson
2023-08-06 3:37 ` [PULL 10/24] linux-user: Do not align brk with host page size Richard Henderson
2023-08-06 3:37 ` [PULL 11/24] linux-user: Remove last_brk Richard Henderson
2023-08-06 3:37 ` [PULL 12/24] bsd-user: " Richard Henderson
2023-08-06 3:37 ` Richard Henderson [this message]
2023-08-06 3:37 ` [PULL 14/24] linux-user: Define TASK_UNMAPPED_BASE in $guest/target_mman.h Richard Henderson
2023-08-06 3:37 ` [PULL 15/24] linux-user: Define ELF_ET_DYN_BASE " Richard Henderson
2023-08-06 3:37 ` [PULL 16/24] linux-user: Use MAP_FIXED_NOREPLACE for initial image mmap Richard Henderson
2023-08-06 3:37 ` [PULL 17/24] linux-user: Use elf_et_dyn_base for ET_DYN with interpreter Richard Henderson
2023-08-06 3:37 ` [PULL 18/24] linux-user: Adjust initial brk when interpreter is close to executable Richard Henderson
2023-08-06 3:37 ` [PULL 19/24] linux-user: Properly set image_info.brk in flatload Richard Henderson
2023-08-06 3:37 ` [PULL 20/24] linux-user: Do not adjust image mapping for host page size Richard Henderson
2023-08-06 3:37 ` [PULL 21/24] linux-user: Do not adjust zero_bss " Richard Henderson
2023-08-06 3:37 ` [PULL 22/24] linux-user: Use zero_bss for PT_LOAD with no file contents too Richard Henderson
2023-08-06 3:37 ` [PULL 23/24] accel/tcg: Call save_iotlb_data from io_readx as well Richard Henderson
2023-08-06 3:37 ` [PULL 24/24] linux-user/elfload: Set V in ELF_HWCAP for RISC-V Richard Henderson
2023-08-07 1:22 ` [PULL 00/24] tcg + linux-user queue for 8.1-rc3 Richard Henderson
2023-08-23 13:04 ` Failing avocado tests in CI (was: Re: [PULL 00/24] tcg + linux-user queue for 8.1-rc3) Thomas Huth
2023-08-23 16:27 ` Richard Henderson
2023-08-24 15:31 ` Alex Bennée
2023-08-24 16:23 ` Michael Tokarev
2023-08-25 11:05 ` Philippe Mathieu-Daudé
2023-08-24 18:31 ` Richard Henderson
2023-08-25 11:36 ` Philippe Mathieu-Daudé
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230806033715.244648-14-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=akihiko.odaki@daynix.com \
--cc=deller@gmx.de \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).