From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: pbonzini@redhat.com, philmd@linaro.org, laurent@vivier.eu,
deller@gmx.de, Akihiko Odaki <akihiko.odaki@daynix.com>
Subject: [PATCH for-8.1 v10 06/14] linux-user: Adjust initial brk when interpreter is close to executable
Date: Mon, 7 Aug 2023 09:36:57 -0700 [thread overview]
Message-ID: <20230807163705.9848-7-richard.henderson@linaro.org> (raw)
In-Reply-To: <20230807163705.9848-1-richard.henderson@linaro.org>
From: Helge Deller <deller@gmx.de>
While we attempt to load a ET_DYN executable far away from
TASK_UNMAPPED_BASE, we are not completely in control of the
address space layout. If the interpreter lands close to
the executable, leaving insufficient heap space, move brk.
Tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>
[rth: Re-order after ELF_ET_DYN_BASE patch so that we do not
"temporarily break" tsan, and also to minimize the changes required.
Remove image_info.reserve_brk as unused.]
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
linux-user/qemu.h | 1 -
linux-user/elfload.c | 51 +++++++++++++-------------------------------
2 files changed, 15 insertions(+), 37 deletions(-)
diff --git a/linux-user/qemu.h b/linux-user/qemu.h
index 2046a23037..4f8b55e2fb 100644
--- a/linux-user/qemu.h
+++ b/linux-user/qemu.h
@@ -30,7 +30,6 @@ struct image_info {
abi_ulong start_data;
abi_ulong end_data;
abi_ulong brk;
- abi_ulong reserve_brk;
abi_ulong start_mmap;
abi_ulong start_stack;
abi_ulong stack_limit;
diff --git a/linux-user/elfload.c b/linux-user/elfload.c
index d1b278d799..3553a3eaef 100644
--- a/linux-user/elfload.c
+++ b/linux-user/elfload.c
@@ -3110,27 +3110,6 @@ static void load_elf_image(const char *image_name, int image_fd,
load_addr = loaddr;
if (pinterp_name != NULL) {
- /*
- * This is the main executable.
- *
- * Reserve extra space for brk.
- * We hold on to this space while placing the interpreter
- * and the stack, lest they be placed immediately after
- * the data segment and block allocation from the brk.
- *
- * 16MB is chosen as "large enough" without being so large as
- * to allow the result to not fit with a 32-bit guest on a
- * 32-bit host. However some 64 bit guests (e.g. s390x)
- * attempt to place their heap further ahead and currently
- * nothing stops them smashing into QEMUs address space.
- */
-#if TARGET_LONG_BITS == 64
- info->reserve_brk = 32 * MiB;
-#else
- info->reserve_brk = 16 * MiB;
-#endif
- hiaddr += info->reserve_brk;
-
if (ehdr->e_type == ET_EXEC) {
/*
* Make sure that the low address does not conflict with
@@ -3221,7 +3200,8 @@ static void load_elf_image(const char *image_name, int image_fd,
info->end_code = 0;
info->start_data = -1;
info->end_data = 0;
- info->brk = 0;
+ /* Usual start for brk is after all sections of the main executable. */
+ info->brk = TARGET_PAGE_ALIGN(hiaddr);
info->elf_flags = ehdr->e_flags;
prot_exec = PROT_EXEC;
@@ -3315,9 +3295,6 @@ static void load_elf_image(const char *image_name, int image_fd,
info->end_data = vaddr_ef;
}
}
- if (vaddr_em > info->brk) {
- info->brk = vaddr_em;
- }
#ifdef TARGET_MIPS
} else if (eppnt->p_type == PT_MIPS_ABIFLAGS) {
Mips_elf_abiflags_v0 abiflags;
@@ -3646,6 +3623,19 @@ int load_elf_binary(struct linux_binprm *bprm, struct image_info *info)
if (elf_interpreter) {
load_elf_interp(elf_interpreter, &interp_info, bprm->buf);
+ /*
+ * While unusual because of ELF_ET_DYN_BASE, if we are unlucky
+ * with the mappings the interpreter can be loaded above but
+ * near the main executable, which can leave very little room
+ * for the heap.
+ * If the current brk has less than 16MB, use the end of the
+ * interpreter.
+ */
+ if (interp_info.brk > info->brk &&
+ interp_info.load_bias - info->brk < 16 * MiB) {
+ info->brk = interp_info.brk;
+ }
+
/* If the program interpreter is one of these two, then assume
an iBCS2 image. Otherwise assume a native linux image. */
@@ -3699,17 +3689,6 @@ int load_elf_binary(struct linux_binprm *bprm, struct image_info *info)
bprm->core_dump = &elf_core_dump;
#endif
- /*
- * If we reserved extra space for brk, release it now.
- * The implementation of do_brk in syscalls.c expects to be able
- * to mmap pages in this space.
- */
- if (info->reserve_brk) {
- abi_ulong start_brk = TARGET_PAGE_ALIGN(info->brk);
- abi_ulong end_brk = TARGET_PAGE_ALIGN(info->brk + info->reserve_brk);
- target_munmap(start_brk, end_brk - start_brk);
- }
-
return 0;
}
--
2.34.1
next prev parent reply other threads:[~2023-08-07 16:38 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-07 16:36 [PATCH for-8.1 v10 00/14] linux-user: image mapping fixes Richard Henderson
2023-08-07 16:36 ` [PATCH for-8.1 v10 01/14] linux-user: Adjust task_unmapped_base for reserved_va Richard Henderson
2023-08-08 9:10 ` Alex Bennée
2023-08-08 15:16 ` Richard Henderson
2023-08-08 16:59 ` Alex Bennée
2023-08-08 17:40 ` Richard Henderson
2023-08-08 15:35 ` Helge Deller
2023-08-07 16:36 ` [PATCH for-8.1 v10 02/14] linux-user: Define TASK_UNMAPPED_BASE in $guest/target_mman.h Richard Henderson
2023-08-08 9:19 ` Alex Bennée
2023-08-07 16:36 ` [PATCH for-8.1 v10 03/14] linux-user: Define ELF_ET_DYN_BASE " Richard Henderson
2023-08-07 16:36 ` [PATCH for-8.1 v10 04/14] linux-user: Use MAP_FIXED_NOREPLACE for initial image mmap Richard Henderson
2023-08-08 9:43 ` Alex Bennée
2023-08-08 11:57 ` Akihiko Odaki
2023-08-08 13:48 ` Alex Bennée
2023-08-08 14:08 ` Akihiko Odaki
2023-08-08 14:20 ` Alex Bennée
2023-08-07 16:36 ` [PATCH for-8.1 v10 05/14] linux-user: Use elf_et_dyn_base for ET_DYN with interpreter Richard Henderson
2023-08-08 9:49 ` Alex Bennée
2023-08-07 16:36 ` Richard Henderson [this message]
2023-08-08 10:54 ` [PATCH for-8.1 v10 06/14] linux-user: Adjust initial brk when interpreter is close to executable Alex Bennée
2023-08-07 16:36 ` [PATCH for-8.1 v10 07/14] linux-user: Do not adjust image mapping for host page size Richard Henderson
2023-08-08 10:59 ` Alex Bennée
2023-08-07 16:36 ` [PATCH for-8.1 v10 08/14] linux-user: Do not adjust zero_bss " Richard Henderson
2023-08-08 11:38 ` Alex Bennée
2023-08-08 15:56 ` Richard Henderson
2023-08-07 16:37 ` [PATCH for-8.1 v10 09/14] linux-user: Use zero_bss for PT_LOAD with no file contents too Richard Henderson
2023-08-08 11:43 ` Alex Bennée
2023-08-07 16:37 ` [PATCH for-8.1 v10 10/14] util/selfmap: Rewrite using qemu/interval-tree.h Richard Henderson
2023-08-07 18:17 ` Richard Henderson
2023-08-09 15:11 ` Fix interval_tree_iter_first() to check root node value Helge Deller
2023-08-09 15:23 ` Richard Henderson
2023-08-09 15:53 ` Helge Deller
2023-08-09 16:33 ` Richard Henderson
2023-08-10 21:31 ` [PATCH for-8.1 v10 10/14] util/selfmap: Rewrite using qemu/interval-tree.h Ilya Leoshkevich
2023-08-10 22:06 ` Helge Deller
2023-08-08 6:15 ` Michael Tokarev
2023-08-07 16:37 ` [PATCH for-8.1 v10 11/14] linux-user: Remove duplicate CPU_LOG_PAGE from probe_guest_base Richard Henderson
2023-08-08 11:45 ` Alex Bennée
2023-08-07 16:37 ` [PATCH for-8.1 v10 12/14] linux-user: Consolidate guest bounds check in probe_guest_base Richard Henderson
2023-08-08 11:46 ` Alex Bennée
2023-08-07 16:37 ` [PATCH for-8.1 v10 13/14] linux-user: Rewrite fixed probe_guest_base Richard Henderson
2023-08-08 16:39 ` Alex Bennée
2023-08-07 16:37 ` [PATCH for-8.1 v10 14/14] linux-user: Rewrite non-fixed probe_guest_base Richard Henderson
2023-08-08 16:58 ` Alex Bennée
2023-08-08 17:00 ` [PATCH for-8.1 v10 00/14] linux-user: image mapping fixes Alex Bennée
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230807163705.9848-7-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=akihiko.odaki@daynix.com \
--cc=deller@gmx.de \
--cc=laurent@vivier.eu \
--cc=pbonzini@redhat.com \
--cc=philmd@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).